1888 since MEISINGER MX-Cutters Unique carbide cutters for treatment of non-precious metal and model casting alloy The MX Tungsten Carbide Cutters are used for treatment of non-precious metal and model casting alloy. The special toothing and the extremely resistant material care for a very efficient material removal and a pretty high service life at the same time. During the treatment of the material smooth surfaces are created, so they are optimally prepared for the following polishing process. Due to a precise manufacturing the cutters have great running smoothness, so a very user-friendly working is possible. The variety of cutter shapes allows many kind of uses. The MX Tungsten Carbide Cutters allow both an effective, large-area and a very precise, small-area working. Our sales force would be pleased to answer your questions: +49 2131 2012-303 NEW! At a glance • Precise treatment of non-precious metal and model casting alloy • Maximum removal performance during pretty high service life • Great variety of cutter shapes for many kind of uses • Especially user-friendly working HM73MX HM138MX HM77MX HM261MX HM251MX HM79MX

Neuheitenflyer MX-Fräser [email protected] • MEISINGER MX-Cutter Fax for ordering +49 2131 2012-222 Figure Shank Ref.-No. Size Packaged à Anzahl HM73MX HP (104) 500 104

Download PDF Report

Upload
others
View
0
Download
0

Embed Size (px)

Citation preview

Page 1: Neuheitenflyer MX-Fräser EN...info@meisingerusa.com • MEISINGER MX-Cutter Fax for ordering +49 2131 2012-222 Figure Shank Ref.-No. Size Packaged à Anzahl HM73MX HP (104) 500 104

1888since

MEISINGER MX-CuttersUnique carbide cutters for treatment of non-precious metal and model casting alloy

The MX Tungsten Carbide Cutters are used for treatment of non-precious metal and model casting alloy. The special toothing and the extremely resistant material care for a very efficient material removal and a pretty high service life at the same time. During the treatment of the material smooth surfaces are created, so they are optimally prepared for the following polishing process. Due to a precise manufacturing the cutters have great running smoothness, so a very user-friendly working is possible. The variety of cutter shapes allows many kind of uses. The MX Tungsten Carbide Cutters allow both an effective, large-area and a very precise, small-area working.

Our sales force would be pleased to answer your questions: +49 2131 2012-303

NEW!

At a glance• Precise treatment of non-precious metal and model casting alloy• Maximum removal performance during pretty high service life

• Great variety of cutter shapes for many kind of uses• Especially user-friendly working

HM73MXHM138MX HM77MX HM261MX HM251MX HM79MX

Page 2: Neuheitenflyer MX-Fräser EN...info@meisingerusa.com • MEISINGER MX-Cutter Fax for ordering +49 2131 2012-222 Figure Shank Ref.-No. Size Packaged à Anzahl HM73MX HP (104) 500 104

85FL

112

- 031

Your trade depot: Your delivery address:

Please observe the general instructions for the use and safety of MEISINGER products in the medical field as well as the notes on reprocessing (cleaning, disinfection and sterilization) Hager & Meisinger GmbH medical devices.

Available from the dental trade.

Hager & Meisinger GmbH Hansemannstr. 10 • 41468 Neuss • Germany Phone: +49 2131 2012-0 • Fax: +49 2131 [email protected] • www.meisinger.de

Meisinger USA. L.L.C.10200 E. Easter Avenue • Centennial, Colorado 80112 • USA Phone: +1 (303) 268-5400 • Fax: +1 (303) 268-5407Toll free: +1 (866) [email protected] • www.meisingerusa.com

MEISINGER MX-Cutter Fax for ordering +49 2131 2012-222

Figure Shank Ref.-No. Size Packaged à Anzahl

HM 73MX HP (104) 500 104 277 137 014 014 2

HM 77MX HP (104) 500 104 237 137 023 023 2

HM 79MX HP (104) 500 104 194 137 040 040 2

HM 138MX HP (104) 500 104 198 137 023 023 2

HM 251MX HP (104) 500 104 274 137 060 060 2

HM 261MX HP (104) 500 104 200 137 023 023 2