NEW PRODUCTS - stockyardsupply.comstockyardsupply.com/wp-content/uploads/2013/08/PR_Catalog_2010.pdfCHUTES & HEAD GATES he Powder River XL Manual Squeeze Chute with Right Side Exit

NEW PRODUCTS

2

TABL E O F C ONT ENTSCHUTES AND HEAD GATES

New Products . . . . . . . . . . . . . . . . . . . . . . .2XL Squeeze Chutes . . . . . . . . . . . . . . . . . . . .3Stabilizer Squeeze Chutes . . . . . . . . . . . . . . .4Rancher Hydraulic Squeeze Chute . . . . . . . . .5Manual Value Chute, Value Chute I . . . . . . . .6Classic Longhorn Squeeze Chute . . . . . . . . . .7Pregnancy Test Gates . . . . . . . . . . . . . . . . . .7Classic & Manual Value Stanchions . . . . . . . . .8Classic Self-catch Head Gates . . . . . . . . . . . .8Value Head Gate I . . . . . . . . . . . . . . . . . . . .8Chute Trailers . . . . . . . . . . . . . . . . . . . . . . .9Classic Loading Ramps . . . . . . . . . . . . . . . . .9

CATTLE SYSTEMS / CROWDING EQUIPMENTSystem 2000 Deluxe, System 2000 Rancher . .10System 2000 Alley Roll Gates, Preg Gates . . .11System 2000 Center Feed Sweep Tubs . . . . . .11System 2000 Diversion & Curved Alley . . . . .11System 2000 Cut Out Gates . . . . . . . . . . . . .11System 2000 Straight Alley, 25’ . . . . . . . . . .11System 2000 Classic Tub . . . . . . . . . . . . . . .11Double Down Alley . . . . . . . . . . . . . . . . . . .12Portable Sweep Tubs . . . . . . . . . . . . . . . . . .12Cattleman’s Tub & Alley . . . . . . . . . . . . . . .13Homesteader Deluxe . . . . . . . . . . . . . . . . . .13PRXL7 Tub & Alley . . . . . . . . . . . . . . . . . . .14Systems and Sweep Tubs, Diagrams . . . . . . .15Working Systems, Diagrams . . . . . . . . . . . . .16System 2000 Components . . . . . . . . . . . . . .17Runway Bows . . . . . . . . . . . . . . . . . . . . . . .18Deluxe Portable Alley Bow . . . . . . . . . . . . . .18Alley Stop & Alley Roll Gate . . . . . . . . . . . .18Utility Drop Gate . . . . . . . . . . . . . . . . . . . .18Classic Deluxe System & Components . . . . . .19Classic Crowd Alley . . . . . . . . . . . . . . . . . . .19

CALVESClassic Calf Table & Deluxe Calf Table . . . . . .20Calf Alley Tailgate, Calf Alley Stop . . . . . . . .20Calving/Health Pens . . . . . . . . . . . . . . . . . .21Calf Pass Panel & Calf Alley Panel . . . . . . . . .21

PANELSClassic 64” Panels . . . . . . . . . . . . . . . . . . .221600 Tube Panels, Super Classic Panels . . . . .23

GATES AND BOW GATESClassic Gates, Gate Wheel Kit . . . . . . . . . . . .24Boss Gates, Bolt on Lever Latch Assembly . . .241600 Tube Gates, 1600 Tube Bow Gates . . . .25Classic Bow Gates . . . . . . . . . . . . . . . . . . . .25

FEEDERSClassic Feeder Panels, 48” Feeder Panels . . . .26Water Troughs . . . . . . . . . . . . . . . . . . . . . .26Square Bale Feeders . . . . . . . . . . . . . . . . . .27Slant-Bar Rack Feeders . . . . . . . . . . . . . . . .27Slant-Bar Round Bale Feeders . . . . . . . . . . .27V-Rack Cattle Feeders . . . . . . . . . . . . . . . . .27Manger Feeders . . . . . . . . . . . . . . . . . . . . .27

RODEOElite Roping Chute . . . . . . . . . . . . . . . . . . .28Bucking Chutes . . . . . . . . . . . . . . . . . . . . .29Roping Arena Diagram . . . . . . . . . . . . . . . .29Classic 9-foot Bow Gates . . . . . . . . . . . . . . .30Classic Square Corner 70” Panels . . . . . . . . .30Classic Square Corner Gates, 60” Bolt Hinge. .30Rodeo Arena Diagrams . . . . . . . . . . . . . . . .31

POWDER MOUNTAIN HORSE EQUIPMENTHorse Stall Packages . . . . . . . . . . . . . . . . . .33Value Shelter Packages . . . . . . . . . . . . . . . .34Horse Round Pens . . . . . . . . . . . . . . . . . . .35Powder Mountain 18-gauge Panels . . . . . . . .36Powder Mountain 2” Super-Duty Panels . . . .37Powder Mountain 5 Rail AG Panels . . . . . . . .38Powder Mt. Horse Shelter & Panel Conn. . . . .38Powder Mountain Gates and Combos . . . . . . .39Horse Feeders . . . . . . . . . . . . . . . . . . . . . .40Arena Diagrams . . . . . . . . . . . . . . . . . . . . .41

POWDER CREEK VALUE EQUIPMENTPowder Creek Panels, Manger Feeder . . . . . . .42Powder Creek Panels, Gates . . . . . . . . . . . . .43 Powder Creek Combo Bow Gates . . . . . . . . . .44

MISCELLANEOUS PRODUCTSHot Dipped Galvanized Products . . . . . . . . .45Deer Gates . . . . . . . . . . . . . . . . . . . . . . . . .45Cattle Guards . . . . . . . . . . . . . . . . . . . . . . .46Weighing Systems . . . . . . . . . . . . . . . . . . .47Dog Kennels / Small Animals . . . . . . . . . . .48Secure Dog Kennels . . . . . . . . . . . . . . . . . .49Small Animal Panels, Wire Filled . . . . . . . . . .50Accessories . . . . . . . . . . . . . . . . . . . . . . . .51HERDMaster Chute, Warranty . . . . . . . . . . . .52

NEW Powder River’s InnovativeDouble Down Cattleman’s Tub and Alley!

NEW Powder River’s HERDMasterTM

Enhanced Cattle Squeeze Chute

NEW Double Down Cattleman’s Tub and Alley(Chute, Pregnancy Gates not included)

Loading Cattle Two by Two means Less Stress and Saves Valuable Time. Powder Rivercontinues providing the livestock industry with high quality, durable and innovativeproducts. The Cattleman’s Double Down Tub and Alley is the latest product to makeyour job quicker and easier. With the double alley options you can design any lengthof double down alley that you desire. The alley pins together easily, giving you theluxury of setting up a complete system in a couple of hours. If you need a squeezechute with your new double down alley, think Powder River’s latest, the “Stabilizer”, a dual head gate design to give you the ultimate in animal control.

Cover Photo by David R. Stoecklein,Photographer of the American West

NEW

NEW PRODUCTSNEW

Introducing the HERDMaster chute from POWDER RIVER, the leaders in livestock handling equipment. Taking on traits from its Powder River predecessors, theHERDMaster is strong, simple, and eff ective.

HEADGATE: The HERDMaster curtainstyle head gate is designed for securecatches and smooth exits. Semi-Auto-matic mode gives the operator furthercontrol when working animals alone.From calf to bull the HERDMaster headgate is an easy choice for any opera-tion. Split stanchion covers off er cleanlines. Durable urethane yokes adjustquickly for any animal height.

CENTER SQUEEZE: The HERDMastersqueeze mechanism is ground-breaking.It offers advantages of a clear operatorworking space and enhanced leverageon the controls. A dual sided squeezemeans the animal is centered and the‘V’ design keeps animals balanced inthe chute. The HERDMaster squeezesbetter and works safer. The chute features the easiest center squeezerelease in the industry.

EASE OF USE: The HERDMaster squeeze chuteleads the industry in usability, ergo-nomics,and operator safety. It sets the new standardfor simple operation. The handles are placedto allow you to work your animals longerwith less eff ort. The new Load AssistedTailgate lets you control traffic with the

BENEFIT: The HERDMaster chute receives itsheritage from the time tested, proven conceptsthat we have utilized for over half a century.Powder River has actively built livestock handling equipment for over 70 years and met the demands of our changing industryalong the way. We are pleased to introducethe HERDMaster chute to our family.flick of your wrist.

PatentPending

Order No. 002-20200

CHUTES & HEAD GATES

he Powder River XL Manual Squeeze Chute with Right Side Exit is Powder River’s top selling squeeze chute. This chute will stand up to the toughest of conditions.

It will handle bulls, large cows, and even calves if necessary. If you are debating between a Value Chute and the XL Chute, go with the XL. It will hold its value and last for many years to come, no matter how many head you run through it.

Side ExitA side exit, which swings fully open.

Split tailgateSheeted Split Tailgate keepsanimals from backing up.

XL CHUTE FEATURES AND SPECIFICATIONSJ Head Stanchion, Center Squeeze, split tailgate controlled

from one position enabling one-man operationJ Drop side pipes allow animal access from both sides for

vaccinating, pour-on, etc.J Tailgate locks open, allowing one-man operation of the

tailgate while working animal into the chuteJ Designed for animals up to 2500 lbs.J Positive locking side exit latch prevents accidentally openingJ Safety latch provides operator assurance on chute’s exit sideJ V-Pattern squeeze provides even pressure on animal to keep

them in a balanced upright position while being worked

The XL Chute with Self-Catch Head Gate includes all the featureslisted above. It is the same chute as the XL manual, with theexception of the Head Gate. The self-catch Head Gate allowsyou to work the alley more efficiently and not have to stay atthe Head Gate. It is not recommended for horned cattle.

XL MANUAL CHUTE SPECIFICATIONSLength Overall . . . . . . . 96”

Length Inside. . . . . . . . 86”

I.D. w/Auto Head Gate . 96”

Height Overall . . . . . . . 89”

Height Inside . . . . . . . . 66”

Widest Point. . . . . . . . 116”

Base Width . . . . . . . . . 47”

Adj. Sqz. Widths 7”/12”/17”

Main Frame 3” Square TubeControls . . . . Reversible L/R

Tailgate . . 1.66” O.D. Tubing

Order No. Description Weight

002-10052 XL Manual Chute RH Exit 1350 lbs.21/2” Square Tube Stanchions

002-10054 XL Manual Chute LH Exit 1350 lbs. 21/2” Square Tube Stanchions

002-20056 XL Chute RH Exit 1385 lbs. w/Self-Catch Head Gate

002-20058 XL Chute LH Exit 1385 lbs. w/Self-Catch Head Gate

XL Manual Chute with Right Exit Order No. 002-10052(Shown with optional Neck Extender Order number. 002-20000)

All Powder River XL Chutes Include:

XL Chute w/Self-Catch Head GateOrder No.002-20056

T

Bolt-on NeckExtender

Order No. 002-20000

3

CHUTES & HEAD GATES

RANCHERS CHOOSE POWDER RIVER XL CHUTES• Great investment — holds value• V-Pattern squeeze provides even pressure and keepscattle in a balanced and upright position

• Works in toughest conditions with low maintenance

Hinged Kick PanelsOur kick panels are hinged yet still totallyremovable. The panels are heavy gauge toreduce noise in the chute.

“I have been involved with ranching all my life… I have used nothingbut Powder River and will continue to, so long as I work cattle. It’sstrong, stout, built by folks with livestock know-how, and will last forgenerations to come...“ — John A., Larkspur Colorado

(Photo: John and his son - getting ready for a preg check session)

XL SQUEEZE CHUTES

4

STABILIZER SQUEEZE CHUTES

RANCHER XLSTABILIZER CHUTESPECIFICATIONS

RANGERSTABILIZER

SQUEEZE CHUTE

RANCHER XL STABILIZER SQUEEZE CHUTE

Stabilizer Spool rope actuator can be operated fromanywhere along the chute

Ten Drop DownSide Pipes foreasy accessto the animal

Return Springresets theshoulder/head catch

Close themanual headgate usingthe ropeanywherealong theside of thechute

HD Self-CatchHead Gate isquick, simpleto operate anddependable

Patented Stabilizer Manual Shoulder/Head Catch provides optimum control of the animal by providing asecond point of contact on the animal’s neck – also worksas a manual head gate for horned cattle and calves

All Steel split Kick Panels on eachside fold down or can be removed –providing a safe and easy access tothe lower part of the animal.

P owder River built the first All Steel Squeeze Chute over 60 yearsago and continues to take livestock handling equipment to a new level of safety and ease of use with the Stabilizer line of

Squeeze Chutes. The innovative Stabilizer gives cattlemen greater control of the animal than any of the conventional chutes on theMarket today. The all new Stabilizer Shoulder/Head catch provides a second contact point that greatly decreases any movement of the animal’s head, allowing for ease and efficiency while working the head and neck area. By controlling the head you control the rest of the animal, thus reducing stress.

Order No. 002-30000

Overall Length 106"

Inside Length 94"

Highest Point 88"

Weight 1,510 lbs.

RANGERSTABILIZER CHUTESPECIFICATIONS

Order No. 001-30000

Overall Length 103"

Inside Length 94"

Highest Point 80"

Weight 1,040 lbs.

91/2 inch opening between thedual head gates for neck access

Recommended for smallto average herds

Recommendedfor anyherd size

5

HYDRAULIC CHUTES

FEATURES AND SPECIFICATIONSJ Left Hand Controls J Right Side Exit opens fully for animal exitJ Stanchion, Center Squeeze, Tailgate controlled by 2 x 6 Ag CylinderJ Three width adjustments (manual)J Curtain-style fully sheeted tailgateJ Live Stanchion moves with squeeze sides for ease of animal controlJ One-piece 14-gauge kick panels with single center release latchJ Factory set pressure relief valve for animal safetyJ Neck extender included

Powder River’s Rancher Hydraulic Squeeze Chute has been thoroughlytested and is now ready for your ranch. Our hydraulic chute incorpo-rates a proven design with value engineering to make it affordable forthe average rancher. (The chute is not recommended for high volumefeedlots.) If you are a rancher with a desire to work your herd faster,safer and easier, choose the Rancher Hydraulic Squeeze Chute fromPowder River, the industry’s quality leader.

Neck Extender

Rancher HydraulicSqueeze ChuteOrder No. 003-40005

Order No. 003-40020 w/Pivot Arm Order No. 003-40005

CHUTELength . . . . . . . . . . . . .98”Width . . . . . . . . . . . . . .46”Widest Point . . . . . . . . .60”Highest Point . . . . . . . .95”Stanchion Widest Point . 30”Stanchion Clearance . . . .69”Tailgate Opening . . . . . .28”Tailgate Clearance . . . . .66”Chute Side Height . . . . .61”Chute Warranty . . . .5 years

RANCHER HYDRAULIC SQUEEZE CHUTESPECIFICATIONS

HYDRAULICSMotor . . . . . . Two Horse 1750 RPM

(110v or 220v)Pump . . . . . . . . . . . . . . Two StageValve . . . . . . . . . . . . . Three SpoolSystem Pressure. . . . . . . . 1000 lbs.Chute frame oil reservoir . 4 gallonsHydraulic Parts Warranty . . . 1 year

Weight . . . . . . . . . . . . 1,690 lbs.

Rancher Hydraulic Chute With Pivot ArmOrder No. 003-40020

FEATURES AND SPECIFICATIONSJ Control levers adjust vertically on pivot

arm allowing anyone to work the chutefrom a comfortable position, even from achair or stool.

J Pivot arm allows the hydraulic controllevers to be located from side to side orfront to back on either side of the chute.

J Allows for positioning the operator outof the animal’s flight zone.

J Pivot Arm & hoses can be purchased sep-arately and added to existing RancherHydraulic Chute (some weldingrequired).

POWDER RIVER HYDRAULIC CHUTE BUILT FORTHE COW/CALF OPERATOR• Affordable for the average rancher• Runs off 110 or 220 volt power• Live Stanchion moves with squeeze side adding to easeof animal control

• Chute with pivot arm allows you to decide where youwant your control levers

• XL Chute Trailer now works with hydraulic chute — seepage 10 for stirrup ordering information

Now you can decide the position of your hydraulic control levers withPowder River’s Rancher Hydraulic Chute w/Pivot Arm. The unique 340degree pivot arm gives you the freedom to decide from what locationyou want to run the chute.

