ND-JX-V29/59-AVM+LED Specification - NODKA Industrial · 1. Performance Overview The product positioning / high-end LCD + LED AV / MONI TOR combo program, using MSTAR single-chip

ND-JX-V29/59-AVM+LED Specification

(LCD / LED AV plate movement)

Document Number: ND-JX201303300

DATE: 2013/ 02/ 29

APPROVED BY NOTE

CUSTOMER SIGNATURE (S)

ISSUED BY CHECKED BY APPROVED BY

Table of Contents

Page number Content

1 Front cover

2 Directory

2 Version History

3 Performance Overview

3 The main technical parameters

4 Exterior Photos

4 The main interface definition description

9 PCB structure size

10 Electrical properties

10 Precautions

10 Remark

Version History

Version Date Page Description

V1. 0 2013. 03. 30 A9 First Edition

Note: This specification provides for reference only; If the products are different in kind

1. Performance Overview The product positioning / high-end LCD + LED AV / MONI TOR combo program, using MSTAR

single-chip TV processing IC, with good quality, multi-functional, rich interfaces, systems and other sophisticated features, support for full color / sound system, mainly for 32 "and smaller TV designed to support the market at present commonly used LCD / LED, plasma screens.

Full 3D Inter l ace, 2D video decoding, 2D digital noise reduction, (V59 for the 3D video decoder, USB function support) Built-in audio processing, volume, mute, treble, bass, balance function;

Analog Audio Amplifier: Maximum output power 2X3W (4 ohms). Input signal: AVIN, YPBPR, VGA x 1, HDMI (1.3). Supports screen resolution of 1920 * 1080, two 6 / 8bi t LVDS signal output, 120Hz external

adapter plate. Support headphone output, built-in interface extensions rich, multi-language OSD menu for

the screen voltage selectable 3. 3V / 5V / 12V.

2. The main technical parameters

Video Input Computer

Resolution Highest 1920*1080 Line frequency 30~90KHz Field frequency 56~75Hz

CVBS Signal CVBS=1.0Vp-p +/-5% HDMI 480i、480p、576i、576p、720p、1080i、1080p

Sound

Audio Frequency Response ±3dB

Left and right channel separation

70dB

Distortion (THD) 1. 5～2% Signal to noise ratio (S / N) 80 dB

Amplifier 2 *3W（4Ω）

Power supply

Input Voltage 12V For screen voltage 3.3V/5V/12V Backlight voltage 12V

Standby Current Low power consumption, standby power consumption

<1W

OSD language Chinese English French German Italian Spanish Russian Arabic Persian and

other languages optional

Key Functions POWER/MENU/SOURCE/UP/DOWN/LEFT/RIGHT Comb Filter 2D De-Interlace 3D

Noise Reduction 2D NICAM With) TXT With (optional) V-CHIP,CC,WSS,VPS With (optional)

Screen Resolution 1920*1080

USB (digital multimedia) supported formats Video multimedia playback support specifications

File Name Note Video decoding Specification Bit Rate

DAT, mpg, mpeg MPG,MPEG Mpeg1,2 1920x1080@ 30P 20Mbit/sec MPEG2 -TS

VOB MPEG2 -PS MPEG2 1920x1080 @ 30P 20Mbit/sec MPEG4 RM code RV8, RV9,

MKV MKV H.264, MPEG1,2,4 1920x1080 @ 30P 20Mbit/sec MPEG2, MPEG4 ASF

Multimedia player supports standard sound

Digital Multimedia Support Photos Specifications

Audio codec File Name Bit Rate

MPEG1 Layer2 MP3 32Kbps ~ 448Kbps(Bit rate)

32KHz ~ 48KHz(Sampling rate)

MPEG1 Layer3 MP3 32Kbps ~ 320Kbps(Bit rate)


AC3 N/A(work with video files only) 32Kbps ~ 640Kbps(Bit rate),32KHz,

44.1KHz, 48KHz(Sampling rate)

EAC3 N/A(work with video files only) 32Kbps ~ 6 Mbps

32KHz, 44.1KHz, 48KHz(Sampling rate)

AAC, HEAAC M4A/AAC 24Kbps ~ 384Kbps(Bit rate)


