Upload
prince395
View
224
Download
0
Embed Size (px)
Citation preview
7/28/2019 New Product Launching Decisious
1/79
PREFACE
This is the specialization project on astudy on new product development for Tata Nano
along with a comparative study between Tata Nano
and Maruti 800. The objective of this study is to gain
knowledge about how Tata brought this new product
i.e., Nano up to the development stage and finallygoing to launch it on 23rd of March.
The project was assigned by Dipti Mam
(co-coordinator) and Dwani Mam (assistant co-
ordinator).
During the project I researched on how
Tata developed Nano costing Rs 1 lakh and what will
be its effects. This study also includes comparison
between Tata Nano and Maruti800. A survey was also
done for understanding consumer buying pattern and
preferences.
Thus, this study is based on new
product development in marketing for Tata Nano.
1
7/28/2019 New Product Launching Decisious
2/79
ACKNOWLEDGEMENT
I am thankful to Indra Prasth Guru Govind
Singh University and Institute of Innovation in
Technology & Management, D-27,28, Janakpuri, New
Delhi who provided me with the opportunity for
carrying out the study.
I would also like to acknowledge my
sincere thanks to our co-ordinator Dipti Mam. Under
their valuable guidance, constant interest and
encouragement, who have devoted her ever-precious
time from their busy schedule and helped me in
completing the project. Her co-operation was not only
useful for this project but will be a constant source of
inspiration for me in the future.
I express gratitude to various facultymembers especially Sandeep Sir for his valuable
guidance which was a good learning experience in
order to make my efforts successful.
2
7/28/2019 New Product Launching Decisious
3/79
Special, continual assistance while
collecting the data was provided by the respondents. I
wish to acknowledge my special thanks to them for
their help and cooperation in order to complete this
project.
I am also thankful to those who have
helped me intellectually in preparation of this project
directly or indirectly.
I am deeply indebted to the various
sources of information from relevant sites from
internet and books which helped me a lot in my study
and helped me to learn a lot.
3
7/28/2019 New Product Launching Decisious
4/79
Table of contents:
Sr.
No. subject Pg. No
1 Objective of research 5
2 Methodology of research 6
3
Introduction to the subject new productdevelopment 7
4 Introduction to Tata Nano 19
5
Tata Nano and new productdevelopment 25
6 Some myths about Nano 44
7
Comparison between Nano and Maruti800 49
8 Data collection method 56
9 Analysis of data collection 60
10 Various charts 60
11 Some feedback about Nano 67
12 Conclusion 70
4
7/28/2019 New Product Launching Decisious
5/79
Research objectives
o To study about how a new product- Tata Nano
was developed based on marketing theory of
new product development.
o To study about what made possible for Tata to
develop and produce a car for just Rs. One lakh.
o To study the objectives and target customers of
Tatas one lakh car
o To study and compare between Tata Nano and
Maruti 800
o To study on customers buying behavior and
preferences and views about Tata Nano and
Maruti 800 by various methods of data collection.
5
7/28/2019 New Product Launching Decisious
6/79
RESEARCH METHODOLOGY
o Research methodology deals with the various
methods of research. The purpose of the research
methodology is to describe the research
procedure used in the research.
o Research methodology helps in carrying out the
project report in by analyzing the various
research findings collected through the data
collection methods.
6
7/28/2019 New Product Launching Decisious
7/79
Introduction To New Product
Development
Meaning Of Product:
E.g.:- milk, computer, shoes, service after
sales, railway services etc. a product can be divided into
two categories
o Tangible goods
o Intangible goods
Tangible products are known as goods that
can be touched, felt and seen. E.g.:- computer, mobile
phone etc
Intangible products are known as services
that cannot be touched and seen as the customer can
feel and experience only after utilizing it. E.g.:- service
after sales
7
7/28/2019 New Product Launching Decisious
8/79
New Product Development:
A product can be considered new under the
following situations:-
New-to-the-world products
New product lines
Additions to existing product lines
Improvements and revisions of existing
products
Repositioning
Cost reductions
8
7/28/2019 New Product Launching Decisious
9/79
Stages Of New Product Development
Before the introduction of a product
into the market, it goes through several stages of
development. These stages are known as stages of new
product development. It includes the following:
Idea Generation:
Companies seek new ideas to enhance the
performance of the existing products and to innovate
new ideas. This stage is called idea generation stage.
There are many sources for idea generation. It may be
from customers, dealers etc.
Employees throughout the company
can also be a source of idea. Toyota claims that its
employees submit two million ideas annually over 85% of
which are implemented.
9
7/28/2019 New Product Launching Decisious
10/79
Companies also find good ideas by
researching competitors products and services. They
can find out what the customers like or dislike about their
competitors products. Ideas can also come from
investors. External research, surveys industrial
publications research and development etc.
But the main source of idea generation
is the customers by their grievances and complains and
feedback. However, although ideas can flow from many
sources, it is not feasible to implement all the ideas
generated due to lack of time and capital.
Idea Screening
The main purpose of idea generation is to
collect a larger number of ideas. However, not all ideas
can be commercially viable. Therefore, the companies
filter the less viable ideas with the help of systematic
process. Companies can use various parameters to
screen the ideas such as market size, technical
capabilities, potential competition etc.