Manual Value ChuteOrder No. 001-01003

(For herds of 30 head or less and for cattle 1100lbs. or less. Not designed for handling bulls.)

Value Chute I Order No. 001-01000

Order No. Dimensions Weight

001-01003 Length Overall . . . 92” 845 lbs.Height . . . . . . . . 75” Width Overall . . . . 37”

MANUAL VALUE CHUTESPECIFICATIONS


001-01000 Length Overall . . .93” 900 lbs.Height . . . . . . . . .74” Width Overall . . . .37”

VALUE CHUTE I SPECIFICATIONS

VALUE CHUTES FEATURES AND SPECIFICATIONSJ Manual Head Gate provides wide opening for catching horned animalsJ Chute sides squeeze simultaneously providing even pressure to the

animal, thus reducing chance of injuryJ Drop-side pipes allow animal access from either sideJ Kick panels are removable on each side for checking feet, udders, etc.J Chute sides can be adjusted at 7, 12, and 17-inches wide to

accommodate for the size of the animal being workedJ A right side exit comes with every chute, allowing the animal to exit

out the side if it does not want to exit out the front. The side exit is also a great safety feature if an animal gets down in the chute.

J The Value Chute is All-Steel construction for more years of serviceJ Nose Tongs come with each chute for keeping the head in a still

position for ear tagging or dehorning

Value Chute w/Side Exit

6

POWDER RIVER VALUE CHUTE IS DESIGNED FOR SMALL HERDS• Affordable all steel construction — safe for you and animal• Available with Self-Catch or Manual Head Gate• Comes with all of the key features of the XL ChuteFor herds of 30 head or less and for cattle 1,100 lbs. or less.Not designed for bulls.

VALUE CHUTES

7

Don’t lose valuable income due to brokenhorns and injured animals. Designed especiallyfor the Longhorn breed, our Classic LonghornChute has unique horizontal squeeze pipesthat allow the animal and its horns to passthrough the chute. The center of the stanchionopens to 28 inches, allowing the animal topass easily through the Head Gate. The sched-ule 40 horizontal pipes can be swung out ofthe way, providing access to the animal’ssides. The Longhorn Chute features one-mancontrol levers, a lock open tailgateand split removablekick panels.

Value Pregnancy Testing Gates are designedto connect to the Value Chutes using ourquick pin and clip connectors. They includea spring loaded latch gate on each side foreasy access, creating a safe working area.They can even be used as cut out gates.

Protect yourself and your veterinarian withPowder River’s Pregnancy Testing Gates. A positive single bar spring loaded latchlocks off the alley, forming a protectedwork-space. The Pregnancy Gates connectto both Classic XL Squeeze Chutes.

Pregnancy Test GateOrder No. 004-00040

Value Pregnancy Test GateOrder No. 004-00020

Classic Longhorn Squeeze ChuteOrder No. 002-00040

Order No. . . . . . .002-00040

Weight . . . . . . . .1339 lbs.

Base Width . . . . . . . . .47”

Widest Point . . . . . . .116”

Length Inside . . . . . . .86”

Length Overall . . . . . . .96”

Height Inside . . . . . . .66”

Height Overall . . . . . . .89”

Order No. Dimensions Weight004-00020 Gates, 16-gauge 30 x 64” 124 lbs.

Length Overall . . . .34” Width Overall . . . . .28” Height . . . . . . . . . .78” 13-gauge Frame

VALUE PREGNANCY TEST GATESPECIFICATIONS

LONGHORN CHUTESPECIFICATIONS

Order No. Dimensions Weight004-00040 Gate 30 x 52” 211 lbs.

Length Overall 34” Width Overall 28” Height 78”

Description: 13-gauge Frame, 12-gauge sheeting

PREGNANCY TEST GATE SPECIFICATIONS

Photo by David R. Stoecklein

Classic Self-Catch Head GateThe Classic Self-Catching Head Gate is especially convenient forone-person operations, this Self-Catch Head Gate will make yourjob easier and quicker. The Head Gate features quick releasemechanisms on the top and bottom of both sides and straightdrop-down stanchion covers. Animals can be quickly relieved if they begin choking or get stuck in the Head Gate by simply releasing the release mechanisms.(Connecting hardware included.)

Value Head GateIf a squeeze chute is not in your budget, the Value Head Gate I is very affordable. It can be attachedto Powder River Panels or adapted to your existing alleyway. The Value Head Gate I is a self-catch designand works best with polled or dehorned cattle. It canbe easily set to catch most any size animal.

Manual Value Head StanchionThe Manual Value Stanchion is a simple trouble-free scissor type design. Thenew and improved ratchet has moreteeth which creates less play in theHead Gate. Clevises included for connecting panels.

Classic StanchionA Powder River innovation, this Classic Stanchion featuresadjustable safety yokes allowing operators to remove the yokesproviding the animal with a straight drop-down stanchion. Formore control, the yokes can bereturned to the stanchion, andan optional neck extender giveseven further control. Perfect forall sizes of cattle, the unit bolts directly to posts, or pins toClassic Panels using the included single clevises. Available wood-to-panel adapters simplify mounting the unit to wood.

Order No. . . . . . . . . .001-00160Weight . . . . . . . . . . . . .270 lbs.Widest Point . . . . . . . . . . .116” Height Overall . . . . . . . . . . .81” Mounting Hole Width . . . .311/2” Base . . . . . . . . . . . . . . . . .47” Frame . . . . .21/2” Square TubingNose Tongs are Included

CLASSIC STANCHION LH SPECIFICATIONS

Order No. . . . . . . . . .001-00030Weight . . . . . . . . . . . . .321 lbs.Height Overall . . . . . . . . . . .77”Widest Point . . . . . . . . . . . .45” Catch Setting . . . . . .AdjustableExit Opening . . . . . . .27” x 63” Nose Tongs are Included

CLASSIC SELF-CATCH HEADGATE SPECIFICATIONS

Order No. . . . . . . . .001-01085Weight . . . . . . . . . . . .224 lbs.Height (overall) . . . . . . . .71”Widest Point . . . . . . . .371/2”Exit Opening . . . . . . . . . . .27”Frame . . . . . . . . . . .2” Sch. 40

VALUE HEAD GATESPECIFICATIONS

Order No. . . . . . . . . . .001-01096Weight . . . . . . . . . . . . .187 lbs.Height . . . . . . . . . . . . . . . .74” Widest Point . . . . . . . . . . . .58”(when closed)Width w/o handle . . . . . . . .38”

MANUAL VALUESTANCHION

SPECIFICATIONS

8

Intended for SmallHerds, 30 head or less

HEAD GATES

9

Chute TrailerOrder No. 004-00100

From small producers to large sprawling opera-tions, this chute trailer will get your chute tothe cattle. A heavy-duty winch and cable liftsthe chute into a transport position where it issecured with four pins. (Tires are not includ-ed.) It will not work with the Value Chuteand is not designed for highway use. Orderstirrups separately for Hydraulic, XL RancherStabilizer, Self-Catch (Auto) or LonghornChute.

Value Chute TrailerOrder No. 004-50000

This trailer is designed for the RangerStabilizer, Value Chute I and ManualValue Chute. It can be hooked to yourValue Chute in minutes. All connectorscome with trailer, 2-inch ball hitchrequired. (Tires are not included.) Not for highway use.


004-00100 Length Overall . . 154” 280 lbs.Width Overall . . 70” Frame . . . . . . . 52” Five 15” Lug Rims (no tires)Ball Hitch . . . . . .2”

004-00090 XL Manual / Longhorn Stirrup Set004-00095 XL Rancher Stabilizer / Auto

Chute Stirrup Set004-00125 Hydraulic Chute Stirrup Set

CHUTE TRAILER SPECIFICATIONS

Order No. Dimensions

004-50000 Length Overall 137”Weight Width Overall 65” 226 lbs. Frame . . . . . 451/2”

VALUE CHUTE TRAILERSPECIFICATIONS

With its gentle slope and unique stair-step design, this all-steel loadingramp allows you to load any type of livestock with ease. The stairs arefabricated from diamond steel plate, which will withstand many years ofheavy use. The deck height is adjustable from 30 to 50 inches. A hand-operated winch makes adjusting the ramp simple and quick. The ramplocks into place with a safety chain when the desired height is reached.The ramp can be ordered stationary or portable.

Ramp Length.....................................................14’

Height Settings ........................................30 to 50”

Rims .......................................................15” 5-lug

Bow Heights.......................................7’ 7” & 10’ 7”

Width Inside.....................................................35”

Solid Sides .......................................................18”

Height of Sides .................................................54”

Hitch ..........................................................2” Ball

Axle ................................3/12” Sq. Tube, 1/4” Wall

Entry Fitted w/Panel Pins & Clips (tires not included)

Order No. Description Weight012-00010 Ramp (stationary) 1114 lbs.

012-00011 Ramp (portable) 1264 lbs.

CLASSIC LOADING RAMP SPECIFICATIONS14’ Classic Loading Ramp

Handoperatedwinch

he System 2000 is the most advanced cattle working systemavailable. It is fully integrated allowing changes, additionsand modifications at any time. New parts fit seamlessly with

existing systems, without compromising efficiency and strength.

he 25-foot Straight Rancherincludes a System 2000Classic 30' Tub, a 25' Half-

sheeted Alley which has a System2000 Alley Roll Gate and a set ofcut-out gates. Our XL Manual RHExit Chute is also included with the system.

(See pages 15 - 17 for system diagrams and components)

Description Dimensions Materials

S2K Tub Panels (Gate Stoppers every 20”) Height . . . . . . . 72” Radius . . . . 110” 50” of 12-gauge Steel Sheeting Frame. . . 11/2”, 14-gauge

S2K Alley Panels (Outside) Height (Actual) 64” Radius . . . . 155” 50” of 12-gauge Steel Sheeting Frame. . . 11/2”, 14-gaugeHeight (Hung) . 72”

(Inside) . . . . . . . . . . . . . Radius . . . . 133”

S2K Alley Bow (Adjustable Widths 181/2”-29”) Height . . . . . . . 82” Width . . . . . 39” 2” Square Tubing Frame . . . . . . . 13-gauge

SYSTEM 2000 (S2K) GENERAL SPECIFICATIONS

T

T

41'

42'

(1) System 2000Tub Catwalk

(1) System 2000 Tub

(2) 68" StraightSheeted Panels

(1) System 2000Diversion Alley

(1) System 2000Alley Roll Gate

(5) System 2000Adjustable Alley Bows

(1) Over The BackNo Back

(1) XL ManualChute

w/right side exit

System 2000Curved Alley

(1) Calf AlleyOver The Back

No Back

(1) Calf AlleyTailgate

(1) Calf Table

(1) System 2000Alley Catwalk

(1) System 2000Preg GatesSystem 2000 Deluxe

Order No. 007-50009

CATTLE SYSTEMSCATTLE SYSTEMS

10


007-50009 S2K Deluxe 8,758 lbs.007-50010 S2K Straight 4,985 lbs.007-50011 S2K 25' Straight Rancher 5,439 lbs.007-50012 S2K Rancher Curved 6,508 lbs.007-50013 S2K Deluxe w/o Chute & Calf Table 6,880 lbs.007-50014 S2K 25' Straight w/o Chute 3,537 lbs.007-50015 S2K 25' Straight Rancher RH w/o Chute 3,991 lbs.007-50016 S2K Rancher Curved RH w/o Chute 5,059 lbs.007-50017 S2K Rancher Curved LH w/o Chute 5,059 lbs.007-50018 S2K 25’ Straight Rancher LH w/o Chute 3,991 lbs.007-50820 S2K 25' Straight Alley Half Sheeted 1,850 lbs.

SYSTEM 2000 (S2K) PACKAGES SPECIFICATIONS

SYSTEM 2000 IS SIMPLY THE STRONGEST MOSTVERSATILE WORKING SYSTEM ON THE MARKET• Most advanced cattle working system available — lesslabor and exceptionally safe

• Fully integrated — easy to add on to• Dual gate center feed tub allows cattle to flow naturally• Can be designed to fit almost anywhere

System 2000 (25-foot Straight) RancherOrder No. 007-50011

S-Curve Available

11

S2K Center Feed Sweep TubOrder No. 007-50100 (180°)

An innovative center-feed sweep tuballows cattle to enter from either side.This design works more efficiently direct-ing livestock easily through the alleys.

S2K Diversion AlleyOrder No. 007-50500

Direct your cattle through a separatealley with Powder River’s Diversion Alley.This design creates straight shots intoeach alley.

S2K Curved Alley(10’ Add Section)

Fully Sheeted Order No. 007-50300Half Sheeted Order No. 007-50827

The System 2000 Curved-Sheeted Alley isfully adjustable from 18 to 29 inches. TheAlley comes in 10-foot add sections. Theadjustment handles are out of the way andcan easily be adjusted from the catwalk.

S2K Cut Out GateFully Sheeted Order No. 007-50830Half Sheeted Order No. 007-50835

The System 2000 Cut Out Gates allowyou to sort animals out either side ofthe alley. These gates are part of thealley and are attached to the alley withadjustable bows, enabling you to keepthe entire alley at a desired width.

S2K 25-foot Straight Alley Order No. 007-50820

The System 2000 25-foot Straight Alleyis sheeted on the lower half and openon the upper portion allowing easyaccess to your animals.

S2K Preg GateOrder No. 007-50600Closes off Alley, givinga safe working areafor you or your vet.

System 2000 Alley Roll GateThe System 2000 Alley Roll Gate isideal for closing off your alley. It canbe opened and closed from either sideand is double sheeted with 12-gaugesheeting. It can be used almost anywhere and with any System 2000compatible products.

Order No. Dimensions Weight007-52080 811/8” x 60” 222 lbs.

323/4” x 703/4” (Gate)

S2K ALLEY ROLL GATE

S2K Classic Tub25’ Order No. 007-5010530’ Order No. 007-50115

The System 2000 Classic Sweep Tub is 72-inches high and comes with a catwalk.Unlike our Center Feed, Dual-Gate System2000, this tub has just one gate. When ordering, specify a right- or left-hand sweep.(photo shows right sweep – clockwise)

Portable Sweep Tub Order No. 005-00180Still the best portable sweep tub on the market. The 14-gauge 11/2-inch square tube panels, spring-loaded gatelatch and overhead braces at each panel junction make itextremely safe and durable. Reversible.

Order No. Description Weight005-00180 Bottom & Top Braces: 920 lbs.

1.66 O.D. 13-gauge Tubing 64” High Six Rail Panels

PORTABLE SWEEP TUB SPECIFICATIONS

The Homesteader’s 1/4 Circle Portable SweepTub is constructed of the same high strengthmaterials as our long-time popular PortableSweep Tub. It just comes with two less 8’Curved Panels and Braces, making it an idealsweep for the producer with just a few head ofcattle. It is easy to assemble and can be set upto sweep to the left or right. The 1/4 CircleSweep weighs 675 lbs.

1/4 Circle PortableSweep Tub

Order No. 005-00190

NEW Powder River’s Double Down Cattleman’s Tub and Alley!

NEW

Double Down Cattleman’s Tub and Alley(Chute, Pregnancy Gates not included)

Loading Cattle Two by Two means Less Stress and SavesValuable Time. Powder River continues providing the livestockindustry with high quality, durable and innovative products.The Cattleman’s Double Down Tub and Alley is the latest product to make your job quicker and easier. With the doublealley options you can design any length of double down alleythat you desire. The alley pins together easily, giving you theluxury of setting up a complete system in a couple of hours.If you need a squeeze chute with your new double down alley,think Powder River’s latest , the “Stabilizer”, a dual head gatedesign to give you the ultimate in animal control.

Cattleman’s Straight AlleyAdd Section

Order No. 006-30019>

Double Down Alley AddSection 6’<Order No. 006-30215

Double Down Alley Starter PackageOrder No. 006-30205

Double Down 30’ Tub Order No. 006-30220

Double Down Tub & Alley PackageOrder No. 006-30200

12

20-foot Curved AlleyCan be set up straight or curved.

