Upload
jaqueline-dodds
View
219
Download
1
Tags:
Embed Size (px)
Citation preview
New Method Steel Stamps, Inc. is the world leader in
manufacturing Automatic Roll Marking Attachments for OD and
End Face marking
The Best Way to Mark
• All New Method automatic roll marking attachments, whether designed for use in OD or END-FACE marking, eliminate secondary marking operations, for they are engineered to work as an integral part of the machine - advancing, marking the part and clearing it during the machine cycle. Avoid extra tooling and setup time as well as production time.
• Secondary marking operations of parts are costly.
• The most economical and efficient way to identify products is to do it prior to, or during the manufacturing cycle automatically, making it a primary operation.
Automatic AttachmentsPART BREAKDOWN AVAILABLE UPON REQUEST
CNC Turning Centers
Available in Outside Die Mount or Throated Die Mount
End Face Marking Tools
Automatic AttachmentsPART BREAKDOWN AVAILABLE UPON REQUEST
National Acme Tooling
604-1
620
705
New Britain Tooling
602-1
Automatic Attachments PART BREAKDOWN AVAILABLE UPON REQUEST
Greenlee Tooling Tooling for Swiss
Machines (including Citizen, Nakamora, Schutte,
Star and Tornos) are available.
New Method also makes Custom Tooling upon
request.
541 Interchangeable Type Retainer
Used on all Roll Marking Attachments that use the following Power Paks: 550, 560, 570, 580, 583, 588
541 Retainer accepts the following type sizes: 1/16", 3/64", 3/32", 1/8", 5/32", 5/64", 3/16"
For characters to be top-to-collet use 1035 as starting cam. For bottom-to-collet use 1034 as starting cam.
Note: The starting cam must use the dowel pins supplied. Failure to do so will result in damage to the type.
544 Interchangeable Type Retainer
Used on all Roll Marking Attachments that use the following Power Paks: 571, 578, 584, 585.
The 544 Interchangeable Type Retainer accepts the following type sizes: 3/64", 1/16", 5/64", 3/32", 1/8".
Roll Die Order Worksheet
Roll Marking Die Samples
Bar stock marking means marking the full bar length of hex, round or square stock before machining parts from the bar in a Screw Machine or Turning Center. Typical parts include fittings, spud orifices, and flow controllers. Bars can be marked on 1,2,3,4,5, or 6 sides either while being straightened or from coil or after cutting to bar lengths.
Bar Marking Machines
6000 Bar Marking Machine• Manual load, with auto feed at 2-feet per second• Handles Hex & Square stock from ½ to 2 in.• Interchangeable Bar Marking Dies made to your
specification• Adjustable marking depths• Eliminates wasted floor space
New Method Bar Marking Model 6400
Secondary Marking Machines
Custom Marking Machines
Pneumatic & Manual Marking Presses
Manual Marking Options
Contact Information
Charles D. L. BrownPresident
Email – [email protected]
Quotes, sales, customer service, technical issues
Kellee M. WarrenOffice Manager
Email – [email protected]
Quotes, sales, billing inquires
Office Phone +1 (586) 293-0200
Toll Free +1 (800)-582-0199Office Fax +1 (586) 296-1900
Website – www.newmethod.com
Mailing Address:
P.O. Box 338
Fraser, MI 48026
Physical Address:
31313 Kendall
Fraser, MI 48026
Located approximately 10 miles north of Detroit, Michigan