Embed Size (px)
Citation preview
NETSPay Release 1.1
New Key Features:
Top-up NETSPay wallet with digitized NETS bank card
Send / Receive Money from fellow NETSPay users via mobile
number or QR code
Send Ang Bao to Friends & Relatives
Scan and Pay via NETS QR code with NETSPay wallet in
Singapore
Scan and Pay for purchases via UnionPay QR code or
QuickPass with NETSPay wallet overseas
Glossary Installation and Registration
o New installation and registration
o Upgrade from R1.0
Digitizing a new bank card
Top-Up Wallet
Sending Money
Receiving Money
Sending Ang Bao
Receiving Ang Bao
Payment
o Set payment default card
o QR payment - User present mode
o QR Payment - Merchant present mode
o Contactless payment
Transaction History
o Digitized Bank Card
o Wallet
Configuration and Setting
New installation and registration
After download, click
‘INSTALL’ to proceed
Click ‘OPEN’ after installation is completed
Click ‘ALLOW’ Click ‘ALLOW’
Go through the introduction screens and click ‘Try Now’ to proceed Click ‘Let’s Get Started’ to begin
New installation and registration
If you have an existing
screen lock, click ‘NEXT’ to
proceed. Else, setup your
screen lock in your phone
settings.
Enter your Mobile Number,
Email Address and Verification
Code. Click ‘NEXT’ to proceed
Click ‘Accept’ if agreeable to the Terms & Conditions
New installation and registration
Click ‘Add cards’ to proceed
Enter the OTP after you received in your SMS
Select your Issuing bank,
Nationality, ID Type and
Enter your ID number
and Last 4 digits of your
Bank Card. Click ‘Next’
New installation and registration
*For OCBC card
provisioning, enter OCBC Card expiry date
Enter your ATM Pin and click
‘Send’. *For OCBC card
provisioning, this step is not required.
Bank Card successfully
provisioned. You will receive an
SMS from your issuing bank after
the card has been successfully
added.
Enter the OTP received
from your issuing bank via your SMS
New installation and registration
Upgrade from R1.0
Installation will begin Click ‘OPEN’ after installation is completed
Click ‘INSTALL’ to proceed
Click ‘Accept’ if
agreeable to the Terms & Conditions
If you have an existing screen
lock already, click ‘NEXT’ to
proceed. Else, setup your
screen lock in your phone
settings.
Enter your Mobile Number,
Email Address and
Verification Code. Click
‘NEXT’ to proceed
Upgrade from R1.0
Enter the OTP after you received in your SMS
You previous provisioned Bank
card will remain. Prepaid wallet will appear.
Upgrade from R1.0
Digitizing a New Bank Card
Click ‘Add New Card’ Enter your ATM Pin
and click ‘Send’. *For
OCBC card
provisioning, this step is not required.
Select your Issuing bank,
Nationality, ID Type and Enter your
ID number and Last 4 digits of your
bank Card. Click ‘Next’. *For
OCBC card provisioning, enter OCBC Card expiry date
Enter the OTP received from your issuing bank via your SMS
Bank Card successfully provisioned. You
will receive an SMS from your issuing
bank after the card has been
successfully added.
Digitizing a New Bank Card
To top-up your wallet
with your provisioned
bank card, Click ‘Top-
Up’
Top-up To Wallet Successful!
Enters amount to top-
Up and click ‘NEXT’
Top-Up Wallet
From Home Screen,
click‘Transfer’ Click ‘Send Money’ Adds Payee and click
‘Next’
Sending Money
Enters Amount and click
‘TRANSFER’
Money Successfully Sent to Recipient
Sending Money
From Home Screen,
click ‘Transfer’ Click ‘Receive Money’ Enters Amount to
Receive and click
‘GENERATE CODE’
Receiving Money
QR code generated. Let
Payer scan the QR code to effect the transfer.
Click ‘Scan’ on NETSPay Home Screen.
Click ‘Transfer’ Money Successfully Transferred to Payee
Receiving Money
Scan Payee’s QR code
From Home Screen,
click ‘Transfer’
Click ‘Ang Bao’ Adds Recipient, Amount
and Customised
Message and Selects
‘SEND ANG BAO’
Sending Ang Bao
Click ‘Confirm’
Ang Bao will be
refunded if not claim within 24 hrs.
Receiving Ang Bao
Ang Bao received notifcation
Click on the Ang Bao Ang Bao credited to your wallet
Set payment default card
A blue tick indicates the
current default card.
Click on the card you want to set as default
Click on ‘Card Details’ This card will be the
default card for payment
Select ‘Set as default card’
QR payment - User present mode
From Home Screen,
Click ‘My QR’
Merchant Enters Amount on
Terminal and Scans your
mobile QR Code for Payment
Transaction Approved
QR payment - Merchant present mode
From Home Screen,
selects ‘Scan’
Scan QR Code for
Payment. For Static QR,
you will be required to enter amount payable
Enters Amount and click
‘CONFIRM PAYMENT’
(This step not applicable to dynamic QR)
Transaction Approved
Contactless payment
Ensure NETSPay is set to default
NFC Payment app on phone
Unlock phone and tap phone on terminal. Ensure NFC setting is
enabled on phone
Transaction Approved Notification received
Click on the bank card Click on
‘Transactions’ Recent transactions will
be displayed on the
screen
Click on a transaction
for more detail
Transaction History – Digitized bank card
Transaction History – Wallet
Click on the Wallet Click on
‘Transactions’ Click on a transaction
for more detail
Recent transactions will
be displayed on the
screen
Configuration and setting – Auto logout
From Home Screen, Click
‘Me’ on the bottom right menu bar
Click ‘Security Settings’ Enter a numerical value between 1
to 99 and Click ‘DONE’. The value
(in mins) will determine the time
NETSPay will auto log out.
From Home Screen, Click
‘Me’ on the bottom right menu bar
Click on the pencil icon on
the top right corner to set your preferred Nickname
Enter your preferred
Nickname and Click ‘DONE’
Configuration and setting – Set nickname
Click on the circle icon
on the top left corner to set your Photo
Using existing image from your
mobile by clicking ‘Choose from
photos’ or take an instant picture
by clicking ‘Take a photo’.
Configuration and setting – Add photos
From Home Screen,
click ‘Me’ on the
bottom right menu bar
Click ‘About NETSPay’ The version number is displayed on top
To learn how to use
NETSPay, Click ‘How to
use NETSPay’ menu.
Configuration and setting – Version
