New Dec 2015 STAR Fourth Edition catalogue

Star International - Worldwide Marine and Offshore Services

Fourth EditionFourth Edition

Star International supplies all types of refrigerants, welding gases, electric welding machines, fire service andsafety equipment to the Marine and Offshore Market. For a complete list of our products and services pleasevisit our website: www.star-international.co.uk

For more information visit our website: www.star-international.co.uk

Star International - Worldwide Marine and Offshore Services

For more information visit our website: www.star-international.co.uk 1

Contents Page

Refrigeration gases, cylinder overhaul, air-conditioning and maintenance..... 2

Marine Refrigeration Spares and Servicing............................................................. 3

Star Chemicals......................................................................................................... 4

Star Chlorius 2......................................................................................................... 5

Hypertherm Powermax 30® Plasma Cutter.............................................................. 6

Electric Welding Equipment................................................................................... 8

Oxy-acetylene Integra® Cylinders.......................................................................... 10

Den-Sin Ultimate Water Jetting System................................................................ 12

Rescue Boats........................................................................................................... 15

Marine Safety Equipment....................................................................................... 18

Fire Rescue Service and Supplies........................................................................... 20

Gas Detectors......................................................................................................... 22

Ships Hospital Medical Oxygen System................................................................ 24

Emergency Response Kits....................................................................................... 26

Powerheart® AED G5 Automatic.......................................................................... 28

Star EndoSan.......................................................................................................... 29

For more information visit our website: www.star-international.co.uk2

Star Refrigerants - RS Series of drop-in zero ODP refrigerantsAll of the RS series of refrigerants are non ozone depleting with a safety classification of A1 and can be used both withtraditional lubricants (eg mineral and alkyl benzene oils) and the new synthetic lubricants such as polyolnesters. They providea simple and low cost method of switching away from CFCs and HCFCs including the interim ozone depleting blends.

Refrigerant: RS 24 R426AWt: 13kg Product No: 01010071Refrigerant: RS 44 R424AWt: 13kg Product No: 01010069Refrigerant: RS 45 R434AWt: 13kg Product No: 01010013Refrigerant: RS 50 R442AWt: 10kg Product No: 01010078Refrigerant: RS 52 R428AWt: 13kg Product No: 01010073Refrigerant: RS 70 R453AWt: 10kg Product No: 01010086

Refrigerant: RS 24 R426AWt: 50kg Product No: 01010072Refrigerant: RS 44 R424AWt: 50kg Product No: 01010070Refrigerant: RS 45 R434AWt: 50kg Product No: 01010014Refrigerant: RS 50 R442AWt: 50kg Product No: 01010079Refrigerant: RS 52 R428AWt: 50kg Product No: 01010074Refrigerant: RS 70 R453AWt: 50kg Product No: 01010085

RS 24 R426A Outside ECWt 13kg Product No: 01010083RS 44 R424A Outside ECWt: 13kg Product No: 01010082RS 45 R434A Outside ECWt: 13kg Product No: 01010081RS 50 R442A Outside ECWt: 13kg Product No: 01010090RS 52 R428A Outside ECWt: 13kg Product No: 01010084RS 70 Outside ECWt: 13kg Product No: 01010091

Cylinder - 13 Ltr Cylinder - 60 Ltr Disposables - DOT-39

HFCs Refrigerants

Refrigerant: R134AWt: 13kg Product No: 01010004Refrigerant: R404AWt: 10kg Product No: 01010006Refrigerant: R407CWt: 13kg Product No: 01010008Refrigerant: R417AWt: 10kg Product No: 01010034Refrigerant: R4 10AWt: 11kg Product No: 01010010Refrigerant: R422AWt: 10kg Product No: 01010068Refrigerant: R422DWt: 11kg Product No: 01010063Refrigerant: R437AWt: 12kg Product No: 01010013

Refrigerant: R134AWt: 57kg Product No: 01010005Refrigerant: R404AWt: 49kg Product No: 01010006Refrigerant: R407CWt: 57kg Product No: 01010009Refrigerant: R417AWt: 57kg Product No: 01010033Refrigerant: R4 10AWt: 48kg Product No: 01010011Refrigerant: R422AWt: 53kg Product No: 01010066Refrigerant: R422DWt: 52kg Product No: 01010015Refrigerant: R437AWt: 57kg Product No: 01010080

Cylinder - 13 Ltr Cylinder - 60 Ltr

*All disposable cylinders can only be supplied outside EU

Retest and refurbishing of all refrigerants Cylinders/TanksAll cylinders are tested to the following standards: • BS EN 1968 • BS EN 1803 • BS EN 1802

Retest/refurbishmentRefrigerant Cylinder Retest – up to 60L Product No: 01010023High Pressure Cylinder Retest – up to 50L Product No: 01010030Internal Shot blast Product No: 01010075Internal Oil Wash Product No: 01010022External Prime and Top Coat Product No: 01010087External Blast, Prime & Top Coat Product No: 01010088Assemble and Supply Vapour / Liquid Valves Product No: 01010089

Refrigerant ProcessingOil/Water/Nitrogen Product No: 01010076Removal

Distillation Product No: 01010077

Waste Product/ Product No: 01010026Refrigerants Disposal

Refrigerant: AmmoniaWt: 108 Ltr Product No: 01010028

Recovery CylinderWt: 55.5 Ltr Product No: 01010019

Additional Items

Star Distribution Centres Worldwide• Baghdad • Bahrain • Cyprus • Denmark • Dubai • France • Germany • Greece • Ireland • Madrid • Nigeria • Saudi Arabia • Sweden • United Kingdom • USA & Canada


Marine RefrigerationSpares and ServicesStar International has been working with all the leading suppliers and manufacturers to produce a service to help you, the customer.

Refrigeration Spares

Quality refrigeration spares supplied, new and reconditioned compressors, full range of spares, 10,000 top head overhaul kits available. We pride ourselves in being able to supply some of the most difficult to source items at competitive prices.

