Upload
buixuyen
View
215
Download
0
Embed Size (px)
Citation preview
NEWS LETTER Page No.
1
SAEINDIA Automotive Board organized the 6th
Automotive Round Table spearheaded by SAEINDIA
Northern Section and the program was conducted
on 14th July at Le Meridien Gurgaon. It was hosted
by Siemens PLM Limited. The program was well
attended by Industry professionals drawn from
diverse segments of the Automotive Industry
including Managing Committee members Mr.Balraj
Bhanot, Ms.Pamela Tikku and Mr.I V Rao (Panelist)
and Mr.Suman Bose, MD of Siemens India.
The program began with welcome address by
Dr.Arunkumar Sampath who also touched briefly
on the importance of the topic and the need to
brainstorm for addressing the challenges posed by
Government regulations with a limited time frame
to comply with it. He also mentioned this is 3rd in
the series of ART, second time in succession jointly
organized along with Siemens PLM. The objective is
to analyse the industry trends and evolve
appropriate action plan to move forward.
Mr.Purushotam Panda, VP, MSIL in his keynote
address pointed out the complexity of the tasks
involved and how a large volume manufacturer
with multiple products in its range like Maruti will
have to grapple with the challenges in compliance
within the limited time frame. He explained the
difficulties arising from multiple sequenced
regulations with varied requirements like co2, RDE
and safety adding to complexity of BS VI.
20 NEWS LETTER
ISSUE
Dr. Christian Teich, VP, R&D Bosch India Ltd.
made the second keynote presentation on
“Impact of upcoming emission and safety
regulations to auto suppliers in India”. In
essence: The fast sequence of fundamental new
regulations calls for disruptive change of
technology approach. To meet the new BS VI
emission norms a holistic optimization of the
engine-, combustion, fuel injection, air and
exhaust system of a combustion engine has to
be performed to enable lowest emissions and
best performance at good value proposition.
Challenge is the high innovation degree of the
technology changes and the short remaining
time span of less than 3 years. OEM’s as well as
automotive suppliers have to adapt their
portfolio in a fast manner, R&D resources
should be increased and competencies have to
be built up. No doubt - the fast introduction
speed is putting the automotive industry under
pressure but the disruptive technology change
includes the chance to re-define actively future
mobility: more efficient, safer and with new
opportunities for exports. Precondition for
success is a good cooperation between OEM’s
and suppliers.
There were two presentations from Siemens on
their preparedness to help Industry in
compliance with BS VI regulations in terms of
products, services, simulation software etc.
Upcoming Major Events
iTEC 2017
AWIM 2017
BAJA 2018
FISITA 2018
Automotive Round Table (ART)
Contents
SAEINDIA Events P.1
Southern Section P.7
Bangalore Section P.12
Western Section P.13
Northern Section P.19
NE W S L ET T ER P a g e N o .
2
Mr. Sanjay Nibhandhe Co-Chair, Sections Board
Mr. S. Radhakrishnan Co-Chair , Membership Board
Representing SAE International Dr. David. L. Schutt CEO, SAE International Mr.Murli M. Iyer Executive Global Advisor, SAE International
Dr.R.K.Malhotra President
Dr.Aravind Bharadwaj Immediate Past President
Dr. Bala Bharadvaj Sr. VP & Chair, Finance Board & Aerospace Board
Mrs. Rashmi Urdwareshe VP & Chair Membership Board
Mr. I.V.Rao VP & Chair, Engineering Education Board
Mr. Sanjay Deshpande Secretary
Dr.G.Nagarajan Treasurer & Co Chair Engineering Education Board
Prof. Prakash Joshi Member
Dr. Arunkumar Sampath VP, Chair Automotive Board & Vice Chair Finance Board
Mr. N.Balasubramanian Chair , Meetings and Exposition Board
Mr. P. Panda Co-Chair, Meetings and Exposition Board
Mr. Nitin Agarwal Chair, Off- Highway Board
Com.Rakesh B.Verma Co-Chair, Off Highway Board
Mr. Prakash Sardesai Chair, Professional development Program Board
Dr.R.Venugopal Co-Chair, Professional development Program Board
Mr. Balraj Bhanot Chair, Development Board
Dr. K.P.Murthy Co-Chair, Development Board
Dr.Sudhir Gupte Chair, Publications Board
Ms. Pamela Tikku Chair, Sections Board
SAEINDIA Managing Committee Members 2016 - 2018
Presented by SAEINDIA
Publications Board
Dr.Sudhir Gupte
Chairman
Mr. Asit Kumar Barma
Vice Chair
Mr. Vasanth Kini
Member
Mr. Rajesh Kumar
Member
Mr. Saravanan Natarajan
Member
Mr. Dhananjayan
Member
Dr. Vijaykanthan Damodaran
Member
Mr. Deepak Sawkar
Member
Mr. Jitendra Malhotra
Member
Dr.S.Selvi
Member
Mr.T.Bharathiraja
Member
Ms. Swati Milind Athavale
Member
Mr. Manohar K. Chaudhari
Member
Dr.M.K. Ravishankar
Member
NEWS LETTER Page No.
3
Dr.Arunkumar Sampath made a presentation on FISITA
World Congress 2018 and likened it to Olympics for
automotive industry brought by SAEINDIA for the 1st time to
India based on the successful APAC 16 organized in 2011 by
SAEINDIA. He invited industry and leaders to participate in
the event and make it a grand success as it is a prestigious
event for the automotive world.
The panel discussion was moderated by Mr.Deepangshu
Sharma, Editor in Chief, Autotech Review along with
stalwarts like Mr.I.V.Rao, Advisor to MSIL, Mr.Dinesh Tyagi,
Director, iCAT, Mr.Vishnu Mathur, Director General of SIAM
and Mr.S.M.Vaidya, E.D (Operations).
Mr.I.V.Rao also felt that enforcing BS VI within a short time
frame is a huge and complex task and will find the industry
gasping with preparations to conform to it. The ecosystem
has not been created for a smooth change over and the
complexity will seriously undermine the capability of
industry to cope with the challenges. He added that it will
be a huge challenge for OEM's to make their products BS VI
compliant and the impact on terms of investment would
also be substantial with many small and medium scale
manufacturers crumbling under it.