Cattleman's Tub can be assembled with either a center or end exit

Cattleman’s Tub and Alley PackageOrder No. 006-30000

The Cattleman’s Tub and Alley is one of Powder River’s mostpopular sweep tub and alley systems. If you desire a sheetedsystem and System 2000 is out of your price range, theCattleman’s System is for you. The Cattleman’s System is 67” tall, allowing you to work cattle without the need for a catwalk, giving you a sturdy, functional working system in avery competitive price range. The 20’ alley can be set upstraight or curved and the tub can be set up for end or center feed.


006-30000 Cattleman’s Tub & Alley Package 2186 lbs.006-30010 20’ Cattleman’s Alley 1003 lbs.006-30015 30’ Cattleman’s Tub 1183 lbs.

CATTLEMAN’S SPECIFICATIONS

FEATURES J Includes 4-Deluxe Alley Bows, fully adjustable from 18” to as wide as 30”J Alley, heavy duty 14-gauge frame, 16-gauge sheetingJ Alley can be curved or straight depending on requirementsJ Three section Sweep Tub is 14-gauge frame and 14-gauge sheetingJ 10’ Sweep Tub Crowd Gate includes spring loaded latch J HD Sweep Tub top and bottom braces add additional supportJ The 67” height of the tub and alley is high enough

for good cattle flow, yet low enough to access cattle without the need for a catwalk

CATTLEMAN’S TUB AND ALLEY IS REASONABLY PRICED• Most affordable sheeted system available• Versatile to meet your design needs — end or center feed,curved or straight alley

• 67” height is high enough to keep cattle in but low enough towork the tub and alley from the ground without a catwalk

Chute notincluded

13

The Powder River 20' Homesteader Deluxe Alley matches up to the PortableSweep Tub. Order the alley separately or as a package with the sweep tub.10' Homesteader Deluxe Add Sections are also available to lengthen youralley. Add either Pregnancy Testing Gates and the Powder River SqueezeChute of your choice for a complete working system. 2’ x 8’ pieces of woodcan be bolted between the lower three rails by drilling through the woodand vertical stays that are on the panels. (Wood and bolts not included)

Order No. Description Weight011-00003 Homesteader Deluxe Package 1573 lbs.011-00004 20’ Homesteader Deluxe Alley Only 652 lbs011-00005 10’ Homesteader Deluxe Add Section Only 270 lbs005-00180 Portable Sweep Tub Only 920 lbs.

HOMESTEADER DELUXE SPECIFICATIONS

FEATURES AND SPECIFICATIONSJ System is very portable and easy to

assemblyJ 10’ add sections can be added to the

20’ alleyJ Alley adjusts from 18 - 32” to handle

almost any sized cattleJ 180° heavy-duty sweep tub comes

with connecting hardware

HOMESTEADER DELUXE BUILT FOR SAFETY• Toughest open rail system on the market• Adjustable alley — can handle calves to bulls• Portable and assembles in less than an hour

Homesteader DeluxeOrder No. 011-00003

14

PRXL7 Tub & Alley

PRXL7 Tub and Alley Package Order No. 010-50100

FEATURES AND SPECIFICATIONSJ Package consists of a 1/4 Tub and 10’ of

adjustable alley

J 2” Tubing and 6’ height

J Will fit in full sized pick up bed

J Can be set up for left or right sweep

J Powder Coat finish provides long lasting protection

J Alley adjusts from 19”-29”

J Connectors included to hook to Value Chute or Value Head Gate

Order No. . . . . . . . . . .010-50100Weight . . . . . . . . . . . . .1,050 lbs.Sweep Gate and Panels constructed of 2” 16-gauge tubing

Gate frame constructed of 2” schedule 40 pipe

13-gauge top & bottom braces between each 4’ tub panel

11-gauge Alley Bows

PRXL7 SPECIFICATIONS

2-inch Tube, 72-inch High

THE PRXL7 IS A GREAT WORKING SYSTEMFOR SMALL HERDS

• Portable — will fit in full-size pick up• 72” height and 2” diameter tubing creates intimidating barrier• Top and bottom braces between each tub panel provides a safeworking area

15

System 2000Layout #7

No. 007-50007


No. 007-50001


No. 007-50008


No. 007-50002


No. 007-50005


No. 007-50006

System 2000Deluxe

No. 007-50009


No. 007-50004


No. 007-50003

30’ RH SWEEP 88.5 Panel 007-50115

30’ RH SWEEP 10’ Panel 007-50135

30’ LH SWEEP 88.5 Panel 007-50120

30’ LH SWEEP 10’ Panel 007-50140

16’ LEFT HAND SWEEP 007-50130

25’ LEFT HAND SWEEP 007-50110

16’ RIGHT HAND SWEEP 007-50125

25’ RIGHT HAND SWEEP007-50105

16

CATTLEMAN’S TUB AND ALLEY PACKAGEOrder No. 006-30000

CLASSIC DELUXEOrder No. 011-00030

SYSTEM 2000 CLASSIC RANCHER CURVEDOrder No. 007-50012

SYSTEM 2000 25’ STRAIGHT RANCHEROrder No. 007-50011

SINGLE GATE CURVED RANCHEROrder No. 007-50875

HOMESTEADER DELUXEOrder No. 011-00003

Note: Necessary adapters are included when ordering these complete system packages.

Call 1-800-453-5318 for FREE System Design and Drawings

DOUBLE DOWN 30’ TUB AND 35’ ALLEY

Order No. 006-30200

SYSTEM 2000 “S” CURVE PACKAGE

Order No.007-50019

17

Runway Bows Order No. 024-00730

Design your own portable runway or alley and keep it from spreading with a 34-inch Runway Bow. All of the adapters and drop pins are included.

Alley Roll Gate Order No. 028-00024

The Alley Roll Gate can be placed virtuallyanywhere. Use it to separate animals in thealley, slow animal movement and keep animalscalm by limiting their vision. The gate issheeted up 59 inches (64 inches from theground), and is hung from two four-wheel carriers in an overhead track to carry the gatesmoothly to the open and closed positions.

Deluxe Portable Alley BowOrder No. 005-00360

Add these Portable Deluxe Alley Bowsto our Classic Panels to create a durableand portable working alley. Alley Bowsare adjustable from 19 to 30 inches.Constructed of 11/2-inch square tubing,the bow measures 35 x 78 inches.

Alley Stop Order No. 004-00050The Powder River Alley Stop preventscattle from backing up. Alley Stopsmount easily to classic or tube panels.

Utility Drop Gate Order No. 001-00315

The Utility Drop Gate is a less expensive alterna-tive to the Alley Roll Gate. It can be placed any-where in the alley and is ideal for separating youranimals or closing off your pregnancy testinggates. The gate can be raised and lowered withthe included rope and pulley. It can be tied offto keep open and there is a lock keeping it in theclosed position. This prevents animals from beingable to lift the gate up from underneath.

Order No. . . . . . . . . . . . .024-00730Weight . . . . . . . . . . . . . . . . .40 lbs.Bow Frame 11/2” 14-gauge Square TubeHeight . . . . . . . . . . . . . . . . . . .78”Width . . . . . . . . . . . . . . . . . . . .34”

RUNWAY BOWSPECIFICATIONS

Order No. . . . . . . . . . . . . . . . . . . . . 028-00024Weight . . . . . . . . . . . . . . . . . . . . . . . 158 lbs.Frame . . . . . . . . 11/2” 14-gauge Square TubingHeight Overall . . . . . . . . . . . . . . . . . . . . . 81”Length of Top Channel . . . . . . . . . . . . . . . 60”Width Inside . . . . . . . . . . . . . . . . . . . . . . 30”Gate . . . . . . . . 35” x 59” (73” to Top of Frame)

ALLEY ROLL GATE SPECIFICATIONS

Order No. . . . . . . . . . . . . . 004-00050Weight . . . . . . . . . . . . . . . . . 21 lbs.Height . . . . . . . . . . . . . . . . . . 161/2”Width . . . . . . . . . . . . . . . . . . 151/2”

ALLEY STOP SPECIFICATIONS

Order No. . . . . . . . . . . . . 001-00315Weight . . . . . . . . . . . . . . . . 100 lbs.Total Height . . . . . . . . . . . . . . . 79”Total Width . . . . . . . . . . . . . . 351/2”Gate Height . . . . . . . . . . . . . . . 44”

UTILITY DROP GATESPECIFICATIONS

Order No. . . . . . . . . . . . . . . . 005-00360Weight . . . . . . . . . . . . . . . . . . . 61 lbs.Bow Frame . . 11/2” 14-gauge Square TubeHeight . . . . . . . . . . . . . . . . . . . . . . 78”Width . . . . . . . . . . . . . . . . . . . . . . 35”

DELUXE PORTABLE ALLEY BOWSPECIFICATIONS

18

CROWDING EQUIPMENTCROWDING EQUIPMENT

Over-the-Back NoBack Alley StopOrder No. 007-51115

Weighs 42 lbs.Powder River's Over-The-Back No Back works onSystem 2000, the ClassicDeluxe Alley as well ason the Cattleman's Alley.It keeps the cattle frombacking up in the alley.The No Back is adjustableto accommodate all sizesof cattle and includes aspring which softens thefall of the no back.

he Classic Deluxe System is the perfect way to work cattle ofany size. It includes a Single Gate, Center Feed Sweep Tub,Alley Roll Gate, 20-feet of half-sheeted adjustable Alleyway

and an Alley Stop. You can add more alley by ordering 10-foot addsections. A 5-foot Cut Out Gate section is also available.

By keeping your cattle moving through this adjustable 20-foot Straight Crowding Alley, you’ll save time and cut costs.(30-foot pictured) Available in 20-foot complete units (or with as many additional 10-foot sections as necessary tofit your particular needs), this versatile unit can be set up with adjustable width levers on the right or left hand side.The tailgate swings outward and locks open. The unit may be set up for portable use or be permanently installed. It can be mounted on wood or concrete, or set on solid ground and staked down.

Classic Straight Crowd Alley

20’ Classic Deluxe Alley

Classic Deluxe Cut Out Gate

Classic Deluxe System(Chute, Cut Out Gates, and Holding Pen not included)


011-00030 Classic Deluxe System 2,505 lbs.006-01000 20’ x 60” Classic Deluxe Alley 1,100 lbs.007-50840 Single Gate Center Feed Tub (RH) 1,387 lbs.OPTIONS006-01005 10’ x 60” Classic Deluxe Add Section 429 lbs.006-01003 5’ Classic Deluxe Cut Out Gate Section 313 lbs.

CLASSIC DELUXE SYSTEM SPECIFICATIONS

Side Panel Height . . . . . . . . . . . . . . . . . . . . . 60”Adjustable Width . . . . . . . . . . . . . . . . . . 18 to 30”Cut Out Gate . . . . . . . . . . . . . . . . . . . . . . . . . 54”Solid Panels . . . . . . . . . . . . . . . . . . . . . . . . . . 20”Alley Bows . . . . . . . . . . . . 2” Sch. 10 Pipe, 8' High


006-00010 20' x 60” Straight Crowd Alley 1146 lbs.006-00030 10' x 60” Straight Crowd Alley Add-on 452 lbs.

CLASSIC CROWD ALLEY SPECIFICATIONS

19

T

OUR CLASSIC DELUXE SYSTEM WORKS ANY SIZE CATTLE• If you like our original Classic Crowd Alley you will love this one• Half sheeted alley allows for easy access to cattle in the alley• Unique tub design makes for smooth and easy cattle flow

Classic Deluxe Calf TableOrder No. 008-00012

The Classic Deluxe Calf Table has a head gate on both endsgiving you a completely reversible calf table without havingto remove parts. Simply turn the calf table end for end.

Classic Calf Table Order No. 008-00010

The Powder River Classic Calf Table is the most durable and func-tional table in the market. There are producers that are still usingPowder River Calf Tables that were built in the 50’s. The Classic CalfTable has a wide opening Head Gate for ease of catching your calves.It tips for ease of accessing your calves for branding, vaccinating, etc.The Classic Calf Table is reversible for right or left side branding.

Classic Deluxe Calf Table inupright position. (withoptional headboard)

Calf Alley TailgateOrder No. 008-00020 (48 lbs.)

This 18-inch wide gate pinsonto the end of your CalfAlley Panels, preventingaggressive calves from get-ting out of the alley whenthe tipping table is down.The tailgate locks shut withthe provided chain.

Calf Alley StopOrder No. 008-00030 (18 lbs.)

Mount this positive alley stopnear the entrance of your calfalley. Once calves pass throughthis stop, they cannot back up.The calf alley stop will mountanywhere in the alley.


008-00012 Height Overall . . . . . . .63” 398 lbs.Width Overall . . . . . . .55”Length Overall . . . . . .60”Base Width . . . .56” x 45”

008-00050 Headboard (optional) 15 lbs.

CLASSIC DELUXE CALF TABLESPECIFICATIONS Order No. Description Weight

008-00010 Height Overall . . . . . .63” 347 lbs.Width Overall . . . . . .55”Length Overall . . . . . .60”Base Width . . . .56” x 45”

CLASSIC CALF TABLE SPECIFICATIONS

20

CALF TABLE FEATURESJ Handles calves up to 450 lbsJ Scissor-type manual stanchion can be opened at the desired

width for catching your calfJ Dally cleat is included for tying a leg back out of the wayJ Seven drop-side pipes can be dropped and swung out of the

way for easy access to calf’s side for branding and vaccinatingJ Quick release pin allows you to drop the side in an emergencyJ Three settings for the tip angle of the tableJ Optional headboard w/tie-down chain available

CALVESCALVES

POWDER RIVER CALF TABLES — THE LEGEND LIVES ON• Classic Deluxe has head gate on each end• Classic only has a head gate on one end but iseasily reversible for opposite side branding

• Smooth tipping action for easy side access forbranding, vaccinating and more


Calving/Health Pen Order No. 008-00100

Loss of income due to low calving rates can make or break aproducer. Powder River’s 10 by 10-foot Calving Pen can payfor itself in the first season and add to your bottom line foryears to come. This unit also makes an excellent sick pen.

FEATURES AND SPECIFICATIONSJ Panels and gates constructed of 14-gauge, 11/2-inch square tubing.J Self-Catching Head Gate with Safety Release Mechanism has two emergency trip releases

that quickly relieve pressure on an animal’s neck if needed. This unit also works well for those who prefer to calve with the animal on its side.

J Both Calving Pen squeeze panels swing 180 degrees – completely out of the way – crucial when animal is calving and requires assistance from more than one person.

J Both Calving Pen squeeze panels are split, allowing full access while ensuring a safe confinement situation for operator and animal.

J 10-foot gate is fitted with a sure latch closure for ease of use during one-man operation.J Rope and cleat device keeps the animal contained. The device is quiet and safer than traditional metal ratchets.J The 30-inch roll gate in the front of the calving pen provides easy access for the operator and is self-locking in the closed position

Calf Alley Panels (left)These 52-inch high, 5-railtube panels connect to anyPowder River panels. Usethese panels to push calvesfrom any working systeminto the calf table. Thesepanels are high enough tokeep calves in the alley, butlow enough to easily workthe animals.

12-foot Calf Pass PanelOrder No. 040-00008

Keep larger animals out of restrictedfeeding areas with our Calf Pass Panel,while giving the smaller animals exclusiveaccess to supplemental feeding. Thesepanels connect to any Powder Riverpanel or post.

Frame 1.66” O.D. 16-gauge Tube

Horizontal Rails . . .(5)

CALF ALLEY PANEL & COMPONENTSSPECIFICATIONS


019-00008 8' Calf Panel 62 lbs. 019-00012 12' Calf Panel 84 lbs.008-00020 Calf Alley Tailgate 48 lbs.008-00030 Calf Alley Stop 18 lbs.

Order No. . . . . . . . .040-00008 Height Overall . . . . . . . . . . .64” Length Overall . . . . . . . . . . .12’ Weight . . . . . . . . . . . . .144 lbs. Max. Size Animal . . . .16” x 51” Height Settings 40,” 43,” 47,” 51”

12’ CALF PASS PANELSPECIFICATIONS

21

POWDER RIVER CALVING / HEALTH PEN —GREAT MULTI-PURPOSE HEALTH PEN• Safe and efficient pen for calving or doctoring • Self-Catching Head Gate with safety release mechanismreleases quickly and easily if an animal goes down

• Split squeeze panels, allowing full access while ensuringa safe confinement situation for operator and animal

Order No. . . . . . . . . . . . . . . . . .008-00100Panel/Gates . . .11/2” 14-gauge Square TubeGates and Panels Height . . . . . . . . . . .64”Height Overall . . . . . . . . . . . . . . . . . .84”Sheeted Roll Gate Opening . . . . . . . . .30”Weight . . . . . . . . . . . . . . . . . . .1285 lbs.