• CARRIER • STAL • YORK • SABROE • DAIKIN • J&E HALL • MYCOM • CARLYLE

We have fully qualified marine refrigeration engineers(Flying Squads) available 24/7 to carry out retrofitand maintenance work.

Air Conditioning Units

We can supply a wide range of air conditioning unitsand spares splits/doubles/VRV’s

• MITSUBISHI • DAIKIN • HITACHI

A large variety of coolants including Castrol, Mobil,Zerol, Shell, Solest and Bitzer.

Refrigeration Care Tools

A comprehensive and affordable tool range that helps to reduce refrigerant consumption and system breakdowns.

• Refrigerant recovery and charging products• Refrigerant leak detection products• Vacuum products• Refrigeration tool kits

Air Compressors

• HAMWORTHY • ATLAS COPCO • INGERSOLL RAND • COMPAIR • BROOMWADE


Star ChemicalsWe offer a comprehensive range of high quality cleaning and maintenance products, fuel additivesand water treatment chemicals.

We believe chemical safety and cost effectiveness are of prime importance.

Star International operates a worldwide network. For more detailed information ask for a copy of ourChemicals booklet or visit our website at: www.star-international.co.uk

CLEANING AND MAINTENANCE

FUEL OIL TREATMENTS ANDCOMBUSTION CATALYST

BIOLOGICAL PRODUCTS

WATER TREATMENTS

WATER TREATMENT TEST KITS

FUEL OIL TEST KITS

SERVICES

• On-Board Water Testing and Services • Ultrasonic Cleaning Modules• Fresh Water Safety Plan

• Test Strips • Fuel Bacteria Testing• Star Chemical Treatment & Water • Marine Sewage Treatment• Test Kit Selector • Galley Hygiene• Boiler & Cooling Water Systems • Comparator System• Reagents - split tablets / liquid • Digital Incubator• Potable Water Test Kits • Microbiological Tests• Silver Ionisation • Test Meters• Ballast Water Exchange

• Water in Oil test Kit • Density Meter• TBN Test Kit • Viscosity Meter• Combined Oil Test Kit • Bunker Sampler• Compatibility Test Kit • Oil Test Centre• The Fuel Oil Test Cabinet


Star Chlorius 2 Cruise Ships and Merchant Vessels

Applications

• Drinking water disinfection• Water circuit treatment (biofilm removing and prevention)

Ballast water disinfection

• MIC bacteria• Norwalk control• Deck swabbing

Potable water disinfection (on board and from intake)

• Water circuit and tank cleaning/stand disinfection (biofilm removing and prevention)• Legionella prevention and control• Cooling systems• Control of MIC bacteria (fresh water holding tanks)• Norovirus control / decontamination• Deck swabbing Sanitizer for hard, non porous surfaces (food and non food contact )• Sanitizer for transportation, loading and hauling equipment• Sanitizer for restaurants, bathrooms and bars• Sanitizer for dishes, glassware, sinks, utensils and kitchenware• Defouling of RO systems / desalinators• Ice machine and ice treatment• Fogging areas between people or after an illness• Bilge water between ports• Jacuzzis and hot tubs• Fruits and vegetables washing• Carcass washing• Fish odor in holds• Sterilization of bulk storage compartments


Hypertherm Powermax 30®

The revolutionary, self-contained,‘plug in and use’ Plasma System.• Easy metal cutting• Built-in air compressor• Fully self-contained• Professional grade plasma system• Can be used in virtually any location

AIR T30 hand torch

Capacity Thickness Cut speed CuttingRecommended 8 mm 500 mm/min 10 mm 250 mm/minSeverance 16 mm 125 mm/min

Power Supply System part number with 4.5 m AIR T30 torch

120-240 V 088098

Ordering Information

High performing technologyThe new patent-pending consumable designs enable consistent cutting by optimizing the air flow from the compact, internal compressor. Coupled with the highlyeffective moisture removal system, the Powermax30®

AIR provides great cut quality and performance in hot and humid conditions.

Consumable type Torch type Amperage Shield/Deflector Retaining cap Nozzle Swirl ring Electrode

Standard Hand 30 00650027 00650028 00650030 00650029 00650031

Torch consumable parts

Hypertherm genuine accessoriesalso available

Easy-to-setup and operate

• Operate it anywhere with the internal air compressor.• Plug into any 120 or 240 V power with Auto- Voltage™ technology and included plug adapters.• Highly portable. The smallest, lightest weight system in its class.

Finish jobs faster

• Do more in less time. Fast cutting speeds and superior cut quality result in less secondary operations.• Quickly cut metal grate or rusted metal without retriggering with the continuous pilot arc feature.• One tool to cut a variety of metal types and thicknesses.

Rugged and reliable

• New AIR T30 torch is rugged and designed to withstand the toughest environments.• Robust internal air compressor eliminates the costs associated with an external compressor.• Hypertherm Certified™ reliability ensures performance in the most demanding environments.

System includes

• Power supply, AIR T30 hand torch with 4.5 m lead and work clamp with 4.5 m lead• Operator and safety manuals• 1 nozzle and 1 electrode • Carrying strap

Electrodes Star International office has installed a fast responsecentre, equipped with all the latest facilities, specificallyto increase speed of service to you, the customer.

Star can offer different diameter size of electrodes -2.0mm to 6.0mm if required, as with each packet wecan offer the BLISTER PACKS (4pcs) to check thatyou have the right electrode to do that specificjob...electrode packing comes from 1 kilo - 4 kilopacks, bigger packs are also available if required.