Mr.Dinesh Tyagi explained what exactly BS VI means to the
industry in terms of tighter emission norms, real driving
emissions, OBD, In-use compliance etc. He also explained
various steps taken by ARAI, GARC and iCAT to create the
supporting infrastructure to test the systems and products
and how they would be able to help the industry to get
ready for compliance with the regulations.
Mr.Vishnu Mathur said that while industry has committed
to Govt. of India (GoI) to take on the challenge of
leapfrogging to BS VI by 2020, he put forward a
fundamental question as to “what are we getting ready
for?” Are we getting ready for “manufacturing BS VI
vehicles from 1st April 2020 or are we getting ready for
“registering them from that date? He stated that the two
were very different and a change in the date of
manufacturing to date of registration would have a big
impact on the state of preparedness of the industry to meet
BS VI norms as it would further compress the time available.
Furthermore, there were some categories of vehicles
peculiar to India where BS VI solutions do not exist even in
Europe for which development work has to be done ab-
initio in India.
Mr. Mathur also mentioned that the issue of RDE would
also become quite critical as some quarters, especially
NGOs have been demanding that RDE should become
applicable from 2020 itself which would not give time to
industry to gather adequate data on the BS VI driving cycles
in the country. Also there was a misconception with these
NGOs that RDE would replace the PUC System for checking
pollution from in-use vehicles, which needs to be corrected.
He stated that SIAM is in constant dialogue with GoI to
voice the concerns of the industry to policy makers and is
requesting GOI to address the various concerns.
Mr.S.M .Vaidya stated that the Indian oil would be ready to
supply BS VI compliant fuels by 1st April 2020 at the retail
outlets as per plans to offer products to the industry
conforming to BS VI regulations. He mentioned IOCL is
exploring the feasibility to supply BS VI Complaint fuel at a
few select pumps in major metros ahead of the April 2020
deadline.
IOCL has already supplied BS VI diesel to certain automobile
companies like Honda motors and Mahindra and Mahindra
from their Mathura Refinery last year for their engine
testing purposes.
There was active and purposeful interaction from audience
and penetrating questions from the moderator to the
panellists on various aspects of BS VI regulations and
compliance and he also pointed out the first report from
Mr.Mashelkar and the progress so far including the sudden
enforcement within short time frame.
There was lively and active interaction from the audience
and interesting and relevant comments from the
moderator who raised the right concerns and issues for the
panellists to respond making the evening truly an enriching
experience.
Mr.Gautam Dutta, Director (Marketing) Siemens proposed
a vote of thanks for a well-rounded meeting making the
informed audience enlightened further on the topical issue.
NE W S L ET T ER P a g e N o .
4
TWO WHEELER CONFERENCE:
SAEINDIA Automotive Board along with SAEINDIA Bangalore
Section hosted the first Two Wheeler Conference on 4th & 5th
August 2017 at PES University Bangalore. The Theme of the
conference was “Green Wheeler for Safe and Sustainable
Mobility”. The Conference was attended by more than 120
delegates from Industry and Academia.
The leaders were Dr.Arunkumar Sampath of Mahindra &
Mahindra as Conference Chairman; Mr.Girish Ramaswamy of
Continental as OC Chairman and Mr.C.Prakash of Ashok
Leyland as the Technical Committee Chair of the conference.
Mr.J.Munirathnam, Chairman, SAEINDIA Bangalore Section
inaugurated the conference and explained how the thought
provoking theme will engage industry professionals and
academia in an animated discussion on various aspects
concerning emission, exhaust, safety and introduction of ABS
and connectivity in two Wheeler. Industry and Road Ahead.
Mr.Girish Ramaswamy, OC Chair explained the objective of
the conference. He gave a broad overview on the program for
the two days with an emphasis on topics connected to the
theme Green Wheeler for safe and sustainable mobility.
The message from Dr.R.K.Malhotra, President SAEINDIA in
the form of a video tape set the tone for the first Two
Wheeler Conference. He emphasized that the conference
theme is aptly chosen as “Green Wheeler for Safe and
Sustainable Mobility” and will focus on key technology issues
relevant to two wheelers such as Safety, Design, Electronics,
Alternate Power train, and Emissions. These initiatives are to
address global challenges and to raise the bar for innovation,
improved processes and technology up gradation.
POLICY DEPLOYMENT MEET 2017:
The Policy Deployment Meet (earlier known as Presidential
Policy Meet), the strategy summit of all key leaders of
SAEINDIA was conducted in Radisson Blu GRT Temple Bay at
Mahabalipuram on July 28th & 29th 2017.
Having grown from strength to strength in India over the last
22 years, the purpose of this meet is to emphasis the theme
of delivering professional services to our members across pan-
India and partner with auto, aero and off-highway industries
and associations.
Our President, Dr.R.K.Malhotra has opened the policy
deployment meet with past year highlights and set the tone
for the conclave.
Action Taken Report was given by the DDG, followed by
presentations by each of the sections, verticals and boards.
Our Senior VP Dr. Bala Bharadvaj has outlined the need for re-
building our vision. Based on this theme, the team was
grouped into three teams to deliberate details on
Develop a Board Structure with Role Clarity, to
support our future.
Increased Collaboration with others, and strengthen
our Brand.
Enhance SAEINDIA Office capability to support more
activities.
The policy deployment meet 2017 is concluded with MC
meeting. The meet was well attended by more than 50
committed SAEINDIA leaders.
NEWS LETTER Page No.
5
Ms.Hemalatha Annamalai, MD and CEO of Ampere Vehicles,
an electric bike company, which has worked with individuals
at the root level by empowering them with low cost
transportation and commuting solutions, underlined an
interesting observation in this context. “Rural customers are
no different than the urban customers. In fact, rural
customers are more flexible and willing to adopt newer
means of commuting such as the electric two-wheelers. The
mind-set is fast-changing in the rural markets,” she added.
Talking on safety and giving supplier’s perspective,
Mr.Prashanth A, who looks after the engineering of
powertrain (ICE and electric tech), safety and connectivity at
Bosch said, “Bosch has the largest development centre in
India outside of Germany. While there are efforts to increase
the localisation of several technologies, there is a lot of value
addition in terms of engineering for tailor-made solutions for
India.”
ANSYS Mr.Guruprasad sees all the challenges around
emissions, safety and electrification in the industry as a pool
of opportunities. According to him, OEMs have become very
aggressive on their requirements on these areas.