CALVING PEN SPECIFICATIONS

Flat surfaceless bruising

High Tensile steel adds superior strength and durabilitywhich is 66% stronger than most common steel panels

Photo courtesy of Dutch Joe Ranch

Classic 64-inch Panels

egendary in strength and backed by a Classic Five Year Limited Warranty,Powder River’s Classic Panels are made from 14-gauge High Tensile Steelformed into our exclusive “Pentagonal Rail.” These rails are surrounded

with a 13-gauge frame, making them strong durable panels with an amazingability to take large amounts of pressure and spring back into their originalshape. Vertical stays on both sides of the panel increase the panel strength.Recommended for high-pressure applications, these panels will outlast any commercial steel panel on the market today.

22

Height Overall . . . . . . . . . . . . . . . . . . . 64”Frame . . . . . . . . . 1.66” O.D. 13-gauge Tube5 Pentagonal horizontal rails14-gauge High Tensile Steel material

Order No. Description No. Stays Weight

022-00006 6' Classic Panel 0 73 lbs.






CLASSIC PANEL SPECIFICATIONS

PANELSPANELS

L

HIGH TENSILE STEEL

Why Buy Classic Gates and Panels?1. Classic Pentagonal Rail and Vertical Stay aremade of 14-gauge High Tensile Steel which is 66%stronger than mild steel which is used in mosttube gates and panels on the market today.

2. The engineered superior design of the pentagonal open rails and formed stays adds substantial strength and durability.

3. The design and engineering of our “classic” lineof gates and panels gives us the confidence toextend an unsurpassed 5 year limited warranty.

HIGH TENSILE STEEL

High Tensile steel adds superior strength and durabilitywhich is 66% stronger than most common steel panels

Flat surfaceless bruising

1600 Tube PanelsThe 1600 Series Tube Panels are the ideal all-purpose panel for use in portable or permanent situations. The recent change to square corners gives you the flexibility touse these panels for cattle and horses. The 1600 Tube Panelshave the same 14-gauge vertical supports that we use on ourclassic line, separating this 16-gauge tube panel from the rest.

Height Overall . . . . . . . . . . . . . . . . . . . . . . 64” Horizontal Rails (6) . . . 1.66” O.D. 16-gauge Tube Connector Pins . . . . . . . . . . . . . . . . . 5/8” x 12” Legs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12”

Order No. Description No. Stays Weight

021-01108 8' Tube Panel 1 72 lbs.

021-01110 10' Tube Panel 1 86 lbs.

021-01112 12' Tube Panel 1 99 lbs.

021-01114 14' Tube Panel 2 118 lbs.

021-01116 16' Tube Panel 2 131 lbs.

1600 TUBE PANEL SPECIFICATIONS

23


022-00103 3’ Panel 48 lbs.022-00104 4’ Panel 57 lbs.022-00106 6’ Panel 76 lbs.022-00108 8’ Panel 101 lbs.022-00110 10’ Panel 120 lbs.022-00112 12’ Panel 145 lbs.022-00114 14’ Panel 164 lbs.022-00116 16’ Panel 189 lbs.

SUPER CLASSIC BULL PANEL SPECIFICATIONSOverall Height . . . . . . . . . .70”Legs . . . . . . . . . . . . .10” HighFrame 1.66” O.D. 13-gauge Tube

Horizontal Rails, Pentagonal 14-gauge, High Strength

Vertical Stays (Quantity)– 8’ & 10’ (1), 12’ & 14’ (2), 16’ (3)

6" Taller

Super Classic Bull Panels (left)

Powder River's Super Classic Bull Panels are not just forrodeos anymore. Today's cattle breeds are taller than everand need the extra height that the Super Classic provides.These panels are 70" tall which is 6" taller than our standardClassic Panels. Super Classic Panels include the same numberof 14-gauge rails, 13-gauge frame, same 14-gauge verticalsupports as 64” Classic Panels and will connect to them aswell. The difference is the square corners and the extraheight. Super Classic Bull Bow Gates are available to matchup to the 70" Super Classic Panels.

Super Classic Bull Panels

POWDER RIVER 1600 TUBE PANELS — ALL PANELSARE NOT CREATED EQUAL• Rails are inserted between two or four 14 gauge high tensilevertical stays, which are 60% stronger than common steel, separating this panel from other brands

• Connects to all other styles of Powder River panels whichallows you to connect to your current Powder River equipment

• Great all purpose panel, works for cattle or horses

Classic 52-inch Gate with Lever Latchade to the same heavy-duty specifications as our Classic Panels, and featuring the sameClassic Five-Year Limited Warranty, this gate is a must for crowding situations. Like theClassic Panels, this gate can withstand large amounts of pressure and spring back to

its original shape. The hinge is another key ingredient in the formula for strength. Made of1/4-inch x 3-inch steel, these 180-degree hinges can be mounted to wood or welded to steelposts. A double-piston lever latch provides opening ease while on the ground or on horse back.

Gate Wheel KitExtend the life of yourgate, hinges, postsand back muscles!This semi-pneumaticwheel unit adapts toany gate with a 1.66-inch O.D. frame.

Bolt on Lever LatchConvert your chain latch gate to a leverlatch with Powder River’s new bolt onlever latch assembly. The latch isreversible and allows you to open andclose your gate from horseback. Alsoavailable for Powder Mountain gates.

Height Overall . . . . . . . . . . . . . . . 52”Frame . . . . . 1.66” O.D. Tube, 13-gaugeHORIZONTAL RAILS:(5) Pentagonal, 14-gauge High StrengthHinges . . . . . . 1/4” x 3”, 180° Swing

ClassicOrder No. Gate Size No. Weight

(Lth x Hth) Stays

032-00003 3' x 52” 0 42 lbs.

032-00004 4' x 52” 0 52 lbs.

032-00006 6' x 52” 0 70 lbs.

032-00008 8' x 52” 1 95 lbs.

032 00010 10' x 52” 1 113 lbs.

032-00012 12' x 52” 2 138 lbs.

032 00014 14' x 52” 2 156 lbs.

032-00016 16' x 52” 3 181 lbs.

CLASSIC 52” LEVER LATCH GATE SPECIFICATIONS


032-03230 52” Bolt on 17 lbs.Lever Latch

BOLT ON LEVER LATCH SPECIFICATIONS

Order No. Description

032-03200 6” Gate Wheel Kit 032-03201 8” Gate Wheel Kit 032-03202 10” Gate Wheel Kit 032-03203 12” Gate Wheel Kit 032-03204 Gate Wheel Bracket Only

GATE WHEEL KITSPECIFICATIONS

24

GATESGATES

BOSS FEATURES AND SPECIFICATIONSJ 14 / 16-gauge ConstructionJ 2” Diameter TubeJ Square Corner designJ 14-gauge Classic Vertical StaysJ Chain LatchJ 2 Sets of Vertical Stays on the 12’, 14’ and 16’J 1” x 14” Threaded Rod HingeJ Collar-Style Hinge rather than a clamp J Powder Coated Powder Mt. BrownJ Great fit between Classic and 1600 Tube Gates

BOSS GATES SPECIFICATIONS2” Tube Gates – 5 Rail


034-11004 4’ x 48” 38 lbs.034-11006 6’ x 48” 54 lbs.034-11008 8’ x 48” 74 lbs.034-11010 10’ x 48” 78 lbs.034-11012 12’ x 48” 100 lbs.034-11014 14’ x 48” 116 lbs.034-11016 16’ x 48” 132 lbs.

Boss Gate

M


25

Classic Bow Gates Ideal for free-standing portable systems. The Classic Bow Gate frameis made from a heavy schedule 40 pipe, while the bottom section ismanufactured from a 7-gauge steel. Our Classic Gates are hung withinthe bow, making this the strongest Bow Gate on the market.

1600 Tube GatesThe 1600 Series Tube Gates are built to the same tough specifications as the1600 Tube Panels. Powder River’s 1600 Tube Gates come with a choice of our180 degree steel hinges or our 12” long threaded bolt hinges. These gates areperfect for pasture, lanes, driveways and limited crowding.

1600 Tube Bow GateFor portable or permanent installations, our 1600 Tube BowGates have a single pin slide latch with keeper. This makesfor optimum ease of use and safe animal confinement.

Height Overall . . . . . . . . . . . . . . . . . . . . . . . . 52”Horizontal Rails (6) . . . . . 1.66” O.D., 16-gauge TubeHinges . . . . . .3/4” x 12” Threaded-rod or 180° FlatLatch . . . . . . . . . . . . . . . . . . .33” Chain w/Keeper

Order No. Description No. Stays WeightThreaded-rod Hinge

033-16004 4' Tube Gate 0 37 lbs. 033-16006 6' Tube Gate 0 51 lbs. 033-16008 8' Tube Gate 1 70 lbs. 033-16010 10' Tube Gate 1 83 lbs. 033-16012 12' Tube Gate 1 96 lbs. 033-16014 14' Tube Gate 2 116 lbs. 033-16016 16' Tube Gate 2 129 lbs.

180 Degree Hinge

033-18004 4' Tube Gate 0 38 lbs.033-18006 6' Tube Gate 0 51 lbs. 033-18008 8' Tube Gate 1 70 lbs. 033-18010 10' Tube Gate 1 84 lbs. 033-18012 12' Tube Gate 1 97 lbs. 033-18014 14' Tube Gate 2 116 lbs. 033-18016 16' Tube Gate 2 129 lbs.

1600 TUBE GATE SPECIFICATIONS

Order No Description Dimension Weight(8' High Bow,52” High Gate)

028-00803 3' Classic Bow Gate 11/4” Sch. 40 Pipe 114 lbs.028-00804 4' Classic Bow Gate 11/4” Sch. 40 Pipe 122 lbs.028-00806 6' Classic Bow Gate 2” Sch. 40 Pipe 187 lbs.028-00808 8' Classic Bow Gate 2” Sch. 40 Pipe 226 lbs.028-00810 10' Classic Bow Gate 21/2” Sch. 40 Pipe 313 lbs.028-00812 12' Classic Bow Gate 21/2” Sch. 40 Pipe 359 lbs.

CLASSIC BOW GATE SPECIFICATIONS

Threaded-rod Hinge3/4” x 12”

1600 TUBEGATE HINGES

Flat Hinge180 degree swing

POWDER RIVER BOW GATES ARE THE STRONGESTTOUGHEST BOW GATE MADE• Best way to make portable corrals without the need forsetting a post — fast to install

• Bow frames are built sturdy enough to handle the gateand keep it from sagging

• Connects to all Powder River panels in seconds

Order No. Dimensions Capacity Weight

070-03006 6’ x 30” / 151/2” Deep 115 gal. 125 lbs.070-03010 10’ x 30” / 151/2” Deep 195 gal. 196 lbs.070-03012 12’ x 30” / 151/2” Deep 235 gal. 227 lbs.070-04810 10’ x 48” / 19” Deep 415 gal. 295 lbs.070-04812 12’ x 48” / 19” Deep 495 gal. 340 lbs.070-04814 14’ x 48” / 19” Deep 583 gal. 398 lbs.

GALVANIZED WATER TROUGH SPECS

Classic Feeder Panel

ur 64-inch tall Classic Feeder Panels will standup to years of use and substantially increaseyour feed savings. These panels attach easily

to other Powder River panels and to wood or steelposts with available adapters.

12-foot, 48-inch Feeder PanelThese 48-inch, 14-gauge Feeder Panels are an extremely economicaland versatile way to feed your animals. With wood-to-panel connectorsor single clevises, they can be installed anywhere.

Water TroughsThese water troughs are constructedof 14-gauge steel with rolled-topedges and smooth welded cornersfor protection of the animal. Ourtroughs are approved and used bymany state and federal agencies. We now have hot-dipped galva-nized troughs available for extraprotection that will carry a 10-year limited warranty.

(Painted troughs will continue to be available, but will not carry a warranty).

CLASSIC FEEDER PANEL SPECIFICATIONS

Order No. . . . . . . . . . . . 041-01248Weight . . . . . . . . . . . . . . . 121 lbs. Height Overall . . . . . . . . . . . . . 48”Slant Bar Space . . . . . . . . . . 121/2”Solid Bottom . . . . . . . . . .1 4-gaugeFrame . . . . . .11/2” Square 14-gaugeSlant Bars . . . . . 1.66 16-gauge TubeFeeding Spaces . . . . . . . . . . . . . . 9

12-FOOT, 48-INCH FEEDERPANEL SPECIFICATIONS

Height Overall . . . . . . . . . . . . . . . . 64”Solid Bottom . . . . . . . . . . . . . . . . . 15”Frame . . . . . . . 1.66” O.D. 13-gauge TubeBar Space Approximately . . 121/2” x 33”Slant Bar . . . . . . . . . . . . 1” Sch. 40 Pipe


040-00210 10’ Panel (8 spaces) 153 lbs.

040-00212 12’ Panel (10 spaces) 178 lbs.

040-00216 16’ Panel (14 spaces) 236 lbs.

26

FEEDERSFEEDERS

Order No. Dimensions Capacity Weight

042-00306 6’ x 30” / 151/2” Deep 115 gal. 125 lbs.042-03010 10’ x 30” / 151/2” Deep 195 gal. 196 lbs.042-03012 12’ x 30” / 151/2” Deep 235 gal. 227 lbs.042-04810 10’ x 48” / 19” Deep 415 gal. 295 lbs.042-04812 12’ x 48” / 19” Deep 495 gal. 340 lbs.042-04814 14’ x 48” / 19” Deep 583 gal. 398 lbs.

GREEN WATER TROUGH SPECIFICATIONS

O

CLASSIC FEEDER PANELS ARE BUILT TO LAST• Cattle push hard when feeding and Classic Feeder Panels are built to handle the pressure for years of use• Slant bar design keeps heads from pulling out as often, thus preventing waste of expensive feed and saving money• Pin to other Powder River Panels and posts providing you flexibility in design and ease of installation

• Built so tough we provide you a 5 year limited warranty on this feeder panel

5-foot V-Rack Feeder

MangerFeeder

Section Connector

Slant Bar RoundBale Feeder

Our Slant Bar Round Bale Feeder is a greatvalue. The panels are made from 16-gauge,1.66-inch tube. The 18-inch high pan is madefrom one single piece of 16-gauge sheeting,which means you get a stronger, more durablefeeder for your money. Improved panel con-nectors allow feeder to be easily and quicklyassembled with just three bolts. This feeder is available with or without legs.

Order No. . . .055-00050Weight . . . . . . . .44 lbs. Height . . . . . . . . . .30”Width . . . . . . . . . . .24”Depth . . . . . . . . . . .15”

MANGER FEEDERSPECIFICATIONS

Section ConnectorDiameter . . . . . . . . . . . . . . . . . . . . . 8’Height Overall . . . . . . . . . . . . . . . . 48” Solid Panel . . . . . . . . . . . . . . . . . . 18” Frame . . . . . . 1.66” O.D. 16-gauge TubeLegs (optional) . . . . . . . . . . . . . . . . 4” Slant Bars . . . 1.66” O.D. 16-gauge TubeFeeder Openings . . . . . . (19) 14 x 281/2”


040-04000 Round Bale Feeder 226 lbs.040-04010 Round Bale Feeder w/Legs 231 lbs.

SLANT BAR ROUND BALEFEEDER SPECIFICATIONS

10-foot Slant Bar Rack FeederPowder River’s all-steel cattle feeders are renowned for theirstrength and quality. Durability and feed-saving design areimportant features to consider before you buy. Our feeders arebuilt with a sturdy 14-gauge, one-piece box construction. Theskids are made from 13-gauge, 1.66-inch O.D. tube frame.

Order No. Description Weight035-02045 Slant Bar Rack Feeder 419 lbs.

