NetIron 40G Datasheet - Spectra Equipmentmet and customer satisfaction remains high. Foundry Networks’ NetIron 40G leverages its technology heritage to deliver fourth-generation

DATASHEET

NETIRON 40G 10GBE SERVICES ROUTER

May 2004 © 2004 Foundry Networks, Inc. All Rights Reserved. 1

FOU

ND

RY

NET

WO

RK

S D

ATA

SH

EET

Foundry Networks’ NetIron 40G is the next generation terabit-capacity 10GbE router designed to meet tomorrow’s mission-critical, high-performance 10 Gigabit Ethernet switching and routing needs today. It is the industry’s first true 40Gig-ready router to offer wire-speed, non-blocking performance of up to 1.5 billion packets per second, per 7-foot telco rack. Purpose-built for high-speed networks, the NetIron 40G offers service providers the platform they need to keep up with the growing demands being driven by explosive metro growth. As more high-speed broadband capabilities become available to both business and residential customers, network infrastructure needs to stay ahead to ensure that service level agreements (SLAs) are met and customer satisfaction remains high. Foundry

Networks’ NetIron 40G leverages its technology heritage to deliver fourth-generation ASICs in a highly distributed and scalable 10GbE routing platform while reducing the operational expenditures (OpEx) associated with the ongoing support of the network. The NetIron 40G router offers a complete and robust set of standards-based IP routing protocols, including BGP4, OSPF and IS-IS, designed to scale with service provider needs. The efficient design of the NetIron 40G supports up to 32 10GbE and 320 1GbE ports per system and up to 96 10GbE and 960 1GbE ports per standard 7-foot telco rack, giving the service provider over 4 Terabits of performance, increasing revenue per rack potential. Built with stringent carrier-class environmental considerations, the NetIron 40G, is designed from the ground up to meet and go beyond NEBS∗ Level 3 requirements.

The NetIron 40G is the newest member of the NetIron family of products, which offers a full range of modular router systems. From a compact 4-slot system to 8-slot and 15-slot systems, NetIron allows service providers to standardize on a single product family for Multi Tenant Unit (MTU), Provider Edge (PE), and Provider Core (P) to the Internet Edge (IE) applications. NetIron routers allow service providers to offer multiple services over a common metro network to generate incremental revenue with minimal additional investments. Metro solutions built with NetIron routers improve service velocity with rapid service provisioning, accurate accounting, and billing services.

Key Features and Benefits • Fourth generation TerathonTM ASIC technology for built-in future proofing delivers 40

Gigabits per slot and over 1.28 Terabits of switching capacity for wire-speed, non-blocking switching and routing of up to 480 million packets per second.

• Unparalleled non-blocking 10GbE and 1 GbE port density of up to 32 non-blocking 10 Gigabit Ethernet or 320 Gig Ethernet ports within an 8-slot chassis and up to 96 10 Gigabit Ethernet or 960 Gig Ethernet ports in a standard 7-foot telco rack allow service providers to maximize revenue per rack unit.

• Purpose-built, super-fast route processors and the ability to perform hardware-based, ultra-low latency routing for up to 1 Million IP routes per 10GbE interface module ensures smooth operations for demanding service provider networks.

∗ NEBS compliance testing currently underway

DATASHEET



FOU

ND

RY

NET

WO

RK

S D

ATA

SH

EET

• Large-Scale IP service delivery designed to grow with service provider needs, using comprehensive and robust set of standards-based IP routing protocols, including BGP4, OSPF and IS-IS.

• Foundry Direct Routing1 (FDR), for wire-speed forwarding and accelerated convergence.

• Dedicated control plane with direct access to each interface module across a 20 Gbps management cross-point fabric separates management and system control traffic from the normal user data plane to create a robust, fault-tolerant, intelligent high-performance 10GbE system.

• End-to-end QoS delivery across the service provider cloud with Advanced Bandwidth Management1 (ABM) features.

• Carrier-class system and network reliability includes support for redundant management modules with Hitless Management Failover1 (HMF), hot-swappable power supplies, variable-speed fans and interface modules with hot-pluggable XENPAK optics.

• 80 Gbps of cross-module link aggregation based on 802.3ad for resilient bandwidth scalability between any two NetIron 40G 10GbE routers.

• Built-in sFlow™ technology (RFC 3176) delivers scalable network monitoring, accounting and billing at 10Gbps speed using Layer 2 – 7 per-port information, offering detailed capacity planning and security analysis solutions.