10
7/28/2019 New Product Launching Decisious
11/79
Addressing the following issues will also
help the companies to analysis the attractiveness of
ideas.
Whether the product idea match the
existing products of the company.
The degree to which the new product
can cannibalize the sale of the existing
product.
Companys ability to produce and
market the product.
Buying behavior and the probable
changes in the environment.
While screening the ideas, an
organization may commit two types or errors.
Drop error where the firm rejects a very good idea.
11
7/28/2019 New Product Launching Decisious
12/79
Cro error where a company selects a poor idea.
Concept Testing And Development:
All ideas that survive in the process of
screening will be studied in details. They will be
developed into mature products. At this stage, the idea is
submitted for the external evaluation to get a feedback
from the market. It helps a firm are organization to
collect important information like customers initial
reactions towards the product development. During this
stage, new product idea is described in the form of one
or more benefit that is then presented to a sample of
potential customers for their reactions.
Marketing Strategy:
12
7/28/2019 New Product Launching Decisious
13/79
Following a successful concept test, the
new product manager will develop a preliminary strategy
plan for introducing new product in the market. The plan
consists of three parts.
The first part describes the target market size,
structure and behavior for the first few years.
The second part outlines the planned price
distribution strategy and marketing budget for the
1st year.
The third part of marketing strategy plan describes
the long run sales and profit goals and the marketing
mix strategy over time.
Business Analyses.
After management develops the product
concept and market strategy, it can evaluate the
business attractiveness. Business analyses are the first
in-depth financial evaluation of new product to be
developed. Here management needs to prepare sales
cost and profit projections to determine whether they
13
7/28/2019 New Product Launching Decisious
14/79
satisfy company objectives. If they do, then concept can
move to the development stage. SOWT analysis will be
conducted at this stage by the organization. It also
includes the following:
Total sales estimation:-
These are the sum of estimated first- time
sales, replacement sales and repeat sales. Its method
depends upon whether the product is one time
purchase(an engagement ring), an infrequently
purchased products like toaster, auto mobile etc. or afrequently purchased products like consumer and
industrial non durables.
Estimation costs and profits.
The R&D, manufacturing, marketing and
financial departments estimates the costs. The
profitability of the new product is estimated through
various financial tools. The simplest technique is the
breakeven analysis in which the management estimates
14
7/28/2019 New Product Launching Decisious
15/79
how many units of the product the company would have
to sell to break even with the given price and cost
structure. If the management believes that sales could
easily reach the break even number, it is likely to move
the project into development stage.
Product Development
In this stage, detailed technical
analysis is conducted to know whether the product
produced at costs is low enough to make the final price
attractive to the customer.
Here a working model or a prototype isdeveloped to disclose all tangible and intangible
attributes of the product. A product protocol is prepared
which is a detailed downiest containing the important
attributes that are expected in the product. Once the
protocol has been developed, it is handed over to the
research the development department to develop the
prototype of the product.
15
7/28/2019 New Product Launching Decisious
16/79
Test Marketing:
The test marketing is the stage wherethe product is introduced in a few selected cities. During
this stage, the company has to fate the following
expense:
High advertisement
High manufacturing cost.
High distribution cost etc.
For testing the product, marketer
needs to make the decision on the following issues.
The no. of cities in which the product is to be tested.
Geographic location of the cities.
Time to carry ort test marketing
16
7/28/2019 New Product Launching Decisious
17/79
Through this exercise, company can
know the customers response, feedback, suggestions,
complaints and any other changes required to be done
for product modification.
After successfully laughing the product
in selected cities the company launches the new product
in all other cities.
There are certain methods of product
testing.
Alpha Testing
In this method, a group of target audience
is selected from the employees of the company.
Beta Testing:
It is carried out at the customers site.
Generally, it is applicable for industrial products where
the customization takes place.
Gamma Testing:
17
7/28/2019 New Product Launching Decisious
18/79
It is carried out on a long term basis where
the customers uses the product extensively and gives
response after a long period of time. Say six months.
Commercialization:
The results of the test marketing help
marketers to decide the changes that are needed in the
marketing mix before entering into the market. It also
helps the marketer to decide the amount of production
distribution strategy, selling efforts and other issue like
providing guarantees, service after sales etc. the product
enters the market during the commercialization stage.
18
7/28/2019 New Product Launching Decisious
19/79
Introduction To Tata Motors:
o Tata Motors was established in 1945,
when the company began making
trains.
o It has its manufacturing base in
Jamshedpur, Lucknow, Pune and soon
one more plant is going to established
at Singur, West Bengal.
o Product Manufactured - Passenger
Cars and commercial vehicle
19
http://en.wikipedia.org/wiki/1945http://en.wikipedia.org/wiki/Trainhttp://en.wikipedia.org/wiki/Jamshedpurhttp://en.wikipedia.org/wiki/Lucknowhttp://en.wikipedia.org/wiki/Punehttp://en.wikipedia.org/wiki/Singurhttp://en.wikipedia.org/wiki/West_Bengalhttp://en.wikipedia.org/wiki/Commercial_vehiclehttp://en.wikipedia.org/wiki/1945http://en.wikipedia.org/wiki/Trainhttp://en.wikipedia.org/wiki/Jamshedpurhttp://en.wikipedia.org/wiki/Lucknowhttp://en.wikipedia.org/wiki/Punehttp://en.wikipedia.org/wiki/Singurhttp://en.wikipedia.org/wiki/West_Bengalhttp://en.wikipedia.org/wiki/Commercial_vehicle7/28/2019 New Product Launching Decisious
20/79
o Installed Capacity - 350,000-400,000
vehicles a year
o Investment - Rs 2,500 crore (Rs 25billion)
o Turnover - $21.9 billion (Rs 967,229
million)
o Employees - 2,46,000/22001
o Tata Motors had created the wealth
Rs. 320 billion during 2001-2006 and
stood among top 10 wealth creators in
India.