WMA WMA/ASF Bitrate : 128bps ~ 320Kbps

Sampling Rate: 8KHz ~ 48Khz

PCM N/A(work with video files only) Bitrate: 64Kbps ~ 1.5Mbps


IMA-ADPCM/MS-ADPCM N/A(work with video files only) Bitrate: 384Kbps


LBR N/A(work with video files only) Bitrate: 6Kbps ~ 96Kbps


Comment picture Reso lu t ion T2 &Pluto Resolution T3/T4

JPEG Base-line 8192x8192 15360x8640

Progressive 1024x768 1024x768

PNG non-interlace 9000x6000 9600x6400

interlace 1200x768 1200x800

BMP 9000x6000 9600x6400

Note: Some video and audio formats require customers to provide a corresponding patent before opening; example: AC3, DIVX

Sound

Audio Frequency Response ±3dB

Left and right channel separation

70dB

Distortion （THD） 1. 5～2%

SNR （S/ N） 80 dB

Amplifier 2 *3W（4Ω）

Power supply

Input Voltage 12V

For screen voltage 3.3V/5V/12V

Backlight voltage 12V

Standby Current Low power consumption, standby power consumption <1W

OSD language Chinese English French German Italian Spanish Russian Arabic Persian and other languages optional

Key Functions POWER/MENU/SOURCE/UP/DOWN/LEFT/RIGHT

Comb Filter 2D De-Interlace 3D

Noise Reduction 2D NICAM With)

TXT With (optional) V-CHIP,CC,WSS,VPS With (optional)

Screen Resolution 1920*1080

3. Exterior Photos

4. The main take-defined instruction

No. Description No. Description

1 Built-pin power input connector seat 2 (12V) power inverter control interface

3 Lights, I R, key board input and output interfaces

4 Optional interface for screen voltage (3. 3V/5V / 12V)

5 LVDS signal output interface 6 Y PB PR input pin holder

7 VGA signal built-in input pin holder 8 Built-in voice input pin VGA seat

9 Speaker sound output interface 10 Built-in HDMI high-definition signal input pin holder

11 12 13 14

LED output pin holder 15 VGA audio signal input terminal

16 VGA signal input terminal 17 Interface USB signal reading

18 HDMI high-definition signal input terminal

19 AV2 video input BNC / AV Block

20 AV1 video input BNC / AV Block 21 AV3 input video signal built-needle t

22 AVOUT video signal output BNC / AV Block

23 AVOUT video signal output, built-in left and right channel output pin Seat

24 AV / AV2 / left channel built-in input pin

holder 25 External power supply DC Interface

1、12V power input interface Bit No. ：CON1 (PH2.0/2.0MM*4PIN）

Pin Definition Description：

Pin No. Name Explanation

1 12V +12V Power Input

2 12V +12V Power Input

3 GND Ground

4 GND Ground

Note: Before the power supply must first check the power cord is connected correctly, otherwise it will damage the motherboard and power supply

2、12V inverter power control interface Bit No.:CON3 (PH2.0MM*6PIN）



1 GND Ground

2 GND Ground

3 ADJ Dimming,0-5V / (0-3.3V) adjustable

4 BL Switch control, 1: ON, 0: OFF

5 +12V 12V power

6 +12V 12V power

3、LEDs, IR, key board input interface Bit No.:CON12 (PH2.0MM*13PIN)



1 CH- Program minus key / direction / or other defined

2 CH+ Program plus key / direction / or other defined

3 MENU Menu key / or other defined

4 SOURCE Program source key / or other definitions

5 VOL- Volume down button / direction / or other defined

6 VOL+ Volume increase button / direction / or other defined

7 GND Ground

8 LED-G The green light / bright normal working hours

9 LED-R Red light / standby light

10 POWER Power key / or other defined

11 GND Ground

12 IR-IN The remote control signal receiving port

13 VCC 5V power supply (remote power supply)

4、Optional interface for screen voltage Bit No.:CON4 SIP2.54MM*2/3PIN Pin Definition Description：


1 foot 3.3V 3.3V Power Interface

2 foot 5V 5V Power Interface

3 foot 3.3V 3.3V Power Interface

4 foot Screen Power Power input interface screen

5 foot Screen Power Power input interface screen

6 foot Screen Power Power input interface screen Note: Before the power supply voltage must be checked to the screen using the screen must be based on the needs of the time to choose, choose whether it will damage the screen

5、8/ 10 Position LVDS Output Interface Bit No.:CON11 (SIP2.0MM*30PIN) Pin Definition Description：

Pin No. Name Explanation 1 VCC Power for the screen 2 VCC Power for the screen 3 VCC Power for the screen 4 GND Ground 5 GND Ground 6 GND Ground 7 LVA0- LVDS even lines on the negative side 0 8 LVA0+ LVDS dual line on the positive side 0 9 LVA1- LVDS even lines on the negative side 1