Mild and Low Alloy

• STAR GPO-6013• STAR LH-7018• STAR LH-7016• STAR LH-8018

Stainless Steel

• STAR STAIN-316L• STAR STAIN-309MoL• STAR DUPLEX-2209

Special High/Hard mixed Steel

• STAR STAIN-316L• STAR STAIN-309MoL• STAR DUPLEX-2209

Special Cast Iron

• STAR CAST NICKEL• STAR CAST Ni-Fe

Bronze Al-Bro

• STAR TINBRONZE• STAR AL-BRONZE• STAR ALUMINIUM

Stud Remover

• STAR STUD REMOVER

Cryogenic High Temperature Electrodes

• STAR INCO

Cutting & Gouging

• STAR GOUGING

Electrodes

Blister Packs

Star Number Star products Dia Weight

mm Pkt

006-30000 Star Silver 55% 2.0mm 0.5 kg

006-30001 Star Silver 45% 2.0mm 0.4 kg

006-30002 Star Mild Steel 2.0mm 3.5 kg

006-30003 Star Mild Steel 3.0mm 3.5 kg

006-30004 Star Alu-Mag 3.0mm 0.5 kg

006-30005 Star Coated 2.0mm 1.0 kg Bronze

006-30006 Star Coated 3.0mm 1.0 kg Bronze

006-30007 Star Bronze 3.0mm 1.7 kg

006-30008 Star Bronze 5.0mm 3.0 kg

006-30009 Star Coated 3.0mm 1.0 kg Wear-Bro

006-300010 Star Coated 5.0mm 1.1 kg Wear-Bro

006-300011 Star Coated 4.0mm 0.7 kg Cast-Iron

Gas Brazing Rods



Electric Welding Equipment GYSMI 200E FVInverter technology, microprocessor controlled welding unit with keyboard and digital display. Multi-purpose equipment, will work on a 16a-230vpower supply even for intensive use.

MMA

With its high duty cycle and revolutionary arc dynamics, it will weld any kind of electrodes (ø 1.6 à 5 mm): steel, stainless steel, cast iron, rutile, basic orcellulosic. This product ensures a stable arc with aconstant intensity and features the following technology.• Anti-Sticking• Adjustable Hot Start: Makes it easier to arc with any type of metal (Low Hot Start: For thin metal sheets - High Hot Start: for metals that are difficult to weld such as dirty or oxidized sheets)• Arc force: For better penetration and prevention of sticking.

TIG LIFT

Equipped with a TIG torch with valve (optional), thismachine ensures you to have a smooth welding line.

• TIG Lift: The arc is created by touching the metal with the tungsten electrode -avoiding tungsten inclusions and radio electrical disturbances.• Automatic arc release: This innovative function allows the operator to finish welding without creating craters. The time is adjustable and the function is activated by a movement of the torch.

Product delivered in a case with accessories:• Earth clamp (1,6m/ø 16mm²) • Electrode holder (2m/ø 16mm²)

OPTION: TIG TORCH• Length: 4 m• Connector 10/25 mm²

IN ANY SITUATION


MASTER 250 / 300 / 350traditional MMA (stick) welding machine for intensive use.

• 3-Phase power supply - 400V• Easy to use: 1 potentiometer with 7 positions • Ventilated• Thermal protection

The MASTER 250 can weld electrodes from ø 2.5 to 4 mmThe MASTER 300 can weld electrodes from ø 3.2 to 5 mmThe MASTER 350 can weld electrodes from ø 3.2 to 6 mm

Accessories (optional)

Electrode holder:• 300A - ø35mm² - 4m• 500A - ø50mm² - 4m

Power supply & accessories not included.

Earth clamp:• 300A – ø25mm² - 4m • 400A – ø35mm² - 4m • 500A – ø50mm² - 4m

Electrode holder

Earth clamp


Oxy-acetylene Integra®

Cylinders...our safest yet!

Main Features

• Built-in, fully adjustable, regulator• Active content gauge• Outlet pressure gauge• Quick connector with integrated flashback arrestor• Safety cut-off in outlet quick connect• Ergonomic valve guard• Easier and safer to handle 30 litre cylinders

Active Content Gauge

• Always shows cylinder content -even when not in use• Eliminates the risk of selecting cylinder with insufficient content for job

Quick Connector/FBA

• Combined quick connect and flashback arrestor (FBA)• Unique design male/female connection• Oxygen and acetylene connector/FBA cannot be interchanged• Improved design to reduce risk of accidental disconnection

Quick Connector

Ensures safest use every time the cylinder is used (optimum level 2 safety). Snap-on connection tocylinder - no spanner needed. Additional safety lockingand release device prevents accidental removal.

Built in safety devices:

• Safety locking and release mechanism • Flame arrestor• Non-return valve• Thermal cut-off valve• Dust filter

The INTEGRA cylinder has been awarded the TUV Safety Test Mark• Additional safety • Easy to use • Time saving tested • User tested

Quick Connector

Active ContentGauge

Quick Connector/FBA

Contents gaugeAlways shows how much gas is left,even when cylinder is not in use

Built-in regulatorCalibrated and maintained by gas manufacturer, regulates outlet pressureto 4 bar.Incorporates residual pressure valve to prevent contamination of cylindercontents.

Valve guardWith integrated handle, prevents accidental damage tobuilt-in regulator.

Quick-connect gas outletAllows direct connection to your welding machine.

Gas economisersFlow rates to suit your application.Connect direct to your welding hose and snap on to quick-connect gas outlet


Independently safety-tested guard designExceeds requirements of EN962. Protects all critical components and provides full access to valve operation. Safer, easier handlingwith the rotating, rolling knob

Variable pressure control (0-8 bar)Suitable for all cutting, welding andbrazing applications

Contents gaugeAlways shows how much gasis left, even when cylinder is not in use

Safety gas cut-offSafety device in valve outlet ensures no gas flow if the quick connector is not fitted to the valve

Star X21 Cutting & Welding SetProduct Code: 00640000Covers all the welding, cutting & brazing work thatmay occur on-board your vessel

Cutting AttachmentsProduct Code: 00640009Covers all the welding, cutting & brazing work thatmay occur on-board your vessel

Star X21 Cutting & Welding Set

Cutting attachments

Star/Marine Gas Cylinder Comparison

Marine Oxygen Cylinder Star Oxygen Intergra Cylinder 40 ltr /150bar 30 ltr / 300bar Gas Capacity: 6.4m3 Gas Capacity: 9.25m3

Weight: 52 kilo empty / 60 kilo full Weight: 49.25kg empty / 61.70 full

Marine Acetylene Cylinder Star Acetylene Intergra Cylinder 40 ltr 30 ltr Gas Capacity: 5.6m3 Gas Capacity: 5.4m3

Weight: 67kg Tare weight / 73kg Gross Weight: 50kg empty / 56kg full

Product Code Product Description

00510004 Oxygen Cylinder X1001220012 Oxygen X30s Integra01220046 Oxygen X4701220049 Acetylene X1000510001 Acetylene X30s Integra01220047 Acetylene X4701220019 Argon X1001220020 Argon X3001220018 Argon X47


Star International are the Sole UK & Ireland officialdistributors for Den-SinUltimate Water Jetting Solutions

The Merlion II Heavy Duty High-Pressure WaterBlasters offer powerful and cost efficient cleaning forprofessional users. Model range has electric, dieseland petrol powered machines.

