NETSCOUTSYSTEMS,Inc. LinkRunner™G2 UserGuidee...HomeScreen Tap this icon to view the User Guide. Ta This is the Noti!cation Bar. Swipe down from the top of the screen to open the

NETSCOUT SYSTEMS, Inc.

LinkRunner™ G2User Guide

October 30, 2017

Legal NotificationUse of this product is subject to the End User LicenseAgreement available at http://enterprise.netscout.com/EULAor which accompanies the product at the time of shipment or,if applicable, the legal agreement executed by and betweenNETSCOUT SYSTEMS, INC., and the purchaser of this product("Agreement").Government Use and Notice of Restricted Rights: In U.S.government ("Government") contracts or subcontracts,Customer will provide that the Products and Documentation,including any technical data (collectively "Materials"), sold ordelivered pursuant to this Agreement for Government use arecommercial as defined in Federal Acquisition Regulation("FAR") 2.101 and any supplement and further are providedwith RESTRICTED RIGHTS. All Materials were fully developedat private expense. Use, duplication, release, modification,transfer, or disclosure ("Use") of the Materials is restricted bythe terms of this Agreement and further restricted inaccordance with FAR 52.227-14 for civilian Government agencypurposes and 252.227-7015 of the Defense Federal AcquisitionRegulations Supplement ("DFARS") for military Governmentagency purposes, or the similar acquisition regulations ofother applicable Government organizations, as applicable andamended. The Use of Materials is restricted by the terms ofthis Agreement, and, in accordance with DFARS Section227.7202 and FAR Section 12.212, is further restricted inaccordance with the terms of NETSCOUT's commercial EndUser License Agreement. All other Use is prohibited, except asdescribed herein.This Product may contain third-party technology. NETSCOUTmay license such third-party technology and documentation

2

("Third-Party Materials") for use with the Product only. In theevent the Product contains Third-Party Materials, or in theevent you have the option to use the Product in conjunctionwith Third-Party Materials (as identified by NETSCOUT in theapplicable Documentation), then such third-party materialsare provided or accessible subject to the applicable third-partyterms and conditions contained in the "ReadMe" or "About"file located on the Application CD for this Product. To theextent the Product includes Third-Party Materials licensed toNETSCOUT by third parties, those third parties are third-partybeneficiaries of, andmay enforce, the applicable provisions ofsuch third-party terms and conditions.Open-Source Software Acknowledgment: This product mayincorporate open-source components that are governed by theGNU General Public License ("GPL") or licenses that arecompatible with the GPL license ("GPL Compatible License"). Inaccordance with the terms of the GNU GPL, NETSCOUT willmake available a complete, machine-readable copy of thesource code components of this product covered by the GPL orapplicable GPL Compatible License, if any, upon receipt of awritten request. Please identify the product and send arequest to:NETSCOUT SYSTEMS, Inc.GNU GPL Source Code Request310 Littleton RoadWestford, MA 01886Attn: Legal DepartmentNETSCOUT SYSTEMS, INC. reserves the right, at its solediscretion, to make changes at any time in its technicalinformation, specifications, service, and support programs.

3

Contents

Contact Us 7

Introduction 8About thisGuide 9Most Commonly Used Features 11Safety 12

Physical Features 14Buttons and Ports 15Power and Charging 18Maintenance 20

Home Screen and Android Interface 21Home Screen 22Swiping and Navigation 26Top Notification Panel 27Quick Settings Panel 29Device Settings 30Sharing 31

LinkRunner G2 Application Settings 33

4

Left-SideNavigation Drawer 34Configuring Test Settings 35Profiles and Jobs 41

LinkRunner G2 Tests and Results 44AutoTest 45Floating Action Button 59Switch Test 60Cable Test 62

Link-Live Cloud Service 67Getting Started in Link-Live 68

Software Management 70Managing Files 71Updating Firmware 75Restoring Factory Defaults 77Changing the Language 78

Additional Features 79Reflector 80Camera and Flashlight 83

5

Wi-Fi Bluetooth USB Adapter 84

Specifications and Compliance 87Specifications and Compliance 88

6

Contact UsOnline: http://enterprise.netscout.com

Email: [email protected]

Phone: 1-844-833-3713

For more phone numbers, go to our websiteenterprise.netscout.com/contact.

NETSCOUT SYSTEMS, Inc.310 Littleton RoadWestford,MA 01886

www.NETSCOUT.com

Register your LinkRunner G2Registering your product with NETSCOUT givesyou access to valuable information on productupdates, troubleshooting procedures, and otherservices.

To register, fill out the online form on theNETSCOUTwebsite athttp://enterprise.netscout.com/register.

7

IntroductionThe LinkRunner G2 isan Android-basednetwork testing andtroubleshooting tool. Itallows networkingprofessionals to easilyverify networkconnectivity andvalidate cabling.LinkRunner G2 can alsoact as a packet reflectorfor performance testsrun by other NETSCOUTtesters.

8

LinkRunner G2User Guide

About this GuideThisUser Guide covers all the LinkRunner G2(LR G2) testing functionality and basic elements ofthe Android interface. This guide ismeant forusers knowledgeable about networking testingoperations.