EXPOSITION:
Exposition organized concurrently along with the conference
had over 8 exhibitors with reputed organizations like APPL,
BOSCH, Mathworks, Ansys, Hero Motocorp, Continental, PES
University and ASM Technologies. Electric Vehicle was
displayed by Bosch and Hero Maestro from Hero Motocorp
besides other vendors of the two wheeler industry.
Technical Sessions:
The topic for the first Technical session was Go Green -
Compliant with BS VI & Small Engines and Propulsion.
Mr.C.Prakash from Ashok Leyland on “Go Green”, Mr.Sounak
Basu from Continental on “Substrate technology update for
meeting BS VI legislation” and Mr.Deshpande from
Mathworks on “Addressing challenges in meeting the
emission norms using Model-Based Design”.
The topic for Second Technical session was Power Train -
Hybrid & Electric and Advanced System of Suspension /
Steering. Mr.Ravishankar – Ansys made a presentation on
“Automotive Emerging Trends & ANSYS Role”, Mr. Manish
Kondhare – Continental made a presentation on the topic
“ISG - Step towards greener 2 Wheeler “and Mr.Sanketh
from PES University made a presentation on "Experimental
investigation of wear of Two Wheeler Chain".
Mr.Vinay Harne, President, NPD, TVS Motor Company,
delivered the keynote speech on emerging challenges in the
two-wheeler industry. In his presentation. Mr.Harne touched
upon several key topics including how the clampdown on two-
wheeler exhaust emissions has progressed under many
regimes and the average city commuting speeds that consume
maximum fuel under the different traffic conditions.
Dr.Rajiv Basargekar, Director, APPL, the second keynote
speaker, spoke on the industry trends and evolving polymer
technologies for the industry. He spoke about the evolving
changes in application of polymer technology in various
aspects of manufacturing Two Wheelers and the increased
content without any compromise in Safety is expanding the
range of polymers in Two Wheeler production. He also pointed
out the advancement of technology and unique application
making the product robust and reliable.
The highlight of the first day was the panel discussion on
the theme of ‘Two-Wheeler Industry – Then, Now and the
Future.’ The session, which saw participation from Mr.Vinay
Harne, President NPD, TVS Motors; Mr.Suraj Agarwal,
Operating Head, New model VP, Honda Motorcycle &
Scooter India; Ms.Hemalatha Annamalai, MD and CEO,
Ampere Vehicles; Mr.Prashanth A, GM – Engineering, two-
wheeler & powersports – Bosch India and Mr.Guruprasad,
Regional Head, strategic business, ANSYS, was moderated
by Autocar Professional’s Assistant editor Mr.Amit Panday.
Mr.Suraj Agarwal from Honda, which has recently launched
its most affordable 110cc Cliq scooter in Rajasthan and
Maharashtra, spoke about achieving the right cost mix,
banking on the benefits derived from the economies of
large-scale manufacturing.
NE W S L ET T ER P a g e N o .
6
The Second day of the Conference saw special presentations
by Prof.Dhruv Panchal, LD College of Engineering on the topic
“Challenges in Designing of Two Wheelers for Indian Market”
and Mr.Prabhu Panduranga, VP, Bosch on “Emerging Markets
Shaping Up Technology in Two-Wheelers”.
The next topic for the Technical Session was “Safety - Passive
& Active and Infotronics - Recent Trend & Challenge”. Mr.Sai
Praveen from TVS Motors made a presentation on Safety and
Mr.Naveen Govindan from Continental made a presentation
on “Two Wheeler Active Safety Systems Made Safer”.
The next Technical session was “Infrastructure for Vehicle
Electrification & Homologation and Compliance with Indian &
Global market regulations”. Mr.Pradeep from Bosch spoke
about “Technology Evaluation for Two-Wheeler based
Personal Mobility in Emerging Markets beyond 2020”.
The highlight of the Conference was developing a new app
for obtaining the feedback from the audience for each of the
presentation and this was well appreciated by OC Members.
This was developed by Mr.Akshay, Intern Bangalore section.
Dr.Arunkumar Sampath, Chair Automotive Board summed up
the proceedings of the two days of the conference giving
brief details on each presentation, Keynote speeches and
panel discussion. He complimented the Bangalore section of
SAEINDIA for hosting the first Two Wheeler Conference and
thanked industry professionals and members of academia
who shared their knowledge with the enlightened audience.
SAEINDIA SKILL INDIA INITIATIVE (S2I2):
SAEINDIA launched the SAEINDIA SKILL INDIA INITIATIVE
(S2I2) Pilot program in CIT, Chennai on 24th July 17.
On completion of S2I2, we expect the students to be ready
for absorption by automotive industry and we shall extend
our support to share the Grades obtained in S2I2 in
confidence with prospective employers.
• The Industry expects engineers to have in-depth
knowledge of technical skill sets in the automotive
domain with clear understanding of fundamental
concepts, Unit conversions, Engineering drawing,
Assembly and Manufacturing methods.
• The Skill Development Pyramid (SDP) focuses on
imparting key technical skills an engineer must
possess before entering into an industry and is
devised to progressively achieve the goal of skill
acquisition.
Highlights of Program:
19 Students Participated, Course Module - 16 Days of Class
room sessions and 7 Days of Industrial Visit. Certification
with Grading to students based on assessment. 18
Professional Volunteers from Automotive Industry have
been imparting Knowledge sharing and training the
students.
Two Automotive Organisations to showcase their Products
& Technical Know How – SIEMENS & 3D PD. 6 organizations
such as M&M, AL, INDIA PISTONS, WABCO, CVRDE, and
TAFE approached for Industrial Visits. 5 Colleges across India
have already expressed Interest to host the event in their
campus and scale up this programme memento to Mr. S.
Sriraman as the token of gratitude.
NEWS LETTER Page No.
7
CHENNAI DIVISION LECTURE MEETING:
SAEISS Chennai Division organized Lecture Meeting
program on “Trend of Transmission for Tractors” on 8th
July 2017, Saturday at AIEMA, Chennai. Speaker of the
session is Mr T.R. Karthikeyan, Chief Design Engineer,
TAFE, Chennai.
