Upload
others
View
18
Download
0
Embed Size (px)
Citation preview
ALBERDINGK BOLEY GmbH
Düsseldorfer Str. 53 · 47829 Krefeld, GermanyPhone +49 2151 528-0 · Fax +49 2151 573643
www.alberdingk.com
New solventNew solvent--free Polyurethane free Polyurethane dispersions for high performance dispersions for high performance
plastic coatingsplastic coatings
Author: Mr Guido MöllenbeckMay 2007 Page 2 of 33
Alberdingk Boley Product Portfolio
• Polyurethane dispersions• Acrylic emulsions• Hybrid systems and Copolymers• Waterborne UV-curable dispersions• VOC-free 100% Polyols (Albodur®)• Linseed- and Castor Oil
Author: Mr Guido MöllenbeckMay 2007 Page 3 of 33
Polyurethane Dispersions
• Polyester based PUD‘s• Polycarbonate based PUD‘s• Polyether based PUD‘s• PUD‘s based on aliphatic oils, e.g.
castor oil (CUR), linseed oil (LUR), soybean oil (SUR) and other oils
Author: Mr Guido MöllenbeckMay 2007 Page 4 of 33
Field of applications of PUD‘s
• 1- and 2-pack parquet flooring• High quality furniture coatings• Consumer electronics, e.g. cellphone
base- and topcoat• Car interior and exterior parts, e.g.
car refinish basecoat• Textile and leather applications
Author: Mr Guido MöllenbeckMay 2007 Page 5 of 33
Properties of PU-Dispersions
• High gloss level• Wide range of hardness and flexibility• Excellent transparency• High abrasion resistance• Crosslinking ability• Good chemical resistance• Deep drawing ability
Author: Mr Guido MöllenbeckMay 2007 Page 6 of 33
Cosolvent-free Alberdingk PUD‘s
Alberdingk Polyurethane dispersions
NMP-containing PUD‘s Cosolvent-free PUD‘s
U 325 U 3251U 3305 U 3300U 520 U 5200U 610 U 6100U 615 U 6150U 800 U 8001U 910 / U 911 U 9160U 915 U 9150 / U 9152U 930 U 9800
Author: Mr Guido MöllenbeckMay 2007 Page 7 of 33
Cosolvent-free Alberdingk PUD‘s
Alberdingk oil based Polyurethane dispersions and Hybrids
NMP-containing PUD‘s Cosolvent-free PUD‘s
CUR 60 CUR 601CUR 99 CUR 991
APU 1012 APU 10120APU 1014 APU 10140APU 1035 APU 10351APU 1060 APU 10600APU 1061 APU 10610APU 1062 APU 10620
Author: Mr Guido MöllenbeckMay 2007 Page 8 of 33
Polyurethane dispersions for plastic coatings
Author: Mr Guido MöllenbeckMay 2007 Page 9 of 33
Polyurethane dispersions for plastic coatings
Alberdingk® U 6150
• Solvent-free, aliphatic polycarbonatepolyurethane dispersion
• Solids: 37 – 39%• MFFT: approx. 0°C• pH-value: 7.5 – 9.0• Viscosity: 50 – 500 mPas• Elongation at break: 200%• pendulum hardness (König): approx. 65 s
Author: Mr Guido MöllenbeckMay 2007 Page 10 of 33
Polyurethane dispersions for plastic coatings
Alberdingk® U 6150
Features:• Excellent adhesion properties• Excellent UV resistance• Good wood warming
Field of application:• Basecoats• Plastic coating• Coatings on wood (interior/exterior)
Author: Mr Guido MöllenbeckMay 2007 Page 11 of 33
Alberdingk® U 6150 – FP 6150-1
Author: Mr Guido MöllenbeckMay 2007 Page 12 of 33
FP 6150-1 5 = best / 0 = worst
Test Chemicals Test Duration Test results(1-pack)
Test results(2-pack)
Ethanol (48%) 1h 3 5
Ammonia (10%) 1min 5 5
Water (deion.) 16h 5 5