For additional help with your LR G2, visitLink-Live.com, and create an account. In Link-Live,select the navigation menu icon at the top leftof the page to open the navigation drawer, andclick .

If you already have a Link-Live Cloud Serviceaccount, you can go directly toLink-Live.com/Questions for Knowledge Basearticles and Frequently Asked Questions.

PDF Reader ApplicationA PDF reader application is pre-installed on yourLinkRunner G2device for the purpose of viewingthis guide.With it, you can navigate through thepages, touch headings in the Contents list andblue links to skip to specific sections or open

9

Introduction

external websites, and use the search feature tofind specific terms.

10

Introduction

Most Commonly UsedFeaturesTouch the links below to skip to the instructionsfor the features listed:

"AutoTest" on page 45

"Cable Test" on page 62

"Switch Test" on page 60

"Configuring Test Settings" on page 35

"Home Screen" on page 22

"Reflector" on page 80

"Wi-Fi Bluetooth USB Adapter" on page 84

11

Introduction

SafetyObserve the following safety information:

Use only the AC Adapter provided or Power overEthernet to charge the battery.

Use the proper terminals and cable for allconnections.

To avoid possible electric shock or personal injury,follow these guidelines:

l Do not use the product if it is damaged.Before using the product, inspect the case,and look for cracked or missing plastic.

l Do not operate the product around explos-ive gas, vapor, or dust,

l There are no serviceable parts. Do not try toservice the product.

l If this product is used in amanner not spe-cified by themanufacturer, the protectionprovided by the productmay be impaired.

12

Introduction

Safety Symbols

WWarning or Caution: Risk ofdamage to or destruction ofequipment or software.

X Warning: Risk of electrical shock.

� Certified by UL North AmericaSafety Standards.

j Not for connection to a publictelephone system.

* Class 1 Laser Product. Do notlook into the laser.

13

Introduction

Physical FeaturesThis User Guide sectionillustrates the ports and buttonson the LinkRunner G2 anddescribes charging andmaintenance.

14


Buttons and PortsButton and port functions are described below.

Touchscreen

USB Port100/1000 BASE-X Fiber Port

RJ-45 LAN Port and Trasmit LEDs

RJ-45 Cable Test/ Wire Mapping (WMAP) Port

Micro-USB On-the-go

Port

Micro-SD Card Slot

Charging Port

Kensington Lock

Camera and

Flash

VolumeButtons

Microphone

Speaker

Power Button and LED

Figure 1: LinkRunner G2 Physical Features

15

Physical Features

Feature Description100/1000 BASE-XFiber Port

Connects to an SFP adapter andfiber cable

USB Port Connects to anyUSB device

RJ-45 LAN Port(10/100/1000BASE-T)

Connects to the network usingan Ethernet cableCharges the unit if PoE isavailable

Transmit LEDs Green LED lit: LinkedYellow LED flashing: Activity

Cable Test/WireMapping Input(WMAP)

Used for patch cable testing

Power Buttonand LED

Glows greenwhen the unit ispowered onGlows redwhen the unit ischarging

Charging Port Connects to AC adapter forcharging

Microphone Allows voice input

Camera andFlash

Captures images and acts as aflashlight

Micro SD CardSlot

Used for removable storageexpansion

16

Physical Features

Feature Description

Micro USB On-the-Go Port

Connects to a USB On-the-Gocord for communicating with aPCor USB peripheral

KensingtonLock Allows you to lock your unit

Volume Buttons Increase or decrease the audiovolume

Speaker Produces audio

17

Physical Features

Power and ChargingThe LinkRunner G2 contains a rechargeableLithium Ion battery. You can charge your LR G2using either AC or Power over Ethernet (PoE). TheLinkRunner G2doesnot charge via theUSB port.

See Buttons and Ports.

ChargingTo chargewith AC power, plug the included ACadapter into an AC outlet, and connect it to thecharging port on the device.

To chargewith PoE, connect the RJ-45 port on thedevice to a network switch with PoE available orwith a PoE injector.

NOTE: The LR G2must be powered on or in sleepmode to charge via PoE.

Charge the battery for 4-6 hours before first use.

Powering Onl Press the power button on the front of the

unit to power on the LinkRunner G2.

l When the unit is on, press the power buttonto put it in sleep mode.

18

Physical Features

l To shut down, hold the power button forone second until the Power offdialog boxappears on the touchscreen, then tapPower off .

l To perform a hard power off (without shut-ting down the software), press and hold thepower button for five seconds.

The first time you turn it on, the LinkRunner G2testing application opens and begins testing yournetwork immediately. Connect the top RJ-45 LANport or 100/1000 BASE-X Fiber port to an activenetwork to begin receiving test results.

19

Physical Features

MaintenanceTo clean the display, use a lens cleaner and a soft,link-free cloth.

To clean the case, use a soft cloth that ismoist withwater or a weak soap.

WCAUTION: Do not use solvents or abrasivematerials thatmay damage the product.

20

Physical Features

Home Screen andAndroid InterfaceThis section explains how to use thefeatures of the Android home screen anduser interface to navigate and organizeyour device.

The LinkRunner G2 interface appliesmany of the operations typical of anyAndroid device. Use swiping touchscreenmotions to navigate through screens andto drag down the top notification panel.