Mr. M. Khader Basha, Additional Director, CVRDE,
Chennai Division Chairman welcomed the participants
as well introduced speaker to the participants and
handed over the session for his lecture.
Mr T.R. Karthikeyan started his lecture by explaining the
topic of the day Trend of Transmission for Tractors. He
explained about Manual / Straight Shift Transmission,
Synchronized Shift, Semi-Automatic Transmissions, CVT
Transmission, and Hydrostatic Transmissions of various
companies like TAFE, John Deer, Massey Ferguson, and
New Holland Tractors etc... . He also explained in detail of
the each transmission with mechanism video.
Mr. M. Khader Basha delivered a vote of thanks and Mr. S.
Shanmugam, Vice Chairman SAEISS, presented the
memento to Mr T.R. Karthikeyan for giving the useful
lecture.
Mr. S. Shanmugam also announced about the International
conference on, “Advances in Design, Materials,
Manufacturing and Surface Engineering for Mobility-
ADMMS 2017” during July 19th to 21st 2017 is being
organized by B.S.Abdur Rahman Crescent University jointly
with SAEISS.
STUDENT KNOWLEDGE IMPROVEMENT PROGRAM:
Student Knowledge Improvement Program (SKIP) program
on topic of “Latest Advancements in Welding Technology
for Automotive” was organised by SAEINDIA Southern
Section on 6th and 7th July 2017 at Jeppiaar Institute of
Technology, Kunnam, Chennai.
Speakers are Dr. D. Muruganandam, Professor & Head of
the Department at Jeppiaar Institute of Technology,
Kunnam, Chennai. Mr. Sasi Anand Parthasarathy, Fronius
India Pvt Ltd.
Inauguration was done by Mr. M. Khader Basha, Division Chair,
SAEISS - Chennai Division. Dr. D. Muruganandam started the
program and explained the basics of welding like definition of
welding, types of welding, and explain about Arc welding, Gas
welding, TIG welding, MIG welding, Pressure welding,
Resistance welding, Friction welding, spot welding and
projection welding. He also explained about Iron Carbide
equilibrium Diagram and briefly explained about Ferrite
cementite, austenite….etc.
Mr. Sasi Anand Parthasarathy explained welding power source,
types of electrodes and selection of electrodes depends on the
welding material. He also gave detailed explanation about
following electrodes Rutile electrodes, Basic electrodes, CrNi
electrodes, Cellulose electrodes, Aluminium electrodes, Cast
iron electrodes and explanation about Metal Inert Gas Welding
[MIG], Metal Active Gas Welding [MAG /CO2].
At the end of the session Principal of Jeppiaar Institute of
Technology presented Memento to Dr. D. Muruganandam &
Mr. Sasi Anand Parthasarathy. He also gave certificates to
participants. The Students gave their feedback about the
program at the end of the Session.
SAEINDIA Section News - Southern Section (SAEISS)
NE W S L ET T ER P a g e N o .
8
AWIM MASTER TEACHER TRAINING PROGRAM:
AWIM (A World In Motion) Master Teachers Training
program was conducted successfully on 13th & 14th July 2017
at Kanchi Sri Sankara Matric Hr. School, West Tiruchendur.
The training was focused on jet-toy activities of AWIM
curriculum. There was overall participation of about 20 on
each of the day.
On 13th July 2017, Mr. C. Shanmugam, AWIM instructor
welcomed all participants. It was followed by introduction of
all individuals. The training started with the introduction of
SAEISS, explaining the different activities conducted by the
society for the members.
On the same day Mr. T. Kasiraja, Treasurer, SAEISS & Mr. C.
Shanmugam, AWIM Instructor thanked the management of
Kanchi Sri Sankara Matric Hr. School for hosting the Master
Teacher Training Program in their instruction and presented
the memento to the principal Mrs. R. Selva vaishnavi.
First day Mr. C. Shanmugam, AWIM instructor champion
presented the Jet-toy activities and he demonstrated the
building of chassis and Jet-toy. After Initial demonstration,
there were seven teams for the event.
Second day Mr. C. Shanmugam, AWIM trainer briefly
explained how to solve the problems in the jet toy vehicle to
participants and shared his experience and gave some expert
tips for training their students.
On July 14th Mrs. R. Selvavaishnavi, Principal distributed the
certificates and gift to all Master Teacher Training Program
participants.
ADMMS 2017:
SAEISS conducted International Conference on Advances
in Design, Materials, Manufacturing and Surface
Engineering for Mobility (ADMMS) from 19th to 21st July
2017 at B.S. Abdur Rahman Crescent University.
The conference started on July 19th 2017 with Workshop
on Model Based Systems Engineering in Automotive
Applications by Mr. Murugadass Kannan, Siemens in the
forenoon session. In the afternoon, the participants
visited MRV (Mahindra Research Valley) and they were
able to connect the applications in real life situations. 35
members attended the workshop.
Dr. Aravind S Bharadwaj, CTO, Mahindra & Mahindra,
Chennai inaugurated the conference on July 20th 2017 and
delivered the lecture on Light weight mobility.
Mr.N.Balasubramanian, Deputy Vice President, RNTBCI,
appreciated the university in organizing this conference in
alignment with the SAEINDIA Centre for Automotive
Excellence (First of its kind) in Surface Engineering at BSA
University.
Mr.S.Sriraman, Sr.VP, TAFE, Chairman SAEISS highlighted
that 138 were shortlisted from 150 abstracts and 93
papers were received under Design, Materials,
Manufacturing and Surface Engineering and 52 papers
have been selected for technical presentation. 173
Professional members participated in the conference
from 28 academic institutions and from 15 industries
including Professors from International Universities. Dr. R.
Rajendran, Professor, B.S. Abdur Rahman Crescent
University, Chennai and Organizing Secretary of ADMMS
2017 proposed a vote of thanks.
NEWS LETTER Page No.
9
A total of 39 papers were presented in 9 technical sessions
in the areas of Product Design, Modelling and Simulation,
Materials and Surface Engineering on the two days the
session chair/co-chair and evaluators were from industries
like M & M, Ashok Leyland, WABCO, FORD, Caterpillar, TAFE
and from reputed institutions like IIT, MIT, Central
University of Tamilnadu. They appreciated the technical
content and quality of the papers. 80 % of the papers
presented were from industries like M & M, TAFE, IP Rings
Ltd, India Pistons, UCAL Fuel systems, and 20 % from
academia like IIT and Anna University.