Diesel and electric powered models across the full range

Merlion Plus Heavy Duty E500Part No - 01410014Available in 250, 350 and 500 bar pressures

Mermaid Slimline E500Part No - 01410006

Available in 500, 800 and 1,100 bar pressures

Mermaid E800Part No - 01410011Available in 500, 800 and 1,100 bar pressures

Den-Sin are a leading manufacturer of professionalheavy duty high pressure water blasting equipment, and a member of the well-established Nilfisk-Advancegroup of companies.who offer a wide range of heavyduty high pressure water blasters, providing a powerfuland cost effective cleaning process for the removal ofrust, paint, marking and graffiti on steel and concretesurfaces.

Star International offer the full Den Sin range including all spare parts and we ensure that our prices are competitive. Below is a brief overview ofthe products and services we will offer, including allspare parts for every machine across the range.

The Merlion 250/350/500 Range

The Mermaid Heavy Duty Series can be usedthroughout the Marine/Shipping Industry:

• Bulk Carriers • Offshore• Container Liners • Manufacturing• Crude Carriers • Building and Construction• Marine/Shipping

The Mermaid Slimline Series has been specially designed for the Marine/Shipping Industry and offerspowerful, cost efficient cleaning for professional users.

• Bulk Carriers • Container Liners • Crude Carriers• Width reduced to 630mm for easy navigation along narrow vessel passageways.

The Mermaid E500/E800/E1100 Heavy Duty and Mermaid Slimline Series


The H-110 and H-200E electric powered model andC110 and C200 Air. High-pressure Cleaners are theideal cleaning tool for degreasing applications. The airpowered machines have an intrinsically safe air motor.

Used in daily cleaning in many industries including:• Marine Contract Contractors• Marine Cleaning• Oil Rigs (Air Powered Models)• Tankers (Air Powered Models)• Chemical Plants (Air Powered Models)• Wet Sand Blasting Equipment• Complete list of optional accessories available

Blueline H-200EHeavy DutyHigh Pressure CleanerPart No - 01410040

Available in 110, 170 and 200 bar pressures

The petrol and diesel powered series of High-PressureCleaners offers total independence of external powersupply giving the user a high degree of mobility andfuel efficiency. Used in many industries including:• Marine• Manufacturing• Building and Construction

C-150D Heavy DutyCold Water High Pressure CleanerPart No - 01410047

Available in 150, 160 and 200 bar pressures

A complete range for all professional applications.Available in electric powered and diesel powered • 6 Cyl turbo charged w.intercooler air cooled engine• Throttle Control• Booster Pump• Diesel Engine Speed - 1800rpm• 250 litre Stainless Steel Water Tank

Used in many industries including:• Marine/Offshore/Rigs• Shipyards• Heavy Manufacturing• Shipyards• Container Liners

Ultra High Pressure Jetting SystemsPart No - 01410015

Available in 800, 1000, 1400, 2000 and2,500 bar pressures

Den-Sin Ultimate Water Jetting Solutions

Blueline Hot and Cold Water & Air PoweredHigh Pressure Cleaners

C-150D, C-200D, C-160P and C-200PPetrol and Diesel Powered Heavy Duty Cold Water High Pressure Cleaners

Ultra High Pressure Jetting Systems

Den-Sin Ultimate Water Jetting Solutions

Zero Thrust Underwater Divers Gun

Good range of heavy duty high pressure waterblasters, providing a powerful and cost effective cleaning process for the removal of marine underwatergrowth, rust, paint, and concrete surfaces.

• Functional Ergonomical design to reduce diver’s fatigue, increase mobility and productivity.• Large nozzle carrier which is not easily damaged during deployment.• Quick connect screw coupling and swivels.• Safety trigger to protect against accidental triggering.• Easy service trigger valve.• DEN-SIN equipment can be adapted to underwater grit blasting, and underwater metal cutting tools.

• Internal and external cleaning of drill pipes prior to inspection, boiler tube & heat exchanger cleaning, internal & external • Model: Den-Sin C-800/63D C-1000/48D & C-1400/38D• Accessories include foot operated dump valve, flexible lance with fixed and rotated nozzles. Air operated single inline tube.

Drill Pipe Inspection Services, Petrochemical Services

Ultra High Pressure Jetting Systems


Star International can supply the complete range of recommended Spares/Accessories/PPE for all Den-Sin machinesfrom100 - 2,500 Bar.

Accessories/PPE

Cleaning in progress


Rescue Boats

Technical Characteristics

General Description

In full compliance with S.O.L.A.S. new requirements, the new rescue boat SV-420 design increases both length and beam, providing a 25% increase on the useful space on deck with regards to the previous model (SV-400).

Therefore the new rescue boat SV-420 enables toplace the new approved stretcher on deck, which is acompulsory requirement, to carry an injured person.On top of that the rescue boat SV 420 has transverseseats for all the passengers and a bow locker to storeall the necessary equipment.

This new length rescue boat intends to improve boatcapacity and performance, allowing a quicker and moreeffective answer when facing an emergency situation.

