Upload
jagan-kumar
View
90
Download
0
Embed Size (px)
Citation preview
MY PROFILE
JAGANKUMAR RAJUEmail: [email protected]; Date of Birth: 19thJuly, 1991Mobile No: +91-9944256951, 9941529377
PIPING DESIGN ENGINEERSeeking a challenging and rewarding opportunity with an organization of repute which recognizes and utilizes my true potential while nurturing my analytical and technical skills
PROFESSIONAL EXPERIENCE
Total Experience: 2+ Years
CAREER SUMMARY
Over 2 years of professional experience out of which 2+year’s experience with APR
Thermal Solution Private Limited as Piping Draftsman. Presently acting as Piping Designer
responsible for preparation of piping layouts for various units and off sites, Equipment Layout,
checking of Isometric drawing, Scope drawing for packages, Nozzle orientations,, Material Take
off, Review of vendor drawings etc. for Power plant, Refinery and Oil & Gas Projects.
RESPONSIBILITY:
Study of P&ID, Plot plan & Equipment GA Drawing
Study of piping study for layout constraints & Nozzle orientation
Preparation of MTO(MATERIAL TAKE OFF) from isometric drawing&3D model review,Review & implement client’s requirements
Preparation of Line list, Equipment List, Special Items List
Pipe thickness calculation as per ASME B31.3
Flange & Gasket selection as per ASME B16.5 & B16.20
Pipe rack Span & Spacing calculations, Piping Layout concepts for Pump/Compressor
etc…
Piping Layout concepts for Drum / Vessel / Exchanger / Air cooler etc…
Preparation of Supports for NON-IBR piping, Review & implement client’s requirements.
PDMS Model Exposure – Equipment / Structure / Pipework
Isometric drawing preparation,Review of Vendor drawings Equipment & Piping layout preparation, Co-ordination with client and other department
Lead Engineering.
EDUCATIONAL CREDENTIALS
B.E (Mechanical Engineering), 2012Anna University, Chennai,7.33 CGPAHSC, 2008Dhanalakshmi Srinivasan Higher Secondary School, Perambalur, 78.9%SSLC, 2006ThiruVIKa High School, Panickampatti, 80%Technical Skills SetCAD Tools Familiar: AutoCAD 2010, PDMS12.0.SP6.0 (Plant Design Management System)Office Tools Familiar: Windows 98/2000/XP/7, MS Office and Internet Application
Current EmployerCompany : M/S APR Thermal Solution Pvt ltdDesignation : Piping Design Engineer Department : Designing Duration : August 2012 to Feb 2015
CAREER HIGHLIGHTS
Having good exposure in Piping &MechanicalDesign of following Mechanical Equipment Involved in design of PHARMA PIPING, POWER PIPING &ATOMSPERICCONE ROOF
WATER TANK Piping Layout Drawings, Preparation of Erection Drawing (Isometrics), Bill of Quantities for
piping and pipe support material. Design of Process Piping and Component as per ASME B 31.3
ASME B31.3, ASME B16.5, ASME B16.47A/B, ASME, ASTM, API 650.
PROJECTS HANDLED IN DOMESTIC
Project 1#
Project: Animal Vaccine Manufacturing Plant Engg Service: Detailed Piping Engineering for Process & Utility Piping Process Consultant: Bio tree Pvt Ltd, Bangalore Customer: VETAL, Turkey
Preparation of Erection drawings (Isometrics drawings) Design Pipe Rack span no of Pipe rake needed the entire piping system, calculate of pipe
thickness the system. Preparation of General Arrangement Drawings & Fabrication Drawings Cutting plan Detail Drawings for BOTTOM, SHELL, and ROOF plate drawings. Preparation of nozzle Orientation drawings. Preparation of shell manhole, Roof manhole, vent nozzle, temperature hatch gauge
nozzle, level indicator nozzle detail drawings. Preparation of BOQ for pipes, plates, fittings, valves & nozzles…,
Project 2#
Project: 330 Foot Floating Mud Plant Barge-Supreme Energy 2.
Client: Offshore Construction Service Pvt LtdOwner: RIGWISE Pvt Ltd Project: Revamping Of Well Head Platform pipe Lines.Client: Cairn Energy India Ltd
Modeling of Equipment’s (Like Horizontal Vessels, Vertical Vessel & Pumps etc.) Based on Vendor G.A drawings for the individual area.
Generation of Isometrics, with Bill of material. Coordination with inter-intra Departments. Clash checking
Piping study and preparation of piping layout Extracting of Piping Isometrics.
Material Take Off (MTO).
PROJECT WORKED (ACADEMIC)
Title: Comparative Study on Different Welding on Low Alloy Steel in as Weld and
PWHT Condition.
Tool: Low alloy steel (SA 387 Gr 12 cl2)
Synopsis: Welding, one of the vital processes in any industry has evolved leaps and
bounds all through these years. Although many advanced joining process is available
in the current scenario, the Indian industry accounts for 80% with conventional
joining process. In this project, an effort is made to study the welding of low alloy
steel (SA 387 Gr 12 cl2) using four different conventional welding process, namely
Shielded metal arc welding (SMAW), Submerged arc welding (SAW), Tungsten
inert gas welding (TIG), Metal inert gas (MIG).The mechanical property of the
weldment is evaluated both in as welded and PWHT (Stress Relieved) condition.
The results of this project will enable us to select a suitable process for the required
application.
PERSONAL ACHIEVEMENTS Paper Presentation done in our College Function.
Completed P.G.Diploma in Piping Design with PDMS (PDMS 12.0.SP6.0 - Plant design management system).
EXTRA-CURRICULAR ACTIVITIES
I have participated NSS camp & zonal, ties level sports.
CO-CURRICULAR ACTIVITIES
In plant training: Undergone in plant training in Ashley AL teamsInd ltd, cheyyar,
kanchipuram DT
PESONAL DETAILS
Address of Permanent : 134, PanickampattiNallur, T.Marudur ,
Kulithalai TK, Karur DT,
Pin-639107.
Father’s name : Raju.E
Date of Birth : 19.07.1991
Sex : Male
Nationality : Indian
Marital Status : Single
Languages Known : English, Tamil
Pass Port No : J9105108 up to 25.07.2022
Strength : Smart worker, Optimistic Thinking,
Problem solving abilities, Willingness to learn.
Hobbies : Playing Games
DECLARATION
I hereby declare that the information furnished above is true to the best of my knowledge and belief.
Place: Date: (JAGANKUMAR.R)