Length Overall . . . . . . . . . . . . . . . .10’ Width Overall . . . . . . . . . . . . . . . .47” Height Overall . . . . . . . . . . . . . . .53” Feed Height . . . . . . . . . . . . . . . . .26” Depth . . . . . . . . . . . . . . . . . . . . . .9” Skid Height . . . . . . . . . . . . . . . . .17” Spacing Between Bars . . . . . . . . . . .12’

Order No. Description Weight035-50010 V Rack Feeder (5’) 278 lbs.

Length Overall . . . . . . . . . . . . . . . . 5’Width Overall . . . . . . . . . . . . . . . . 42”Height Overall . . . . . . . . . . . . . . . 54”Feed Height . . . . . . . . . . . . . . . . . 26”Depth . . . . . . . . . . . . . . . . . . . . . . 9” Skid Height . . . . . . . . . . . . . . . . . 17”

10’ SLANT BAR RACK FEEDERSPECIFICATIONS

27

Feed is certainly a premium these days which means it is impor-tant to reduce feed waste as much as possible. Powder River’sClassic Square Bale Feeder will allow you to conserve that feedby keeping cattle from trampling it into the ground. TheSquare Bale Feeder consists of 2-6’ Classic Feeder Panels and 2-10’ Classic Feeder Panels, a perfect size for one ton bales. The slant bar design keeps the heads of the cattle from pullingout as easily. This keeps any dropped feed inside the feeder.As cattle eat away from the bale they will increase pressure onthe panels. The Square Bale Classic Feeder will handle thatpressure. Powder River’s Classic Square Bale Feeder pins together in minutes with our popular pin and clip system.

Square Bale Feeder Order No. 040-00025

J 2-6’ Classic Feeder PanelsJ 2-10’ Classic Feeder PanelsJ 64” TallJ 13’-gauge Tubular FrameJ 5 Year Warranty

J Quick Pin & ClipConnecting System

J 1” schedule 40 slant barsJ 15” Solid sheeted bottom J Bar Spacing approximately

13” x 33”

FEATURES AND SPECIFICATIONS

Height . . . . . . . . . . . . . . . . . . . . . . . 61”Length Overall . . . . . . . . . . . . . . . . . 86”Width . . . . . . . . . . . . . . . . . . . . . . . 35”Distance between kick panels . . . . .121/2”Add SectionHeight . . . . . . . . . . . . . . . . . . . . . . . 61”Length Overall . . . . . . . . . . . . . . . . . 72”


051-07000 Elite Roper 470 lbs.051-07002 Automatic Elite 485 lbs051-07005 Add Section 353 lbs.

ELITE ROPER SPECIFICATIONS

28

RODEORODEOO

PROUD SPONSOR OF

ur rodeo equipment is as tough as those whouse it. From roping chutes for your backyard to complete arena systems for sanctioned

events, Powder River has the equipment and designexperts to help you develop the ideal Rodeo facility.

I would like to thank Powder River forthe tremendous support and job welldone at the College National FinalsRodeo. Their staff goes above andbeyond what is expected, and theirexpertise of their great product shows.We have even outfitted our arena withtheir updated timed event equipment,and a squeeze chute at our ranch.Great job guys and thank you onbehalf of the NIRA and myself. — Jim Dewey Brown, CNFR Arena Director

Elite Roper is the Official Roping Chute of the College National Finals Rodeo

Automatic Elite Roper Order No. 051-07002

Now you can open the Elite Roping Chute from almost anywhere withPowder River’s new wireless remote control. It’s as easy as pressing thebutton to release your calf or steer from the chute.

FEATURESJ Exact same chute as manual Elite RoperJ Wireless Remote Control that is small enough to put in your pocketJ Smooth and Quiet releaseJ Works from as far a 100 feetJ Requires 110v outlet

Manual Elite Roper Order No. 051-07000

POWDER RIVER CONGRATULATES THE2009 CNFR CHAMPIONS

Jake T. Wright, Men’s All-Around CowboyNikki J. Steffes, Women’s All-Around CowgirlBryan L. Martinat, Saddle Bronc ChampionRC C. Landingham, Bareback ChampionChad M. German, Bull Riding Champion

Cody Prescott, Tie Down Roping ChampionWyatt J. Smith, Steer Wrestling ChampionRyan J. VonAhn and Trevor B. Connolly,

Team Roping Champions, Rachel L. Tiedeman, Barrel Racing ChampionJessica N. Picchietti, Breakaway ChampionSarah A. Mulholland, Goat Tying Champion

ELITE ROPING CHUTE IS CNFR PROVEN• Smooth, quiet release for optimum animalperformance

• Eye-catching, striking two-tone color designcomplete with Powder River rodeo logos

• Super Durable Powder Coat provides a protective finish for years of use

• Choose between manual or automatic gaterelease

FEATURES J All new design J Competitively pricedJ Manually operated J Fully powder coatedJ Custom signage available on special order J Meets PRCA specifications

29

The spring-loaded gate lever latch creates a smoother,easier gate release, which allows the gate man aquicker and cleaner opening. When determiningright-hand or left-hand delivery, the animal’s headwill always be on the hinge end of the chute with the gate being on the side the animal will buck out.(Bucking Chute shown is a right-hand exit chute.)


051-00010 Right Hand 1st Section Bucking Chute 1463 lbs. 051-00011 Left Hand 1st Section Bucking Chute 1463 lbs. 051-00012 Right Hand Add Section Bucking Chute 1125 lbs. 051-00013 Left Hand Add Section Bucking Chute 1125 lbs. 051-00030 1st Section Stripping Chute 1401 lbs. 051-00031 Add Section Stripping Chute 1061 lbs.

BUCKING & STRIPPING CHUTE SPECIFICATIONS

Height Overall . . . . . . . .87”

Roll Gate Height Inside . .84”

Top of Gate/Panel . . . . .72”

Width Inside . . . . . . . . .32”

Length Inside . . . . . . . .96”

Widest Point (roll door). .63”

Bucking Chutes

ELITE ROPING ARENA

Order No. Qty Description021-01102 2 1600 Tube Panel 2’ x 64”021-01104 2 1600 Tube Panel 4’ x 64”021-01108 2 1600 Tube Panel 8’ x 64”021-01110 8 1600 Tube Panel 10’ x 64”021-01112 23 1600 Tube Panel 12’ x 64”021-01116 68 1600 Tube Panel 16’ x 64”033-16004 1 1600 Tube Gate 4’ x 52”033-16008 4 1600 Tube Gate 8’ x 52”033-16012 1 1600 Tube Gate 12’ x 52”033-16016 2 1600 Tube Gate 16’ x 52”051-07000 1 Elite Roper Chute051-07005 1 Elite Roper Add Section051-80095 1 PM Stripping Chute022-00516 12 Double Clevis022-00525 6 Panel Pin - 5/8” x 12”022-00620 4 Butterfly Clamp 2” PR Green051-80090 2 Roping Chute to Panel Adapter

300-foot x 150-footOrder No. 013-00100

Powder River builds both quality and strength into each piece of rodeo equipment that they sell, that makes College Rodeoproud to have them as a sponsor. The quality of their equipment, experienced staff that provides support, all contribute to abetter College National Finals Rodeo each and every year. It makes no difference if it is rough stock or timed event, theequipment makes for a safer environment for both livestock and contestant. That means a better performance for the specta-tors and contestants alike. We are very proud to use Powder River Equipment at the College National Finals Rodeo.Roger B. Walters, National Intercollegiate Rodeo Association- Commissioner College National Finals Rodeo-Manger

Super Classic Bull Bow Gates The 9-foot high Super Classic Bull Bow Gates can be used in permanent or portable rodeo arena systems. 60-inch SuperClassic Bull Gates are hung within the 9-foot high bow.

Super Classic Bull Gate60-inch Bolt Hinge w/Lever LatchGate Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70”

Bow Height . . . . . . . . . . . . . . . . . . . . . . . . . . . 108”Gate Frame . . . . . . . . . . . . . 1.66” O.D. 13-gauge TubeHorizontal Rails . . .Pentagonal 14-gauge High Strength

Order No. Description Dimensions Weight

028-00926 26” Bow Gate 1.66” O.D. 13-gauge Tube 87 lbs.028-00903 3’ Bow Gate 11/4” Sch. 40 Pipe 122 lbs.028-00904 4’ Bow Gate 11/4” Sch. 40 Pipe 131 lbs.028-00906 6’ Bow Gate 2” Sch. 40 Pipe 198 lbs.028-00908 8’ Bow Gate 2” Sch. 40 Pipe 239 lbs.028-00910 10’ Bow Gate 21/2” Sch. 40 Pipe 330 lbs.028-00912 12’ Bow Gate 21/2” Sch. 40 Pipe 377 lbs.

SUPER CLASSIC BULL BOW GATESSPECIFICATIONS


022-00103 3’ Panel 48 lbs.022-00104 4’ Panel 57 lbs.022-00106 6’ Panel 76 lbs.022-00108 8’ Panel 101 lbs.022-00110 10’ Panel 120 lbs.022-00112 12’ Panel 145 lbs.022-00114 14’ Panel 164 lbs.022-00116 16’ Panel 189 lbs.

SUPER CLASSIC BULL PANEL SPECIFICATIONSOverall Height . . . . . . . . . .70”Legs . . . . . . . . . . . . .10” HighFrame 1.66” O.D. 13-gauge Tube

Horizontal Rails, Pentagonal 14-gauge, High Strength

Vertical Stays (Quantity)– 8’ & 10’ (1), 12’ & 14’ (2), 16’ (3)


032-00704 4’ Gate 66 lbs.

032-00706 6’ Gate 85 lbs.

032-00708 8’ Gate 110 lbs.

032-00710 10’ Gate 129 lbs.

032-00712 12’ Gate 154 lbs.

032-00714 14’ Gate 173 lbs.

032-00716 16’ Gate 201 lbs.

SUPER CLASSIC BULL GATEW/LEVER LATCH SPECIFICATIONS

Overall Height . . . . . . . . .60” Frame 1.66” O.D., 13-gauge Tube

Horizontal Rails (5), 1.66” O.D.,Pentagonal 14-gauge High Strength

Hinge . . .1” x 12” Threaded-rodLatch . . . . .Double Piston Lever

Vertical Stays (Quantity) – 8’ & 10’ (1),

12’ & 14’ (2), 16’ (3)

Super Classic Bull PanelsMade especially for rodeo arenas, these 70-inch tall SuperClassic Bull Panels are constructed of the same heavy 14-gauge rails and 13-gauge frame material as our ClassicLine of panels. Square corners add safety to a sport that isknown for crossing the line. Our Super Classic Bull Bow Gateswill provide your corrals and arenas with the support theyneed without posts.

30

CLASSIC RODEO PANELS, GATES AND BOWGATES, PROVIDE A 1, 2, 3 PUNCH WITH HIGHTENSILE STEEL, PENTAGONAL RAILS, ANDFORMED DOUBLE SIDED STAYS• High Tensile Pentagonal Rails are made to be abused— our high tensile steel is 66% stronger than themore common “mild” steel round tube rail panels

• Simply better engineering, our Signature PentagonalRails are an incredibly stronger shape than round railand provide superior recoil which gives years ofintense use

• 70” tall — 6” taller than standard classic provides youadditional peace of mind that the “Bull Stops Here” at this panel or gate

• We are so confident in this panel we provide anunheard of 5 year limited warranty

31

10P

10P

10P

10P

10P

10P

10BG 10P 10BG

10P 10P

10P10P

10P

10P10P

10BG10P

10P

10P

10P 10P

10P

10P

10P10P 10BG

10P

10P10P

10P

10P

10BG10BG

10BG

10P12G

16P

16P

4P

10P 10P

10P10P

10P

10P

10P 10P

10P

10P

10P 10P

6P

8P 8G

10G

3G

10BG

6BG

3BG9P

3BG

10P

9P

6BG

6P

6BG

16P 16P 16P 16P 16P

16P 16P 16P 16P 16P

10P10P

12G

16P 12P

10P

12P

10P6BG

16P

10P

12P

10P

12P

10P

12P

16P

16P

16P

16P

16P

16P

16P

16P

16P

16P

6BG

16P

8CP

8CP

16P

4G

10P

4G

10P

10P

3P8P

8CP3P

3BG

8CP

26BG

14P

16P 16P16P10P 16P 16P 16P 16P 16P 16P 16P 10P10P

16P16P 16P6G 6G12P

16P

16P

16P

16P

10BG

16P

16P

16P

10BG

12P

4P

12P

4P

10BG 10P

10G10G

12P3BG

16P 16P10P16P

4BG4BG

10P 12P

6BG

10P

4P4P4G

ALLEYRG

ALLEYRG

ALLEYRG2-6" POSTS

4BG

10'

4P

4P

140-FOOT X 260-FOOT ARENA

26BG26BG

12P12P

16P16P

16P16P

16P16P4BG4BG

16P16P

16P16P

16P16P8P8P4BG4BG

12P12P

3P3P30P30P

30P30P

8P8P

8BG8BG12P12P

3P3P

10P10P

10P10P

10P10P10P10P

10P10P

6BG6BG

16P16P

8CP8CP 8CP8CP

4BG4BG10P10P4BG4BG

10P10P

10P10P

16P16P

12P12P8BG8BG

3P3P

8P8P

8BG8BG8CP8CP

3P3P

3BG3BG

8CP8CP

26BG26BG

3BG3BG

4BG4BG

16P16P

16P16P

16P16P

8P8P4BG4BG

3BG3BG

4BG4BG

4BG4BG16P16P

16P16P 8P8P 16P16P

10P10P

10P10P10P10P

10P10P

10P10P

10P10P

14P14P

14P14P

14P14P

14P14P

16G16G4P4P 4P4P

8P8P8P8P

10P10P10P10P

3P3P 3P3P

14G14G 14G14G

6P6P12BG12BG

14P14P

10P10P

14P14P

26BG26BG

6P6P

12BG12BG 10P10P10P10P

16P16P

16P16P

16P16P

16P16P

16P16P

16P16P

16P16P

16P16P

8BG8BG

8BG8BG

8BG8BG

16P16P16P16P

16P16P

16P16P16P16P

16P16P16P16P

16P16P8BG8BG

8BG8BG

16P16P16P16P16P16P

8BG8BG

8BG8BG

16P16P

16P16P16P16P

8BG8BG

8BG8BG

16P16P16P16P16P16P

16P16P

16P16P

8BG8BG

8BG8BG

16P16P

8BG8BG

6P6P

16P16P8BG8BG

8BG8BG

16P16P8BG8BG

8BG8BG

8BG8BG

16P16P

8BG8BG

16P16P

16P16P

16P16P

16P16P

16P16P

16P16P

16P16P

16P16P

12P12P 12P12P 12P12P12BG12BG

10P10P3BG3BG

12P12P12P12P

16P16P16P16P 16P16P 16P16P 16P16P 16P16P 16P16P 16P16P 16P16P 16P16P 16P16P 16P16P

16P16P 16P16P 16P16P 16P16P 16P16P 16P16P 16P16P 16P16P 16P16P 16P16P 16P16P 16P16P 16P16P 16P16P 16P16P

16P16P

16P16P

16P16P

16P16P

10P10P

12P12P

12P12P

12BG12BG

12BG12BG 10P10P 10P10P

6P6P

36BOW36BOW36BOW36BOW

36B36B36B36B

10P

14P

14P 14P 14G 14P 14P

14P14P14G14P

14P 14P14P 14P

14P14P14P14P

12P

30P3P

10P

30P

16P

16P

16P

16P16P

10P

4BG

4BG

8P

4BG

8BG

16P

16P

8P

10P

3P3BG

16P 8P

4BG

12P

14P

16P10P

10P

8BG 14P

12P

10P

10P

3P

3P

3BG

16P

8CP 4BG

14P

8CP

8CP

3BG

10P

10P

10P

14P14P

14P

8BG

8CP

6BG

14G

8P

4BG

3BG12P12P

16P

6P4BG

12P 4BG12P

12P

16P 4BG4P

16P

10P10P

8P

6BG

8P

4BG

10P

8P14P

14P14P3P14P14P14P

14P

14P

16P

3BG

4BG

8P

4BG

12P

4BG

10P

16P

16P

16P

8BG

8P

16P

8P

10P

8P

14P 14P

14P8BG

10P

10P

16P

12P

14P

10P

14P10P

10P

16P

14G

RODEO ARENA

*120-foot x 200-foot

BUCKING CHUTES

STRIPPING CHUTES

ROPING CHUTE

Order No. Quantity Description051-00010 1 New Bucking Chute RH051-00012 3 New Bucking Add Sect RH051-00030 1 New Stripping Chute051-00050 1 New Roping Chute051-00051 1 Roping Chute Add Section022-00116 20 Panel HD 16’ x 70” Sq.022-00114 35 Panel HD 14’ x 70” Sq.022-00112 10 Panel HD 12’ x 70” Sq.022-00110 20 Panel HD 10’ x 70” Sq.022-00108 11 Panel HD 8’ x 70” Sq.022-00106 1 Panel HD 6’ x 70” Sq.022-00104 1 Panel HD 4’ x 70” Sq.022-00103 5 Panel HD 3’ x 70” Sq.032-00714 4 Gate HD 14’ x 60” Sq L/L028-00908 5 Bowgate 8’ x 9’ Sq028-00906 2 Bowgate 6’ x 9’ Sq.028-00904 13 Bowgate 4’ x 9’ Sq.028-00903 5 Bowgate 3’ x 9’ Sq.019-00008 4 Calf Panel 8’ x 52”007-52080 1 S2K Alley Roll Gate007-52075 4 S2K Alley to Panel Adapt022-00516 30 Double Clevis



