New HollandRolabar® Rakes57 256 258 260 252 216

Pick up more of yourvaluable hay

New Holland Rolabar® rakes let youfeed cleaner hay and more of it. Offsetwheels are set close to the basket, sotines follow the ground contourclosely to pick up all the hay. . .but leave dirt behind.

Hydraulic drive optiongives you more control

Hydraulic drive is available onModel 258 and Model 260 rakes to letyou tailor your basket speed to cropconditions, regardless of tractorground speed. That means you canrake slowly through heavy crops, yetset your basket speed fast enough tomove crop into uniform windrows.And, hydraulic rakes require less

maintenance and have a longer lifesince there are fewer moving parts. Inaddition, a hydraulic relief valveprotects the rake should it strike anobstruction.

No matter which Rolabar rakemodel you choose, you can besure you're making a solidinvestment. Demand theperformance of the original—the New Holland Rolabar rake.

2

SPECIFICATIONS Model 57 Model 256 Model 258 Model 260

Raking width 8'6" (2591 mm) 8’6” (2591 mm) 9’6” (2896 mm) 9’6” (2896 mm)

Width overall 10'3" (3124 mm) 10'3" (3124 mm) 11' (3353 mm) 11' (3353 mm)

Height overall 3'4" (1016 mm) 4'4" (1321 mm) 4'4" (1321 mm) 4'4" (1321 mm)

Length overall 6'5" (1956 mm) 10'1" (3073 mm) 10'1" (3073 mm) 10'1" (3073 mm)

Wheel Tread 5'5" (1651 mm) 5'6" (1676 mm) 5'6" (1676 mm) 5'6" (1676 mm)

Transport Speed Tractor Speed 20 mph (32 km/h) 20 mph (32 km/h) 20 mph (32 km/h)

Operating Speed 2 to 8 mph 2 to 7 mph 2 to 7 mph 2 to 7 mph

(3 to 13 km/h) (3 to 11 km/h) (3 to 11 km/h) (3 to 11 km/h)

...On hydraulic models-2 to 10 mph (3 to 16 km/h)...

Weight, approx. 777 lbs. (352 kg) 790 lbs. (358 kg) 850 lbs. (386 kg) 885 lbs. (401 kg)less tires less tires less tires

Main frame 3" (76 mm) ............4" (102 mm) channel, cross-braced with heavy tubular members............channel, cross-braced withheavy tubular members

Basket _________ .........................................One piece; welded heavy steel angle.........................................

Gearbox(ground drive) None Heat-treated gears and clutch running in grease on tapered roller bearings

Drive Housing Special accuracy None None None

shaft running on

tapered roller bearings

Tine bars ...........................5, standard high carbon........................... ...........................5, extra-heavy high carbon..........................

Tines .........................................................Steel or rubber-mounted...................................................... Rubber-mounted

Only rubber-mounted available on hydraulic models

Number of tines 90 90 100 or 155 100 or 155

Tine Bar Bearings Single ball bearing Single ball bearing Double ball bearing Double ball bearing

Drive PTO Ground Ground or hydraulic Ground or hydraulic

Delivery Left-hand Left-hand Left-hand Right-hand

COMPLETING PACKAGES AND OPTIONS:

Hitch and jack

Dolly wheels

5.00 x 15 wheels/tires

27 x 9.50-15 Rib implement tires

15” wheels only

Flow control kit for single hydraulic rake

Dual wheel attachment

Stripper bar support

Wide tire adapter

Safety chain and hardware

Tine bar bearings can be replacedquickly without removing the tinebar from the rake. Single ballbearings on Models 57 and 256, anddouble ball bearings on Models 258and 260 provide long life and lowmaintenance.

In-line telescoping drive transferspower from the wheels to the reelthrough heat-treated gears. The

universal joints are built to takesevere punishment, requiring onlyminimum lubrication and attention.Both wheels drive, assuring uniformwindrows on both right and leftturns (ground-drive models).

Offset wheels are set close to thebasket, so the tines closely followthe ground for cleaner raking andmore hay.