Tata Nano - ONE LAKH CAR
PROJECT Peoples Car
A promise is a promise, said Rattan
Tata, Chairman, Tata Motors, on 10th January, 2008,
when the Nano was first displayed at the Auto Show in
20
http://en.wikipedia.org/wiki/INRhttp://carwale.com/research/cars/tata/http://en.wikipedia.org/wiki/INRhttp://carwale.com/research/cars/tata/7/28/2019 New Product Launching Decisious
21/79
Delhi. The Nano project didnt grab the attention of
only Indians; the entire world had their eyes glued to
the worlds cheapest car.
A truly Peoples Car, this time is from
India. Though the dealer price is Rs. 1 lakh, the price on
road, when it will be launched, will reach around Rs.
1,25,00 but it will be still more affordable and will be
more eco-friendly than most other cars giving a
mileage of around 23km/liters. The price of the car is
such that a lot of rich and HNIs, if interested, can buy
the car just by a single swipe of their credit cards.
Providing a car worth rupees one lakh car
was the dream of the chairman of Tata motors Mr.
Rattan Tata. And with high qualified IT skills people he
has shown the Indian talents to whole the world.
Idea conceived by - Rattan
Tata
Cost of development - 1700
crores
21
7/28/2019 New Product Launching Decisious
22/79
Manufacturing cost
(excluding dealer margin and taxes)- Rs 65,000
per unit
Development of Design - India
Time for designing the car - 4 years
Team - A team of 150 engineers , everyone
below age 28
Biggest hurdle - To make a car cheap car
without Compromising design
May western countries as well as many foreign
countries have accepted Indian IT skills.
Details Of Nano
22
7/28/2019 New Product Launching Decisious
23/79
Specs:
Engine: 624 cc / 33 bhp
4 door, 5 seater (and yes 4 Wheeled too)
Rear Engine
Weight: 600 kgs
Mileage - 22-23 km/liter
Variants:
Standard
Deluxe (with AC)
Future:
Diesel Variant
Exports outside India or assembly plants outside
Comparison
8% less in length (bumper to bumper) with respect
to Maruti 800 21% more in inner space with
respect to Maruti 800
Looks:
Front side looks more like Matiz (or Spark as we
now call it)Back side looks more like India withthose long tail lights.
Insight:
People often criticize something that is making
23
7/28/2019 New Product Launching Decisious
24/79
waves everywhere. This has also been the case
with Tata Nano. Competitors, safety regulators,
environmentalists and most others conceived the
problems that India will face, when such a car is
available, much before the actual launch of the
car.
This will result into:
OLD GENERATION NEW GENERATION
24
7/28/2019 New Product Launching Decisious
25/79
25
http://bp1.blogger.com/_3XY-2tdsvwk/R4jzm7LMLbI/AAAAAAAAAl8/DkAAn9nI6Kc/s1600-h/tata+nano+car-1.jpg7/28/2019 New Product Launching Decisious
26/79
SOWT Analysis
STRENGTH
Brand name
TATA
Cost price low
Fuel efficient
Safe
OPPORTUNITI
ES
Large market
for selling
Awareness in
the market
First car in low
range
Can hit in global
market
WEAKNESS
Low power
Not a status symbol
Delay in manufacturing
Limited features
THREATS
Company rival
26
7/28/2019 New Product Launching Decisious
27/79
Not sure to hit in rural and semi-urban areas
27
7/28/2019 New Product Launching Decisious
28/79
New Product Development AndNano
As seen before, A product can be
considered new under the following situations:-
New-to-the-world products
New product lines
Additions to existing product lines
Improvements and revisions of existing
products
Repositioning
Cost reductions
As far as Nano is concerned, it falls into new
to the world products in the context that it has made a
history for the cheapest car ever made without
compromising on quality. I.e. best way value analysis.
7/28/2019 New Product Launching Decisious
29/79
It can also be considered as new product in
the since of cost reduction as its the first time in the
history that such a cheap car is produced.
The story of the Nano is not confined to its
impact on the auto industry. It's a tale that illuminates
the India of todayan eager, ambitious nation with a
combination of engineering talent, a desire for low costs
and value, and the hunger of young managers looking to
break from a hidebound corporate environment. Indeed,
the team that worked on the Nanoon average aged
between 25 and 30has helped to flatten Tata Motors'
stodgy, multilayered management structure, which has
resulted in an unexpected side-benefit called
"organizational innovation".
7/28/2019 New Product Launching Decisious
30/79
7/28/2019 New Product Launching Decisious
31/79
two-wheelers to four-wheelers," he says. "Today they
can't afford it."