Order No. Quantity Description051-00010 1 New Bucking Chute RH051-00012 2 New Bucking Add Sect RH051-00011 1 New Bucking Chute LH051-00013 2 New Bucking Add Sect LH051-00030 1 New Stripping Chute051-00050 1 New Roping Chute051-00051 1 Roping Chute Add Section022-00116 49 Panel HD 16’ x 70” Sq.022-00114 1 Panel HD 14’ x 70” Sq.022-00112 10 Panel HD 12’ x 70” Sq.022-00110 59 Panel HD 10’ x 70” Sq.022-00108 4 Panel HD 8’ x 70” Sq.022-00106 2 Panel HD 6’ x 70” Sq.022-00104 5 Panel HD 4’ x 70” Sq.022-00103 2 Panel HD 3’ x 70” Sq.028-00910 11 Bowgate 10’ x 9’ Sq.028-00906 6 Bowgate 6’ x 9’ Sq.028-00904 3 Bowgate 4’ x 9’ Sq.028-00903 4 Bowgate 3’ x 9’ Sq.028-00024 3 Alley Roll Gate028-00026 1 Bowgate 26” x 7’032-00712 2 Gate HD 12’ x 60” Sq. L/L032-00710 3 Gate HD 10’ x 60” Sq. L/L032-00708 1 Gate HD 8’ x 60” Sq. L/L032-00706 2 Gate HD 6’ x 60” Sq. L/L032-00704 2 Gate HD 4’ x 60” Sq. L/L019-00008 4 Calf Panel 8’ x 52”022-05015 128 2” Post /70” with 2 Clevis

Order No. Quantity Description051-00010 1 New Bucking Chute RH051-00012 2 New Bucking Add Sect RH051-00011 1 New Bucking Chute LH051-00013 2 New Bucking Add Sect LH051-00030 2 New Stripping Chute051-00050 1 New Roping Chute051-00051 1 Roping Chute Add Section022-00116 83 Panel HD 16’ x 70” Sq.022-00114 6 Panel HD 14’ x 70” Sq.022-00112 11 Panel HD 12’ x 70” Sq.022-00110 24 Panel HD 10’ x 70” Sq.022-00108 7 Panel HD 8’ x 70” Sq.022-00106 5 Panel HD 6’ x 70” Sq.022-00104 2 Panel HD 4’ x 70” Sq.022-00103 6 Panel HD 3’ x 70” Sq.028-00912 11 Bowgate 12’ x 9’ Sq028-00908 21 Bowgate 8’ x 9’ Sq028-00906 1 Bowgate 6’ x 9’ Sq.028-00904 8 Bowgate 4’ x 9’ Sq.028-00903 4 Bowgate 3’ x 9’ Sq.028-00026 3 Bowgate 26” x 7’024-00308 4 Runway Bow 36” x 8’032-00716 1 Gate HD 16’ x 60” Sq L/L032-00714 2 Gate HD 14’ x 60” Sq L/L008-00030 1 Calf Alley Stop012-00011 1 Loading Ramp 14’ Complete022-00516 50 Double Clevis

* sizes are approximate

RODEO ARENA


RODEO ARENA


Powder River is anxious to assist you with all of your rodeo needs. Contact us for personal design assistance.

LOADING RAMP

BUCKING CHUTES

STRIPPING CHUTES

STRIPPING CHUTES

ROPING CHUTE

ROPING CHUTE


e've improved the standardhorse stall, giving you moredesign options to meet

individual needs. Every PowderMountain horse stall door, side or back is designed for a steel bottom,double-plywood, tongue and groovewood or vinyl. The 16-gauge steel bottom is available from Powder River,the other options are not.


055-11255 12' Front Bar Top, Sheeted Bottom w/Feeder 84" high x 144" long 386 lbs.055-11260 12' Front Bar Top, Sht. Btm., Feed Door only 84" high x 144" long 361 lbs.055-11263 12' Front 100% Bar Top, Sheeted Bottom 84" high x 144" long 352 lbs.055-11265 12' Front Bar Top, Open Bottom w/Feeder 84" high x 144" long 241 lbs.055-11270 12' Front Bar Top, Open Btm., Feed Door only 84" high x 144" long 216 lbs.055-11273 12' Front 100% Bar Top, Open Bottom 84" high x 144" long 207 lbs.055-11275 12' Panel Fully Sheeted 84" high x 144" long 395 lbs.055-11280 12' Panel Bar Top, Sheeted Bottom 84" high x 144" long 319 lbs.055-11285 12' Panel Bar Top, Open Bottom 84" high x 144" long 178 lbs.055-11290 12' Panel Frame only 84" high x 144" long 146 lbs.

Inside Dimensions: 12' x 12' Stall is 11'10" wide and 12' deep

Horse Stall Connectors

HORSE STALL SPECIFICATIONS

STALL FEATURESJ Available in 12-foot lengthsJ Available with or without feederJ 84 inches highJ Zinc rich primer coatJ 16-gauge steel frame constructionJ 18-gauge vertical barsJ 4-foot door slides open smoothly for

easy access

33

055-10055Horse Stall 4-way Connector

055-10050Horse Stall3-way Connector(Top and Bottom)

055-10140 Wood to PanelConnector(Top and Bottom)

055-10145Wall

Connector

HORSE STALLSHORSE STALLS

W


34

If you value your horses then it is time for the Powder Mountain 12’ x 12’ Value Shelter. The Value Shelter gives you the flexib-ility to create the equine housing that you desire. Connect runs or corrals (not included) either in front or behind the shelter. Builtwith 1.66 O.D. 16-gauge tubular frame and 1.66 O.D. 13/16-gauge trusses. 12’ x 12’ Add Sections and 2’ Patio Overhang Available.Connecting hardware included. (Plywood and roofing material not included.) (Shelter must be anchored, anchors not included.)

12 x 12-foot Value ShelterOrder No. 055-30002 (with wood) Order No. 055-30000 (w/o wood)

Pictured is one of the many Value Shelter options

Powder Mountain’s 3-Stall Value Package with wood (Order No. 055-30003)is an economical way to protect your horses from the elements. You can addruns (see photo below) to give your horses ample space. Roofing material isnot included with 3-stall package. 12’ Combo Fronts w/wood can be orderedseparately (Order No. 055-30145)

Value Shelter 2’ Patio OverhangOrder No. 055-30100

FEATURES AND SPECIFICATIONSJ Sides and Backs include tabs and hardware for

plywood (wood not included)J Shelter includes front support bow that can

remain for clamping panels to or be removed forinserting a combo gate/panel

J Butterfly clamps are included for easy assemblyJ Detailed instructions are included giving assembly,

anchoring, wood cutting information, etc.J HD trusses meet 30 lbs. per foot snow load ratingJ Add Sections are available for side by side sheltersJ 2’ Patio Overhang is available for additional

protection for your horses

3-Stall Value Shelter Package with 12’ x 24’ Runs(wood and roofing material not included)

The Patio Overhang will attach to your exist-ing shelter for an additional 2’ of protection.

HORSE SHELTERSHORSE SHELTERS

35

How to Calculate Your Round PenTo calculate the number of panels needed multiply the desired diameter by 3.14. This will determine the circumference.Divide the circumference by the length of the panels being used. This will equal the number of panels needed.

CIRCUMFERENCE: The distance around the circle

DIAMETER: Straight line passing through the center of the circle

ALL-AROUND ROUND PEN FEATURESJ Available in 15/8-inch, 18-gauge, or 2-inch, 16-gauge; 40 or 60-foot

J 12-foot panels ideal for round pens

J 15/8-inch panels available in 64-inch height

J 2-inch panels available in 72-inch height

J Connecting systems - pin and clip, wrap-around chain, butterfly clamps and unique 2-inch panel connectors

J Recessed in-line pipe stays eliminate sharp edges

J Bow Gate is 6 feet wide and 9 feet high allowing easy entry/exit into round pen

J Lever Latch on Bow Gate can be opened from horseback

15/8-inch, 18-gauge (All-Around) 60-foot Round Pen Order No. 011-00205

Panel Length 20' 25' 30' 35' 40' 45' 50' 55' 60' 65' 70' 75' 80' 85' 90' 95' 100'

10' 6 8 9 11 13 14 16 17 19 20 22 24 25 27 28 30 3112' 5 7 8 9 10 12 13 14 15 16 18 20 21 22 24 25 2616' 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

2-inch, 16-gauge (Super-Duty) 40-foot Round Pen Order No. 011-00210

DIAMETER OF HOLDING AREA (feet)

SUPER-DUTY ROUND PENFEATURESJ Arena-safe connectors insure a

quiet and safe round pen for yourhorses

J Recessed in-line vertical stayseliminate sharp edges

J Included 6’ wide bow gate has a 9’high bow for easy entry and exit

J The bow gate latch can be openedand closed from horseback

ROUND PENSROUND PENS

18-GAUGE (ALL-AROUND) HORSE PANELS

Powder Mountain Riding Arena

PANEL FEATURES & SPECIFICATIONSJ Available in 12-foot and 16-foot lengthsJ Choose from two horse-safe connector systems –

pin or chainJ 64 inches highJ Six evenly-spaced rails 83/8 inches apartJ 12-inch loop legs enable panels to skid easily

for movingJ 15/8-inch diameter tubingJ 18-gauge constructionJ 12-foot panel weighs 70 lbs., 16-foot panel

weighs 93 lbs.J In-line vertical stays add strength and safety

16-foot 18-gauge (All-Around) Panelswith Pin & Clip Connectors


015-00012 12' Panel Powder Mt. w/Pin & Clip 12' long x 64" high 70 lbs.015-00016 16' Panel Powder Mt. w/Pin & Clip 16' long x 64" high 93 lbs.015-20012 12' Panel Powder Mt. w/Chain 12' long x 64" high 70 lbs.015-20016 16' Panel Powder Mt. w/Chain 16' long x 64" high 93 lbs.

15/8-INCH, 18-GAUGE (ALL-AROUND) PANEL SPECIFICATIONS

owder Mountain's 18-gauge (All-Around) panels are heavier than mostutility panels yet are competitively priced. The panels are ideal forhorse corrals, round pens, training circles and backyard roping arenas.

HORSE PANELSHORSE PANELS

P

15/8-inch, 18-gauge (All-Around) Panels

18-GAUGE (ALL-AROUND) HORSE PANELS

36

POWDER MOUNTAIN 18-GAUGE HORSE PANELS • Weigh the difference — 70 pounds of steel in a 12-foot horse safe square corner panel

• Great for horse pens, training circles, round pensand roping arenas

• Versatile and easy to move• New Super Durable Powder Coat finish

2-INCH, 16-GAUGE (SUPER-DUTY) PANELS

37

2-INCH, 16-GAUGE (SUPER-DUTY) PANELS

he 2-inch diameter, 16-gauge (Super-Duty) 72-inchhigh panels complete our Powder Mountain panel line. These 2-inch panels are great for stalls, stud

pens and round pens. The unique connecting system (pictured below) guarantees a strong, tight, quiet and mostimportantly, safe connection. Level ground is necessaryfor a secure panel connection.

FEATURES AND SPECIFICATIONSJ 2-inch outside diameter 16-gauge tubing

J Six evenly-spaced rails 95/8 inches apart

J Measures 72 inches high

J In-line vertical stays add strength and safety

J Three connecting systems to choose from: Arena-Safe,Pin and Clip, and Butterfly Clamps

2-inch, 16-gauge (Super-Duty)Panel In-line Vertical Stays

2-inch Arena-Safe Connectors

BottomConnectors

TopConnectors

2-inch, 16-gauge (Super-Duty)12-foot x 12-foot Pen

2-inch, 16-gauge (Super-Duty), Loop LegPanel with Pin & Clip Connectors


015-50010 2" Powder Mt. Tube Panel 10' 10' long x 72" high 100 lbs.straight legs — Arena Safe



015-51010 2" Powder Mt. Tube Panel 10' 10' long x 72" high 98 lbs.w/butterfly clamp, straight legs



015-52010 2" Powder Mt. Tube Panel 10' 10' long x 72" high 104 lbs.w/pin & clip, loop legs



2" 16-GAUGE (SUPER-DUTY) PANEL SPECIFICATIONS

2" Butterfly Clamp

T

PM 2” SUPER-DUTY PANELS ARE THE VERY BEST HORSE PANEL• Weigh the difference - 116 pounds of steel in a 12-foot horse safe squarecorner panel

• Arena-safe connecting system is the safest panel connection availableanywhere for horses and riders

• 2” 16-Gauge 6’ tall, what a combination of strength and dependability foryears of use

• 2” In-line vertical stays add strength and safety making this panel theperfect choice

• New Super Durable Powder Coat finish

Powder Mountain Panel Accessories

Drop-pin and ClipConnectors

Chain ConnectorIn-line Vertical Stays

12-foot 15/8-inch, 18-gauge (All-Around) PanelPen with Shelter and FeederOur Portable Horse Shelter is a quick and affordable way to protect yourhorses from the elements. The included butterfly clamps allow you tohook the shelter to any of our 12-foot x 12-foot pens or even anyexisting 12-foot x 12-foot pen. (Roofing material is not included)

PEN FEATURES & SPECIFICATIONSJ Measures 12 feet x 12 feet J Two 8-foot uprights, two

7-foot uprightsJ Load bearing capacity of

30 lbs. per square footJ Six 14-gauge purloinsJ Two 14-gauge beamsJ Eight Butterfly clampsJ Weighs 385 lbs.

12- x 12-foot Horse Shelter Order No. 055-05000

12-foot 18-gauge (All-Around)panel with chain connectors

Single Clevis#022-00537

Double Clevis#022-00540

3-In-LineClevis

#022-00545

Powder Mountain's 5-Rail AG Panels come in 12'and 16' lengths. They are 5 rail and 54" tall, usingour popular formed stay for additional support.One less rail gives you a competitively pricedpanel great for a variety of uses such as:J Perimeter fencingJ Protecting oil or methane wellsJ Even corrals or round pens for gentle horses

NEW

10’ and 12’ Combo Panel available in5-Rail Order No. 027-11010 and 027-11012

38

NEW 5-Rail AG Panels

Powder Mountain 5-Rail AG PanelsOrder No. 015-11212 (12’) and 015-11216 (16’)

39

owder Mountain 6-rail (All-Around) gates include a chainlatch and two 10-inch threaded bolt hinges. The gatescan be hung using wood or steel posts. The 6-rail bow

gates measure 6-feet wide and the bow is 9-feet high with alever latch that can be opened and closed from horseback.

The 6-rail Super-Duty gates are 16-gauge, 2" tubing. They are60" high with two sturdy 12-inch threaded bolt hinges andinclude a chain latch.

The 6-rail combo panels are 12-feet long which includes a 6-footwide gate with an 8-foot high bow. The combo panels have alever latch like bow gates.

