Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Application guide for Grabo LVT dry back floor coverings
Grabo PlankIT is a long lasting flooring solution due to its durability against impacts, stains and scratches thus it is a perfect choice for shops, offices, hotels, restaurants or any other hospitality areas.
Our product has iGuard surface coating with low maintenance requirement.
Due to it's glass fibre reinforcement Grabo PlankIT is a dimensionally stable LVT flooring with sound insulating properties and warm underfoot feeling.
Its flexibility provides ecomonic, easy and quick installation.
THE NEW GRABO LVT
IS INSPIRED BY NATURE,
MANUFACTURED WITH
PHTHALATE FREE TECHNOLOGY
AND PROVIDES AN
ENVIRONMENTALLY FRIENDLY
FLOORING SOLUTION
FOR THE USERS.
ECOLOGICALFORMULA
GRABOPLANKIT
MADE INEUROPE
GRABO
GENDRY
PLANKIT
BA
ELIS
H
WE
STE
RLIN
G
VAR
YS
GE
ND
RY
YG
RITTE
TAR
LY
GR
EY
JOY
BO
LTON
WA
LDE
R
BR
IEN
NE
305 × 610Tile size
mm185 × 1220
Plank size
mm~2.7m²Qtty/Box
12 PIECESWOOD
NATURAL WOOD STRUCTURE
PLANK-IT
STONENATURAL STONE
STRUCTURE
PLANK-IT
~2.2 m²Qtty/Box
12 PIECES
23
THICKNESS EN ISO 24346
WEAR LAYER EN ISO 24340
2.5 mm
0.55 mm
TOTAL WEIGHT EN ISO 23997 4.0 kg/m²
PLANK SIZE | WOOD EN ISO 24346 185×1220 mm
PLANK SIZE | STONE EN ISO 24346 305×610 mm
CONSTRUCTION Luxury Vinyl Tile with iGuard Surface
CLASSIFICATION
PERFORMANCE
EUROPEAN CLASSIFICATION EN ISO 10582 class: 33/42
BINDER CONTENT EN ISO 10582 Type I.
RESIDUAL INDENTATION EN ISO 24343 max. 0.1 mm
DIMENSIONAL STABILITY EN ISO 23999 max. 0.15 %
CURLING EN ISO 23999 max. 2 mm
ABRASION GROUP MSZ EN 660-1 class: T
FIRE RESISTANCE EN 13501-1 class: Bfl-s1
EN 13893 DS
ELECTRICAL PROPERTIES EN 1815
ISO 8302
max. 2 kV / Antistatic
LIGHT FASTNESS EN ISO 105-B0 grade 6
CHEMICAL RESISTANCE EN ISO 26987
ASTM F925
HYGENIE bacterial resistant
CASTOR CHAIR RESISTANCE EN 425 / ISO 4918
ENVIRONMENTAL ATTRIBUTES solvent and phthalate free
CONTENT OF PCP EN 12673 does not contain
SURFACE TREATMENT iGuard PUR Surface / Easy cleaning
FORMALDEHIDE EMISSION ENV 717-1 E1 (no emission)
VOC pass
CE MARKING EN 14041
THERMAL RESISTANCE 0.014 m²K/W
SLIP RESISTANCE
SPECIFICATION
GRABOPLANKIT
LUXURYFLOOR COVERING MANUFACTURERS LTD.H-9023 Győr, Fehérvári út. 16/b. Telefon: (+36) 96 506-100
www.graboplast.com
42
33
GLASS FIBREREINFORCEMENT
46
40
2.5 mm
0.55 mm
97 4.0 kg/m²
46 185×1220 mm
46 305×610 mm
Tile with iGuard Surface
82 class: 33/42
82 Type I.
43 max. 0.1 mm
99 max. 0.15 %
99 max. 2 mm
0-1 class: T
class: Bfl-s1
DS
max. 2 kV / Antistatic
-B0 grade 6
87
sistant
O 4918
phthalate free
does not contain
Surface / Easy cleaning
E1 (no emission)
pass
0.014 m²K/W
6 506-100
VINYL TILE FLOORING
Thickness
Wear layer
2.5 mm
0.55 mm
www.facebook.com/graboplast APPLICATION GUIDE FOR GRABO LVT DRY BACK FLOOR COVERINGS
Application guide for Grabo LVT dry back floor coverings
Grabo commercial and residential dry back luxury vinyl tiles and planks are highly wear resistance, aesthetic, waterproof floor coverings with naturalistic texture. Keeping the recommendations to the installation and cleaning you will be satisfied with our products for a long time.