10 LVA1+ LVDS dual line on the positive side 1 11 LVA2- LVDS even lines on the negative side 2 12 LVA2+ LVDS dual line on the positive side 2 13 GND Ground 14 GND Ground 15 LVACK- LVDS dual line on the negative side of the clock 16 LVACK+ LVDS dual line positive terminal of the clock 17 LVA3- LVDS even lines on the negative side 3 18 LVA3+ LVDS dual line on the positive side 3 19 LVB0- LVDS odd lines on the negative side 0 20 LVB0+ LVDS odd lines on the positive side 0 21 LVB1- LVDS odd lines on the negative side 1 22 LVB1+ LVDS odd lines on the positive side 1 23 LVB2- LVDS odd lines on the negative side 2 24 LVB2+ LVDS odd lines on the positive side 2 25 GND Ground 26 GND Ground 27 LVBCK- LVDS odd lines on the negative side of the clock 28 LVBCK+ LVDS odd lines on the positive terminal of the clock 29 LVB3- LVDS odd line of three negative side

30 LVB3+ LVDS odd lines on the positive terminal 3

6、Built-Y PB PR signal input interface Bit No.：CON22 (PH2.0MM*6PIN) Pin Definition Description：

7、Built-in VGA (RGB tricolor) signal input interface Bit No.:CON17 (PH2.0MM*12PIN) Pin Definition Description：


1 SCL DDC Clock signal communication (as clock literacy

program)

2 SDA DDC Data signal communication (literacy program as

data)

3 GND Ground

4 VGA-B Blue video signals

5 GND Ground

6 VGA-G Green video signals

7 GND Ground

8 VGA-R Red video signals

9 GND Ground

10 VGA-HS The horizontal sync signal input

11 VGA-VS Vertical sync signal input

12 GND Ground

8、Built-in voice input pin VGA seat Bit No.: CN15 (PH2.0MM *3PIN) Pin Definition Description：


1 GND Ground

2 Y Y Signal Input

3 GND Ground

4 PB PB Signal Input

5 GND Ground

6 PR PR Signal Input

Pin No. Name Explanation 1 PC_LIN Left channel input

2 GND Ground

3 PC_RIN Right channel input

9、Speaker sound output interface Bit No.: CON26 (PH2.0/2.0MM*4PIN) Pin Definition Description：

10、HDMI Built-in high-definition signal input pin holder Bit No.：SPI1 (SIP2.0MM*30PIN)



1 RX2- Even HDMI cable on the negative side 2

2 RX2+ Even HDMI cable on the positive terminal 2





7 RXC- Even HDMI the negative side of the clock line

8 RXC+ Even HDMI the negative side of the clock line

9 SDA HDMI Data transfer foot

10 SCL HDMI Clock transmission feet

11 GND Ground

12 GND Ground

13 HDCP HDCP Protocol to transmit foot

11、LED output interface Bit No.：CON31 (PH2.0MM*4PIN) Pin Definition Description：


1 ROUT+ Right channel output +

2 ROUT- Right channel output -

3 LOUT- Left channel output -

4 LOUT+ Left channel output +


1 LED+ LED Output +

2 LED- LED Output -

3 LED- LED Output -

4 LED+ LED Output +

5. PCB structure size

6. Electrical Properties

Parameter Minimum (MIN) standard(TYP) Maximum (MAX) Unit

Operating Voltage 11. 25 12 13. 25 V

Standby voltage 4. 75 5 5. 6 V

Standby Current 10 30 40 MA

Operating Temperature -12 75 ℃

Storage Temperature -20 85 ℃

Humidity 40 95 %

Storage humidity 40 95 %

7. Precautions

1、On the supply front power must first check the power cable is properly connected,

the display supply voltage is correct, otherwise it will damage the motherboard, power

supply and display

2、Installed in the warehouse and must take anti-static and leakage protection

measures, otherwise it will damage the motherboard and components

3、First installed in front of the customer to confirm the function is consistent with the

requirements of the motherboard, do not wait installed after the discovery was too late,

resulting in serious consequences

4、Please do not activities motherboard and plug the drive power connector board work,

in order to avoid contact with conductive objects will damage it.

5、Found in the installed defective Products, please installed anti-static bag from the

whole place, refund will play Division I repair, do not throw litter.

6、If the board surface stains, Please use a soft dry cloth to clean off.

7、Do not under pressure, bending, and rain will play damaged.

Documents

ND-JX-V29/59-AVM+LED Specification - NODKA Industrial · 1. Performance Overview The product positioning / high-end LCD + LED AV / MONI TOR combo program, using MSTAR single-chip