NetIron 40G Feature Specification

Interface Slots 8 System switching capacity 1.28 Tbps Switching capacity per 7’ rack 4 Tbps Routing performance per system* 480 Million pps Routing performance per 7’ rack 1.5 Billion pps Max 10GbE ports per system 32 Max 10GbE ports per 7’ rack 96 Max 1 Gig E. ports per system 320 Max 1 Gig E. port per 7’ rack 960 Height (inches/Rack units) DC Version

22.75/13 RU

Power supply redundancy 1+1

*Million Packets per second (Mpps) numbers are aggregate based on switching capacities of the line cards

Purpose-built Feature Set for Metro and Service Providers

Industry Leading Performance The NetIron 40G is the first to offer 40 Gig ready Ethernet routing on a highly scalable platform built with next generation switching and routing in mind.

• Industry's highest 10GbE routing performance — Non-blocking, distributed switching architecture with a parallel cross-point switch fabric provides up to 1.28 terabits per second of aggregate routing capacity, and 480 million packets per second routing performance.

DATASHEET



FOU

ND

RY

NET

WO

RK

S D

ATA

SH

EET

• Fourth-generation TerathonTM ASICs – Makes it possible to deliver the level of performance and functionality demonstrated by the NetIron 40G. Over 80 million transistors are packed into one ASIC to produce a highly scalable, non-blocking backplane switch fabric.

• 40 Gig ready – Future proof your investment without costly upgrades. Each of the interface slots in the NetIron 40G are capable of supporting 40 Gbps Full Duplex of non-blocking traffic to any other interface module for investment protection.

High-Availability Platform The NetIron 40G was designed with hardware and software reliability required for demanding service provider networks. The NetIron 40G employs a very distributed processing architecture to ensure that wire-speed performance levels are maintained, while minimizing faults to the interface module level.

• Redundant, hot-swappable components – offer non-stop service delivery.

o Management module – The system can be configured with dual management modules with sub-second detection and fail-over capabilities.

o Hitless Management Failover (HMF) – Management module failover can be performed in a stateful manner, maintaining all the Layer 2 and Layer 3 information required for packet forwarding*. This allows for non-stop forwarding of traffic even in case of failure, and hence, enhances the overall service availability.

o Variable-speed fans – The cooling sub-system comes with 2 variable-speed fans that can be controlled by software and auto-adjust to meet airflow demand. The fans are independently hot-swappable while the system is running. Each fan comes with its own hot-swappable fan control relay.

o Native –48v DC – The system runs on dual DC power built into the system, designed to connect directly to a central office power grid.

o Optional AC power rack – In addition to DC power, the NetIron 40G can be equipped with a 2 RU AC power shelf that can take up to 6 load-sharing AC power supplies for 1+1 redundancy.

• Distributed Routing Architecture – Utilizes state-of-the-art ASIC and high-speed memory technology on each interface module to provide a highly distributed, intelligent, packet-processing architecture.

• 80 Gigabit link aggregation based on IEEE 802.3ad — Improves reliability and performance, while reducing the operations overhead, by dynamically combining up to eight cross-module 10 Gigabit Ethernet ports together, providing a single highly redundant connection between two switches.

• Network-level redundancy protocols for Layer 2 and Layer 3 networks — Provide carrier-class resiliency in case of link or system failures. VRRP and VRRPe provide redundancy in Layer 3 networks while MRP, VSRP, and RSTP provide SONET-like resiliency in Layer 2 networks.

* Initial release will target layer-2 switched applications.

DATASHEET



FOU

ND

RY

NET

WO

RK

S D

ATA

SH

EET

Robust Layer 3 Feature Set Foundry’s Metro IronWare software suite includes advanced proven, Internet-strength, scalable EGP and IGP routing protocols deployed extensively by Internet Peering routers and major ISPs in very large routing environments.