21


Home Screen

Tap this icon to view the User Guide.

Ta

This is the Notification Bar. Swipe down from the top of the screen to open the Top Notification Panel.

These are the default Home Screen apps. Touch to open.

NETSCOUT App Store

Device Settings

APPS Screen

Web Browser

File Manager

This is the Home Screen. Swipe left and right to move through pages.

Go to the APPS Screen to add app shortcuts to your Home Screen.

Returns to the previous screen.

Tap to view and close all open applications.

Returns to the Home Screen.

Opens the LinkRunner G2 testing application.

Figure 2: Home Screen

22

Home Screen and Android Interface

Notification BarTheNotification Bar across the top of the screendisplays notification icons from the Androidsystem aswell as the following LinkRunner G2specific icons:

indicates access to Power over Ethernet forpower and charging.

indicates that a wired Ethernet connection is

established.

Touch and swipe down on theNotification Bar toopen the Top Notification Panel.

APPS ScreenTouch the APPS button on theHome Screen

to open the APPS screen.

23


Figure 3: APPS Screen

Swipe left or touchWIDGETS to view theWIDGETSscreen.

Touch and hold (long press) an application's iconor awidget to add it to theHome Screen.

Open theNETSCOUT App Store to downloadAndroid applications specifically chosen to workwith the LinkRunner G2 tester.

24


Figure 4: App Store

25


Swiping and NavigationThe navigation actions you can perform to movethrough screens and panels in LinkRunner G2 arethe same as those you would use to navigate anAndroid phone or tablet.

SwipingTouch and drag your finger or "swipe" up, down,left, and right to move through pagesof theHome Screen and LinkRunner G2 testingapplication, scroll up or down in long screens, andpull out navigation drawers and panels.

Long PressingTouch and hold or "long press" files or applicationicons to reveal additional operations. Forexample, you can long press a file name in the FileManager Application to showoptions for movingor sharing the file.

26


Top Notification PanelThe Top Notification Panel contains notificationsfrom your device, such asdownloaded andinstalled applications, inserted hardware,captured, screenshots, and available updates.

Swipe (touch and drag) down from the very topof LinkRunner G2 screen to slide down thenotification panel.

Figure 5: Top Notification Panel

l Touch a notification to open the related app,image, device options, or perform other

27


actions.

l Swipe left on a notification to dismiss it.

l Touch the icon at the lower right of thepanel to dismiss all notifications.

28


Quick Settings PanelTheQuick Settings Panel is also accessed byswiping down from the top of the screen. You caneither swipe down twice, or touch the dark greytop portion of the navigation panel to open it.

Figure 6: Quick Settings Panel

Touch an icon in the panel to enable or disable thecorresponding feature. SeeWi-Fi Bluetooth USBAdapter for more information on using theoptionalWi-Fi and Bluetooth adapter accessory.

29


Device SettingsTo access the Android device settings, touch theSettings icon on theHome Screen.

Figure 7: Android Device Settings

Use the device Settings screen to adjust theLinkRunner G2display, sound, date/time, andlanguage, view installed applications and memorydevices, update your software, or reset to factorydefaults.

30


SharingLinkRunner G2 allows you to "share" images andfiles like you would on a cellular phone.When yousee the Share icon touch it to view yourconfigured sharing options.

Thisexampleshowsacapturedscreenshotnotification.

TouchingSHARE opens the Sharewith pop-up dialog,where you can chose a sharingmethod.

NOTE: Touch theLinkRunner G2option to share toLink-Live CloudService or to save toyour images gallery on the LinkRunner G2.

31


Capturing a ScreenshotOn the LinkRunner G2, press and hold the Powerbutton and the VolumeDown button at the sametime for one second to capture a screenshot. TheLinkRunner G2 emits a beep and displays thecaptured screenshot notification when it issuccessful.

32


LinkRunner G2Application Settings

This chapterdescribes theprocesses forconfiguring testsettings andsaving them to aprofile.

33


Left-Side Navigation DrawerTo access the LinkRunner G2 testing applicationsettings, touch the navigation menu icon at thetop left of the LinkRunner G2 application screen.

Once claimed to Link-Live, the unit’s name and organization shown here.

Tap here to open the Profiles screen.

Tap here to open the Settings screen.

Tap here to enter a new Job comment.

Tap here to use the Reflector feature.

Tap here to view information about your unit.

Figure 8: Left-Side Navigation Drawer Options

34

LinkRunner G2 Application Settings

Configuring Test SettingsThe LinkRunner G2 settings allow you tocustomize test settings for PoE, Speed/Duplex,Security, IP configuration, test targets, and otheraspects of AutoTest, Switch Test, and Cable Test.

To configure testing for your network, touch thenavigation menu icon at the top left of theLinkRunner G2 application screen, and then touchthe option.

Saving and Loading Profile SettingsThe header on the Settings screen displays thename of the current Profile.

To save your settings to a Profile (and view otheroptions), tap the save icon at the top right ofthe Settings screen.

35


To keep your revised settingswithout saving themto a profile, touch the back arrow icon to the left ofthe Settings screen header. Your new settings areapplied, and an asterisk * is added to the profilename to indicate unsaved changes.

See Profiles and Jobs for more on profiles.