More and more can, but Indian car buyers
today represent a tiny slice of a potentially giant market
India has just seven cars per 1,000 people. India's auto
industry has grown an average of 12% for the past
decade, but just 1.3 million passenger vehicles were sold
in India in the fiscal year ending March 2006. That means
a billion Indians buy about the same number of cars in a
year as 300 million Americans buy in a month.
If four wheels cost as little as two wheels,
that could change fast. About 7 million scooters and
motorcycles were sold in India last year, typically for
prices between 30,000 rupees and 70,000 rupees, about
$675 to $1,600. Tata is targeting a price of 100,000
rupees one lakh, in Indian terms of measurement or
about $2,500 at current exchange rates, for its small car.
7/28/2019 New Product Launching Decisious
32/79
That sounds impossibly cheap in the West but remains
three times higher than India's annual per capita income.
The average pay for factory workers at Tata Motors is
just $5,500 a year.
Idea screening
The next step was the screening of idea.
How is this dream possible? What should they make?
A scooter with two extra wheels at the back for
better stability?
An Auto-rickshaw with four wheels?
A three wheeled car like a closed auto- rickshaw??
A four wheeled car made of Engineering Plastics?
A Four wheeled rural car?
Rolled up Plastic curtains in place of windows?
Openings like Auto rickshaws from the side
A four wheeled open car with safety side bars?
7/28/2019 New Product Launching Decisious
33/79
But the market wanted a car and if they build a peoples
car it should be a car and not something that people
would say, Ah! Thats just a scooter with four wheels or
an auto-rickshaw with four wheels & not really a Car.
Trying to build a car cheap enough for
motorcycle buyers seems to make sense now but
seemed crazy several years ago when Rattan Tata,
longtime chairman of Tata Motors and scion of the
nation's giant Tata Group conglomerate, first mentioned
his dream of building a one-lakh car in 2003. "They are
still saying it can't be done," he says, insisting that it can
and will. "Everybody is talking of small cars as $5,000 or
$7,000. After we get done with it, there will hopefully be
a new definition of low-cost."
7/28/2019 New Product Launching Decisious
34/79
Concept Testing And Developing
Before starting the project, Wagh did
something no one at Tata Motors ever had: He talked to
customers. The three-wheeler men inevitably insisted on
a cheap, dependable truck that could go from village to
market carrying, say, a ton of onions or potatoes, one
night, as sunset approached, Wagh stuck with one
rickshaw driver. He says, "I kept asking the question.
Why? Why? Why do you want a four-wheeler?" Wagh
remembered. Finally, he got the real answer. It turned
7/28/2019 New Product Launching Decisious
35/79
out it wasn't really a problem of transportation of
vegetables If I had a four-wheeler, I would have better
marriage prospects in my village," the young man said.
Drivers of three-wheelers are looked down upon in India.
Wagh realized that four wheels had emotional, not just
practical, appeal.
Thus the new product was now to be developed.
But what type of product?
The car to cost Rs. 1 lakh on road.
The car should be built on a different platform than
conventional ones.
It must be meeting all the safety and regulatory
requirements.
7/28/2019 New Product Launching Decisious
36/79
It has to be built on a scale which shall be more than
double the earlier launches of similar products and
the ramp up must be smooth.
The car has to be designed so that it can be
exported to other countries as the domestic demand
may not materialize as per projections.
The car must be a beacon for the Indian Automobile
industry and prove to the world that we are capableto take any challenge and come out worthy winners.
That quest to build the world's cheapest car
hasn't ended. The Nano should be available this fall, but
the mission began back in 2003, when Rattan Tata,
chairman of Tata Motors and the $50 billion Tata
conglomerate, set a challenge to build a "people's car".
Tata gave an engineering team, led by 32-year-old star
engineer Garish Wagh, three requirements for the new
7/28/2019 New Product Launching Decisious
37/79
vehicle: It should be low-cost, adhere to regulatory
requirements, and achieve performance targets such as
fuel efficiency and acceleration capacity.
The design team initially came up with a
vehicle which had bars instead of doors and plastic flaps
to keep out the monsoon rains. It was closer to a
quadricycle than a car, and the first prototype, even a
bigger engine, which boosted the power by nearly 20 per
cent, was still dismal. "It was an embarrassment," says
Wagh.
But failure didnt stop them
they quickly realized it was necessary to bring everyone
on board, "else it leads to last-minute heartache and
delays". Every morning, he would spend an hour or two
on the floor of the Pune factory, insisting that everyone
involveddesigners, manufacturing teams, and vendor
7/28/2019 New Product Launching Decisious
38/79
development peoplebe there to accelerate decision-
making and problem-solving.
Over time, Wagh's team grew to comprise
some 500 engineers, an impractically large group to
gather on a daily basis. So instead, a core team of five
engineers gathered every day at three pm to discuss the
latest developments. Each engineer represented a
different part of the car: engine and transmission, body,
vehicle integration, safety and regulation, and industrial
design.
The body had to be changed because
Rattan Tata, over six feet tall himself, wanted it to be
easy for tall people to get in and out of the car. "Imagine
the plight of the body designerhe went through
hundreds of iterations, then at the last minute the car
length was increased by 100 millimeters!" Wagh says.