• BGPv4 — Internet-proven with support for 4 million routes, 500 peers and 14000 attributes. route-flap dampening, confederations, route-reflectors, route-maps, and peer groups.

o IBGP and EBGP o Route Redistribution o Load-sharing/multi-homing o Fast External Fail over o Route Map o Route Refresh o BGP route filtering based on

IP address ACL o Community ACL

o AS-Path ACL o Prefix-list

o Route Reflectors o Confederations o Peer Groups o User attributes and

community o ECMP Load Sharing on up to

8 paths o Route flap dampening o Route flap optimization o MD5 Authentication o BGP-Guard1

• OSPF — Robust scalability with support for over 800,000 routes.

o OSPF Stub Area, Totally Stubby Area, & Not-so-Stubby Area

o Virtual Link o External Route

Summarization o MD5 Authentication o Route Redistribution

o LSDB Overflow Handling o Group LSA Pacing o ECMP Load Sharing on up to

8 paths o Route filtering based on IP

address ACLs & redistribution filters

• IS-IS — Support for Level 1 and Level 2, includes 25,000 routes and 512 adjacencies.

o Dynamic Host Name Exchange o Routing in TCP/IP and Dual Environments o Domain-wide Prefix Distribution

• Foundry Direct Routing (FDR) — Large scale hardware based routing with the capacity to support twice the whole Internet routing table in hardware allowing room for future growth. Pre-programming of the forwarding entries in hardware regardless of the existence of network flows allows for very fast convergence for network flows in case of link failure, node failure, or route withdrawal. Enhanced network wide stability via hardware dropping of packets targeting unknown destinations.

• Policy based Routing (PBR) — Provides customized routing decisions based on source address, allowing Metro customers to maintain single configurations while having access to different service offerings such as enhanced security, increased flexibility and access to preferred ISPs.

• Comprehensive multicast feature set — Provides hardware-based multicast support including DVMRP, MSDP, PIM-SM (Sparse Mode) and PIM-DM (Dense Mode) protocols, allowing network managers to efficiently deploy next-generation streaming media applications for improved employee collaboration and productivity.

• VRRP and VRRPE (Enhanced VRRP) — Enable the NetIron configured as a router to act as a backup to other routers in the network. In the event of a router failure, the NetIron will

DATASHEET



FOU

ND

RY

NET

WO

RK

S D

ATA

SH

EET

automatically and seamlessly perform the tasks of the failed router. VRRPe extends the capabilities of VRRP by providing network managers the convenience of a virtual interface to aid in traditional IP troubleshooting tools to ensure that a default router is actually up and operational.

Industry Leading Layer 2 Features Today’s routers are also being deployed at the edge of the network as well as farther into the Metro network reaching closer to the Enterprise to offer alternative private line services using the advantages of 10GbE. The NetIron 40G offers extensive features directly aimed at Layer 2 Metro service providers.

• Metro Ring Protocol (MRP) — Offers an alternative to Spanning Tree based designs and provides sub-second fault detection and a fail-over specifically for Metro Ethernet ring topologies. MRP works in conjunction with VSRP and 802.3ad based link aggregation to provide bandwidth scalability and SONET-like resiliency in Metro Ethernet networks.

• Virtual Switch Redundancy Protocol (VSRP) — Offers an alternative to Spanning Tree based designs and provides sub-second fault detection and fail over protocol for mesh topologies. VSRP works in conjunction with MRP to provide SONET like resiliency required for critical Data Center and Metro Ethernet networks and protects against link or switch failures.

• Foundry's next generation STP innovations — Foundry’s innovative features such as SuperSpan, Rapid STP (802.1w) and Per VLAN Group STP (PVGST) based on 802.1s, dramatically improve the availability and scalability of Spanning Tree based networks.

o Single-instance STP — Provides a single instance of STP to run on all the port-based VLANs within a single device, enabling NetIron systems to support third-party devices that run a single STP instance in accordance with the 802.1q specification.

o Rapid Spanning Tree Protocol based on IEEE 802.1w — Dramatically improves the spanning tree convergence time to sub-second by automatically renegotiating port roles in case of a link failure without relying on timers.

o Per VLAN Spanning Tree (PVST) — Allows Metro service providers control over STP on an individual VLAN basis to provide traffic engineering.

o Per VLAN Group Spanning Tree (PVGST) — Allows Metro service providers dramatic improvements in STP and VLAN scalability by servicing up to 4,096 VLANs with 2 to 16 STP or Rapid STP instances. PVGST also provides VLAN load balancing for all 4,096 VLANs for efficient utilization of all fiber in a Metro network.

o Topology Groups – Goes beyond PVGST to scale all supported Layer 2 control protocols including STP, RSTP, MRP and VSRP while providing to ability to isolate the provider from any subscriber-influenced changes.

o SuperSpanTM — A unique innovation from Foundry that allows Metro service providers to build very large Layer 2 Metro Ethernet networks while simplifying manageability and network operations. SuperSpan gives Metro service providers the ability to tunnel BPDUs, and organize the network into smaller, faster converging, easy-to-manage standards-based STP domains using, while being isolated from STP changes caused by subscriber network settings.