MODEL SV-420

Length Overall 420 cmLength Inside 306 cmBeam Overall 207 cmBeam Inside 123 cmMaximum Depth 100 cmMaximum Diameter 50 cmNo of Compartments 5+1Engine Size 25 CV or 40 CVEngine Shaft Type LargeMax. authorized payload 716 kgWeight of boat 200 kgApprox. Weight fully loaded 916 kgMax. authorized no of persons 6

S.O.L.A.S. Approved Rescue Boat


Rescue Boats

S.O.L.A.S. Approved Rescue Boat SV-480

General Description

In compliance with the latest S.O.L.A.S. requirements,the new rescue boat SV-480 layout has been designedand approved in order to allow navigation by using anadapted driving position, as well as navigation withtraditional outboard engine with tiller.

Approved for a 40 hp minimum engine power and 75hp maximum engine power, the driving position willallow a more comfortable boat operation, improvingthe reaction time in case of emergency.

There is enough room on the deck to place the approved stretcher - mandatory installation - for injured person transportation. Besides, the boat hastransverse seats for all the passengers and a bow lockerto storage the necessary equipment.

MODEL SV-480

Length Overall 480 cmLength Inside 354 cmBeam Overall 210 cmBeam Inside 110 cmMaximum Depth 100 cmMax. Tube Ø 51 cmNo independent Compartments 5+1Max. authorized motor power 40/50/60 or75 CVEngine shaft type LongMax. authorized payload 718 kgApprox. weight of boat 250 kgApprox. weight fully loaded 968 kgMax. authorized no of persons 6Approval S.O.L.A.S.



General Description

The FRB700 Rigid Inflatable Boat is designed for rescue operations on high seas with a maximum capacity of 10 people under CAT B and 20 in CAT C.The initial configuration is for a crew of 3 and onestretcher seated on 2 x JS1 Jockey seats and LeaningPost for the pilot.

The console is wide and protects the pilot against thewind and spray with sufficient space to install state of the art electronic equipment as well as the enginecompartment. It is connected to the single pointhoisting system with quick release mechanism toallow a quick and stable deployment and retrieval.

It is equipped with a 220hp Inboard Diesel Engineand can come with either a Jet or Z Type propulsionsystem. Fuel is supplied via a 200lt fuel tank locatedunder the deck and offering an autonomy of 4 hoursand maximum speed of 32kt depending on sea state.

MODEL FRB-700

Total Length 707 cm Inside Length 565 cm Total Beam 276 cm Inside Beam 160 cm Height 160 cmTube Diameter 59 cmNo of compartments 5+1Engine VOLVO DS-220 HP (SOLAS)Jet Hamilton HJ213Maximum Speed 32 ktFuel Tank 1x200ltConsumption 46,50 lt/hrAutonomy 4 hrCapacity Persons Cat B/C 10/20Weight 1.590 Kg.Weight Loaded 2830 kg. / 3680 Kg.Maximum Weight Cat B/C 1240 kg./2090 kgDesign Category C/B


Narwhal FRB 700

Stretcher

Seating

Engine compartment

Fuel Tank Cover


Marine Safety Equipment

Star International have a comprehensive range ofSafety Equipment. We are happy to provide advice andguidance on the selection of the most appropriateproduct for you giving the benefit of our many years ofexperience in this industry.

Feel free to contact us with questions on any of ourSafety Equipment. For more detailed information pleasevisit our website: www.star-international.co.uk

Hansson Pyrotechnic Range

4 Year Expiry DateAll MED Ships Wheel ApprovedRange includes:Red Parachute Rocket, Red Hand flare, BuoyantOrange signal, Man-Over Board signal complete withbulk head bracket, Self-contained Line Throwing Unit(incorporates rocket and igniter and 300m of line)

Life Jackets

Full range Foam and Inflatable. SOLAS/MED ApprovedAdult foam filled life jacket150N and 275N Inflatable Life jacketsFitted with Whistle, Light, Retro-Reflective tapeas standard

The Interlock 275 is specially designed for use as acombined working/abandonment lifejacket. With 300Newtons of buoyancy it is designed to be worn whenthe user is wearing heavy duty clothing or with anabandonment suit - where it guarantees to self rightthe wearer in less than 5 seconds. The patentedinterlocking lobe design also creates an effective wavebarrier preventing water channelling into the airways.The lifejacket design gives good neck and headsupport which is particularly vital for an unconsciouswearer.

Immersion Suits

Non-Thermal and Insulated SOLAS/MED ApprovedFully waterproof, Inherent buoyancyNeoprene gloves and socksSupplied in Universal and XL sizes


New, improved Neil Robertson Stretcher

Neil Robertson Stretcher

Designed for use in difficult situations where the patient has to be lowered or lifted.

Invaluable on board shipDocks, Mines and FactoriesRescue work, cliff face or mountain Air-Sea rescueIn all large industrial undertakings

• 18oz rotproof cotton duck• Elongated straps to accommodate splints• Improved carrying handles• Polypropylene rope• Improved head restraint• Optional pillow• Size open 5’ long, x 3’4” wide• Size folded 5’ long x 15” x 7”

Jason Cradle

Designed to retrieve people quickly and safely in theHorizontal position from the waterStandard unit is suitable for most vessel’s up to a 3mtrfree board. Larger cradles can be supplied to suit freeboard of vessel

Lifebuoy and Lifebuoy lights

SOLAS/MED Approved

Embarkation and Pilot Ladders

Made to customers requirements and meet the newIMO requirements

First Aid Kits

SOLAS/MED ApprovedSupplied as a soft packCat ‘C’ or SOLAS variant

Hammar Hydrostatic Release Units

Hammar H20 hydrostatic release units are approvedall over the worldHydrostatic release units are designed for liferaftsfrom 6 up to 150 person and epirbs


Fire Rescue Service andSupplies

Star International have an excellent range of FireRescue Equipment all designed not only to meet thesafety requirements but also to work efficiently and effectively if there should ever be an emergency. We are also happy to provide advice and guidance onthe selection of the most appropriate product for yougiving the benefit of our many years of experience inthis industry. Feel free to contact us with questions on any of our Fire and Safety Equipment. Star International offer a comprehensive selection of FireRescue Service and Supplies on our website:www.star-international.co.uk

Fire Extinguishers and B.A. EEBD'S are marine approved and tested prior to delivery and suppliedwith full certificate.