The attention to detail paid off: When the car rolled onto
the dais at the Auto Show in New Delhi in January, and
Rattan Tata stepped out of the driver's seat with ease, it
made an immediate impact.
7/28/2019 New Product Launching Decisious
39/79
What shook the automobile world most was
the fact that the designers seem to have done the
impossible: The sleek, sophisticated Nano doesn't look
flimsy or inexpensive. If it had been an upgraded scooter
on four wheels, Tata still would have been applauded for
making a family of four safer on Indian roads. The Nano,
however, affords both safety and status. "The innovation
wasn't in technology; it was in a mindset change".
Business Analysis
Cost
7/28/2019 New Product Launching Decisious
40/79
Since the car had to be built within a cost of
Rs. 1 Lac, no conventional design would work as the
costs shall be higher and so the entire car has to be
redesigned.
What makes Nano so less expensive can be
well understood from thefollowing diagram
The design has to question the need of
each and every component from the point of view of its
necessity of existence and also the minimum
http://bp1.blogger.com/_3XY-2tdsvwk/R4pf0bLMLlI/AAAAAAAAAnM/GQyNAYOeSLY/s1600-h/111tat+nano.jpg7/28/2019 New Product Launching Decisious
41/79
requirements of its functionality. Value Engineering
concepts have to be deployed to finalize the minimum
requirements.
Disruptive Technology:
Is a Technology that brings radical change
by introducing new ways of doing things usually at a
Technology that is:
Significantly cheaper than existing
Technology.
Is much higher performing?
Has greater functionality and
Is more convenient to Use.
Brings to market a totally different
Value proposition than the one
available and can change the Paradigm
about a product.
7/28/2019 New Product Launching Decisious
42/79
The Guiding factor was that the cost has to
be minimized for each component yet maintaining its
basic functionality.
The Alternatives are:
Reduce Consumption of Material being
used.
Alternate Suppliers to get same
material at fewer prices.
Use alternate materials.
Eliminate use of Material.
Eliminate a process Or a Combination
of the above.
The design was outsourced to Italy's
Institute of Development in Automotive Engineering, but
Tata himself ordered changes along the way. Most
recently he vetoed the design of the windshield wipers.
His solution: a single wiper instead of two, giving the car
a cleaner look.
THE COST REDUCTION PARADIGM Value Engineering
Alternatives:
7/28/2019 New Product Launching Decisious
43/79
The target was very clearly defined that
within the given cost structure of 1 Lac all the
components have to be allocated a maximum price and
the same had to be achieved using the available
alternatives.
The Guiding factor was that the tax
structure, on materials and manufacturing, must support
the final cost of Rs. 1 Lac
The Decisions were:
Establish factory in a tax free zone.
Get the tax advantages on
infrastructure development.
Get the suppliers to establish base near
the factory.
Get special concessions from State
Govt.
7/28/2019 New Product Launching Decisious
44/79
In short select a manufacturing location
where all the advantages could be
achieved.
In short select a manufacturing location
where all the advantages could be achieved.
Total sales estimation
Now the question was, how much to
produce
It was estimated that the demand for
the peoples car shall be at least twice
the demand for Maruti 800, the lowest
end car. Initial projections were at
about 500 K cars per year.
The basic reason was the conviction
that the target price shall redefine the
4 - wheeler segment.
7/28/2019 New Product Launching Decisious
45/79
The price decision of Rs 1 lakh is
definitely going to make a lot many
people transit to 4-wheeler fold and
that shall explode the demand.
F only 10% customers of 9 Million two
wheeler market transit to 4-wheelers it
shall amount to 50% of the passenger
car market share.
It was decided to set up plants with 5
lacs cars per annum capacity and ramp
the same up in stages, in line with
increase in market demand.
The initial response to the Nano has been
overwhelming and the tiny, Noddy-land car is expected
to help the company cross several milestones. With
revenues at Rs 1,29,994 crore for the financial year
2006-7, and group companies enjoying a market
capitalization of Rs 2,51,487 crore as on January 10,
2008, the Tata Group is on a strong footing, contributing
more than 3 per cent to India's GDP. Nano, being the
7/28/2019 New Product Launching Decisious
46/79
world's cheapest car, has made international players sit
up in amazement and the company has received
proposals from some African, Latin American and
Southeast Asian countries to manufacture the car there.
Product Development
And finally the product was developed with the
following features.
Engine Capacity Bosch 624 c.c. twin cylinder
Low capacity, Lighter, sufficient with better Power
Rear Engine to reduce the transmission length using
a balancer shaft.
4 Speed Manual Gear Box
7/28/2019 New Product Launching Decisious
47/79
All Aluminum Engine
Higher thermal conductivity than cast iron, Lighter
and so better mileage
Engine Management System by Bosch
Superb control over emission and smooth
acceleration.
Dimensions L: 3.1m, W: 1.5m, H: 1.6m
Less length but more inner cabin space due to
height. Comfortable leg room.
Independent Front & Rear Suspension McPherson
Strut in Front & Coil spring & trailing arm in rear.
Better ride than Maruti 800.
Single piece ribbed steel body with safety features
such as crumple zones, intrusion resistant doors,
seat belts, strong seats & anchorages.
Safety requirements are adequately met.
Single Wiper in place of two.