• Super Aggregated VLANs (SAVs) — Allows service providers to decouple the provider VLAN domains from customer VLAN domains. SAVs extend the number of 802.1q based VLANs beyond 4096 by aggregating traffic from multiple VLANs for a single customer into a single provider VLAN. This allows service providers to carry traffic for up to 16 million VLANs

DATASHEET



FOU

ND

RY

NET

WO

RK

S D

ATA

SH

EET

in a metro network by serving up to 4096 customers, with each customer using up to 4096 VLANs.

• High Performance Layer 2 Multicast — Offers efficient handling of multicast traffic in Layer 2 environments such as Internet exchanges and Metro access networks.

o PIM Snooping – Dramatically improves the performance of multicast applications such as streaming video in a Layer 2 Metro by optimizing PIM traffic between Layer 3 multicast devices that otherwise would propagate traffic to all VLAN port members.

o IGMP Snooping – Hardware-based multicast support that forwards only a single copy of a transmission to only the requesting port. Foundry’s Terathon ASICs are unique in their ability to replicate 802.1Q tagged multicast packets across multiple VLANs over one or more physical ports.

Advanced Quality of Service (QoS) • Advanced QoS — Allows administrators to enforce or change traffic priority based on port,

VLAN, source MAC, ACL, 802.1p, Type of Service (ToS) or DiffServ settings, to prioritize business-critical flows.

• Ultra-low latency — Industry-leading port-to-port latency of 10 to 20 microseconds for superior call quality when using VoIP and other latency-sensitive traffic such as video.

• Multiple queuing methods — Strict Priority (SP) or Weighted Fair Queuing (WFQ) provides flexibility for network administrators in enforcing traffic prioritization.

• Advanced Bandwidth Management (ABM) — Allows intelligent bandwidth management using hardware based enforcement of Committed Information Rate (CIR) with Excess Burst control capabilities and seamless integration with other advanced QoS features like priority marking and honoring. Bandwidth allocation can be made per port, per port and traffic priority level, or down to the Layer 2 & Layer 3 flow level (using Foundry’s unique Layer 2 and Layer 3 ACL capabilities).

Supports the creation of Ingress rate classes based on:

o Ingress Port o Ingress Port + Packet Priority o VLAN ID o VLAN ID + Packet Priority o VLAN Group o Layer-2 ( SA MAC address) o Layer-2 ACL-based (includes DA MAC, SA MAC, VLAN ID, Ether-Type) o Layer-3 ACL-based (includes Src IP, Dst IP, Src Port, Dst Port, ToS/DSCP)

Supports the creation of Egress rate classes based on: o Egress Port

Cohesive, Unified and Easy-To-Use Network Management • Centralized network management — Foundry's IronView Network Manager is a web-

based, graphical interface tool that empowers network operators to seamlessly control software and configuration updates for any Foundry product from a central station. This dramatically simplifies network provisioning, diagnostics and resolution, thus reducing the operational expenses.

DATASHEET



FOU

ND

RY

NET

WO

RK

S D

ATA

SH

EET

• Command Line Interface (CLI) — Is an industry-standard configuration interface, consistent and common throughout Foundry’s entire product portfolio.

• Web interface — Provides easy to use Graphical User Interface (GUI) for system configuration from standard Web browsers.

• sFlow (RFC 3176) — Provides scalable, ASIC-based, wire-speed network monitoring and accounting with no impact on network performance. This allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes.

IronShield™ Security • Wire-speed extended Layer 2 , Layer 3 & 4 Access Control Lists (ACL) — Control

packet forwarding and restrict access to the system management interface, while providing wire-speed switching and routing:

o Feature-rich ACL Implementation for Layer 3&4 — Identifies traffic based on source or destination IP address, IP protocol type, TCP or UDP port, IP precedence or ToS values. Supported for both all Layer 2 and Layer 3 applications.

o Feature-rich ACL Implementation for Layer 2 1 — Identifies traffic based on source or destination MAC address, Ethernet type, VLAN-ID values and 802.1p values. Supported for both all Layer 2 and Layer 3 applications.

o Selective ACL Logging — Collect statistics for packets matching specified deny or permit rules.

o ACL scalability — Support for up to 40,000 ACLs.

o Ease of administration — Identify an ACL by name or number, or add a comment line for ease of administration.

o ACL syntax compatibility — Uniform ACL syntax across all Foundry products also provides compatibility with syntax of other major vendors.