Height-adjustment cranks permityou to raise or lower either side ofthe basket independently for properground clearance. Crank arm locksprevent arms from changing positionover rough terrain.

Trip lever for gearbox clutch canbe engaged from the tractor seat. Thepositive gearbox lockout preventsclutch engagement during transport.thereís no need to disconnect thedrive each time you tow the rake(ground-drive models).

Proven basket suspensionprovides a full range of settings.Move the ball to the top position,and tines tilt forward for fluffy,fast-drying windrows. Move theball down and tines tilt rearwardfor when conditions require tightwindrows.

4

5

6

1

23

4

5 6

1

2

3

4

Dual rakingsaves you time

Using two rakes instead of onecuts man-hours, fuel consumptionand tractor time in half, doublingyour productivity.

Model 252 pivot-tongue rake hitch

The Model 252 lets you transport,operate and adjust two Rolabarrakes without leaving your tractorseat. Just let your tractor’s remotehydraulics do the work. The“252”gives you the flexibility to raketwo separate windrows, or you cancombine two swaths or windrows intoone giant windrow. This versatilitycomes in handy, especially if thedensity of your hay cutting varies.You can use the Model 252 with allNew Holland 8 1/2- or 9 1/2- foot rakes,ground-drive or hydraulic-drive,right- or left-hand delivery, or incombination. And, there’s no need fordolly wheels, since the rakes hookdirectly to the rake hitch.

V-tandem rake hitch

For heavy-duty teamwork withground drive rakes, hook a left-handdelivery Model 258 and a right-handdelivery Model 260 together with theV-tandem rake hitch. You’ll rake twowindrows into one giant windrow.

Use the Model 252 to rake two swathsinto two separate windrows. V-tandem rake hitch

The Model 252 rake hitch has a narrow 8’11” transport width.

5

SPECIFICATIONS-RAKE HITCHES

MODEL 252 PIVOT-TONGUE V-TANDEMRAKE HITCH HITCH

Weight 735 lbs. (333 kg) with wheels 300 lbs. (136 kg)

Length 17'5" (5305 mm) 6'10" (2083 mm)

Maximum operating width 24' (7310 mm) 24' (7310 mm)(with two 9 1/2-foot rakes)

Transport width 8'11" (2716 mm) 9'9" (2972 mm)

Hitch Clevis type Clevis type

Frame Rectangular steel tubing Tubular steel and formed channel

Rake Models Two “256” rakes One “258” and one “260”Two “258” rakes Ground driveOne “258” and one “260” rakeGround or hydraulic drive

6

Rake 27 feet in one pass

The Model 216 unitized rake isdesigned for big-acreage haymaking.Its unitized frame carries two 10 1/2-foot baskets that extend wide enoughto rake 27 feet in one pass—wideenough to combine two windrowsfrom 16-foot windrowers. Yet theModel 216 folds to a narrow 10-footwidth for easy transporting. You canalso use the 216 to turn or flip16-foot windrows for faster drying.

Easy operation

Operating the 216 is especiallyeasy since you primarily use yourtractor controls. A rake control boxlets you select the raking function.Then you use your tractor selectorvalve to activate that function.

Hydraulics allow you to raise andlower the baskets and control basketwidth and angle. You can also easilyadjust basket speed to match yourneeds. Changing from field to

transport position is easy, too. Use thehydraulics to shift the baskets to theirtransport position, and the swingframe folds as you move the tractorforward. You just raise the basketsand go. There’s no need to leave yourtractor seat. And, when you get to thenext field, your previous basket angleand width settings are repeatedautomatically! The 216 saves you timeand hassle.