Coffee (4%) 16h 3 3
Tea (1%) 16h 5 4
Red wine 5h 4 5
Cola 16h 5 5
Na2CO3 (10%) 2min 5 5
Author: Mr Guido MöllenbeckMay 2007 Page 13 of 33
Polyurethane dispersions for plastic coatings
Alberdingk® U 9160
• Solvent-free, self-crosslinking aliphaticPES/PC based polyurethane dispersion
• Solids: 32 – 34%• MFFT: approx. 10°C• pH-value: 7.5 – 8.5• Viscosity: 50 – 500 mPas• Elongation at break: 200%• pendulum hardness (König): approx. 80 s
Author: Mr Guido MöllenbeckMay 2007 Page 14 of 33
Polyurethane dispersions for plastic coatings
Alberdingk® U 9160
Features:• Outstanding abrasion resistance• Very good chemical resistance• Good balance of hardness and flexibility
Field of application:• 1- and 2-pack clear coatings for plastic• Basecoats• Coatings on wood
Author: Mr Guido MöllenbeckMay 2007 Page 15 of 33
Alberdingk® U 9160 – FP 9160-1
Author: Mr Guido MöllenbeckMay 2007 Page 16 of 33
FP 9160-1 5 = best / 0 = worst
Test Chemicals Test Duration Test results(1-pack)
Test results(2-pack)
Ethanol (48%) 1h 4 5
Ammonia (10%) 1min 5 5
Water (deion.) 16h 5 5
Coffee (4%) 16h 3 3
Tea (1%) 16h 5 5
Red wine 5h 4 5
Cola 16h 5 5
Na2CO3 (10%) 2min 5 5
Author: Mr Guido MöllenbeckMay 2007 Page 17 of 33
Polyurethane dispersions for plastic coatings
Alberdingk® U 9800
• Solvent-free, aliphatic polyesterpolyurethane dispersion
• Solids: 34 – 36%• MFFT: approx. 30°C• pH-value: 7.5 – 8.5• Viscosity: 20 – 300 mPas• Elongation at break: < 50%• pendulum hardness (König): approx. 130 s
Author: Mr Guido MöllenbeckMay 2007 Page 18 of 33
Polyurethane dispersions for plastic coatings
Alberdingk® U 9800
Features:• Extreme hardness & scratch resistance• Boiling water resistance as 2-pack formulation• Excellent chemical resistance
Field of application:• Parquet coating• PVC flooring• General wood coatings• Highly resistant plastic coatings
Author: Mr Guido MöllenbeckMay 2007 Page 19 of 33
Alberdingk® U 9800 – FP 9800-1
Author: Mr Guido MöllenbeckMay 2007 Page 20 of 33
Alberdingk® U 9800 – FP 9800-2
Author: Mr Guido MöllenbeckMay 2007 Page 21 of 33
FP 9800-1 / FP 9800-2
Application: Cellphone coating
FP 9800-2 Topcoat
FP 9800-1 Basecoat
Author: Mr Guido MöllenbeckMay 2007 Page 22 of 33
FP 9800-1 / FP 9800-2 5 = best / 0 = worst
Test Results(2-pack) Test Conditions
Hot-Water resistance After 1h 5
Blocking resistance After 7h 5
Crockmeter cloth rubbing 5 After 100 double rubs withMethanol, load 1000g
Suntan Lotions
Nivea Sun Spray SPF 20 5
ISA Knox SPF 45 4-5
Sun Light Cream SPF 39 4-5
Tested for 24h at 70°C
Tested after 24h drying
Author: Mr Guido MöllenbeckMay 2007 Page 23 of 33
Polyurethane dispersions for plastic coatings
Alberdingk® APU 10120
• Solvent-free, aliphatic polyester poly-urethane / acrylic hybrid dispersion
• Solids: 44 – 46%• MFFT: approx. 15°C• pH-value: 7.0 – 8.5• Viscosity: 20 – 200 mPas• Elongation at break: < 50%• pendulum hardness (König): approx. 50 s
Author: Mr Guido MöllenbeckMay 2007 Page 24 of 33
Polyurethane dispersions for plastic coatings
Alberdingk® APU 10120
Features:• Superior adhesion properties to ABS,