• Secure Shell and Secure Copy — Provide secure access to the administration and management interface over the network.

• Protection against Denial of Service (DoS) attacks — Prevents or minimizes network downtime and protects against malicious users by limiting TCP SYN and ICMP traffic and protects against broadcast storms by limiting broadcast traffic.

• User authentication — Authentication with AAA, 802.1x, RADIUS, TACACS, and TACACS+ prevents unauthorized network access.

• MAC Port Security – Controls the number of MAC addresses allowed per interface.

• sFlow (RFC 3176) — Provides cost-effective, scalable, wire-speed network monitoring to detect unusual network activity.

• SNMPv3 — Secured SNMP management with RFC 2570 through 2575, provides User-Based Security model (RFC 2574) for authentication and privacy services.

• BGP-Guard – complements MD5 security for BGP sessions to protect against session disruption by restricting the number of hops the BGP session can traverse.

DATASHEET



FOU

ND

RY

NET

WO

RK

S D

ATA

SH

EET

Internet Internet

80GbE

Internet Internet

80GbE

Advanced 10GbE Routing for Service Providers

The NetIron 40G offers an array of robust and proven routing protocol implementations designed to scale with the needs of today’s service providers. Multi-Service Operators (MSOs), Internet Service Providers (ISPs) and Metro Service Providers (MSPs) building IP-based backbones require super-fast route learning and scalability to keep up with the ongoing demand for high-speed broadband services to the home, such as high-definition video on-demand. Feature-rich BGP4 implementation that scales to hundreds of peers and millions of routes, along with OSPF and IS-IS are essential for large-scale service provider deployments. The NetIron 40G leverages its distributed routing architecture to provide a highly scalable and robust 10GbE routing platform. With the capacity to accommodate twice the size of the current Internet routing table in hardware (at each of its packet processing engines), the NetIron 40G offers ample room for future growth without any sacrifice in performance. The Foundry Direct Routing architecture offers increased platform stability and faster recommencement of traffic forwarding at wire speed in case of failure.

Also, with its super-fast packet and route processors, the NetIron 40G delivers 480Mpps of throughput, while maintaining 1 million IP routes in its forwarding table. This level of performance illustrates the architectural strengths that are a hallmark in all of Foundry’s products.

As a next generation 10 GbE router, the NetIron 40G offers service providers enhanced control and flexibility with respect to service provisioning. Advanced Bandwidth Management (ABM) offers highly granular control over the bandwidth offered to end subscribers using many traffic classification options. Hitless Management Failover* (HMF) enhances the overall service availability, and allows carriers to more easily meet stringent SLA requirements.

The NetIron 40G is the industry’s highest-density 10GbE router. Unprecedented 10 Gigabit Ethernet port density of up to 32 10GbE ports in a single system and up to 96 10GbE ports within a standard 7-foot telco rack allow service providers to maximize the utilization of expensive floor space by consolidating systems into fewer units. With Foundry’s standards-based 10 Gigabit Ethernet modules, service providers can immediately scale the backbone and offer 10 Gigabit uplinks for Gigabit aggregation switches and routers at the edge, while keeping operational expenditures (OpEx) under control. The 4-port 10GbE interface modules come with hot-swappable XENPAK optics, offering both maximum flexibility and serviceability. The 1550nm ER optic allows high-performance connectivity between Internet data centers in different parts of a city up to 40 kilometers apart. 10 Gigabit Ethernet port density, superior serviceability, high availability, security and advanced Layer 2/3 feature sets, along with Foundry’s sFlow (based on * Layer-3 HMF will be included in a future release.

DATASHEET



FOU

ND

RY

NET

WO

RK

S D

ATA

SH

EET

RFC 3176) to provide wire-speed traffic accounting for accurate end-user billing, make the NetIron 40G the product of choice for advanced 10GbE metro routing and service provider applications.