PoE

Enable PoE: Slide the toggle switch right to enablethe PoE test portion of AutoTest, and slide left todisable it.

Enable TruePower™: Slide the toggle switch rightto enable the TruePower feature. TruePowervalidates that the Switch (PSE) and cabling canprovide the requested power under load.

Class: Touch the down caret to the right of thefield to select a PoE class setting to match yourswitch's (or PoE injector's) available class. TheLinkRunner G2 supports Cisco'sUPOE, which canprovide up to 51W. (Note that your switch mayadvertise awattage higher than 51W, but becauseof loss over the cable, the LR G2doesnot receivethe total wattage provided by the switch.)

36


Connect

Speed/Duplex: Select the speed and duplexoption that you want to test your network against.The default is Auto negotiation.

Security

802.1X Authentication: Slide the toggle switchright to enable 802.1X authentication.

EAP Type: This field appears if 802.1Xauthentication is enabled. Touch the down arrowto choose the correct type. Additional securityfields, such asUsername and Password, display asrequired.

IP

IPv6: Slide the toggle switch right to enable IPv6.

IP Configuration: Touch the down caret toswitch between DHCP and Static IP configuration.If you choose static, the IP Address, SubnetMask,and other IP fields display. Touch each field toopen a pop-up number pad and enter theaddresses asneeded. Touch OK to save them.

Proxy: Slide the toggle switch right to enableProxy settings.When proxy is enabled, the

37


Address, Port, Username, and Password fieldsappear. Touch each field to open a pop-upkeyboard and enter the appropriate data. TouchOK to save your entries.

Targets

You can add an unlimited number of test targetsby entering the IP address or a URL and specifyingeither an ICMP Ping or TCP Port Open test foreach target.

Address: When AutoTest runs, the LinkRunnerG2 attempts to reach the target address entered inthis field. The default isGoogle.com.

l Touch the Address field to open a pop-upkeyboard and enter a new address.

l Touch the action overflow icon to the rightof the Address field to either Delete the tar-get address field from AutoTest or Duplic-ate the current target address entry.

Port: This is the port the LinkRunner G2uses toconnect to the target address for a TCP Port Opentest. The default is 80. Touch the Port field to opena pop-up number pad and enter a newportnumber. Touch OK to save it.

38


Ping: Slide the toggle switch right to run an ICMPPing test to the target address test. The Port fielddisappearswhen this toggle is enabled.

+ ADD TARGET: Touch to add additional targetaddress fields.

VLAN

Enable VLAN: Slide the toggle to the right toenable VLAN settings.Once enabled, VLAN ID andVLAN Priority fields appear. Touch these fields toopen a pop-up number pad and enter the correctID and priority. Touch OK to save them.

User Defined MAC

Enable User Defined MAC: Slide the toggle to theright to enable a user-defined MAC address.Whenenabled, the User Defined MAC field turns fromgrey to black.

User Defined MAC: If enabled, touch this field toopen a pop-up keyboard and enter your MACaddress. Touch OK to save it.

General SettingsCable Unit: Touch the down caret to selecteither meters or feet for the Cable Test unit of

39


measurement.

Default Settings: Tap this field to restore theLinkRunner G2 testing application to factorydefault profile settings. A dialog box will ask you toconfirm Yesor No before it restores.

NOTE: See Restoring Factory Defaults forinstructions on resetting your entire LR G2deviceto factory default configuration.

40


Profiles and JobsA Profile is a saved configuration of test settings.The currently active Profile's name is displayed inthe Left-SideNavigation Drawer and at the top ofthe Settings screen, as shown below.

The header on the Settings screen displays thename of the current Profile.

An asterisk * next to the Profile name indicatesthat you have adjusted settings since the Profilewas last saved.

To save your settings to a Profile (and view otheroptions), tap the save icon at the top right ofthe Settings screen.

Profile saving options include the following:

l Save saves the current settings to the cur-rently loaded profile.

41


l Save As saves a newProfile with the currentsettings and opens a pop-up keyboard forentering a newname. Touch SAVE to savethe newProfile Name.

l Load opens the Profiles screen.

Profiles ScreenThis screen displays a list of all the saved Profiles.

NOTE: The "Link-Live" profile is a profile createdfrom Link-Live Cloud Service and downloaded toLinkRunner G2. A single profile can be created inLink-Live and pushed to many LinkRunner G2s.

Touch a Profile's name to load its saved settings.

Touch the overflow action icon next to a Profilename to Delete, Rename, or Duplicate it.

If you choose to duplicate a Profile, a pop-updialog prompts you for a NewProfile Name.Touch SAVE to save the newname.

42


JobsJobs are comments that are added to the testresults uploaded to Link-Live Cloud Service. Theyhelp you organize test results.

To save a Job comment, touch the navigationmenu icon at the top left of the LinkRunner G2application screen, and then touch the Job field toopen a dialog box and the pop-up keyboard.Touch OK to save the new Job comment.

If the Job saved on your LinkRunner G2unitmatches a named folder in your Link-Liveorganization, the testresults are automaticallysorted into that folder.

If you want to create anew folder in Link-Liveand save your testresults to it, simply add a forward slash / at thebeginning of the Job name, as shown in the imageon this page.