All fire fighting equipment - portable and suppressionsystems can be fully serviced by our FRS Service Team.


• We service, repair and supply breathing apparatus.

• We service, repair and supply Escape Sets (EEBD).

• We service, refill and hydrotest fire extinguishers.

• We offer a vast range of fire fighters equipment,hoses, nozzles, lifelines, control boards, fire fighters outfits, helmets and boots

• We service and maintain air compressors, we alsocarry out on site Air Quality Analysis.

• We also hold spares from all the major manufacturersof FFE equipment.


Gas Detectors

Gas Detectors that can be purchased from Star International

• Ventis MX4 • Altair / Altair Pro • MX6 • Reiken Keiki• Altair 4, 4x, 5, 5x gas detectors • Gasbadge-Plus & Pro • MSA detectors

Gas Detectors we can re-calibrate

• Gasbadge - Plus & Pro • Autostep • Altair / Altair Pro • Odalog • PAC 7000 • APTK • M40 • AirQual 1 • ITX • InterscanTesto • Ventis MX4 • ToxiRAE Pro PID• MX6 • Photovac • Altair 4, 4x, 5, 5x • Reiken Keiki • X-am 5000 • MSA• BM25

Gas Alert Clip ExtremePart No: 00810063

Ventis MX4Part No: 00810002

T4 Portable Multigas Detector

T4 contains a wide range of features to make everyday use easier and safer:

TWA Resume function: Unique to T4, this innovativefeature ensures toxic gas exposure is calculatedaccurately over an entire shift, even if T4 is switchedoff for a break or during travel to another site.

24 hour battery life: Safely work multiple or longershifts between charges, covered by the exceptional 24 hour battery life.

Backlit display: Large clear display with backlight andoption to flip the screen 180° for easy viewing whilst worn.

Rugged design: With a thick anti-shock rubber casingand drop tested to 4 metres on concrete, T4 providesdependable operation under the most demanding use.Water & dust resistant to IP65 & IP67.

Positive Safety indicator: A simple ‘traffic light’ statusindicator which, at a glance, provides visual assurance ofoperational and compliance status to both users andsupervisors.Green light - Working safelyRed light - Attention required

Intrinsically safe: Approved for ATEX Zone 0 andUL Class 1 Div 1 for operation in the widest range ofenvironments.

Dedicated sensors: One sensor for every gas ensureseffective, fast and reliable detection.

Multiple alarms: Audible 95dB alarm, bright red/blue LED’sand vibrating alerts provideeffective warning to gas hazards.

Easy operation: Large single button and intuitive menusystem minimise training and allow easy operationwhilst wearing gloves.

T4Part No: 00810094

Gas Alert Clip Extreme

Features & Benefits• Continuous LCD shows real-time gas concentrations• Compact and lightweight design makes it comfortable to wear• Water-resistant• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up• Bright wide-angled visual alarm bars• Built-in concussion-proof boot• Multi-language support in English, French, German, Spanish

Ventis MX4

Features & Benefits• Detect From 1-4 Gases• Draw Samples from up to 100ft• IP66 and IP67 Certified• Available in Black or Orange• iNet Compatible• Optional Extended Range Battery (20hrs)


Disposable Calibration GasesCalibration Gas Mixtures are essential for the safeworking of gas detection equipment. Using small, disposable canisters is far more convenient than large,high-pressure cylinders. Small canisters can be easilystored in filing cabinets, drawers, etc, there is no costlyrental charge and they are much easier to move around.

When empty they can be recycled. Large cylindershave to be stored in a bunker or chained up and theyusually incur rental costs and stricter Health & Safetyregulations.

Star International offer a comprehensive selection ofDisposable Calibration Gases, please contact us withany questions you may have about these products.

Part No: Disposable Specification Cans and Cylinders

Part No: Gas Handling & Accessories

01210013 S-Can5 5 Litre can, filled with non-reactive mixtures (eg LEL, CO, CO2)01210000 S-Can20 12 Litre can, filled to 12bar with non-reactive mixtures (eg LEL, CO, CO2)01210001 S-Can20R 12 Litre can, filled to 12bar with reactive mixtures (eg H2S, SO2)01210002 S-Can34 34 Litre can, filled with non-reactive mixtures01210003 S-Can34R 34 Litre can, filled with reactive mixtures01210014 S-Can58 58 Litre cylinder, filled with non-reactive mixtures01210004 S-Can58R 58 Litre cylinder, filled with reactive mixtures01210015 S-Can110 110 Litre cylinder, filled with non-reactive mixtures01210008 S-Can110R 110 Litre cylinder, filled with reactive mixtures

01210005 S-Flow Control valve and flow indicator for use with S-Can5, 20 & 20R01210007 S-Spray Trigger controlled reusable spray nozzle for use with S-Can5, 20 & 20R01210006 S-Reg Pre-set flow regulator c/w pressure gauge for use with S-Can34, S-Can 58 and S-Can 112. Standard flow rates of 0.3, 0.5, 1.0, 2.5 and 3.0 litres/min others available on request012100016 Multiflow Flow regulator for S-Can34, 58 and 105 with user adjustable, fixed flow rates of 0.3, 0.5, 0.7, 0.9, 1.2, 1.5, 2.0, 2.5 and 3.0 litres/min01210017 S-RegSS Stainless steel pre-set regulator recommended for use with S-Can58R01210018 PressReg Two gauge single stage regulator for use with S-Can110 (reactive)01210019 PressRegSS Stainless steel single stage regulator for use with S-Can58, 110 (reactive)01210020 DF-Flow S-Flow designed to regulate flow for instruments with internal pumps, for use with S-Can5, and S-Can2001210009 DF-Reg Demand Regulator for instruments with internal sample pumps for S-Can58 and 11001210010 DF-RegSS Stainless steel demand flow regulator for S-Can34, 58 and 11001210021 Case2 Lightweight, water resistant case to house 2 x 58 or 110 litre canister01210022 COA Certificate of Analysis

Calibration Gases

Regulators

Disposable Gases


Ships Hospital Medical Oxygen System

A Ships Hospital Medical System that meets all theIMDG/MFAG requirements for bedside medical oxygen systems. The complete package includes all the relevant devices which meet the requirements ofISO standards and are CE marked.

