Upload
truongdan
View
246
Download
4
Embed Size (px)
Citation preview
CND, SHELLAC, VINYLUX, RETENTION+ and the logo are trademarks of Creative Nail Design, Inc.©2017 Creative Nail Design, Inc. #0237
NEW Shades!
NAIL DESIGN
GUIDE
.............................................................................................
Weekly Polish
1. P.E.P. the natural nail. (For details see our VINYLUX™ Weekly Polish System Step-by-Steps.)
2. Apply two thin layers of CND™ VINYLUX™ Viridian Veil.
3. Apply a thin layer of CND™ VINYLUX™ Eternal Midnight in a chevron, leaving a “V”-shaped moon of CND™ VINYLUX™ Viridian Veil exposed.
4. Mix a few drops of CND™ VINYLUX™ Mercurial with acetone in a mixing tray.
5. Use tweezers and a piece of cosmetic sponge to apply CND™ VINYLUX™ Mercurial where the CND™ VINYLUX™ Viridian Veil and CND™ VINYLUX™ Eternal Midnight meet.
6. Apply a thin layer of CND™ VINYLUX™ Weekly Top Coat.
CND™ SUPPLIES
CND™ VINYLUX™ Colors:• Viridian Veil• Eternal Midnight• Mercurial
CND™ VINYLUX™ Weekly Top Coat
ART SUPPLIES
Mixing TrayAcetoneCosmetic SpongeTweezers
Nocturnal Sky
1. P.E.P. the natural nail. (For details see our SHELLAC™ Brand Application & Removal Step-by-Steps.)
2. Apply a thin layer of CND™ SHELLAC™ Base Coat. Cure for 10 seconds in the CND™ LED Lamp.
3. Apply two thin layers of CND™ SHELLAC™ Viridian Veil. Cure each layer for one minute.
4. Apply a thin layer of CND™ SHELLAC™ Eternal Midnight in a chevron, leaving a “V”-shaped moon of CND™ SHELLAC™ Viridian Veil exposed. Cure for one minute.
5. Dispense a small amount of CND™ SHELLAC™ Mercurial in a mixing tray. Use tweezers and a piece of cosmetic sponge to apply CND™ SHELLAC™ Mercurial where CND™ SHELLAC™ Viridian Veil and CND™ SHELLAC™ Eternal Midnight meet. Cure for one minute.
6. Apply a thin layer of CND™ SHELLAC™ Top Coat. Cure for one minute. Wipe with 99% Isopropyl Alcohol to remove top film.
7. Apply CND™ VINYLUX™ Black Pool to the pattern in the stamping plate. Use the stamping scraper to remove excess color, roll stamper over pattern and apply to the nail.
8. Use a detail brush to apply CND™ SHELLAC™ Black Pool over the pattern to create a raised effect. DO NOT CURE.
9. Use spatula to sprinkle RETENTION+™ Sculpting Powder Clear over the pattern. Allow the powder to absorb into the uncured CND™ SHELLAC™ Black Pool and repeat until there is no longer any shine. Cure for one minute.
10. Wipe with 99% Isopropyl Alcohol to remove residue.
CND™ SUPPLIES
CND™ SHELLAC™ Base Coat
CND™ SHELLAC™ Colors:• Viridian Veil• Eternal Midnight• Mercurial• Black Pool
Velvet Veil
CND™ VINYLUX™ Colors:• Black Pool
CND™ SHELLAC™ Top Coat
RETENTION+™ Sculpting Powder Clear
CND™ LED Lamp
ART SUPPLIES
Mixing Tray
Cosmetic Sponge
Tweezers
:YOURS Loves Fee ylf02 Stamping Plate
Nail Stamping Scraper
Stamper
Detail Brush
Spatula
99% Isopropyl Alcohol
1. P.E.P. the natural nail. (For details see our SHELLAC™ Brand Application & Removal Step-by-Steps.)
2. Apply a thin layer of CND™ SHELLAC™ Base Coat. Cure for 10 seconds in the CND™ LED Lamp.
3. Apply two thin layers of CND™ SHELLAC™ Berry Boudoir. Cure each layer for one minute.
4. Apply a thin layer of CND™ SHELLAC™ Viridian Veil in a “V” shape down the center of the nail. If needed, refine the shape with the CND™ Gel Flat Oval Brush lightly moistened with 99% Isopropyl Alcohol. Cure for one minute.
5. Cut the iridescent Mylar tape into a long triangular shape and smaller triangular shapes identical in size.
6. Use tweezers to place the long triangle down the center of the nail followed by small triangles around the perimeter of the long triangle, alternating placement to create the desired design.
7. Press the tape smooth to the nail shape with the CND™ Gel Flat Oval Brush.
8. Apply a thin layer of CND™ SHELLAC™ Top Coat. Cure for one minute.
9. Wipe with 99% Isopropyl Alcohol to remove top film.
CND™ SUPPLIES
CND™ SHELLAC™ Base Coat
CND™ SHELLAC™ Colors:• Berry Boudoir• Viridian Veil
CND™ SHELLAC™ Top Coat CND™ ProSeries Gel Flat Oval Brush
CND™ LED Lamp
NightVision
ART SUPPLIES
Iridescent Mylar Tape
Scissors
Tweezers
99% Isopropyl Alcohol
1. P.E.P. the natural nail. (For details see our SHELLAC™ Brand Application & Removal Step-by-Steps.)
2. Apply a thin layer of CND™ SHELLAC™ Base Coat. Cure for 10 seconds in the CND™ LED Lamp.
3. Apply a thin layer of CND™ SHELLAC™ Viridian Veil. Cure for one minute.
4. Apply a thin layer of CND™ SHELLAC™ Viridian Veil in a marquise shape in the center of the nail. DO NOT CURE.
5. Apply teal multi-size glitter into the uncured CND™ SHELLAC™ Viridian Veil. Cure for one minute.
6. Apply a thin layer of CND™ SHELLAC™ Clearly Pink. Cure for one minute.
7. Use a striping brush with CND™ SHELLAC™ Lilac Eclipse to outline the marquise shape.
8. Apply a thin layer of CND™ SHELLAC™ Berry Boudoir to both outside edges of the nail. Cure for one minute.
9. Use a detail brush with CND™ SHELLAC™ Black Pool to outline both sides of the CND™ SHELLAC™ Lilac Eclipse. DO NOT CURE.