43


LinkRunner G2 Testsand ResultsThe LinkRunnerG2 features amain AutoTestscreen, a SwitchTest screen, and aCable Test screen.Swipe left andright to movethrough the threetest screens.

This User Guidechapter describeseach test sectionand its results.

44


AutoTestTo run AutoTest, connect the RJ-45 port or theFiber port on the top of the LinkRunner G2 to anactive network switch. Touch theNETSCOUT logoicon at the bottom of the screen to open theLinkRunner G2 testing application.

Each individual test is presented on its own card.Tap the down caret on the right side of a cardto expand and view detailed results.

The AutoTest tabheader shows thenumber of failedtests (if any) in redand the numberof warnings inyellow. In theimage on thispage, the PoE,DHCP, and Link-Live upload testshave failed. Thetest icons also turn green, yellow, or red based onthe test results.

45

LinkRunner G2 Tests and Results

To restart testing at any time, tap the refresh iconat the top right of the LR G2 app screen.

Test Settings are described in the LinkRunner G2Application Settings chapter.

The following subsectionsdescribe each card inthe AutoTest.

46


Power over Ethernet (PoE) TestThe header of the PoE Test card displays themeasured Voltage, Class, and Wattage.

Figure 9: PoE Test Card Expanded

The PoE card displays additional TruePower™results only if TruePower is enabled in thePoE Settings. TruePower applies a load equivalentto the selected class to mimic a Powered Device(PD).

47


Detailed PoE Results

PoE Result Description

Requested Class Class selected in the PoE testsettings

Received ClassClass acknowledgmentreceived by the LRG2 from theswitch

TruePower™Power Measuredwattage with load

Unloaded Voltage Measured voltage withoutload

TruePower™Voltage Measured voltage with load

PSE TypeSwitch's advertised PowerSourcing Equipment (PSE)type; If type cannot bedetermined, displays 1/2.

Positive Positive PoE cable pair IDs

Negative Negative PoE cable pair IDs

48


Link TestThe Link Test card header displays the advertisedspeed and duplex in grey and the detected speedand duplex in black text.

Figure 10: Link Test Card Expanded

Detailed Link Results

Link Result Description

Advertised Speed Speed capability as reportedby the switch

Actual Speed Link speed asmeasured byLinkRunner G2

AdvertisedDuplex

Duplex capabilities reportedby the switch

49


Link Result Description

Actual Duplex Duplex in use as detected byLRG2

Rx Pair Link receive pair

Polarity Link polarity: normal orreversed

Interface Link interface: Copper/RJ-45port or SFP/Fiber port

50


Switch TestThe Switch Test card header displays thediscovered switch name or simply Ethernet if noswitch name could be discovered.

Figure 11: Switch Test Card Expanded

If LinkRunner G2wasunable to obtain switchinformation from the first AutoTest run, touchREFRESH to capture and display the next portadvertisement/xDP (LLDP or CDP).

Detailed Switch Results

Switch Result DescriptionPort Discovered port name

VLAN Discovered VLAN ID number

51


Switch Result Description

Voice VLAN Discovered Voice VLAN IDnumber

Name Discovered switch's name

Model Discovered switch's model

Address Discovered switch's IP address

Type Switch type: CDP or LLDP

52


DHCP TestTheDHCP Test card header displays theDHCPserver's IP address.

Figure 12: DHCP Test Card Expanded

Detailed DHCP Results

DHCP Result Description

Discover Status of the discovery framebroadcast from LRG2

Offer timeTime betweenwhen LRG2sent the discovery andreceived an address offerfrom the DHCP server

53


DHCP Result Description

Request Status of the address requestsent from LRG2

ACK TimeTime between LRG2 sendingthe request and receiving theacknowledgement from theDHCP Server

Server IP address of the DHCP server

Subnet IP address of the subnetwhere LRG2 is testing

Lease TimeTime the IP address is leasedto the LRG2 by the DHCPserver

54


DNS TestTheDNS test card header displays theDNS IPaddresses.

Figure 13: DNS Test Card Expanded

Expand theDNS card to view the response timesfrom each DNS server. The LR G2pings each DNSserver three times and displays the response timefrom each Ping.Up to four DNS servers arecaptured and displayed on theDNS test card.

55


Gateway TestTheGateway Test card displays the gateway's IPaddress.

Figure 14: Gateway Test Card Expanded

The LR G2pings the gateway three times anddisplays the response time from each Ping.

56


Target TestsThe Targets Tests are user-assignable endpointsthat LR G2 attempts to connect to each timeAutoTest runs. Target tests are either Ping or TCPPort Open tests.

See Targets in the Configuring Test Settingschapter.

The Target Test card header shows theURL or IPaddress of the target and the port number ifapplicable.

Figure 15: Target Test Cards

57


The expanded Target Test card shows the IPaddress of the target, the type of test (Ping orTCP), and the time for each response received byLR G2.

Touch CONTINUOUS to run a continuousmonitoring test to the target. A dialog box appearsand displays the continuousPing or TCP PortOpen test results until you close the dialog box.

Link-Live UploadThe Link-Live Test card indicateswhether theLinkRunner G2was able to upload your testresults to the Link-Live Cloud Service. Refer to thechapter on Link-Live Cloud Service for moreinformation.