Scalable Layer 2 Metro Solutions Foundry’s NetIron 40G complements the existing NetIron product family for Layer 2 metro solutions, allowing service providers to build simple, cost-effective and very scalable Layer 2 networks. Metro service providers are being challenged with delivery of high-speed services at various levels. Metro service providers are increasingly turning to 10GbE as a transport technology of choice for building metro backbones. By taking advantage of the qualities of optical Ethernet such as its low cost, near-ubiquitous coverage and large pool of trained professionals, Metro service providers are building Layer 2 Metros for delivering Transparent LAN Services (TLS) for point-to-point and multipoint-to-multipoint connectivity. Foundry’s Terathon IronWare operating system powers NetIron 40G routers to provide a range of Layer 2 features specifically aimed at Layer 2 Metro networks. IronWare includes Metro Ring Protocol (MRP) for sub-second fail over and recovery in ring topologies, VSRP for sub-second fail over in mesh topologies, SuperSpanTM, Rapid STP based on 802.1w, Topology Groups, and Super VLAN aggregation for STP and VLAN scalability. Large MAC tables and ultra-low latency of under 10us offer unprecedented Layer 2 Metro Ethernet network scalability and wire-speed performance. High-speed technology, such as 10 GbE requires innovative approaches for proper monitoring and accounting of network usage. Foundry offers sFlow (based on RFC 3176), to accurately monitor the network activity at 10Gbps speeds, giving the MSP the ability to know how and who is using the network. This built-in intelligence lets the service provider accurately bill for used services, while pacing their investment in harmony with subscriber growth.

Access Ring 1

Access Ring 2

Metro Backbone Ring

1010--GbEGbE10/100/1000 Mbps (10/100/1000 Mbps (GoCGoC))

10-GbE 10-GbE10-GbE

10-GbE

1-GbE Services

1-GbE Services

1-GbE Services

NetIronNetIron 40G40G


FES X424

FES X448

FES X448 FES X424

FES X448

FES X424

Access Ring 1

Access Ring 2

Metro Backbone Ring

1010--GbEGbE10/100/1000 Mbps (10/100/1000 Mbps (GoCGoC))

10-GbE 10-GbE10-GbE

10-GbE

1-GbE Services

1-GbE Services

1-GbE Services



FES X424

FES X448

FES X448 FES X424

FES X448

FES X424

DATASHEET



FOU

ND

RY

NET

WO

RK

S D

ATA

SH

EET

10GbE Peering Services for Internet Exchange Points The NetIron 40G allows cost-effective 10GbE bandwidth for Internet Exchange Points (IXPs), promoting large-scale, non-blocking Gigabit Ethernet and direct 10GbE peering arrangements between major Internet Service Providers. The increase in high-speed broadband services to both businesses and residential markets has increased the level of traffic handled by both first and second tier Internet service providers. IXPs are effective because they allow seamless peering between ISPs. The NetIron 40G offers wire-speed, non-blocking, low latency connections with unprecedented 10 Gigabit Ethernet port density of up to 32 10GbE ports in a single system and up to 96 10GbE ports within a standard 7-foot telco rack to create an extensive switching fabric for Internet traffic. The IronWare operating system provides important features, such as Rapid Spanning Tree (802.1w), MRP, VSRP, and Layer 2 control protection, using SuperSpan to build a resilient IXP network. Additional features such as wire-speed access control lists (ACLs) and intelligent MAC address security at the interface level, ensure that the IXP can prevent unauthorized use and minimize network outages created by improper use. Cross-module trunking using 802.3ad link aggregation scales the bandwidth between any two NetIron 40Gs up to 80Gbps with added protection against link or module failures, allowing seamless expansion of the IXP. Advanced network management using out-of-band network connections and distributed processing gives the IXP full control of the network regardless of user traffic activity. Foundry’s implementation of sFlow in hardware makes accurate monitoring of the network activity at 10Gbps speeds possible. The Terathon ASIC technology, combined with the industry-proven IronWare OS, makes the NetIron 40G an effective platform for meeting the demanding needs of Internet exchanges.

GigabitPeering Router

10GbEPeering Router

10GbEPeering Router

ISPISPISPISP

ISPISP




ISPISP

ISPISP

ISPISP

ISPISP

DATASHEET



FOU

ND

RY

NET

WO

RK

S D

ATA

SH

EET

Technical Specifications IEEE Compliance

• 802.3ae 10 Gigabit Ethernet • 802.3x Flow Control • 802.3ad Link Aggregation • 802.1Q VLAN Tagging • 802.1D Bridging • 802.1w Rapid STP • 802.1X User authentication • 802.3 Ethernet Like MIB • Repeater MIB • Ethernet Interface MIB • SNMP v1, v2c and V3 • SNMP MIB II

RFC Compliance BGPv4

• RFC 1771 BGPv4 • RFC 1745 OSPF interactions • RFC 1997 Communities & Attributes • RFC 2439 route flap dampening • RFC 2796 route reflection • RFC 1965 BGP4 confederations • RFC 2842 Capability Advertisement • RFC 2918 Route Refresh Capability • RFC 1269 Managed Objects for BGP • RFC 2385 BGP Session Protection via TCP MD5

