New hydraulic 24V swing-leaf gates operator

S450HFAAC International Workshop 2009

Rimini, Italy

September 2009 by SAT

New FAAC swing-leaf gates hydraulic 24V operator: S450H

September 2009 by SAT

Summary Plus Technical specifications

September 2009 by SAT

Plus - 1/2

technology

Easy to install

For single-leaf up to 2 m for CBAC version or 3 m for SB version (with electrical lock)

New SB flange

New positive stop for opening and closing

1

2

3

4

5

September 2009 by SAT

6

7

8

Faster rod linear speed, respect “old” hydraulic operator

New tank without breath

New Encoder bus in the equipment

Plus - 2/2

September 2009 by SAT

1 Hybrid technologyHydraulic technology + low voltage (24 v)

The hybrid technology combines the advantages of both technologies:

- Hydraulic technology : Torque, resistance, long life and duty cycle;

- 24 V technology : high frequency use, easy speed and force control, backup battery unit

September 2009 by SAT

Long strokeOperator 402 = 240 mmOperator 422 = 240 mm Operator 400 = 260 mm

2 Easy to install - 1/5

September 2009 by SAT

Increased flexibility in the installation dimensions thanks to the very long stroke

2 Easy to install - 2/5Multi-position rear bracketThe S450H operator includes multi-position bracket (three positions), that allows the operator to be installed in a wide range of pillar dimensions.The multi-position bracket can be welded or fixed by screws.

September 2009 by SAT

2 Easy to install - 3/5

D and B quotesThe hole to be used depends on the D dimension, B dimension and opening angle.

September 2009 by SAT

2 Easy to install - 4/5D and B quotes

September 2009 by SAT

2 Easy to install - 5/5

Front bracketThe front bracket can be welded or fixed by screws

September 2009 by SAT

3 Max leaf length CBAC: 2 m SB: 3 m (with electrical lock)

September 2009 by SAT

4 NEW SB flange

September 2009 by SAT

Easy manual open/close

The operator is free to be moved manually without having to be released.The new system realizes a “real” reversible operator: the force required for manual operation is very low.

PATENTED

4 NEW SB flange – operator at rest

September 2009 by SAT

PATENTED

Controlled suction valve

Suction valve

PISTON

4 NEW SB flange – operator in closing

September 2009 by SAT

PATENTED

Controlled suction valve

Suction valve

4 NEW SB flange – operator in opening

September 2009 by SAT

PATENTED

Controlled suction valve

Suction valve

5 Positive stop11 spacers supplied for opening stop

Each spacer is wide 6 mm

September 2009 by SAT

stops

6 Faster piston rod2,5 cm/sec with E1242,0 cm/sec with E024S

Operator 400 from 0.75 to 1.5 Cm/sec

Operator 422From 1 to 1.3 Cm/Sec (2

Cm/sec PED.)

Operator 402From 1 to 1.3 Cm/sec

September 2009 by SAT

8 Encoder busCover for additional protection and design

Absolute encoder with very high resolution : < 0,1°

September 2009 by SAT

Technical specifications S450H

September 2009 by SAT