58


Floating Action ButtonThe Floating Action Button or FAB appears onmany of the Android and LinkRunner G2application screens. It offers additional actionsrelated to the current screen or test.

For example, theAutoTest FAB allowsyou to add a picture ora comment to the lastAutoTest results.

Tap or click the FABonce to view theadditional optionsavailable. Then, touchthe pop-up button for the action you want toperform.

59


Switch TestThe Switch test tab displays the information fromthe nearest switch by locating the portadvertisement (xDP) on the first few packets seenby LinkRunner G2.

Switch Nameand Model

Switch IP address

Port and slot number

Port VLAN IDs

Switch Test FABSw

Speed and Duplex: Advertised/DetectedSpAdAd

PoE Voltage and Wattage: Advertised/DetectedWa

PoE Positive and Negative cable pairs

Blue line for Copper/LANOrange line for Fiber/SFP

Figure 16: Switch Test Screen

60


Tap the FAB on the Switchtest screen to access thefollowing actions:

Refresh xDP: Captures anddisplays the next portadvertisement (CDP orLLDP).

Flash Port: Causes theswitch to flash the LED on the port where theLinkRunner G2 is connected. Touch and drag theslider between Slow and Fast to differentiate itfrom the other switch port LED flash rates.


61


Cable TestThe Cable test can help you determine cablelength and status, wiremap patch and structuredcabling, and locate cables.

The Cable test tab can perform tests using the fouroptionsdescribed in this section.


Refer to Buttons and Ports as needed.

62


Open Cable TDR TestingConnect an open cable (unterminated) into thetop RJ-45 port to measure its length and view anyshorts, opens, or splits.

Figure 17: Open/Unterminated Cable Test

63


Patch Cable TestingConnect a cable from the top LinkRunner G2RJ-45LAN port into the side RJ-45 Cable Test/WireMapping Port to view its length and wiremapping,including any faults.

Figure 18: RJ-45 LAN Port to RJ-45 Cable Test Port

64


Wire MappingConnect the top RJ-45 port to a cable terminatedwith an externalWireView Cable ID accessory. AWireView#1 is included with your LinkRunner G2.AdditionalWireViews2-6 are available forpurchase.

Figure 19: Wire Mapper Cable Test

TheWireMapper Cable Test displays the numberof theWireView attached, unless a cable faultprevents LR G2 from detecting theWireView.

A cable/drop port can be traced using aWireViewup to 300 ft/100m from the LinkRunner G2.

65


* IntelliTone is a trademark of Fluke Networks.

Using the Tone FunctionA cable can also be traced using a FlukeNetworks*IntelliTone™ Probe, or any analog probe, and theTone function.

Connect a cable into thetop RJ-45 port, touch theFAB, and select theappropriate Tone optionfor your probe. TheLinkRunner G2 emits thetone through the cable,and the probe detects it,allowing you to trace thewire or locate it in the switch closet.

66


Link-Live CloudServiceLink-LiveCloud Serviceis a free,online systemfor collecting,tracking,organizing,and reporting your test results, which areautomatically uploaded once yourLinkRunner G2 is claimed.

Claiming your LR G2 to Link-Live alsoallows you to update the firmware on yourunit and access applications in theNETSCOUT App Store that have beenspecifically chosen to work withLinkRunner G2.

67


Getting Started in Link-LiveTo start, create a user account at Link-Live.com,and sign in.

On the LinkRunner G2 UnitIn the LinkRunner G2 testing application on yourLR G2unit, touch the navigation menu icon atthe top left of the screen, and touch CLAIM NOWin the navigation drawer.

In Link-LiveThe first time you sign in to Link-Live, a pop-upwindow appears prompting you to claim a device.

If you already have a user account and otherdevices claimed to Link-Live, navigate to theUnitspage from the left side navigation drawer, and

68

Link-Live Cloud Service

click theClaim Unit button at the lowerright corner of the screen.

Then, select the LinkRunner G2 image,and follow the claiming instructions on the Link-Livewebsite.

Once your LR G2 is claimed to the Link-Live Cloud,it will automatically upload your AutoTest resultseach time you run AutoTest.

For more information on how to use Link-Live,click or touch the navigation menu icon at thetop left of the Link-Livewebsite, and select

.

69

Link-Live Cloud Service

Software ManagementThis chapterexplains how tosave andtransfer filesusing yourLinkRunner G2.

70


Managing FilesLinkRunner G2 supports severalmethods formanaging files, consistent with other Androiddevices. Images, documents, applications, andother files live in a folder hierarchy, where you cancopy,move, and paste them between folders orto external storage locations.

See also Swiping and Navigation

File Manager ApplicationThe FileManager app allows you to access the filessaved on your LR G2. Touch the icon at thebottom of theHome Screen to open the FileManager.

Touch a folder orfile in the FileManager to open it.

Long press onfolders or files inthe FileManager toview additional filemanagementoperations.

71

SoftwareManagement

Tap the action overflow icon where ever itappears in the FileManager to see even moreactions, such as to create a new folder or add a fileto theHome Screen.

