lindab | business area ventilation

New functions and tools

in CADvent 6.1

lindab | business area ventilation

New End-User License Agreement

New End-User License agreement (EULA), covering network

licenses, free licenses for DIMcomfort and DIMsilencer and

general updates.

lindab | business area ventilation

Improved Uninstallation routines

If you install a newer version of CADvent,

the older will be removed automatically

lindab | business area ventilation

Ready for AutoCAD 2011 and Windows 7

CADvent is now available for AutoCAD 2011 products and Windows 7 !

Patch is also supported from this version forward.

lindab | business area ventilation

Units Manager in DashBoard

The Unit Manager has been moved into the CADvent DashBoard,

settings tab.

lindab | business area ventilation

Shut Off 2D representation

We attached a button to shut off/on the simplified 2D

representation in Visual Style “2D Wireframe” in AutoCAD

lindab | business area ventilation

Edit a diffuser or rectangular product

Reopen and edit the information on diffusers in Comfort Express

and for rectangular products.

lindab | business area ventilation

Install on several AutoCAD at the same time

lindab | business area ventilation

Improved Smart Adjust on Grip points

The Smart Adjust

command has been

improved. As long as

the objects are

connected you can

mark either component

and double-click on the

Grip point for the not

fitting connection. The

connected object will be

adjusted using Smart

Move. In the example it

is shown by clicking

either on the reducer

(top) or the connector

(bottom).

lindab | business area ventilation

Consolidation for Ventiduct (VSR)

The maximum length according to

size and flow pattern are now

integrated into the dialogue, as well as

a consolidation in standard length and

NPU and ESU as endcap on the Bill-

of-Materials.

lindab | business area ventilation

Lindab MBB boxes

Lindab’s MBB boxes are now available in CADvent. When calculating them the

balance report gives you the k-value which is similar to the adjustment

position.

lindab | business area ventilation

Connect straight with flexible ducts

In CADvent 6.0 we

improved the connection

assistant to a more

“manual” behavior so the

user could click

anywhere and CADvent

tried to connect

according to the users

demands. Then it was

difficult to connect

flexible duct straight.

Now you have a setting

in the Preferences of the

Continue From

command to select.

lindab | business area ventilation

Install on several AutoCAD at the same time

In CADvent 6.0 we

introduced an advanced

editing style for the CCT

files.

Now it’s possible to

select a separate Color

Template to the Layer

Template through the

Project Settings.

lindab | business area ventilation

New analyzer as Dashboard with support for 64-bits

The new analyzer has similar docking and hiding

functions as the other CADvent Dashboards and tabs for

airflow and pressure drop and the different sound values.

If you click the on top of a column you can sort up- and

downwards after this column (Only ACAD 2007 forward).

lindab | business area ventilation

Also designed as Dashboard we have a function called

“Modelchecker” to search the drawing for clashes, Bad

connections, open ends, sound problems on diffusers and hole

extrusions (AutoCAD Architecture objects). Double-click on an

issue and CADvent will move the problem into focus and mark

it (Only ACAD 2007 forward).

New function to check problems in drawings