10. Use a detail brush with CND™ SHELLAC™ Studio White to highlight the inside edge of the CND™ SHELLAC™ Lilac Eclipse. Cure for one minute.
11. Apply a thin layer of CND™ SHELLAC™ Top Coat. Cure for one minute.
12. Wipe with 99% Isopropyl Alcohol to remove top film.
CND™ SUPPLIES
CND™ SHELLAC™ Base Coat
CND™ SHELLAC™ Colors:• Viridian Veil• Clearly Pink• Lilac Eclipse• Berry Boudoir• Black Pool• Studio White
CND™ SHELLAC™ Top Coat
CatEye
CND™ LED Lamp
ART SUPPLIES
Teal Multi-Size Glitter
Striping Brush
Detail Brush
99% Isopropyl Alcohol
1. P.E.P. the natural nail. (For details see our SHELLAC™ Brand Application & Removal Step-by-Steps.)
2. Apply a thin layer of CND™ SHELLAC™ Base Coat. Cure for 10 seconds in the CND™ LED Lamp.
3. Apply two thin layers of CND™ SHELLAC™ Lilac Eclipse. Cure each layer for one minute.
4. Apply a small amount of CND™ SHELLAC™ Berry Boudoir to the cuticle area and sidewalls. DO NOT CURE.
5. Use a detail brush moistened with 99% Isopropyl Alcohol to blend CND™ SHELLAC™ Berry Boudoir into CND™ SHELLAC™ Lilac Eclipse, feathering from the cuticle towards the center of the nail.
6. Apply a small amount of CND™ SHELLAC™ Hypnotic Dreams to the extension edge of the nail. DO NOT CURE.
7. Use a striping brush moistened with 99% Isopropyl Alcohol to blend CND™ SHELLAC™ Hypnotic Dreams into CND™ SHELLAC™ Berry Boudoir, feathering from the tip towards the center of the nail. Cure for one minute.
8. Apply a thin layer of CND™ SHELLAC™ Top Coat. DO NOT CURE.
9. Place rose gold crystals in the wet top coat to create the embellished design. Cure for one minute.
10. In a mixing tray, mix equal parts CND™ SHELLAC™ Top Coat and Wildflowers Rose Gold Chrome powder to form a thin paste.
11. Use a striping brush to apply a thin horizontal line of the rose gold blend to accent the design. Cure for one minute.
12. Wipe with 99% Isopropyl Alcohol to remove top film.
CND™ SUPPLIES
CND™ SHELLAC™ Base Coat
CND™ SHELLAC™ Colors:• Lilac Eclipse• Berry Boudoir• Hypnotic Dreams
CND™ SHELLAC™ Top Coat CND™ LED Lamp
Charmed
ART SUPPLIES
Detail Brush
99% Isopropyl Alcohol
Rose Gold Crystals
Mixing Tray
Wildflowers Rose Gold Chrome Powder
Striping Brush
To Create Gemstone:1. Press the desired faceted crystal or gemstone into the molding compound.
(Follow manufacturer’s directions for molding compound use.)2. Remove stone from the compound and pour a small amount of BRISA™
Gloss into the gemstone mold. Cover the entire impression with an even layer of BRISA™ Gloss. Cure for one minute in the CND™ LED Lamp. Repeat if needed for additional thickness.
3. Gently remove cured gem from mold. Use a cosmetic sponge to burnish Wildflowers Fuchsia Chrome powder onto the underside of the gem. Repeat two to three times to create desired color intensity.
4. Apply a thin layer of CND™ SHELLAC™ Lilac Eclipse over the Fuchsia Chrome powder. Cure for one minute.
5. Apply a thin layer of CND™ SHELLAC™ Top Coat. Cure for one minute.6. Wipe with 99% Isopropyl Alcohol to remove top film.
To Create Setting:1. Use two-part molding compound to make an oval ball shape.2. In a mixing tray, mix equal parts BRISA™ Gloss and Wildflowers Rose
Gold Chrome powder to form a thin paste.3. Create the pattern for the setting over the oval mold using a detail brush
and the rose gold paste. Cure for one minute.4. Seal and reinforce the setting with a detail brush and BRISA™ Gloss.
Cure for one minute.5. Wipe with 99% Isopropyl Alcohol to remove top film.6. Repeat this process for opposite side of the setting.
To Assemble:1. Adhere settings to both sides of the gem using adhesive.2. Adhere base of the setting to polished nail tip using adhesive and embellish
with rose gold crystals.
CND™ SUPPLIES
CND™ SHELLAC™ Colors:• Lilac Eclipse
CND™ SHELLAC™ Top Coat
BRISA™ Gloss
CND™ LED Lamp
CharmedJewel
ART SUPPLIES
Faceted Crystal or Gemstone
Two-Part Molding Compound
Wildflowers Fuchsia Chrome Powder
Cosmetic Sponge
99% Isopropyl Alcohol
Mixing Tray
Wildflowers Rose Gold Chrome Powder
Detail Brush
Adhesive
Rose Gold Crystals