Using a Micro-SD Card1. To use aMicro-SD card for storage, insert it

into theMicro-SD card slot on the right sideof your LinkRunner G2. A Micro-SD cardicon appears in the notification bar at thetop of the LR G2 screen.

2. On the LR G2 screen, pull down theTop Noti-fication Panel to reveal the "New SD carddetected" notification.

3. Touch Set Up.

4. On the Set up your SD card screen, selectUse as portable storage to use theMicro-SD card for transferring files to and fromyour LinkRunner G2.

72

SoftwareManagement

5. Touch theNEXT button at the bottom left ofthe screen.

6. Touch DONE.

7. The SD card storage location is now avail-able from the FileManager application,and a notification appears in the Top Noti-fication Panel alerting you that it is con-nected.

Using a USB DriveInsert a USB flash drive into theUSB port on thetop of the LR G2.

TheUSB storage location is now available fromthe FileManager application, and a notificationappears in the Top Notification Panel alerting youthat it is connected.

Using a Micro-USB to USB Cable1. Plug aMicro-USB connector side of a USB

cord into theMicro-USB port on the rightside of the LR G2, and plug theUSB side intoa PC or tablet. (If the LR G2 folder doesnotopen automatically on your PC screen, con-tinue following the stepsbelow.)

73

SoftwareManagement

2. On the LR G2 screen, slide down the TopNotification Panel to view the notifications.

3. Then, touch USB for File Transfer.

4. In the pop-up dialog, tap the File transfersoption.

5. On your PC or tablet, navigate to theLinkRunner G2 folder in the file system ifnecessary. From there, you can move, copy,and paste files to and from the LinkRunnerG2's file system.

74

SoftwareManagement

Updating FirmwareYour LinkRunner G2 accesses software updatesfrom the Link-Live Cloud Service.

NOTE: You must create an account and "claim"your LinkRunner G2unit to the Link-Live CloudService for the LR G2 to find and downloadsoftware updates. SeeGetting Started in Link-Live.

1. To check for updates through theDevice Set-tings, touch the Settings icon at the bot-tom of theHome Screen.

2. On the Settings screen, scroll down to theSystem section and touch About Tester.

3. At the top of the About Tester screen, touchCHECK FOR UPDATES.

4. On the System Upgrades screen, touch theCheck for Updates button. If a new soft-ware version is available, it displays belowthe Current version shown.

5. Tap the new version number and thentouch Download to download and installthe latest software.

75

SoftwareManagement

6. Once the new software is downloaded,touch Install to install it.

76

SoftwareManagement

Restoring Factory DefaultsWCAUTION: This operation will delete all testresults, installed applications, saved files, anddevice settings to the factory default state.Makesure to back up any files you desire to keep.

1. To access the Android device settings, touchthe Settings icon at the bottom of theHome Screen.

2. On the Settings screen, scroll down to thePersonal section, and touch Reset.

3. On the Reset screen, touch Factory datareset.

4. At the bottom of the Factory data resetscreen, touch RESET LINKRUNNER G2.

5. The device asks you to confirm oncemorethat you want to restore all defaults. TouchERASE EVERYTHING to do so.

The device restartswith factory default settings.

77

SoftwareManagement

Changing the Language1. To change the language on the LinkRunner

G2 interface, go to theDevice Settings bytouching the Settings icon at the bottomof theHome Screen.

2. On the Settings screen, scroll down to thePersonal section, and touch Language &input.

3. On the Language& input screen, touch Lan-guage.

4. Touch the name of your desired language inthe list. The LR G2displays the chosen lan-guage.

78

SoftwareManagement

Additional FeaturesThis chapter describes how to use thebuilt-in camera, flashlight, and reflectorfeatures and the optional Wi-Fi BluetoothAdapter.

79


ReflectorThe Reflector feature allows the LinkRunner G2 toact as a reflector for performance tests conductedby other NETSCOUT testing devices.

To open the Reflector screen, touch the navigationmenu icon at the top left of the LinkRunner G2application screen, and then touch Reflector.

>

Figure 20: Reflector Configuration

80

Additional Features

IP Address:When you enter the Reflector screen,the LR G2 automatically obtains and displays its IPaddress in the top field.Use this IP address toconnect to the LR G2 from your mainperformance testing device.

MAC Address: LinkRunner G2'sMAC address

Packet Type: Touch the down caret to selectthe packet type filter setting. TheMAC +NETSCOUT setting tells LR G2 to reflect onlypacketswith a destination MAC address thatmatches the LR G2's own MAC address andNETSCOUT payload.

Swap: Touch the down caret to select a swapsetting.MAC + IP tells the LR G2 to swap thesource and destination MAC and IP addresses forpackets that are reflected back to LR G2.

NOTE: The recommended settings are PacketType: MAC + NETSCOUT and Swap: MAC + IP.Other Reflector settingsmay cause undesiredtraffic on your network.

81

Additional Features

To start the Reflector feature, tapthe FAB on this screen, and thentap Start.

While running, the Reflectorscreen displays the bytes receivedand reflected.

See the user documentation for your mainNETSCOUT performance tester for informationon setup and viewing results.

82

Additional Features

Camera and FlashlightThe camera lens and flash are located on the backof the LinkRunner G2unit. (See Buttons andPorts.)