1. Subfloor
Subfloor must have excellent quality, must be properly prepared and needs to be hard, solid, stable, plain, levelled, clean and dry. Wet content max. 1,8 CM% in case of cement-es-trich subfloor.
2. General instructions for before installation
All flooring materials and the adhesive should be acclimatized to the jobsite temperature conditions for a minimum 24 hours prior to beginning of the installation. Ideal jobsite temperature 18-25℃. You must check before installation the colour compliance and surface. Use same batch inside the room.
Suitable subfloor-types:
• concrete | cement • anhydrite • plywood • stone • terrazzo • ceramic • solid PVC
Do not install over
• carpet • cushioned vinyl • wooden parquet • laminate or other floating floor • asphalt and bitumen
Application guide for Grabo LVT dry back floor coverings
3. Adhesive
Adhesives recommended: pressure sensitive, water based acrylate glue, like Henkel Ceresit K 188E or Uzin KE 2000S or Mapei Ultrabond Eco 4LVT or other brands equivalent with these. Consumption of glue: cca. 250 gr/m2 / spatula A1 in case of absorbent sub-floor and cca. 200 gr/m2 / spatula A4 in case of non-absorbent sub-floor. In case of wet areas use 2-component PUR adhesives, like Henkel Ceresit R 710, Uzin KR 430, Mapei Adesilex G19.
4. Laying on well prepared, levelled plain subfloors
• LVT planks and tiles are to be installed generally parallel to the main light source. • Measure the size of the room and mark the straight starting line of the installation.
CAUTON! For best result use a steel ruler to start first row. The distance of the starting line from the deepest part of the wall should be minimum the width of the plank minus 2-3 cm, or multiple of the width of the plank minus 2-3 cm.
• Coat the adhesive on the subfloor with the spatula, coated surface should be practically max. 3-4 rows at the same time and wait until the adhesive will be dry. Make finger test! Follow the instructions of the glue manufacturer.
• Plank LVT should be installed by offsetting method. Starting on the starting line, place the plank pieces side by side, glue them on the subfloor, and closely fit the edges of the planks to each other. Roll down the plank glued down by hand with cork rubber. If the last plank is longer then needed, mark and cut the plank installing the cut end next to the wall.
• The remainder of the plank can be used to start the next row if its length is minimum 30 cm.
• After gluing roll down well the planks with a steel roller 50-70 kg in all direction, forward and back and diagonally.
• Let 2-3 mm dilatation gap at the walls. • Prepare the skirting at the walls. Skirting can be the same LVT, or
wood, or metallic, which is in harmony with the design of LVT. • Use silicone seals at the joints of LVT and skirting around the walls.
Application guide for Grabo LVT dry back floor coverings
5. Cleaning and maintenance
Basic and periodical cleaning by machine Remove solid dirt from the surface by sweeping or vacuum-cleaning. Tools: alkaline cleaning detergent, mono-disc cleaning machine with red pad and damp sweeping equipment.
Technology of basic/periodical cleaning: The cleaning solution should be dispersed on a surface of 5-10 m2 area should be scrubbed after an acting time of 10-15 minutes, then the cleaning agent should be absorbed, the surface should be rinsed with clean water, and lastly, the water should be absorbed again. The periodical cleaning should be done with a frequency according to the grade of uses.
Application guide for Grabo LVT dry back floor coverings
Daily cleaning Remove solid dirt from the surface by sweeping or vacuum-cleaning then make wet cleaning manually or with a mono-disc machine with white pad.
Manual wet cleaning: Tools: mop, (microfiber mop is the best), damp sweeping equipment, cleaning agent (generally neutral or light alkaline detergent) Cleaning should be performed with the two-bucket method.
Mechanical wet cleaning: For daily mechanical cleaning use mono-disc cleaning machine with white pad. Use neutral or light alkaline cleaning agent. Never use abrasive products and any material that risks damaging of the surface. Never use rubber caps on furniture legs.
Recommended cleaning agents: Manufacturers / Products: Werner&Mertz GmbH / TANA (Innomat,Tana) and Dr. Schutz (PU Cleaner, Elatex) Basic and periodical cleaning with machine: Innomat dilution 3% or PU Cleaner dilution 10% Daily machine cleaning: Innomat dilution 0,5% or PU Cleaner dilution 0,5% Daily manual cleaning: Tana SR 13 0,5-1% dilution or PU Cleaner 0,5% dilution Stain removal: Tana Sprinter or Elatex
Other similar cleaning agents can be used as well.
6. Underfloor heating
The surface temperature of the subfloor should never exceed 28 ℃. Switch off the underfloor heating system 48 hours before starting the installation of LVT and leave it off at least 48 hours after installation. You can find detailed information on the website www.graboplast.com or contact the dealer.