OSPF • RFC 2178 OSPF • RFC 1583 OSPF v2 • RFC 1587 OSPF NSSA • RFC 1745 OSPF Interactions • RFC 1765 OSPF Database Overflow • RFC 1850 OSPF Traps • RFC 2154 OSPF w/Digital Signatures (Password,

MD-5) • RFC 2328 OSPF v2 • RFC 1850 OSPF v2 MIB • RFC 2370 OSPF Opaque LSA Option

IS-IS • RFC 1195 Routing in TCP/IP and Dual

Environments • RFC 1377 PPP • RFC 2763 Dynamic Host Name Exchange • RFC 2966 Domain-wide Prefix Distribution

RIP

• RFC 1058 RIP v1 • RFC 1723 RIP v2

• RFC 1812 RIP Requirements IP Multicast

• RFC 1122 Host Extensions • RFC 1122 DVMRP Host Requirements • RFC 1256 ICMP Router Discovery Protocol • RFC 1112 IGMP • RFC 2236 IGMP v2 • RFC 2362 PIM-SM • PIM-DM v1 • DVMRP v3-07 • RFC 2336 IGMP v2 • MSDP • RFC 2283 MBGP

General Protocols

• RFC 791 IP • RFC 792 ICMP • RFC 793 TCP • RFC 783 TFTP • RFC 826 ARP • RFC 768 UDP • RFC 894 IP over Ethernet • RFC 903 RARP • RFC 906 TFTP Bootstrap • RFC 1027 Proxy ARP • RFC 951 BootP • RFC 1122 Host Requirements • RFC 1256 IRDP • RFC 1519 CIDR • RFC 1542 BootP Extensions • RFC 1812 General Routing • RFC 1541 and 1542 DHCP • RFC 2131 BootP/DHCP Helper • RFC 2338 VRRP • RFC 854 TELNET • RFC 1591 DNS (client) • RFC 1354 IP Forwarding MIB • RFC 1757 RMON Groups 1,2,3,9 • RFC 2068 HTTP • RFC 2030 SNTP • RFC 2138 RADIUS • RFC 3176 sFlow

Network Management

• IronView Network Manager (INM) Web-based graphical user interface

• Integrated Standard-based Command Line Interface (CLI)

• sFlow (RFC 3176) • Telnet • SNMP

DATASHEET



FOU

ND

RY

NET

WO

RK

S D

ATA

SH

EET

• RMON HP OpenView for Sun Solaris, HP-UX, IBM's AIX, and Windows NT

Element Security Options

• AAA • RADIUS • Secure Shell (SSH v1.5) • Secure Copy (SCP) • TACACS/TACACS+ • Username/Password (Challenge and Response) • Bi-level Access Mode (Standard and EXEC Level) • Protection for Denial of Service attacks, such as

TCP SYN or Smurf Attacks

Environmental • Operating Temperature: 0 °C to 40 °C

(41 °F to 104 °F) • Relative Humidity: 10 to 95%, @40 °C

(104 °F), non-condensing • Storage Temperature: -40 ºto 70 ºC

(-40 ºto 158 °F) • Storage Altitude: 15,000 ft

(3,000 m) maximum • Storage Humidity: 95%maximum relative

humidity, non-condensing • Operating Altitude: 10,000ft • EN 300 019

Safety Agency Approvals • CAN/CSA-C22.2 No. 60950-00/UL 60950 - Third

Edition, Safety of Information Technology Equipment

• EN 60825-1 Safety of Laser Products - Part 1: Equipment Classification, Requirements and User’s Guide

• EN 60825-2 Safety of Laser Products - Part 2: Safety of Optical Fibre Communication Systems

• EN 60950 Safety of Information Technology Equipment EN 60950 / IEC 950

Electromagnetic Emission Certification

• FCC Part 15 Class A • EN 55022 Class A • EN 61000-3-2 /-3 Line Harmonics & Flicker • EN 300 386 Class A • ICES Class A • VCCI Class A • CISPR-22 Class A • AS/NZS 3548 Class A

Immunity • EN 55024 Class A • EN 61000-4-2 ESD • EN 61000-4-3 Radiated Immunity • EN 61000-4-4 EFT • EN 61000-4-5 Surge • EN 61000-4-6 Low Frequency Common