<12-foot x 60-inch, 2-inch, 16-gauge(Super-Duty) Gate

18-gauge (All-Around) Combo Gate with Panel

18-GAUGE (All-Around) GATE SPECIFICATIONS

Order No. Description Dimensions Weight027-20006 6' 18-gauge Powder Mt. Bow Gate w/Pin & Clip 6' wide x 9’ high 77 lbs.027-22006 6' 18-gauge Powder Mt. Bow Gate w/Chain 6' wide x 9’ high 75 lbs.027-50006 2" Powder Mt. Bow Gate 6', 16-gauge — Arena Safe 6' wide x 9' high 97 lbs.027-51006 2" PM Bow Gate 6' w/Butterfly Clamp, 16-gauge 6' wide x 9' high 97 lbs.027-52006 2" Powder Mt. Bow Gate 6' w/Pin & Clip, 16-gauge 6' wide x 9' high 97 lbs.

BOW GATE SPECIFICATIONS

12-FOOT COMBO PANEL SPECIFICATIONSOrder No. Description Bow Gate Dim. Weight027-20012 12' 18-gauge Powder Mt. Combo w/Pin & Clip 6' wide x 8' high 111 lbs.027-22012 12' 18-gauge Powder Mt. Combo w/Chain 6' wide x 8' high 109 lbs.027-50012 12', 2" 16-gauge Powder Mt. Combo — Arena Safe 6' wide x 8' high 150 lbs.027-51012 12' Combo Panel 2" w/Butterfly Clamp 6' wide x 8' high 150 lbs.027-52012 12' Combo Panel 2" w/Pin & Clip x 8' high 6' wide x 8' high 150 lbs.

< 12-footCombo Panel(2-inch, 16-gauge)

Threaded Bolt Hinge

Two 6-foot x 52-inch, 15/8-inch, 18-gauge (All-Around)Gates


034-10004 4’ x 60” Gate w/Bolt Hinge 45 lbs.034-10006 6’ x 60” Gate w/Bolt Hinge 61 lbs.034-10008 8’ x 60” Gate w/Bolt Hinge 82 lbs.034-10010 10’ x 60” Gate w/Bolt Hinge 100 lbs.034-10012 12’ x 60” Gate w/Bolt Hinge 106 lbs.034-10014 14’ x 60” Gate w/Bolt Hinge 135 lbs.034-10016 16’ x 60” Gate w/Bolt Hinge 153 lbs.

2-inch 16-GAUGE (SUPER-DUTY)GATE SPECIFICATIONS

Bow Gate andCombo Latch >

Order No. Description Dimensions Weight034-20004 4' Powder Mt. Gate 4' long x 52" high 28 lbs.034-20006 6' Powder Mt. Gate 6' long x 52" high 38 lbs.034-20008 8' Powder Mt. Gate 8' long x 52" high 50 lbs.034-20010 10' Powder Mt. Gate 10' long x 52" high 60 lbs.034-20012 12' Powder Mt. Gate 12' long x 52" high 70 lbs.034-20014 14' Powder Mt. Gate 14' long x 52" high 83 lbs.034-20016 16' Powder Mt. Gate 16' long x 52" high 93 lbs.

Bolt On Lever Latch

Order No. Description Weight032-03233 52" Bolt on Lever Latch (PM 15/8") 17 lbs.032-03235 60" Bolt on Lever Latch (PM 2") 18 lbs.

BOLT ON LEVER LATCH SPECIFICATIONS

HORSE GATESHORSE GATESP

FEATURES AND SPECIFICATIONSJ Available with or without legs

J Weighs 219 lbs. without legs, weighs 224 lbs. with legs

J Painted Powder River green

J Durable 14-gauge and 16-gauge steel construction

J 8 feet in diameter

Our Round Bale Feeder is perfect for horses. The 16-gaugedividers are braced with a 14-gauge stay that increasesstrength and durability. The bottom pan measures 8 feet indiameter and is rolled from one piece of 14-gauge sheet. The vertical dividers reduce hair loss due to rubbing.

Horse Round Bale FeederOrder No.s 040-05000 w/o legs, 040-05010 w/legs

5-foot V-Rack Horse Feeder Order No. 035-50000

Manger Feeder Order No. 055-00060Powder River Green, Order No. 055-00050

Hunter Green, Order No. 055-00065

The Powder Mountain 5-foot V-Rack Horse Feeder combinesstrength and innovative design resulting in a cost-effective,functional feeder.

FEATURES AND SPECIFICATIONSJ 14-gauge bunk and 16-gauge endsJ Overall height 68”, height to top of bunk 413/4”J Distance between feed bars 31/2”J Sturdy 13-gauge legs, with wide and stable skidJ Strong rack design with schedule 40 pipe and solid rodJ Bunk has strengthening rib preventing feed build-upJ Rolled-in bunk edges minimize feed lossJ Simple assembly with 3/8-inch bolts and nylon lock nutsJ Complete feeder weighs 278 lbs.

Powder Mountain Horse Manger Feeder can be used in manyapplications: barn, stall or pen. Its durable powder-coatedsteel construction and practical design ensures durability.

FEATURES AND SPECIFICATIONSJ All 16-gauge steel construction makes this feeder heavy

enough to stay hung on the fence panelJ Equipped with hanging brackets for use with up to 2-inch

diameter tube or rail panelsJ Holes are in bottom to allow water to drain to keep

feed dryJ Two holes are pre-drilled on back of feeder for mounting

the panel hanger brackets or for flush mounting to stall or wall

J Weighs 44 lbs.

HORSE FEEDERSHORSE FEEDERS

40

ROP ING AR ENAS

*Sizes are approximate

Powder MountainEconomy Arena125' x 200'

Powder MountainRoping Arena150' x 250'

Powder MountainDeluxe Arena156' x 300'

Order No.Quantity Description015-40002 2 Panel PM Med 2' x 64" P&C015-00008 2 Panel PM 8'015-00010 2 Panel PM 10'015-00012 29 Panel PM 12'015-00014 1 Panel PM 14'015-00016 21 Panel PM 16'034-20010 1 Gate PM 10'034-20012 3 Gate PM 12'051-07000 1 Elite Roping Chute051-07005 1 Elite Add Section051-80110 1 PR RC Tailgate Assembly051-80090 3 PM RC to Panel Adapter022-00540 6 Panel Pin - 5/8" x 12"022-00555 12 Double Clevis

(Posts not included)

Order No.Quantity Description015-40002 2 Panel PM Med 2' x 64" P&C015-00006 1 Panel PM 6'015-00008 2 Panel PM 8'015-00010 5 Panel PM 10'015-00012 41 Panel PM 12'015-00016 41 PM 16'027-20006 4 Bowgate 6' Powder Mtn034-20016 1 Gate Powder Mountain 16'051-07000 1 Elite Roping Chute051-07005 1 Elite Add Section051-80095 1 Stripping Chute051-80090 3 PM RC to Panel Adapter022-00540 7 Panel Pin - 5/8" x 12"022-00555 14 Double Clevis


<None>Order No. Quantity Description015-40002 2 Panel PM Med 2' x 64" P&C015-00006 1 Panel Powder Mountain 6'015-00008 2 Panel Powder Mountain 8'015-00010 5 Panel Powder Mountain 10'015-00012 42 Panel Powder Mountain 12'015-00016 61 Panel Powder Mountain 16'027-20006 3 Bowgate 6' Powder Mtn034-20010 2 Gate Powder Mountain 10'034-20016 1 Gate Powder Mountain 16'051-07000 1 Elite Roping Chute051-07005 1 Elite Add Section051-80095 1 Stripping Chute051-80090 3 PM RC to Panel Adapter022-00540 18 Double Clevis022-00555 9 Panel Pin - 5/8" x 12"


18-gauge Order No. 013-00000



HORSE RODEO & ROPINGHORSE RODEO & ROPING

41

POWDER CREEK RANCH PANEL SPECIFICATIONSHeight Overall . . . . . . . . . . . . . . . . . . . . . . . . . . 64”Loop Leg End Frame . . . . . . . . . . . . 15/8” O.D. TubingHorizontal Rails (6) . . . . . . . . . . . . 15/8” O.D. TubingVertical Stays . . . . . . . . . . . . . . 16-gauge formed stayConnectors . . . . . . . . . . . . . . . . . . . . . . Pin and Clip

Order No. Description # Stays Weight

015-30010 10’ Ranch Panel 1 47 lbs.015-30012 12’ Ranch Panel 2 62 lbs.015-30016 16’ Ranch Panel 3 81 lbs.027-30006 6’ Ranch Bow Gate 77 lbs.027-30012 12’ Ranch Combo 107 lbs.

POWDER CREEK PANEL FEATURESJ Hunter Green Powder Coat Finish

J 16-gauge vertical stays J Loop legsJ Pin and clip connectors J 6 rails, 1 5/8-inch tubing

42

Powder Creek Horse Manger FeederOrder No. 055-00065

owder River offers Powder Creek, one of the best all purpose panel lines in the market today. Panels are available in 10', 12', and 16' lengths. A 6' Bow Gate and a 12' Combo Panel are also available in

the Powder Creek line. These panels are ideal for perimeter fencing, roundpens, etc. The 16-gauge vertical stays give additional support to the tubular rails. The 64" height, along with our popular pin and clip connections, match up to our other panels. (Powder Creek panels are not designed for holding cattle.)

12-foot Powder Creek Panels

Powder Creek Horse Manger Feeder can be used in manyapplications: barn, stall or pen. Its powder-coated steelconstruction and practical design ensures durability.

POWDER CREEK RANCH PRODUCTSPOWDER CREEK RANCH PRODUCTS

P

POWDER CREEK PANELS — GREAT VALUE• Best all-purpose panel out there• 16-Gauge formed stays add substantial strength• Comes with Powder River’s popular pin and clip connectors

Powder Creek Round Pen (12-foot Panels Pictured)

Powder River is pleased toannounce Powder Creek RanchGates. They are excellent for pasture or driveway gates andPowder Coated Hunter Greenfor a better and more durablefinish. (6” lag screws/hingebrackets included.)

Create your desired size of round pen using Powder Creek 10-foot, 12-foot, or 16-foot panels and a 6-foot bow gate.

Powder Creek Ranch Gate

Powder Creek Panel Accessories POWDER CREEK RANCH GATE SPECIFICATIONSHeight Overall . . . . . . . . . . . . . . . . . . . . . . . . . . . 52”Frame . . . . . . . . . . . . . . . . . 1.66” O.D., 18-gauge tubeHorizontal Rails (5) . . . . . . . 1.66” O.D., 20-gauge tubeVertical Stays . . . . . . . . . . . . . . . 16-gauge formed stayLatch . . . . . . . . . . . . . . . . . . . . . 33” Chain w/KeeperOrder No. Description # Stays Weight034-50004 4’ Ranch Gate 0 23 lbs.034-50006 6’ Ranch Gate 0 30 lbs.034-50008 8’ Ranch Gate 1 39 lbs.034-50010 10’ Ranch Gate 1 46 lbs.034-50012 12’ Ranch Gate 2 54 lbs.034-50014 14’ Ranch Gate 2 64 lbs.034-50016 16’ Ranch Gate 3 71 lbs.

Single Clevis#022-00744

Double Clevis#022-00740

3-In-LineClevis

#022-00745

43

POWDER CREEK BOW GATEFEATURESJ 13-gauge bow frame is 9' high

J Gate uprights 18-gauge

J Gate consists of 6 - 1 5/8-inch O.D. tube rails

J Chain Latch

J Pin and clip connectors

J Hunter green powder-coat finishPowder Creek Bow Gate


027-30006 6’x9’ Bow Gate 69 lbs.

POWDER CREEK BOW GATESPECIFICATIONS

POWDER CREEK COMBO BOW GATE FEATURESJ Combo gate/panel is 6’ of bow gate and 6’ of panel

J 13-gauge bow is 8’ high

J Perfect for stalls or round pens

J Chain Latch

J Pin and clip connectors

J Hunter green powder-coat finish


027-30012 12’ Combo Gate/Panel 98 lbs.

POWDER CREEK BOW GATE &COMBO SPECIFICATIONS

Powder Creek Combo Bow Gate

Chain Latch

44

Powder Creek Ranch 12-foot Combo Gate/ Panels and 6-foot Bow Gates match up tothe Powder Creek Panels as well as all of our other panels. Both gates are 6-footwide. The Combo Gate Bow is 8-foot high.

DEER GATESPowder River’s deer gates aredesigned to keep those high jump-ing deer out of your hay stacks,orchards, backyards, or vineyards.They are available in a variety ofsizes, from a 6' access gate up to a12' drive-through gate.

DEER GATE FEATURESJ 92" high (over 8’ tall when hung)J 2" x 4" 8-gauge wire fillJ 16-gauge 15⁄8 OD tubingJ 2 chain latchesJ 3 - 12" long threaded bolt hingesJ Dip painted Powder River Green

Certain products such as: XL manual squeeze chute,gates, panels, feeder panels, and the homesteaderdeluxe are available in Hot Dipped Galvanized onspecial request. Please call 1-800-453-5318 for HotDipped Galvanized pricing.

HOT DIPPED GALVANIZED PRODUCTS

Order No. Dimensions Weight034-40006 6' x 92" 65 lbs.

034-40008 8' x 92" 87 lbs.

034-40010 10' x 92" 102 lbs.

034-40012 12’ x 92” 110 lbs.

DEER GATE SPECIFICATIONS

45

Model H-15 (12 tons per axle)

036-15708 . . . . . . . 7’5” x 8’

036-15710 . . . . . . . 7’5” x 10’

036-15712 . . . . . . . 7’5” x 12’

036-15714 . . . . . . . 7’5” x 14’

036-15808 . . . . . . . 8’ x 8’

036-15810 . . . . . . . 8’ x 10’

036-15812 . . . . . . . 8’ x 12’

036-15814 . . . . . . . 8’ x 14’

Model H-15 (with clean out)

037-15708 . . . . . . . 7’5” x 8’

037-15710 . . . . . . . 7’5” x 10’

037-15712 . . . . . . . 7’5” x 12’

037-15714 . . . . . . . 7’5” x 14’

037-15808 . . . . . . . 8’ x 8’

037-15810 . . . . . . . 8’ x 10’

037-15812 . . . . . . . 8’ x 12’

037-15814 . . . . . . . 8’ x 14’

Model H-20 (16 tons per axle)

036-20708 . . . . . . . 7’ 5” x 8’

036-20710 . . . . . . . 7’ 5” x 10’

036-20712 . . . . . . . 7’ 5” x 12’

036-20714 . . . . . . . 7’ 5” x 14’

036-20808 . . . . . . . 8’ x 8’

036-20810 . . . . . . . 8’ x 10’

036-20812 . . . . . . . 8’ x 12’

036-20814 . . . . . . . 8’ x 14’

Model H-20 (with clean out)

037-20708 . . . . . . . 7’ 5” x 8’

037-20710 . . . . . . . 7’ 5” x 10’

037-20712 . . . . . . . 7’ 5” x 12’

037-20714 . . . . . . . 7’ 5” x 14’

037-20808 . . . . . . . 8’ x 8’

037-20810 . . . . . . . 8’ x 10’

037-20812 . . . . . . . 8’ x 12’

037-20814 . . . . . . . 8’ x 14’

Model U-54 (25 tons per axle)

036-54808 . . . . . . . 8’ x 8’

036-54810 . . . . . . . 8’ x 10’

036-54812 . . . . . . . 8’ x 12’

036-54814 . . . . . . . 8’ x 14’

Model U-54 (with clean out)

037-54808 . . . . . . . 8’ x 8’

037-54810 . . . . . . . 8’ x 10’

037-54812 . . . . . . . 8’ x 12’

037-54814 . . . . . . . 8’ x 14’

Model U-80 (30 tons per axle)

036-80808 . . . . . . . 8’ x 8’

036-80810 . . . . . . . 8’ x 10’

036-80812 . . . . . . . 8’ x 12’

036-80814 . . . . . . . 8’ x 14’

esigned to meet H-15, H-20, U-54 and U-80 specifications, these cattle guards are used and recommended by state and federal agencies. These guards are available in lengths of 8 feet, 10 feet, 12 feet and 14 feet. They can be installed end-to-end to meet your road width requirements. The H-15 and H-20 are also

available in a 7-foot, 5-inch road length. Other options include a three rail clean out section (except on the U-80),end wings and steel posts.

