NeSSI™ Connectivity Discussion

Pico (M8 Ø8) Euro (M12)Style Style

Snap-on SpeedLockScrew-on Screw-on

Wire size & pins Wire size & pinsReceptacles Receptacles

PCB PCB Leaded Leaded

Right RightStraight Straight

Daisy Chain Daisy Chain

Junction Junction

Pico (M8 Ø8)2-wire + drain wire 24AWG, foil shield

4A 125VAC/VDC (Pin rating)(other pin and wire configurations possible but not

relevant to FF)

StyleØ8 - Snap-on (minimal applications at less than 0°C)

Snaplock material POM (nylon)Overmold body – PUR

M8 - Screw-on Collars – Nickel platted brass, or 316SS

Overmold body – PUR

(M8 Ø8) Available in Right or Straight body

Note: a new pin convention and wire standard would be required by FF

Female Picofast® fieldwireable connector

Male Picofast® PCB right angle connector Male Picofast® straight leaded end connector

Daisy Chain Picofast®

Junction Picofast® drops Eurofast® trunk

Eurofast® M12 (Pin convention already established by FF)2-wire + drain wire 18AWG, foil shield

2-wire + drain wire + local ground wire 18AWG, foil shield

2-wire + drain wire 24AWG, foil shield2-wire + drain wire + local ground

wire 24AWG, foil shield

StyleM12 – Speedlock® (Being release now, no experience at low temperatures – will be backward compatible)M12 - Screw-on Collars – Nickel platted brass, or 316SS

Overmold body – PUR

Note: a new wire standard would be required by FF for 24AWG

Female Eurofast® fieldwireable connector

Male Eurofast® PCB right angle connector Male Eurofast® straight leaded end connector

Daisy Chain Eurofast®

2-wire + drain wire 24AWG, foil shield2-wire + drain wire + local ground wire 24AWG, foil shield

VBRSplitter Body

2-wire + drain wire 18AWG, foil shield 2-wire + drain wire + local ground wire 18AWG, foil shield or

2-wire + drain wire 24AWG, foil shield2-wire + drain wire + local ground wire 24AWG, foil shield

VB2Splitter Body

Junction Eurofast® drops Eurofast® trunk

Sampling of M8 & M12 receptacles and cordset

eric.sipe@turck.com