Immunity • EN 61000-4-11 Voltage Dips and Sags • EN 300 386 Class A

Warranty • 1-year hardware • 90-day software

Mounting Options • 19 "Universal EIA 310(Telco) Rack or

Tabletop

DATASHEET



FOU

ND

RY

NET

WO

RK

S D

ATA

SH

EET

NetIron 40G System Specifications

@100 VAC @200 VAC @ -48VDC Power

Specifications Current (Amps)

Power (Watts)

ThermalOutput

(BTU/HR) Current(Amps)

Power (Watts)

ThermalOutput

(BTU/HR) Current (Amps)

Power (Watts)

ThermalOutput

(BTU/HR) NI40G-FAN 1.2 123 420 0.6 123 420 2.1 100 341 NI40G-MR 0.6 62 210 0.3 62 210 1.0 50 171 NI40G-SFM 1.4 135 462 0.7 135 462 2.3 110 375 NI40G-1Gx40-SFP 3.4 335 1143 1.7 335 1143 5.7 272 928 NI40G-10Gx2 2.4 236 806 1.2 236 806 4.0 192 655 NI40G-10Gx4 3.2 322 1100 1.6 322 1100 5.5 262 894 System Max 32 3185 10867 16 3185 10867 54 2586 8826

AC Input Voltage: 100 VAC to 240 VAC Power Consumption: 1150 Watts

NI40G-ACPWR Power supply module Current Draw: 14.2A @ 100 VAC; 7.1A @ 200 VAC

AC Version DC Version Physical Specifications

26.25h x 17.5w x 24d inches 22.75h x 17.5w x 24d inches Dimensions 66.68h x 44.45w x 60.96d cm 57.78h x 44.45w x 60.96d cm

Weight Fully-loaded 242 lbs (110 kg) 174 lbs ( 79 kg)

DATASHEET



FOU

ND

RY

NET

WO

RK

S D

ATA

SH

EET

Ordering Information Part Number Description NI40G-DC 8-slot NetIron 40G –48V DC Chassis with Backplane switch fabric, Dual Fan modules, Dual Fan

Controllers, and replaceable Air Filter NI40G-AC 8-slot NetIron 40G AC chassis with 3 1100w power supplies, Backplane switch fabric, Dual Fan

modules, Dual Fan Controllers, and replaceable Air Filter

NI40G-MR NetIron 40G System Management Module, 2 GB SDRAM, dual PCMCIA ports and out-of-band 10/100 Ethernet management port

NI40G-10Gx2 2-port 10GbE module with support for XENPAK optics – requires optics (10G-XNPK-SR/LR/ER) NI40G-10Gx4 4-port 10GbE module with support for XENPAK optics – requires optics (10G-XNPK-SR/LR/ER) NI40G-1Gx40-SFP 40-port Gigabit Ethernet module with MiniGBIC slots – requires optics

NI40G-1Gx40-T 40-port Gigabit Ethernet over Copper module with RJ45 connectors

NI40G-ACPWR 1100w AC power supply 10G-XNPK-SR 850nm serial pluggable XENPAK optic only (SC) over MMF 10G-XNPK-LR 1310nm serial pluggable XENPAK optic only (SC) for up to 10km over SMF 10G-XNPK-ER 1550nm serial pluggable XENPAK optic only (SC) for up to 40km over SMF

Although Foundry has attempted to provide accurate information in these materials, Foundry assumes no legal responsibility for the accuracy or completeness of the information. More specific information is available on request from Foundry. Please note that Foundry's product information does not constitute or contain any guarantee, warranty or legally binding representation, unless expressly identified as such in a duly signed writing. Foundry Networks, BigIron, NetIron, FastIron, ServerIron, IronWare, Jetscope, IronView and the “Iron” marks or trademarks are registered trademarks of Foundry Networks, Inc. in the United States of America and other countries sFlow is a registered trademark of InMon Corporation. Specifications are subject to change without notice. Foundry Networks, Inc. Headquarters 2100 Gold Street P.O. Box 649100 San Jose, CA 95164-9100 U.S. and Canada Toll-free: (888) TURBOLAN Direct telephone: +1 408.586.1700 Fax: 1-408-586-1900 Email: [email protected] Web: http://www.foundrynet.com 1 Feature under development, available in Q204

Documents

NetIron 40G Datasheet - Spectra Equipmentmet and customer satisfaction remains high. Foundry Networks’ NetIron 40G leverages its technology heritage to deliver fourth-generation