Cost effective yet functionality is met
7/28/2019 New Product Launching Decisious
48/79
Tube less Tires
Weight reduced by 2 Kg. Cost reductions 200 Rs.
And in line with modern vehicles
Instrument console in the centre
Elegant to look at and can be used both in Left Hand
& Right hand version.
The list goes on and on.
The Final verdict
THE CAR COSTS Rs 1 lac
Test Marketing And Commercialization
Nano is soon going to launch by the end of April. It
will be commercialized in whole of India. It is mostly
targeted to the middle class and lower middle class
people. The effects of Nano and its commercialization will
be soon known after it comes into the market.
7/28/2019 New Product Launching Decisious
49/79
Some myths about Nano
When Nano was introduced, it
surprised everyone. It had so many features but the cost
was as low as Rs. 1 lakh. This was really amazing. Due to
this, many competitors, governments and others
opposed Nano. Moreover, its not a new thing that
whenever a new concept is developed, people oppose.
They find more limitations then seeing the benefits.
Following are some myths about Nano. But these are
then proved to be wrong.
Myth no 1
Nano is an unsafe car
The car has an all steel body.
It meets the mandatory Frontal Impact
requirements.
It also meets the Side Impact requirements although
they are not mandatory in India.
7/28/2019 New Product Launching Decisious
50/79
Myth no 2
Nano will greatly increase the Pollution Level
The car is Bharat IV and Euro IV compliant although
these norms, which are stricter than the present
Bharat III norms, are yet to be introduced.
It has lower carbon footprint, 20 mg / Km of CarbonDioxide emission as compared to 45mg / Km,
emitted by most of the two wheelers.
Its Multi Port Fuel Injection system is controlled by
an intelligent Bosch Engine Management system
which controls the combustion cycle precisely to
ensure compliance to all emission norms.
Myth no 3
Nano will struggle to perform Although the car has 33 bops as the maximum
horsepower it has a low kerb weight of 550 Kg and
so has a higher power-to weight ratio when
compared to many existing cars running on Indian
roads.
The car has a matching acceleration to Maruti 800
and also a good top speed. Although the
7/28/2019 New Product Launching Decisious
51/79
manufacturers have estimated 90 Kms as the
maximum speed the car can go up to 105 Kms per
hour top speed.
Myth no 4
Nano has very little leg room
Although the car is 8% smaller than Maruti 800 it has
lot of extra leg room at front as there is no enginecompartment. This also leaves sufficient knee room
at the rear.
The car has a tall boy type design so there is lot of
head space and also enough Shoulder room.
The mono volume design and the wheels having
been put at the corners have freed up lot of in- cabin
space and although the car may be registered as a
four-setter, three slim adults can sit comfortably at
the rear.
Myth no 5
Cheap means Uncomfortable
More comfortable than some of the cars selling at
even twice the price. Leaves sufficient knee room at
the rear.
7/28/2019 New Product Launching Decisious
52/79
Easy to get in & out of the car because of perfect
seat height from the ground.
Suspension systems are good and the trailing arms
with coil springs are not found in cheap cars. Rear.
Myth no 6
Its very difficult for a rear - engine car towork.
Rear engines work in many cheap as well asexpensive cars.
Auto-rickshaws at one end and Formula One cars on
the other extreme all use rear engines.
Maruti Omni too has a rear engine, under the seat
and no one has been burnt due to that.
Cooling is easier in Nano as compared to some vans
and there are the air ducts on either side behind the
edge of the doors, which allow air to seep in for both
cooling & for intake.
Myth no 7
There is a shortage of storage space.
There is some storage space although not much.
The rear seat with parcel shelf folds to allow
accommodating a large suitcase.
7/28/2019 New Product Launching Decisious
53/79
Small articles can be placed under the bonnet also.
Myth no 8
Cutting Corners is evident everywhere
Cost cutting is done by smart designing rather thantaking out the essentials.
One wiper has been taken out but the functionality is
intact. Wind shield washer fluid jets are mounted on
the wiper itself rather than the body.
Wheels are held by three bolts instead of four.
On the contrary, MRF tubeless tyres and allAlumininium engine, have been used, which are
more expensive than conventional ones.
7/28/2019 New Product Launching Decisious
54/79
TATA NANO V/S MARUTI 800
Competitor
As we know the price of Nano car is muchaffordable for middle class people. This car can be easily
affordable by middle class people. In the Indian market it
will face only by one competitor that is Maruti 800,
which produced by Maruti udyog.
The real question arise who will have thelast laugh Tata or Maruti 800?
The answer is neither Tata nor Maruti 800
but they are the buyers who will have the last laugh
Can Nano beat the popularity of Maruti 800. All the things
depend on their marketing strategy that how they willattract to Indian middle class customers.
Never mind the fact that what was touted
as a Rs.100,000 car will cost at least a fifth more and
7/28/2019 New Product Launching Decisious
55/79
that's for the standard non-air conditioned version.
Jagdish Khattar, a former head of Maruti 800
manufacturer Maruti Udyog Ltd, says it's too early to say
whether the Nano will overtake the original.
"It's a good product but it's still too early to
say whether it will overtake the 800 because it caters to
a totally new market segment," he said while watching a
live telecast of Tata's press conference after unveiling of
the Nano. But clearly, at least one other manufacturer
was worried.