The Camera application is located in the APPSscreen. Touch the Appsbutton on theHomeScreen to open the APPS screen. From there, youcan touch and hold on the camera app icon, andthen place the icon on aHome Screen page forquick access.

Additionally, once an AutoTest has completed, theFloating Action Button appears and provides theoption of opening the camera application to takeand attach a picture to the AutoTest results.

The Flashlight feature can be accessed from theQuick Settings Panel by swiping down twice fromthe top of the LR G2 screen.

83

Additional Features

Wi-Fi Bluetooth USB AdapterAWi-Fi Bluetooth 4.0USB Adapter for LinkRunnerG2 is available for purchase. You can use it toconnect to networkswirelessly for browsing theinternet, transferring files, using email, andrunning applications.

Plug theUSB Adapter into theUSB port on thetop of your LinkRunner G2.

Connecting to Wi-Fi or Bluetooth1. On the LR G2 screen, swipe down from the

top of the screen twice to open theQuick Settings Panel.

2. At any time, tap the icons aboveWi-Fi orBluetooth to quickly enable or disableWi-Fior Bluetooth capability.

3. Tap to open the list of availableWi-Finetworks.

4. Touch a network's name to connect to it.

84

Additional Features

Optionally, touchMORE SETTINGS to open theWi-Fi device settings screen and manageWi-Finetworks there.

Once aWi-Fi network or Bluetooth device isselected, its name displays below theQuickSettings icon.

85

Additional Features

To connect to a Bluetooth device, touchto scan for available Bluetooth

devices.

MORE SETTINGS opens the Bluetooth devicesettings screen aswell.

On the Bluetooth or Wi-Fi settings screen, touchthe action overflow icon to Refresh thescanning process and view other options.

86

Additional Features

Specifications andComplianceRequired compliance information iscontained in this chapter.

87


Specifications and Compliance

Dimensions 3.8 in x 7.7 in x 1.6 in (9.7 cm x 19.6cm x 4.1 cm)

Weight 18 oz (0.51 kg)

Battery Rechargeable lithium-ion batterypack (3.6 V, 6 Ah, 21 Wh)

Battery LifeTypical operating life is 4 hours(infinite on PoE). Typical chargetime is 3 hours.

Display 5.0 in color LCDwith capacitivetouch screen (480 x 800 pixels)

Keypad 1-key elastomeric (power only)

HostInterface micro USB On-the-Go port

USB Port USB 2.0 Type Aport

SD Card Port Supports Micro SD

Media Access 10BASE-T, 100BASE-TX, 1000BASE-T (IEEE-802.3) and PoE

Cable TestPair lengths, opens, shorts, splits,crossed, straight through, andcable ID

ToneGenerator

Digital tone: [455 KHz]; Analogtones: [400 Hz, 1 KHz]

PortsRJ-45 copper port100/1000BASE-X fiber adapterport

88


External ACAdapter/Charger

AC input 90-264 Vac 48-62 Hz inputpower DCoutput 15Vdc at 2 amps ORRJ-45 via PoE

LEDS 2 LEDs (Transmit and LinkIndicators)

Environmental Specifications

OperatingTemperature

32ºF to 113ºF (0ºC to +45ºC)NOTE: The battery will notcharge if the internaltemperature of the Tester isabove 122ºF (50ºC).

Operatingrelative humidity(% RH withoutcondensation)

90% (50ºF to 95ºF; 10ºC to 35ºC75% (95ºF to 113ºF; 35ºC to45ºC)

StorageTemperature -4ºF to 140ºF (-20ºC to +60ºC)

Shock andvibrations

1 m drop test, Random, 3.8grms, 5 Hz-500 Hz (Class 2)

Safety IEC 61010-1:2010: Pollutiondegree 2

Altitude Operating: 4,000 m; Storage:12,000 m

89


EMCIEC 61326-1:2013: BasicElectromagnetic Environment;CISPR 11: Group 1, Class A

Group 1: Equipment has intentionally generated and/oruses conductively-coupled radio frequency energy thatis necessary for the internal function of the equipmentitself.Class A: Equipment is suitable for use in allestablishments other than domestic and those directlyconnected to a low-voltage power supply network thatsupplies buildings used for domestic purposes. Theremay be potential difficulties in ensuring electromagneticcompatibility in other environments due to conductedand radiated disturbances.

90


Certifications and ComplianceStandards

P Conforms to relevant EuropeanUniondirectives.

¡ Conforms to relevant Australian Safetyand EMC standards.

�Complies with 47 CFR Part 15requirements of the U.S. FederalCommunications Commission.

� Certified byULNorth America SafetyStandards

Ã Conforms to relevant South KoreanEMCStandards.

Additional South Korean EMC StandardsInformation

Electromagnetic Compatibility. Applies to use inKorea only. Class A Equipment (IndustrialBroadcasting & Communications Equipment) [1]

[1] This product meets requirements for industrial(Class A) electromagnetic wave equipment and the selleror user should take notice of it. This equipment isintended for use in business environments and is not tobe used in homes.

91


Documents

NETSCOUTSYSTEMS,Inc. LinkRunner™G2 UserGuidee...HomeScreen Tap this icon to view the User Guide. Ta This is the Noti!cation Bar. Swipe down from the top of the screen to open the