SPECIFICATIONS -- MODEL 216 UNITIZED RAKE

Overall height 5'4" (1626 mm) OPTIONS:

Overall width (transport) 10' (3045 mm) Front gauge wheel kit

Overall length (transport) 22'1" (6730 mm) Rear gauge wheel kit

Weight, approximate 3005 lbs. (1363 kg) High-density rubber

Raking width 120 tine package

-each basket 10'6" (3198 mm) Safety tow chain bundle

-maximum, both baskets Up to 27' (8223 mm) Safety chain hardware kit

Tire sizes 11L x 15 rib implement

Operating speed 2 to 10 mph (3 to 16 kph)

Transport speed 20 mph (32 kph)

Main frame Tubular steel construction

Basket One-piece, welded construction

Tines Rubber mounted, 220 standard,

340 optional

Tine bar bearings Double ball

Tine ground clearance 8" to 11" (203 to 279 mm)

Tractor requirement 9 gpm hydraulic flow with 2000 psi

relief, four remote outlets,double circuit

A convenient flow control valve lets you adjust reel speed to matchcrop conditions and ground speed.

Shutoff valves on each basket lift cylinderprovide the option of locking both baskets inthe ”up“ position for transport and easyhookup. One basket may be locked up whenraking a single windrow.

Unitized frameconstruction maintains aconstant windrow width even

in sharp turns.

Easy-to-set frame andbasket limit stops let yourepeat your last chosen framesetting each time you open

the rake.

Four-point suspensionsystem with double top linkscan be adjusted to change thetilt of the basket assembly.Shortening the length of thebasket upper link tilts thetines forward for loose, fast-drying windrows. Increasingthe length tilts the tinesrearward for tighter windrowswhen weather conditions

require it.

Stripper bar supportsreduce the possibility of tinebreakage by maintainingstripper bar and tine

alignment.

Hydraulic motorsmounted on the end of each

reel drive the baskets.

Superior basket suspen-sion permits tines to lift overobstacles for cleaner rakingand less tine failure; strongerlower links and a reinforced

frame increase durability.

Rubber Dyna-tinesprovide long life. They aremounted individually and canbe replaced easily andeconomically. An additional120 tines can be added formore sweeping and

cleaning action.

Rake tine bars aremounted to spider assemblieswith two sealed ball bearingsat each end for hassle-free

servicing.

Swing arms arereinforced at the pivot pointfor added durability.

34

5

8

1

2

3

4

5

6

7

8

9

1

8

2

9

6

7

Safety begins with a thorough understanding ofthe equipment. Always make sure you and

your operators read the Operator’s Manualbefore using the equipment. Pay close

attention to all safety and operatingdecals and never operate machinery

without all shields, protective devicesand structures in place.

Visit our Web site at www.newholland.com/na Or, call toll-free: 1-888-290-7377

NH31005760• 030715 • API • PRINTED IN U.S.A.

Design, materials and/or specifications are subject tochange without notice and without liability therefor.Specifications are applicable to units sold in Canada, theUnited States, its territories and possessions, and mayvary outside these areas.

© 2007 CNH America LLCNew Holland is a registered trademark of CNH AmericaLLC.

Globally, we’re a valued leader in inno-vative agricultural and construction equip-ment and a wide range of financial services.

Locally, we’re your trusted New Hollanddealer — the specialist at the blue andwhite sign who’s always there with theequipment, parts, service and financingyou and your operation need.

Together, we’re working to deliverthe best value in today’s dynamic worldeconomy.

With productive equipment. Youwon’t find a more complete and modernline of tractors, haytools, combines andcrop production equipment — with awider selection of models offering the latestperformance, convenience and comfortfeatures — than at your New Hollanddealer.

With quality parts and service. Turn toyour New Holland dealer after the

sale for expert, factory-trainedservice and genuine NewHolland-branded parts tokeep you workingproductively.After all, you’ve placed your

confidence in the bestequipment , and you deserve the finestsupport — whether at the service counter orin the field.

With financing solutions. YourNew Holland dealer can tell you about smartways to maximize cash flow, preserve work-ing capital and protect what’s important.

With a portfolio of innovative financialservicesavailablethrough CNH Capital, like customizedfinancing, leasing, insurance, and thepurchasing convenience of a CommercialRevolving Account, your New Holland

dealer can turn your financial challenges intoopportunities. You name it — equipment,parts and service, financing, or just trusted,honest advice on farming and finance —you’ll find it all at the blue and white sign.Around the world, or right down the road,we’re the company you can always turn to.

YOUR NEW HOLLAND DEALER

You’ll find it at theblue and white sign.

We are proud to support the FFA.