In the closing session there was an panel discussion on light
weight mobility headed by Dr. Venugopal Shankar, VP &
DEAN of MTA, Mahindra & Mahindra Ltd with other
panelists Dr. A. Rajadurai, Professor and Dean, MIT, Anna
University; Mr. V. Sriram, Engineering Manager - Model
Based Systems Engineering, Siemens PLM; Dr. Subramani
Sellamani, Dy. General Manager, CAE Modelling
Automation, RNTBCI and Mr. Sushil S Mane, Director –
Technical Support- Altair. The discussion was productive
and constructive as it was based on design, materials and
manufacturing aspects.
5 plenary sessions were also organized during the
conference and are as,
Mr.P.Suresh, General Manager, RNTBCI delivered
talk on BIW a Competition between Materials.
Dr.N.Saravanan, M & M on Engine Emissions.
Design and Development of Hydro gas suspension
by Dr.U.Solomon, Scientist G from CVRDE, Avadi.
Dr Ahmad Mujahid Ahmad Zaidi, National Defence
University of Malaysia on Application of Modeling
and Simulation for Engineering Problems.
Recent Advances in Application of Laser Based
Surface Treatment Processes in Automotive Sector
Dr.S.M. Shariff, Scientist E, ARCI, and Hyderabad.
Dr. P. Sivakumar Director, C.V.R.D.E Avadi was the chief
guest for the valedictory program. He delivered the
valedictory address on new technologies used in Battle field
tanker. Mr. D. Ganesh, Lead Engineer, Mahindra &
Mahindra, Conference Champion SAEISS proposed the vote
of thanks.
ERODE DIVISION LECTURE MEETING:
SAEISS Erode Division organized Lecture Meeting program
on “Emerging Trends in Tractor Technologies” on 05th
August 2017 at K.S.R College of Engineering, Tiruchengode.
Dr. N. Shivasankaran, HOD, K.S.R College of Engineering
welcomed the participants and introduced the speaker.
Mr.S.Sriraman, Chairman, SAEISS opened the Knowledge
Round Table (KRT) Club at K.S.R College of Engineering and
inaugurated the function. Dr. P. Senthilkumar, Vice
Principal, K.S.R College of Engineering welcomed the SAEISS
Erode Division MC & EC Members and all the participants.
He introduced the speaker and handed over the session.
Mr.S.Sriraman started his lecture by introducing about the
TAFE Company and its product variants. He explained the
topic of the day Emerging Trends in Tractor Technologies.
The main problems of Tractor technologies and its effects in
human life and environment are also explained.
He also explained the formation of pollution and main
pollutants from engines, different emission norms and their
values along with the government’s interest cum action
taken for pollution control. The video on Emerging Trends
in Tractor Technologies is played to give audience a clear
idea about these technologies. There were many questions
asked by the participants related with emission reduction,
electric vehicle, hydrogen vehicle, etc. and all were well
answered by the speaker.
Dr. M. Eswaramoorthy, Dean, Nandha Engineering College
and Secretary, SAEISS - Erode Division, proposed a vote of
thanks and presented the memento to the speaker as the
token of gratitude.
NE W S L ET T ER P a g e N o .
10
ONE DAY NATIONAL LEVEL SYMPOSIUM:
Council of Scientific & Industrial Research (CSIR) jointly
with SAEISS sponsored one day National level Symposium on
“Applications of Lightweight Materials for Automotive and
Defence Vehicles” was conducted at Institute of Road and
Transport Technology (IRTT) Erode on 5th August 2017
witnessed 550 participants from academia. The symposium
was inaugurated with welcome address by Dr.S.Selvi,
Professor, Mech. Engg, IRTT followed by Presidential address
by Dr.K.Mayilsamy, Principal, IRTT.
The Keynote addresses was given by Mr.S.Sriraman,
Chairman, SAEISS and Mr.S.Krishnan, MC Member, SAEISS
and were felicitated by Dr.R.Subramanian, Professor and
Head, Auto. Engg, IRTT. Dr.E.Rajasekar, Professor, Auto.
Engg, IRTT & Secretary, SAEISS proposed the Vote of thanks.
Mr. S. Sriraman delivered a lecture on “Weight Reduction
Techniques in Automotive Tractors &Off Highway Vehicles”.
Mr. S. Krishnan delivered an invited lecture on “Applications
of Lightweight Materials for Commercial & Defence
Vehicles”. Dr. E. Rajasekar delivered the lecture in the third
session on “Lightweight Materials for Passenger Cars”. Dr. S.
Selvi delivered a lecture on “Lightweight Materials Selection
and Characterization”.
The highlight of the symposium is the display of a Massey
Fergusson Lightweight tractor manufactured recently by
TAFE, Chennai at IRTT. All the participants were explained
with the new materials and weight reduction techniques
used in this tractor by the Technical experts from TAFE,
Chennai. All the sessions were more interactive and
participants asked many questions and all the queries raised
by the participants were clarified by the Speakers of the
symposium.
Outcome from the Symposium:
The wide openings in the Automotive Vehicles,
Aeronautical, Defence vehicles and Machines
manufacturing industries are exposed.
The importance of using the lightweight materials to
reduce emissions from the automotive vehicles to
meet the new emission norm BS VI explained.
The role of lightweight materials in improving the
performance of Automotive and Defence vehicles was
highlighted.
The participants both faculty members and students
were requested to do their research and project work
in the area of Applications of lightweight materials,
Weight reduction technologies, Emission reduction
technologies and Vehicle Performance improvement
aspects.
Recommendations and Plan of Action for Future:
In this symposium, various applications of lightweight
materials for automotive and defence vehicles were
exploded to the delegates.
The new lightweight materials characteristics,
manufacturing methods, testing methods are to be
developed and focused in the future symposium.
Design for materials, design for manufacturing and
design for assembly, design for maintenance and
design for murder (Recycling and reuse) studies can
be done.
NEWS LETTER Page No.