Installation is simple and only requires two fixing boltsand two fixing screws to the ships bulkhead.

Contents:

Flowmeters - twin flowmeters, 0-15 litres per minute flow, supplied with rail mounting for attachment to bulkhead and 1.5 metres of medical oxygen supplyhose and connections.

Regulator - power drive medical oxygen regulator with bullnose BS No. 3 cylinder connection or pinindex connection to BS1319 and EU Standard. Other connections are available to U.S. and EU standards.

Cylinders - the standard pack is supplied with a 40Litre WC x 200 bar medical oxygen cylinder, fittedwith a bullnose BS No. 3 side outlet connection. Other cylinder sizes and valves with alternative connections are available, i.e. pin index to BS1319,U.S. and EU standards.

Cylinder Clamp - steel powder coated clamp withtwo fixing points, hinged half way for easy openingand fitted with locking pin.

Consumables Pack - contains two humidifier bottles(250ml each) which are autoclaveable. One disposableadult manual resuscitator (BVM) complete. Fivedisposable 24% oxygen masks and tubing and fivedisposable high concentration mask and tubing.

Other hospital and emergency medical products areavailable i.e. suction units, defibrillators, portableresuscitators and first aid equipment.

Flowmeters

Regulator

Cylinders Cylinder Clamp

Consumables Pack


Cylinders and Valves

Product Code Product Description

00720001 2 Ltr Breathing Oxygen Cylinder Full00720003 5 Ltr Breathing Oxygen Cylinder Full00720004 10 Ltr Breathing Oxygen Cylinder Full00720005 40 Ltr 200 Bar Breathing Oxygen Cylinder Full00720005 50 Ltr Breathing Oxygen Cylinder Exchange Full

All our cylinder range can be supplied with or withoutcylinder valves and painted for the appropriate service.We can also offer a range of re-certified and fully re-conditioned cylinders. Please ask for details.

Product Code Description Thread

00710049 Pin Index - Oxygen 17E(.715) Taper

00710048 Pin Index - Oxygen 25E(28.8mm) Taper

00710047 Pin Index - Oxygen M18 Parallel

00710049 Pin Index - Oxygen 19E Taper

We can supply valves for other types of connections on request.

Cylinders

Valves

For fully comprehensive listings and descriptions of all our products and services please visit our website:

www.star-international.co.uk


Oxylator® FR300 Fully Automatic Resuscitation Kit

All Portable Oxygen Inhalers are supplied with achoice of oxygen cylinders and five different regulators packed in a rectangular case with carryhandles, shoulder strap and storage pockets.

Also included in the Portable Oxygen Inhaler Kit:

• 2 disposable therapy non-re-breathing masks and tubing (adult and child)• 1 MTM resuscitation mask with oxygen inlet port and tubing in a hard case• 1 cylinder key for key type pin index cylinder valves

The Portable Oxygen Inhaler is packed ready for usein a rectangular case with carry handles, shoulderstrap and storage pockets as standard. Other bags orcases are available, please ask for details.

* Can be tailored to your requirements with a varietyof Therapy Regulators available.

A lightweight, easy to use Oxygen Resuscitation Kit,incorporating the Oxylator® FR300 Automatic OxygenResuscitator with 1.5 metre oxygen hose assembly.Supplied with a pin index oxygen regulator, oxygencylinder, resuscitation masks and disposables, packed ina robust water-resistant bag with carry handles andshoulder straps. Designed to be mounted on wall orbulkhead in a strategic position. A purpose mademounting bracket is supplied with each kit.

Also included in the Oxylator® FR300 Resuscitation Kit:

• 1 2.0 litre WC x 200 bar aluminium oxygen cylinder with pin index cylinder valve as standard, other cylinder options are available• Fully automatic Defibrillator• Child and Adult Defibrillator Pads• Ready Pack (razors and scissors)• Child and Adult Therapy Masks• Pack of Airways (sizes 1,2,3, & 4)• Hand-held Manual Suction Unit• First Aid, Burns, Extraction Kit and Immobilisation Devices can be included in the kit

Emergency Response Kit Complete

Oxylator® FR300 Resuscitation Kit

Product Code: 00730005

Oxylator® FR300 Resuscitation Kit



Portable OxygenResuscitation Kit

All Portable Oxygen Inhalers are supplied with achoice of oxygen cylinders and five different regulators packed in a rectangular case with carryhandles, shoulder strap and storage pockets.

Also included in the Portable Oxygen Inhaler Kit:

• 2 disposable therapy non-re-breathing masks and tubing (adult and child)• 1 MTM resuscitation mask with oxygen inlet port and tubing in a hard case• 1 cylinder key for key type pin index cylinder valves

The Portable Oxygen Inhaler is packed ready for usein a rectangular case with carry handles, shoulderstrap and storage pockets as standard. Other bags orcases are available, please ask for details.

Fire Marshall Bag Complete

High visibility bag containing the essential equipment required by an appointed Fire Marshall orDesignated Person whose role is to assist and guidepersonnel and customers to safety in the event of afire or other emergency.

The kit is designed to be mounted on the wall in astrategic position. A purpose built mounting bracketis supplied with each kit along with a pair of shoulderstraps. The contents of the kit can be tailored to suitthe client’s requirements.

* All parts/consumables for Kits and Bags soldas individual items.




Technical specifications

Cardiac Science is a global leader in automated external defibrillators (AEDs)and diagnostic cardiac monitoring devices. With the Powerheart G5, we’vetaken AED technology and design to a new level of reliability, ease of use, andeffectiveness. No other AED offers the Powerheart G5’s combination of advanced features that include Rescue Ready self-testing, variable escalatingenergy, fast shock times, and real-time CPR feedback.