PC, ABS-PC and other plastic substrates• Fast water resistance
Field of application:• Primer for plastics• Primer for MDF• Basecoats
Author: Mr Guido MöllenbeckMay 2007 Page 25 of 33
Alberdingk® APU 10120 – FP 10120-7
Author: Mr Guido MöllenbeckMay 2007 Page 26 of 33
FP 10120-7 5 = best / 0 = worst
Test Substrates Results Test Conditions
ABS Gt 0
PC Gt 0
ABS-PC Gt 0
PA-66 Gt 0
ABS Gt 1
PC Gt 0
ABS-PC Gt 0
PA-66 Gt 0
Tape peel-off
Cross hatch cut, 100µm wet
Drying time: 2h at 70°CAdhesion
(according to ISO 2409)
Author: Mr Guido MöllenbeckMay 2007 Page 27 of 33
Polyurethane dispersions for plastic coatings
Alberdingk® APU 10610
• Solvent-free, self-crosslinking, aliphaticpolyurethane / acrylic hybrid dispersion
• Solids: 33 – 35%• MFFT: approx. 55°C• pH-value: 7.0 – 8.0• Viscosity: 20 – 200 mPas• Elongation at break: n.a.• pendulum hardness (König): approx. 80 s
Author: Mr Guido MöllenbeckMay 2007 Page 28 of 33
Polyurethane dispersions for plastic coatings
Alberdingk® APU 10610
Features:• Outstanding abrasion resistance• High level of chemical resistance• Good wood warming effect• Excellent adhesion on Hard-PVC
Field of application:• Coating for PVC window frames• Furniture coatings• Varnishes for 1- and 2-pack wood flooring
Author: Mr Guido MöllenbeckMay 2007 Page 29 of 33
Alberdingk® APU 10610 – FP 10610-4
Author: Mr Guido MöllenbeckMay 2007 Page 30 of 33
Alberdingk® APU 10610 – FP 10610-4
Application: PVC Window frames
Non-exposed lacquer
After 1000h QUV 340nm
Author: Mr Guido MöllenbeckMay 2007 Page 31 of 33
FP 10610-4 5 = best / 0 = worst
Test Results Test conditions
20% at 60° 56% at 85° Origin
13% at 60° 62% at 85°
After 1000h QUV 340nm
Adhesion (PVC) Gt 0 / Gt 0 Origin / after QUV
Blocking resistance 5 1000g load/cm2 , 16h at 50°C
Water resistance 5 72h storage underwater
Gloss
Author: Mr Guido MöllenbeckMay 2007 Page 32 of 33
THANK YOUTHANK YOU
FOR YOUR ATTENTION!FOR YOUR ATTENTION!
For further questions, please feel free to contact For further questions, please feel free to contact us on the telephone number or eus on the telephone number or e--mail below:mail below:
Phone +49 2151 528Phone +49 2151 528--00
EE--mailmail: : newproducts@[email protected]
Author: Mr Guido MöllenbeckMay 2007 Page 33 of 33
The aforesaid information is based on our present state of knowledge and shall inform about our products and their application possibilities. It is not intended to assure certain characteristics of the products and their suitability for precise application fields. Products including “VP” in their label are trial products during test stage. For these products Alberdingk Boley is only able to provide preliminary characteristics without obligation. Please consider possible industrial propertyrights. Subject to change without prior notice. ALBERDINGK®
and ALBODUR® are registered trademarks of ALBERDINGK BOLEY GmbH or an affiliate thereof in one or more, but notall, countries. Possible trademark rights of third-partyproducts mentioned have to be observed.
Disclaimer