11
STUDENT KNOWLEDGE IMPROVEMENT PROGRAM:
Student Knowledge Improvement Program (SKIP) program on
topic “Off Highway and Special Types of Vehicles” was
organised by on 19th & 20th August 2017 at SAEISS Office,
Guindy, Chennai. Speaker of the session is Dr. E. Rajasekar,
Professor, Faculty of Automobile Engineering, IRTT & Secretary,
SAEISS. Inauguration was done by Mr. B. Senthil Kumar, SKIP
Champion - SAEISS. He also introduced Dr. E. Rajasekar to the
participants and handed over the session to speaker.
Dr. E. Rajasekar started the program with a brief Introduction
about Off Highway and Special Types of Vehicles. He explained
about Requirements with slides & Video to the participants. The
program explored the basic aspects of understanding the
construction, working and salient features of Heavy Goods
Vehicles, Construction and Earth moving vehicles, Land clearing
Vehicles, Wheeled and Crawler Tractors, Material Handling
vehicles, Military Vehicles etc.
He also explained the working mechanism of Dump trucks,
Excavators, Bull dozers, Military tanks, Loaders, Wheeled and
Crawler Tractors, Tree cutters, Scrappers and Bush cutters to
the participants along with the technical features of each
vehicle.
During the valedictory session Mr. R. Armstrong, MC Member
SAEISS explained the participants about his vast experience in
this field and the technical working of the TAFE Tractors. He
also requested the participants for feedback about the
program. He distributed the certificate to the participants and
also felicitated the speaker with the memento as the token of
appreciation.
CHENNAI DIVISION LECTURE MEETING:
SAEISS Chennai Division organized Lecture Meeting program on
“Value Methodology Approach using Functions” on 12th August
2017, Saturday at AIEMA, Chennai. Speaker of the session is Mr.
P. ARJUNRAJ, of Actuant India Private Limited.
Mr. M. Khader Basha, Additional Director, CVRDE and Chennai
Divisional Chairman welcomed all the participants of the lecture
meeting and introduced speaker to the participants and handed
over the session to Mr. P. Arjunraj.
Mr. P. Arjunraj started his lecture by explaining the topic of the
day Value Methodology Approach using Functions. He started
with the basics of Value Analysis and Value Engineering.
He also gave a lots of industrial case studies for better
understanding by the participants which was we attracted by
the participants. Mr. P. Arjunraj also explained the VA/VE
concepts in basic manner so that a beginner can also
understand the concept.
Mr. M. Khader Basha delivered the vote of thanks. He thanked
all the participants and the speaker for spending their time for
SAEINDIA Southern Section Chennai Division lecture.
He also welcomed Mr. V. Ramakrishnan senior member of
SAEINDIA Southern Section to present the memento to the
speaker. Mr. V. Ramakrishnan presented the memento to Mr. P.
Arjunraj for giving the great lecture.
NE W S L ET T ER P a g e N o .
12
SAEINDIA Section News - Southern Section
(SAEISS)
CHENNAI DIVISION LECTURE MEETING:
SAEISS Chennai Division organized Lecture Meeting program
on “Design Aspects of Diesel Engine for Armoured Fighting
Vehicles” on 9th September 2017, Saturday at AIEMA,
Chennai.
Mr. M. Khader Basha, Additional Director, CVRDE & Chairman
SAEISS Chennai Division welcomed all the participants of the
lecture meeting and introduced speaker to the participants
and handed over the session to the speaker.
Mr.Hari Viswanath started his lecture by explaining the topic
“Design Aspects of Diesel Engine for Armoured Fighting
Vehicles”. Mr.Hari Viswanath also gave examples and case
studies in the design of Diesel Engine for AFV. He explained
the Methods for High specific output and typical transmission
of AFV in the Diesel Engine. He also explained the engine
performance characteristics, Driving characteristics and
Design of AFV Engine.
Mr. M. KhaderBasha delivered the vote of thanks. He
thanked all the participants and the speaker for spending
their time for SAEISS Chennai Division lecture. He also
welcomed Dr. K. Balasubramanian, Anna University & Senior
Member of SAEINDIA to present the memento to the speaker
for his excellent lecture on the specified topic.
SAEINDIA Section News - Bangalore Section
(SAEIBS)
TECHNICAL TALK AND MEMBERSHIP DRIVE:
ASM Technologies Limited is a publicly-listed company in India
with global presence in USA Singapore and UK. With over two
decades of experience, ASM has been providing world class
consulting and product development services in the areas of
Engineering Services and Product R&D with successful
Offshore Development & Support Centres in India and
Overseas for its global clientele.
On 21.08.2017 SAEIBS had organised and technical talk and
the membership drive at ASM Technologies.
The event had tech talk on Emerging Trends in Automotive
Industry and it was wonderfully delivered by Mr. Rakesh Bidre
Senior Engineering Manager, Advance Vehicle Development,
Business Planning of GMTCI. Before this Mr Munirathnam gave
detailed introduction on SAEINDIA and its role and motive to
world of automotive industries.
There were about 100 plus engineers who attended the event
and had good interactive Q&A section.
NEWS LETTER Page No.
13
SAEIWS FURNISHED OFFICE INAUGURATION:
SAEIWS Furnished Office was inaugurated on 5th July 2017 by
Mrs. Rashmi Urdhwareshe, in presence Dr. K. C. Vora. Some
of the founder board members of SAEIWS such as Mr. K.
Srinivasan, Mr. Prakash Kulkarni and current board members
participated in the event. All earlier board members and
secretaries were felicitated for their contribution towards
SAEINDIA activities. There were around 50 participants in the
inauguration.
TIFAN LAUNCH:
SAEINDIA Off-Highway Board, in association with Mahatma
Phule Krishi Vidhyapeeth (MPKV), Rahuri announced the
commencement of the first edition of a unique innovative
competition Technology Innovation Forum for Agricultural
Nurturing (TIFAN). A formal inauguration function for the
TIFAN competition was organized at the College of
Agriculture, Pune on 5th July 2017.
TIFAN is conceptualized by off-highway board and John
Deere engineers with an objective to provide a platform for
Agricultural product innovation by generating a talent pool
for off-highway industry. This competition will also provide
the undergraduate students hands-on experience towards
agricultural/off-highway machinery and process. It provides
platform for the engineering and agricultural engineering
students to connect with the real life challenges of
Agricultural sector in the country. The competition will
challenge the students to solve the real life challenges of
farm mechanization. Eventually, such endeavours will help
the society by enabling the small and marginal farmers with
farm mechanization for yield and productivity
improvement.