Whether or not the Nano will overtake the
Maruti 800, one thing is for sure: the current Auto Expo
will be remembered for Tata's people's car and for that
product alone. It is the Nano that has captured the
hearts and minds of a majority of the spectators.
Price of Maruti in major city of India 800 (a/c LPG)
(Figures in rupees)
Mumbai 245648
Delhi 228858
Bangalore 231407
Kolkata 236826
Lucknow 232542
7/28/2019 New Product Launching Decisious
56/79
TATA NANO V/S MARUTI 800
FEATURES OF TATA NANO COMPRAED TO MARUTI 800
COST:
The dealer price of Maruti 800 varies from city to city.
The dealer price in Delhi is 1.97 laths and the road
price is approximately 2.28 laky Indian rupees.
7/28/2019 New Product Launching Decisious
57/79
The dealer price of Nano is just 1.00 lakhs rupees and
the road price is only 1.26 lakhs rupees.
So here we can put the equation 2 * Nano = 1*Maruti 800
ENGINE:
Maruti 800: 800 cc
Tata Nano :623 cc (better fuel than Maruti 800)
ENGINE TYPE:
Maruti 800 petrol/LPG
Nano : petrol (diesel version will be later)
SEATING CAPACITY:
7/28/2019 New Product Launching Decisious
58/79
Maruti 800: 4+1 person
Nano: 4+1 person
FUEL TANK CAPACITY:
Maruti800 : 28 Lt (petrol), 19.2 (LPG)
Nano: 30 Lt.
WEIGHT
Maruti 800 more than 690 kg (gross weight is 1000
kg)
Nano more than 600 kg
TOP SPEED:
Maruti 800 : 120 km/hr
Nano : 90 km /hr
SEGMENT:
Maruti 800 middle class people
7/28/2019 New Product Launching Decisious
59/79
Nano: lower and middle class people.
FUEL CONSUMPTION:
Maruti 800: city 13.6 and highway 17.6 km
Nano: city 22 km and highway 26 km
DIMENSIONS:
Maruti 800 Tata NanoLength 3.335 meters
(131.3 inch
3.1 meters
Width 1.440 meters
(56.7 inch)
1.5 meters
Height (55.3 inches) 1.6 meters
BREAKS:
Maruti800: Front Disk, Rear Drum
Nano: Front Disk, Rear Drum
COLOURS
Maruti 800
7/28/2019 New Product Launching Decisious
60/79
Tata Nano:
7/28/2019 New Product Launching Decisious
61/79
The Nano are not much taller and broader
as compared to Maruti 800 but it has 21 percent
larger spaces in side but 8 percent short than Maruti.
Disadvantages of NANO vs. Maruti 800
1. LPG/CNG version is doubtful.
2. Top Speed will be laser than 800.
3. Space for Language is less.
7/28/2019 New Product Launching Decisious
62/79
Data Collection MethodsThe success of any project or market survey
depends heavily on the data collection and analysis. It is
necessary that the data collected is a reliable data in
order to achieve the research objective.
For research regarding the views of people
about Tata Nano and its comparison between Tata Nano
and Maruti 800 two types of data collection methods
were used
Primary Data
Secondary Data
PRIMARY DATA:
Primary data is the data, which are fresh
and collected for the first time, and are original in
character. There are various Primary Data Collection
techniques, which have helped in data gathering. This
was collected through questioner.
7/28/2019 New Product Launching Decisious
63/79
Questionnaires are a popular means of
collecting data, but are difficult to design and often
require many rewrites before an acceptable
questionnaire is produced.
Advantages:
Can be posted, e-mailed or faxed.
Wide geographic coverage.
Relatively cheap.
No prior arrangements are needed.
Avoids embarrassment on the part of
the respondent.
Respondent can consider responses.
No interviewer bias.
Disadvantages:
Design problems.
Questions have to be relatively simple.
7/28/2019 New Product Launching Decisious
64/79
Time delay whilst waiting for responses
to be returned.
Several reminders may be required.
Assumes no literacy problems.
No control over who completes it.
Not possible to give assistance if
required.
Problems with incomplete
questionnaires.
Points kept in mind while preparing thequestioner
Liberal spacing
Length of the questioner is kept normal
Logical Order
7/28/2019 New Product Launching Decisious
65/79
Question are short, simple and to the
point; all unnecessary words are
avoided
Close ended questions are asked so
that its easy for the respondent to fill
the questioner and also easy to
analysis
Sample population was selected on thebasis of random sampling method.
SECONDARY DATA:
Secondary data are those data, which have
been already collected or published for the purpose other
than specific research need at hand. This data is simply
used up by the researcher for his purpose of collected
data and its used for the same purpose. The secondary
data sources here in this project are:
Websites
7/28/2019 New Product Launching Decisious
66/79
Books
Various Results Of Analysis In The
Form Of Charts
7/28/2019 New Product Launching Decisious
67/79
% of people who are aware of tata
nano
yes
no
the % of people who are aware of the tatas
new product Nano car is shown with the help of pie
chart.
o Here, blue color indicates that people are aware of
tata Nano
o And red color indicates the % of people who are not
aware of tata Nano.
While analyzing the chart, we can know that
only 3% of the total sample population is not aware
about tata Nano. This shows the great effect of media,
newspaper and launching of this product.