Powerheart AED G5 Automatic

Operations Fully automatic and semi-automatic versionsWaveform STAR® biphasic truncated exponentialTherapy range (J) 95J to 354J (adult)Factory default (nominal) Escalating Variable Energy (VE): 200VE, 200VE, 300VEShock delivery Within 10 seconds (typically) post-CPRVoice prompts RescueCoach™ prompts provide user-paced instructionText screen Displays rescue prompts and critical rescue informationAudible alerts Voice prompt, system alertSynchronized shock Built-in automatic synchronization featurePacemaker pulse detection YesPediatric capability Yes, therapy range (VE) 22J to 82J, pediatric promptsDual language Yes, selected languages availableCustomisable Voice prompt, CPR settings, and shock protocols via AED ManagerCPR feedback Real-time guidance for CPR rate/depth (optional), metronome for CPR rateVisible indicators Rescue Ready®, battery, service, and pad statusWarranty 7 years

Dimensions (L x W x D) 30 cm x 23 cm x 9 cm (11.8 in x 9.1 in x 3.5 in)Weight 2.5 kg (5.5 lbs), including battery and padsDust/Water resistance IP55 (IEC 60529)Operating temperature 0°C to +50°C (32°F to +122°F)Altitude -382 m (-1,253 ft) to 4,594 m (15,073 ft)Drop MIL-STD-810G, 516.6 (Procedure IV) for 1.22 m dropShocks MIL-STD-810G, 516.6 (Procedure 1)Vibration (sine and random) MIL-STD-810G, 514.6 (Procedure 1, Cat 24)EMI (radiated/immunity) IEC 60601-2-4

Type Disposable, non-polarized (pads can be placed in either position)Shelf life 2 years

Guarantee 4-year, full operational replacementCapacity 500 shocks at 150VE ; 450 shocks at 200VEREADYRESCUE

Daily, weekly, and monthly Battery, pads (presence and function), electrical circuitry, and softwareWeekly Includes partial energy chargeMonthly Includes full energy charge cycle

Internal memory 90 minutes of rescue data, multiple rescue functionalityECG and rescue review Viewable via AED Manager softwareCommunications USB cable or USB drive

Each AED package includes (1) defibrillator, (1) Intellisense battery, (1) pair of defibrillation pads, (1) AEDManager software, (1) AED manual, (1) Getting Started card, and (1) Steps to a Rescue.

Defibrillator

Automatic self-tests

Physical/Environmental

Pads

Battery Intellisense® lithium battery

Event Documentation

Worldwide Marine and Offshore ServicesWorldwide Marine and Offshore Services


BENEFITS KEYOBAL A

ODOURLESSTURE BETWEEN 0°C AND 95°CTEMPERATANYTTIVE ATEFFEC

NON CORROSXICOBEING NON-TTWHILSAINABLE TPOWERFUL AND SUS

REDUCED DOWTSRESULTTSAWITH FTIONSAWIDE RANGE OF APPLIC

A BETTER FUNALS VAOBAL APPROGLGLYYCKED UP BCKED UP BBABAYYCCAAVEN EFFICVEN EFFICPROPRO

TELESSSATOURLESS ANDCOL

TSSED MAINTENANCE COSSIVE = DECREA

EXPERIENCETVED GUESWNTIME AND IMPRO

ORINE O CHLTTIVETERNATIONING ALTNC

YEAR SHELF LIFE2

YO APPLYTYSTILE AND EAATVERS

TURE BETWEEN 0°C ATEMPERA ANYTTIVE AEFFEC

TURARATTEMPATHWIDE RANGE OF BOTIVE IN ACA

GXYTER AND OAWAYO USER FRIENDLYTDEGRADES

TELESSSATAOURLESS AND ODOURLESS, COLAND 95°C

RE AND PH

GEN

businesses around the globe.ectaic, multi-application, disinfxtrusted, non-to

oodditionally it is fEuroNorm (EN) standards. Aactured in compliance withEndoSan™ is manuf

estock anor livving to be the first choice fant that is proed. EndvA approA and EPCCP compliant, FDe, HAod saf

ISO:9001, 14001 and 13485 standards and its efficacy i

arming nd fdoSan™ is a

en to vis pro

NEXT GENERATION ECOLOGICAL INFECTION CONTROL & BIOFILM REMOVAL FOR THE CRUISE INDUSTRY

• DRINKING WATER DISINFECTION.• LEGIONELLA CONTROL.• SPA & SWIMMING POOL DISINFECTION.• CABIN INFECTION CONTROL.• FACILITIES & EQUIPMENT DISINFECTION.• WASTE WATER MANAGEMENT.• FOOD PREPARATION.• BEVERAGE LINE DISINFECTION.

ALCOHOL &

FREECHLORINE

100%

ENDOSAN KEY GLOBAL APPROVALS

Star InternationalPentre Industrial Estate, Chester Road, Sandycroft. Flintshire CH5 2DQ United Kingdom

Tel: +44 (0) 1244 504500 (10 lines)Fax: +44 (0) 1244 504509

Email: [email protected]

Please send all your enquiries to the above UK Head Office.

Some of the popular products and services we offer

Worldwide Marine and Offshore Services

• Welding Gases• Plasma Cutters• Gas Welding Equipment • Arc Welding Equipment• Marine Chemicals• Water Treatment Test Kits• Fuel Oil Test Kits• Reagents• Biological Products• Disposable Span Gases• Ballast and Fresh Water Treatments

• Medical Equipment (All types of Oxygen cylinders)• Fire Equipment (Service & Supply)• Lifejacket (Service & Supply) • Liferaft (Service, Exchange & Supply)• Multi Gas Detectors (Supply & Service)• Refrigeration Services / Spares • Rescue Boats and Lifeboats• Refrigerant Gases• Immersion Suit (Service & Supply)• Star EndoSan• Den-Sin U.H.P Washers

Documents

New Dec 2015 STAR Fourth Edition catalogue