Mr. Nitin Agarwal, Chairman of SAEINDIA Off-Highway
board along with Mr. Mahesh Masurkar, Secretary of
SAEINDIA Off-Highway board and Mr. Krishnat Patil,
Convener TIFAN 2017 greeted all the guests on the dais
with a book.
Mrs. Rashmi in her inaugural speech talked about SAEINDIA
and its different initiatives aimed at students’ development.
She also echoed Off-highway board’s contribution through
different initiatives like SINE and FINE. Mr. Nitin Agarwal
emphasized the need of youth development and how off-
highway board is contributing with its various initiatives. He
also touched upon the need of focused approach towards
skill development in this sector to increase the productivity
and efficiency with increasing mechanization trend. He also
played the video message from Dr. Raghunath Mashelkar,
where Dr. Mashelkar congratulated the SAEINDIA off-
highway board and conveyed best wishes to TIFAN team.
Hon’ble Vice Chancellor, MPKV Dr. K. P. Viswanatha in his
speech pointed out the role of small and affordable
mechanization for the low land holding farmers. Hon’ble sir
appreciated the efforts from the board in starting this
innovative competition. He also reiterated the support from
MPKV, Rahuri for hosting the TIFAN competition along with
the technical support.
Mr. Venkataraj in his address talked about the SAEINDIA
role in TIFAN competition and expressed his gratitude for
extending the competition to agricultural engineering
students along with regular engineering students. He also
stated that SAEINDIA is feeling proud to start this student
competition, unique in the world.
SAEINDIA Section News - Western Section
NE W S L ET T ER P a g e N o .
14
Mr. Krishnat Patil briefed the audience with the competition
details and various milestones of it. TIFAN will be organized
annually with a new challenge theme every three years. The
problem statement / challenge will be related to farm
operation like land preparation, intercultural operation &
harvesting.
The competition will be held in 2 stages viz; Virtual and Field
Competition. Field evaluation will happen at MPKV, Rahuri.
The challenge for TIFAN 2017 is ‘Self Propelled Onion
Harvester’. The evaluation criterion will be Innovation,
Productivity, Efficiency, Fuel Economy, Cost and Ease of
operation.
Dr. Vora walked the audience through the journey of TIFAN
from concept to reality. He also mentioned that team, with
their previous BAJA experience, worked for more than 1 year
to detail out the various aspect of this competition. He
congratulated the team stating TIFAN will be one of its kind
of competition.
Mr. Rafiq Somani, Country Manager, India, Asia, Anz, ANSYS
and off-highway board member wished the team a grand
success and said Ansys will continue support TIFAN along
with other initiatives from the board.
Mr. Biswa Mandal, Head engineering Mahindra stated the
relevance of TIFAN to the needs of the farmers and assured
full support from Mahindra. Mr. Ravi Prashantha, Head
engineering Caterpillar and off-highway board member
congratulated the team and conveyed his support.
Other dignitaries in the auditorium included SAEINDIA
western section members, off-highway board members as
well as senior leaders from organizations like John Deere,
Cummins, ARAI and MPKV.
Vote of thanks was proposed by Mr. Mahesh Masurkar,
Secretary SAEINDIA Off- highway board and it was followed
by networking dinner.
COLLEGIATE CLUB (CG) INAUGURATION:
SAEINDIA Collegiate Club at Thakur College of Engineering &
Technology (TCET) was inaugurated on 17th July, 2017.
Collegiate club started with membership of 52 students and
3 teaching faculties.
The Chief Guest of the inaugural function was Dr. K. C. Vora,
Chairman SAEIWS & Dy. Director and Head, ARAI, Pune.
Senior leaders of the Institute were also present. It includes
Dr. B. K. Mishra (Principal), Dr. R. R. Sedamkar (Dean
Academic), Dr. Sanjay Kumar (Dean-Mentor, Mechanical &
Civil Engineering), Dr. Siddesh Siddappa D. (Head,
Mechanical Engineering,), Mr Rajeshwar Deshmukh (Dy.
Head, Mechanical Engineering). Faculty members along with
nearly 100 students from various departments of TCET were
also present.
Mr. Rupesh Deshbhratar & Ms. Sneha Rodrigs started
inaugural function. Dr. Siddesh Siddapa welcomed all the
guest and students. It was followed by felicitation of Chief
Guest, Principal and Dean (Academic). Dr. Sanjay Kumar
addressed about importance of SAEINDIA activities and
future challenges in automotive sector.
Principal, Dr. B. K. Mishra welcomed the Chief Guest and
congratulated Mechanical Engineering Department for
starting SAEINDIA Collegiate Club in TCET. Dr. R. R.
Sedamkar also put forward his valuable guidance. Student
Vice Chair Person, Mr. Nimit Maheshwari and Student
Publicity Chair, Mr.Pawan Yadav were among the students
to share their views on SAEINDIA Collegiate Club.
SAEINDIA Presentation and interactive session by the Chief
Guest, Dr. K. C. Vora enlightened the students. He talked
about events organised by SAEINDIA, membership benefits
and informative videos of BAJA and SUPRA Competitions to
the students.
NEWS LETTER Page No.
15
AWIM MTTP - SOLAPUR:
AWIM Master Teacher Training Program (MTTP) was held at
Valentine Circle School, Solapur on 29th July 2017 jointly
organized by SAEIWS along and N. K. Orchid College of
Engineering, Solapur. Mr. Sagar Murugkar & Prof. Dipak Bhoge
were the trainer for the event. There were around 27 teachers
and 5 student volunteers participated in the training.
EMINENT SPEAKER SERIES LECTURE:
The Eminent Speaker Series Lecture on “Nano Engineered
Materials for Future Aerospace and Automotive Applications”
was organized on 31st July 2017 at ARAI, Pune, which witnessed
participation from engineers, scholars, students and faculty in
the discipline of engineering. The speaker for the lecture was
Dr. Ajit D. Kelkar, Professor and Chair, Nano Engineering at
North Carolina A & T State University.
Mr. Prakash Sardesai, welcomed all the participants. He
Introduced Dr. Ajit D. Kelkar and welcomed him.
Dr. Ajit D. Kelkar has a degree in Mechanical Engineering
along with masters from South Dakota State University. He
has done Ph.D. in mechanical engineering from Old
Dominion University, Norfolk, Virginia.