7/28/2019 New Product Launching Decisious
68/79
7/28/2019 New Product Launching Decisious
69/79
this chart shows the preference of different
age group to buy tata nano when it is launched.
Here on x- axis, no of respondents is given.
And on y axis the age group is given.
o Blue triangle indicates willingness to purchase tata
Nano.
o Red triangle indicates that the respondent is not
willing to pruchase it
o And green indicates that the respondent is not sure.
While analysing this chart, we can see that
the young generation is egar to buy the product. While
7/28/2019 New Product Launching Decisious
70/79
due to some misunderstandings about tata nano, the
older generation doesnt desire to buy it or are not sure
about it.
7/28/2019 New Product Launching Decisious
71/79
Preferences Of The Respondents RegardingBuying Of Motor Car, Maruti 800 And TataNano
this chart shows the preference of the
respondent. The question asked in the questioner was, if
you were to buy one of the following, which would you
prefer. the options given were:
motor bike Maruti 800 tata Nano
by having a glance at the chart, we can seethat majority went for tata Nano. Maruti 800 got very less
votes. This shows a tough time for Maruti in future.
7/28/2019 New Product Launching Decisious
72/79
Views about success of Nano
the question asked here was,do you think
Nano will be successful the options given were
yes no not sure.
Its very interesting to note here that none
of the respondent said that Nano wont be successful. As
shown in the chart, the portion of purple color which
shows failure is not there at all.
But again every body does not believe in its
success. As seen form the chart, 50% of the respondent
has a doubt about success of Nano.
7/28/2019 New Product Launching Decisious
73/79
Nano- A Peoples Car !!!
in this chart, number of respondents is
given on the y axis and some features are given on x-
axis.
The question asked here is, What is it that
makes Nano a peoples car?
By analyzing the chart, we can say thatpeople consider the cost factor the most for Nano
followed by the innovation. Even looks has got quite
7/28/2019 New Product Launching Decisious
74/79
positive reply. Nano is a product that is developed
perfectly at minimum cost without sacrificing the quality.
Some Feedbacks Based OnQuestioner:
Positive Response
I have one more angle to look at Nano. I think it is
worlds most hyped about gadget after the iPhone.
Did I just say gadget. Well, yes Tata Nano is not
just a car; one can also look at it like an expensive
gadget which also gives us mobility. One of the very
few cute looking gadgets that all us geeks will love,
who would generally be interested in stuff that is
sleek and powerful. I am also hopeful that Tata will
launch FCV and alternative fuel cars soon.
I definitely would like to buy the car. Who would notwant a good car for just 100000 Rs?
Its just cool. One should definitely buy it.
7/28/2019 New Product Launching Decisious
75/79
Cheap As it is, but very smart and sexy. I would
defiantly buy it.
Congratulations to Mr. Rattan Tata. He did a real
good job.
Negative Response
It is impossible to build a car at such a price. No one
has been able to do it so far. It is just not possible.
It will be more like a scooter with a roof. I am sure no
one can make the car for the cost of two bikes.
This car is another auto rickshaw. It will add a lot to
the traffic on road.
It shall be a half car with no roof. I doubt if it will be
able to go up the flyovers.
It may be an upgraded Auto-rickshaw with plastic
body. It shall be a very unsafe car as the very idea of
1 Lac car is too farfetched to be true.
7/28/2019 New Product Launching Decisious
76/79
It shall never meet the emission norms. We shall
choke on the poisonous emissions from this car.
The disbelief kept piling up and up and was
further compounded by the competitors adding their
own mite to the speculations.
Mixed Response
IT HAS NOT BEEN DONE EVER. Even the nearest car
is double the cost. Let us see what Mr. Tata can do
to maintain the price line.
I am not very convinced but would definitely go for it
if it is safe.
7/28/2019 New Product Launching Decisious
77/79
I hope I can take my family of 4 in this car. I wish
Tata's make this dream a reality.
I know the talk is that it is a myth. However miracles
do happen. Let us wait and watch.
The reaction was a mixed one. People
wished it to be true but were very cautious about
expressing their optimism.
Conclusion
MY OPINION
After the study of various aspects I found
that
Nano Car Is Definitely Not For:-
7/28/2019 New Product Launching Decisious
78/79
Someone looking for better performance
Someone who is looking to impress
Someone who want to speed trial on Sunday
Someone who is looking for long drives.
But Nano Car Is Defiantly For
Someone who is looking to buy a car but cannot
afford much price.
A students who want to go college, tuition instead of
bike etc.
Someone who depends on second hand car.
For a house wife who can buy a car with her own
savings.
Someone who depends on scooter.
So Nano is not a basically a luxury cars but
it can fulfilled the all capacity for middle class people.
7/28/2019 New Product Launching Decisious
79/79
Impact Of Tata Nano On Life Of Common Man
In India every one can afford a Nano, just as we buy
any electronic appliances for a home uses.
Decrease in price of second hand car.
High traffic on roads due to sale of exceeds car on
roads.
Increase in loan on car installments.
And finally Nano is definitely better than
Maruti 800.
tata has succeeded in value engineering of
the product and its great success for tatas. Its
something on which India can feel proud of. Nano has
been developed effectively.