Cattle Guard Accessories

036-00050 Cattle Guard End Wing Set

036-00090 Cattle Guard End Wing Post Set

036-00220 Cattle Guard Tornado Lock Set

Load Information

H-15 . . . . 12 tons per axle

H-20 . . . . 16 tons per axle

U-54 . . . . 25 tons per axle

U-80 . . . . 30 tons per axle

(includes a 30% safety factor for impact)

Standard cattle guards are painted green.Yellow painted cattle guards are availableby special order.

CATTLE GUARD SPECIFICATIONS

46

CATTLE GUARDSCATTLE GUARDS

D

For sustained profit in today’s livestock industry, producers’decisions must be based on reliable and easily obtainabledata. The Tru-Test Livestock Weighing System is theanswer. The system consists of two loadbars and an indica-tor, which attach to a Squeeze Chute (use adapter kit 002-00305). The scale requires a 12 volt DC power supplyor 110 Volt AC converter (002-00415).

Heavy Duty LoadbarsThe HD Series Loadbars are designed prima-rily for permanent installation under manu-al squeeze chutes. Their unique footingabsorbs the tremendous side loading forceswhich can occur, preventing damage to thescale. HD Loadbars are available in twolengths: 34 and 39 inches.

TRU-TEST SCALES

Allflex EIDStick ReaderOrder No. 002-00445

The Allflex RS250-45C Stick Reader is capable of reading bothhalf-duplex and full-duplex electron-ic identification (EID) tags. Designedto work with any Series 3000 indica-tor, the Allflex Stick Reader runs offthe same power source as the indica-tor. Simply plug the Stick Readerinto any Series 3000 indicator andbegin scanning EID tags.

Multi-purpose LoadbarsThe MP Series are designed to be easilytransported from site to site. Once you havea firm and level surface, it’s quick and easyto set them up. Coated to resist corrosion,our Loadbars will provide years of trouble-free service. MP Loadbars are available inthree lengths: 23, 32 and 39 inches

Ezi-Weigh 2 SystemOrder No. 002-00465

The Ezi-Weigh 2 System consists of MP600loadbars and an Ezi-Weigh 2 indicator. MP600loadbars are 23 inches long and have a totalweighing capacity of 4400-lbs. This system isdesigned for producers with a small number ofanimals who want to track animal perform-ance and calf weights quickly and easily.

ID 3000The newest entry level Electronic ID (EID) indicator to the Series 3000 range. With 10,000 head memory and 50 files, the ID3000can collect EIDs, visual tags, calculate average dailygain, and has a 12-digit repeatable code field forentering vaccines or other data. Its alpha-numerickeypad makes data entry fast and easy. • Up to 10,000 individual animal records• Fully EID compatible• Alpha-numeric keypad for naming files• Average daily weight gain function• Weighing statistics: total, count, minimum,

maximum and average• 3 way drafting• Automatic weight recording• Auto zero weight calibration

XR 3000The XR 3000 is the ‘crown jewel’ of the new 3000 range. It is the most advanced weighting indi-cator available. The XR 3000 allows you to actively monitor individual and group performance through the collection of a variety of lifetime and reoccurring animal data.• Includes same features as the ID3000 plus…• Up to 50,000 individual animal records• View animal histories, weights, and vaccination records• Build customized reports• Custom fields and repeat options provide fast entry of data frompre-set tables

• 8 life data fields available, visual tag, breed, DOB, sex, etc.• Interfaces with most animal management programs and electronic ID readers

• Download and upload animal data; print various reports

Aluminum Platform ScaleOrder No. 002-00470

The Tru-Test Aluminum platform is designedto work with the MP600 and GP600 Loadbarsmounted in an alley way. The AluminumPlatform is 7-foot, 4 inches long and 24-inches wide and weighs only 60 pounds.It is very easy to move to different locations.(Loadbars are not included.)

Order No. Length Capacity002-00364 (MP) 23” 4400 lbs.002-00365 (MP) 32” 6600 lbs.002-00370 (MP) 39” 6600 lbs.002-00382 (HD) 34” 6600 lbs.002-00375 (HD) 39” 6600 lbs.

LOADBAR SPECIFICATIONSOrder No. Description002-00363 Ezi-Weigh 2002-00441 XR 3000 w/battery002-00442 ID 3000

INDICATOR SPECIFICATIONS

47

EZIWEIGH 2Extremely simple to use: Autozero ensures that any accumulation of animal dirt on the platform or crate is zeroed out; Hold key retains the displayed weight after the animal has stepped off the platform/crate.

WEIGHING SYSTEMSWEIGHING SYSTEMS

The XHD10000 is the newest digital livestock scale systemfrom Tru-Test. With 10,000 lbs. total weighing capacity, the

XHD10000 is designed for permanent applications under manualor hydraulic squeeze chutes as well as large platform scales forweighing groups of animals. The XHD10000 consists of 4 bendingbeam load cells constructed of plated tool steel. The 4 load cellsconnect quickly and easily in a waterproof junction box. +/- 1%accuracy rating when installed on a level surface. Weighs in 5 lb.or 10 lb. resolutions. Strong and durable construction ensureslong term reliability. Like all Tru-Test scales, the XHD10000 locks on a stable weight within 3 – 6 seconds regardless of animal movement. The XHD10000 comes with a 2-year warranty. Compatible with all Tru-Test indicators.

XHD10000Order No. 002-00306

Butterfly Clamp

owder River’s Dog Kennels continue to improve to better meet the needs of you andyour dog. Some of the latest improvements include: Lockable slam latch, heavierhinge, center framed wire for reversibility, wider door opening to accommodate

portable kennels, mowers, etc. The kennels are constructed from all steel 18-gauge, 1.66-inchdiameter frame and 8-gauge wire. Two connectors are included with each kennel section.

10’ x 5’ Dog Kennel and 10’ x 10’ Dog Kennel

KENNEL FEATURESJ 18-gauge tubular frameJ 2" x 4" 8-gauge wireJ Quick and easy connecting systemJ Powder-coated finish

2-way Connector for Corners

3-way Connector(sold separately)

Dog Kennel Latch

Kennel Tops Optional (Sold Separately)Keep those climbing dogs in with Powder River’s Kennel Top. It can be attached in a matter of minutes. The top gives the kennel a variety of uses such as chickens, birds, monkeys, etc.


009-11100 Dog Kennel Complete 10’ x 10’ 312 lbs.009-11105 Dog Kennel Complete 10’ x 5’ 246 lbs.009-10110 Dog Kennel Front 10’ x 6’2” 90 lbs.009-10105 Dog Kennel Panel 10’ x 6’2” 71 lbs.009-10120 Dog Kennel Front 5’ x 6’2” 57 lbs.009-10115 Dog Kennel Panel 5’ x 6’2” 39 lbs.009-00035 Dog Kennel Connector n/a 1 lb.009-00050 3-Way Connector n/a 1.3 lbs.

NOTE: above components come with 2 connectors (009-00035)

009-11200 Dog Kennel Complete 10’ x 10’ 312 lbs.009-11205 Dog Kennel Complete 10’ x 5’ 246 lbs.009-10210 Dog Kennel Front 10’ x 6’2” 90 lbs.009-10205 Dog Kennel Panel 10’ x 6’2” 71 lbs.009-10220 Dog Kennel Front 5’ x 6’2” 57 lbs.009-10215 Dog Kennel Panel 5’ x 6’2” 39 lbs.022-00610 Butterfly Clamps n/a 1 lb.

NOTE: above components come with 2 butterfly clamps

009-00100 Dog Kennel Top 5' x 10' 55 lbs.009-00105 Dog Kennel Top 10' x 10' 110 lbs

DOG KENNEL COMPONENTSSPECIFICATIONS

48

DOGS & SMALL ANIMALSDOGS & SMALL ANIMALS

P

009-00095Kennel Top CenterMount Bracket

009-00090Kennel Top EndMount Bracket

009-00093Kennel Top In-Line

Connector

49

009-30000 Secure Dog Kennel 5’x8’ Brown009-30005 Secure Dog Kennel 7.5’x8’ Brown009-30015 Secure Dog Roof Structure 5’x8’ Black (Shade included)009-30020 Secure Dog Roof Structure 7.5’x8‘ Black (Shade included)

NEW SECURE DOG Kennel with Floor

SECURE DOG KENNEL FEATURES AND BENEFITSJ Vacuum-formed high density thermo plastic floor

eliminates the need for an expensive concrete pad

J Easy to clean and disinfect surface

J Surface minimizes foot, joint,and leg stress of pet

J Sides attach to floor forstrength and security

J Desert Tan color floor stays cool

J Comes boxed for extra protection

J Heavy gauge 2” x 4” Wire

J Safe and secure for dogs andother small animals

J Sturdy oval tube frame

J Self-Latching and lockable door

J Optional Roof Structure withshade cover (black)

J High quality Powder Coat Finish

Slam latch with pad lockcapability for extra security

Built in Floor – No moreDigging under the kennel

Snap-in connectors ensure solidconnection of panels to floor

Quick and easy to connectoptional roof structure

Kennel front & panels – 72” highKennel Dimension – 5’ x 8’ or 7.5’ x 8’ (approx.)

Save up to $400 on concrete with the included High-DensityPolyethylene Floor! Slip resistant surface with beveled edge.Resistant to oil, solvents and stains. Does not crack, chip or peel.


50

8-foot Small Animal Panel, 16-gaugeOrder No. 019-20008

This 8’ x 42” high small animal panel is ideal for confining yoursheep, hogs, calves, goats, etc. The panel is perfect for using atfairs. Each panel comes with a 40” long pin for connecting two,three or even four panels together.

FEATURES & SPECIFICATIONSJ 8’ long J 14-gauge vertical stayJ 42” high J Weighs 55 lbs.J Seven 1” square tube, 16-gauge railsJ 1/2 x 40” connecting pin included

8-foot Small Animal Combo PanelOrder No. 019-20020

The 8’ Small Animal Combo Panel gives you the ability tomake complete small animal pens. The combo panelincludes a 36" x 42" high, walk through gate, hung in a72" high bow frame for easy access to and from the pen.

FEATURES & SPECIFICATIONSJ 8’ long (5' panel, 3' bow gate) J 14-gauge vertical stayJ 42” high J Weighs 84 lbs.J Seven 1” square tube, 16-gauge railsJ 1/2 x 40” connecting pin included

WIRE FILLED PANELS AND GATES FEATURESJ Affordable way to confine sheep, calves, hogs,

chickens, etc.J 18-gauge frameJ In-line vertical stays (8’ - 16’)J 2” x 4”, 8-gauge wire fillJ Panels have quick, pin together systemJ Gates come with sturdy 12” long threaded

bolt hingesJ Gates come with chain latchJ Powder-coat finish 16-foot Wire Filled Panels

< 4-Foot Wire Filled GateOrder No. Description Weight

019-10004 4’ x 50” Wire Filled Panel 28 lbs.019-10006 6’ x 50” Wire Filled Panel 38 lbs.019-10008 8’ x 50” Wire Filled Panel 46 lbs.019-10010 10’ x 50” Wire Filled Panel 54 lbs.019-10012 12’ x 50” Wire Filled Panel 61 lbs.019-10014 14’ x 50” Wire Filled Panel 73 lbs.019-10016 16’ x 50” Wire Filled Panel 81 lbs.

WIRE FILLED PANELS SPECIFICATIONS

Order No. Description Weight034-30004 4’ x 48” Wire Filled Gate w/Bolt Hinge 28 lbs.034-30006 6’ x 48” Wire Filled Gate w/Bolt Hinge 38 lbs.034-30008 8’ x 48” Wire Filled Gate w/Bolt Hinge 46 lbs.034-30010 10’ x 48” Wire Filled Gate w/Bolt Hinge 54 lbs.034-30012 12’ x 48” Wire Filled Gate w/Bolt Hinge 61 lbs.034-30014 14’ x 48” Wire Filled Gate w/Bolt Hinge 73 lbs.034-30016 16’ x 48” Wire Filled Gate w/Bolt Hinge 81 lbs.

WIRE FILLED GATES SPECIFICATIONS

Wire Filled Double Gate

And Dog AssemblyRight Trip Handle

002-00231

And Dog AssemblyLeft Trip Handle

002-00232

Chute Ratchet300-10000

Chute Ratchet ‘04202-08240

With MountLeft Trip Assembly

002-00344

Stanchion Control Handle002-00237

002-00343

002-00341

Center Squeeze Control Handle002-00236

With MountRight Trip Assebly

002-00342

5/8" x 12"022-00523

Single Clevis022-00515

Double Clevis022-00516

3-In-Line Clevis022-00521

4 Way Clevis022-00527

Connector

022-00522Wood To Panel

With ClevisHD Pipe Clamp

022-00535 Connector1-5/8" Post to Panel

022-00528

Connector2-3/8" Post to Panel

Square Post Clamp

022-00526

007-52120

Pin And Chain

Righthand ChuteSpring

305-10000305-10005LefthandChute

Spring

005-003851-1/2" Square Tube To Clevis Adapter

Latch Plate032-32040

032-03211Gate Leveling Adapter

270 GateHinge Adapter

032-03210

51

YOUR L O CAL D EAL ER

© Powder River 2/10 Order No. 065-00400

P.O. Box 50758, Provo, Utah 84605Telephone: 1-800-453-5318 • Fax: 1-801-377-6927

www.powderriver.com

P.O. Box 50758, Provo, Utah 84605Telephone: 1-800-453-5318 • Fax: 1-801-377-6927

www.powderriver.com

For 5 years on classic line products, and one year on all other products, from the date of the original purchase, the manufacturer warrants to the first buyer who purchases and usesthe products for the products’ ordinary and intended purposes that the products shall be free from defects in material and in workmanship. There are no intended or incidental thirdparty beneficiaries. This warranty excludes and disclaims all product defects arising from ordinary wear and tear, failure to properly maintain and repair, and abuse. The manufac-turer excludes and disclaims any warranty of merchantability, warranty of fitness for a particular purpose, and any other warranty, either express or implied, regarding the products.

LIMITED REMEDY. The buyer’s sole and exclusive remedy for any breach of this limited warranty is to return the products to the manufacturer or manufacturer’s authorized represen-tative at buyer’s expense for a refund of the purchase price, or repair and replacement. The manufacturer has the exclusive right to select the remedy. The manufacturer excludesand disclaims liability for consequential damages, incidental damages, tort damages, strict liability damages, specific performance, and other damages and remedies.

NO MODIFICATIONS. This printed Limited Warranty is a complete statement of the manufacturer’s warranty. The printed terms of this Limited Warranty shall not be modified,amended, superseded, replaced or supplemented by any representations, promises or other statements made by salesmen, dealers, brokers, distributors, installers or others.

• L I M I T E D W A R R A N T Y •

NEW Powder river.com HAS A NEW, FRESH LOOK!We have also added many downloads to include:

• Product Flyers • Data Sheets • Assembly Instructions • Product Catalog

NEW HERDMasterTM

Enhanced Cattle Squeeze ChuteIntroducing the HERDMaster chute from POWDER RIVER, the leaders in livestock handling equipment. Taking on traits from its Powder River predecessors, theHERDMaster is strong, simple, and eff ective.

The Enhanced Center Squeeze is easy tooperate. The spring back squeeze handlestays out of your way while you are workingyour animals and releases are surprisinglyeasy. The Semi-Automatic Headgate is easyenough to let you work’em all day. Theheadgate’s wide opening and easy operationallows secure animal catches and smoothexits. The Load Assisted Tailgate lets youcontrol traffic with the flick of your wrist.

Patent Pending

These features all come together to give youan unparalleled working experience. Thischute will truly make you the HERDMaster.

HERDMASTER CHUTESPECIFICATIONS

HERDMaster Order No. 002-20200Total Length ......................103"Inside Length ......................91"Total Height ........................88"Inside Height.......................66"Widest Point ........................62"Base Width ..........................47"Head Gate Opening...............27"Weight ........................1,555 lb.

Documents

NEW PRODUCTS - stockyardsupply.comstockyardsupply.com/wp-content/uploads/2013/08/PR_Catalog_2010.pdfCHUTES & HEAD GATES he Powder River XL Manual Squeeze Chute with Right Side Exit