Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
Confidential
NCP1095/NCP1096 Latest 802.3bt PoE-PD Interface Controllers
PoE System Architecture and standards (IEEE802.3xx):PSE(Power Sourcing Equipment)
PowerAC line
UPS48V
PD(Powered Devices)
ON’s PoE-PD Solutions
Technology IEEE Standard PoE Types PSE Out (W) PD In (W) Release date
PoE IEEE 802.3af 1 15.4 12.95 2003
PoE+ IEEE 802.3at 2 30 25.5 2009
PoE++/4Pair PoE/UPoE IEEE 802.3bt 3 60 51 Q1-2019
Higher-Power PoE IEEE 802.3bt 4 100 71 Q1-2019
PoE– PD Interface Controllers Evolution Power over Ethernet – PD Interface Controllers Evolution
Applications:• Point of sales/retail• Video Conferencing• Hospitality• IP Security Cameras• Industrial (Motor
Control Units)• LED lighting
IEEE 802.3afPoE-PD Controller
NCP1090 (22W)NCP1091 (22W)
NCP1092 (22W+AUX)
PoE-PD Contr.+DC-DC Conv.NCP1080 (22W)
NCP1082 (22W+AUX)
IEEE 802.3atPoE-PD Controller
NCP1093 (40W)NCP1094 (40W+AUX)
PoE-PD Contr.+DC-DC Conv.NCP1081 (40W)
NCP1083 (40W+AUX)
IEEE 802.3btNew High Power
PoE-PD ControllerNCP1095 (100W)
NCP1096 (100W+int FET)
• LED lighting
Next generation high power PoE devices enable wired connected lighting
Power [W]
In Production
Pin-to-Pin compatible with: TPS2375-TPS2376-TPS2377
ON’s PoE-PD Solutions
Active Bridge or diode bridge
High voltageTVS, ESD protection
PoE-PD ICs
DC/DC Converter
Or Controller
Diodes , Optocouplers,
and Shunt References
RDET
NCP1090
VPORTN
CLASS
AUX
RTN
VPORTP
PGOOD
NCP1031
GND
COMP
OV
UVPowered
Application
VSUP
VNEG
DATA
INRUSH
DETNSP5804
DA+
DA-
DB+
DB-
DC+
DC-
DD+
DD-
RJ45
1
2
3
6
4
5
7
8
NPA0
08TA
NPA0
08TA
RCLASS
RINRUSH
DF01S2
DF01S2
ESD8004
To PHY
CT
VCC
VFB
VDRAIN
ON offers a complete solution covering up to the new .bt standard
PoE-PD Interface Product FamilyDetection: compatible device detection to avoid non compatible IP damages
Classification: PSE gets info on PD’s requested power budget
Startup and operation: power management
Disconnect upon various events (cable disconnected, shorts…)
PoE-PD Interface Features and Benefits
7/2/196
Differentiating features Typical application schematics
Other features & specifications
Interface controller negotiates power and protection for devices powered by Ethernet cables
– Programmable classification current– Temperature monitoring, with max Tj to 150°C– Adjustable UVLO option– Integral thermal shutdown– 3.0 kV cable ESD protection to protect against hot swap events
that can occur in harsh environments and outdoor installations
– IEEE 802.3af (13.5W) and .3at (25W) compliant devices, allowing support for both power hungry devices and existing PoE applications
– Integrated DC-DC covertor in NCP108X series, providing power delivery and regulation to the application
– Non standard 40W capability with .3at devices– Operation current limit up to 1100 mA, for extended power
ranges (NCP1081/83)– Option for auxiliary supply support– Open drain power good indicator– Low on resistance hot swap switch
Evaluation board – NCP1095GEVB and NCP1096GEVB
Greenbridge2
Power connector
Logic connector
Indication AUX
NSP5804 footprint
TVS Magnetics
Buffer cap
Classification resistors
NCP1095 Pass
transistor Sense
resistor
Integrated hot swap transistor and current sense resistor with the NCP1096.