In his presentation he presented on following subtopics:
• Advances in conventional tape laminates and textile
composites.
• Delamination of composite laminates via low velocity
impact loadings and fatigue loadings.
• Dispersing nanoparticles using high energy mixing.
• Electrospinning technique to manufacture nano-
fibers.
• Development of novel resin system for
multifunctional applications.
Mr. Nitin Agarwal felicitated Dr. Ajit D. Kelkar with a
Memento as a token of appreciation. Mr. Ramesh Pasarija
proposed the vote of thanks for the event. The delegate
feedback for the event is 9.4 out of 10.
AWIM MTTP - KOLHAPUR:
AWIM Master Teacher Training Program (MTTP) was held
at KIT’s College of Engineering, Kolhapur on 5th & 6th Aug
2017 jointly organised by SAEIWS along with the host
college. Dr. K. C. Vora, Mr. Amol Patil and Mr. Sagar
Murugkar were the trainer for the event. There were 18
teachers and 15 student and 2 professors who
participated in the training.
NE W S L ET T ER P a g e N o .
16
AWIM MTTP - PUNE:
AWIM Master Teacher Training Program (MTTP) was held at
ARAI, Kothrud, Pune on 11th & 12th Aug 2017 jointly organised
by SAEIWS & ARAI. Mr. Yatin Jayawant and Mr. Mudassar
Sayyed were the trainers for the event. There were 12 teachers
and 15 students and 10 industry professionals who participated
in the training.
MEMBERSHIP DRIVE:
Membership drive at Symbiosis Open University, Kiwale was
conducted on 19th Aug 2017 by SAEIWS. Mr. M. K, Chaudhari,
Mr. Ramesh Pasarija, Mr. Paresh Shitole, Mr. Sagar Murugkar
and Mr. Shubham Bhavsar participated in the SAEINDIA
presentation to students and faculty of Symbiosis Open
University at Kiwale.
SAEINDIA OFF-HIGHWAY BOARD FEST:
SAEINDIA Off-Highway Board’s Forum for Engineering
Students on technologies of Tomorrow (FEST) lecture on
“Indian Emission Regulations” was held at Zeal College of
Engineering & Research, Pune on 22nd Aug 2017. Mr.
Ramesh Pasarija of SAEIWS presented the session and was
appreciated by the participants.
SYMPOSIUM ON WOMEN EMPOWERMENT:
SAEINDIA Off-Highway Board organized “Symposium on
Women Empowerment” in Cummins College of Engineering
for Women on 29th Aug 2017. The program was for women
engineering students and professionals.
The symposium had an panel discussion and the key points
of the panel discussion were as follows,
NEWS LETTER Page No.
17
Everybody should have 5 year plan and you can review and
revise every year.
• Empower, Connect and Inspire.
• One has to build her own brand.
• If woman gets educated, family gets empowered.
• Education gets confidence. Confidence of decision
making.
• Education gives economic independence.
• For Empowerment, Communication is important.
• Way of education is also important.
• We should have abundance mentality.
• Fortune favours prepared mind.
• Be Sincere Be Honest Be Open
• Don't fear the fear
• Empowerment does not mean over power.
• Empowerment is freedom to make choice.
AWIM MTTP - KUCTH:
AWIM Master Teacher Training Program (MTTP) was held at
HJD Institute of Engineering & Research, Kera on 31st Aug & 1st
Sept 2017 jointly Organized by SAEIWS and the host college.
Mr. Hardik Sarsvadiya & Mr. Ritwik Raman, were the trainer.
There were 15 student volunteers and 4 school teachers
participated in the training.
PROFICIENCY IMPROVEMENT PROGRAM:
Proficiency Improvement Program (PIP) on “Welding
Technology” was held at Zeal College of Engineering &
Research, Pune from 31st Aug to 2nd Sept 2017 Jointly
Organized by SAEIWS, ARAI and the host college. Mr. Martin
Dos, Mr. Vinay Mundada, Mr. Sanjay Nibandhe & Dr. K. C. Vora
were the speakers.
AWIM MTTP - AHMEDABAD:
AWIM Master Teacher Training Program (MTTP) was held at
held at Nirma University, Ahmedabad on 2nd Sept 2017 jointly
Organized by SAEIWS and the host college. Mr. Hardik
Sarsvadiya & Mr. Ritwik Raman, were the trainer. There were
more than 30 teachers and 20 student volunteers participated
in the training.
NE W S L ET T ER P a g e N o .
18
SAEINDIA Section News - Western Section
(SAEIWS)
INAUGURATION OF SAEIWS ELECTRONICS BOARD:
On 06th September 2017 Electronics Board of SAEIWS was
inaugurated by Mrs. Rashmi Urdhwareshe. Mr. Nilkanth
Devshetwar from John Deere was announced as the Chair for
the electronics board. He would take up the activities in the
electronics section through this Electronics Board. Mr. Parag
Mengaji presented upcoming ITEC conference details to board
members and requested their contribution through the board.
OFF-HIGHWAY BOARD FEST LECTURE:
SAEINDIA Off-Highway Board’s Forum for Engineering Students
on technologies of Tomorrow (FEST) lecture on “TRIZ - theory
on inventing problem solving” was held at MIT College, Pune on
15th Sept 2017. The presenter for this lecture was Mr. Santosh
Khadasare from John Deere. He is Level 3 TRIZ certified
professional. This was a great occasion for having this lecture
on Engineer’s Day to deliver the lecture on such a topic!
SAEINDIA Section News - Northern Section
(SAEINS)
EFFICYCLE 2017- WORKSHOP:
SAEINS in association with Maruti Suzuki India Limited (MSIL)
and International Centre for Automotive Technology (ICAT)
organized one day workshops for the participants of the
Efficycle 2017 event at 4 different locations viz,
Venue Date Region of
India North Cap University,
Gurugram 8th July 2017 North
KIIT University, Bhubaneswar
9th July 2017 East
Bangalore Institute of Tech., Bangalore
15th July 2017 South
College of Engineering, Pune
16th July 2017 West
Workshops started with the formal inauguration followed by
the welcome speech by Mr.U.D.Bhangale (Sr. GM - ICAT &
Convener - Efficycle 2017). Workshops were delivered by the
Technical Committee speakers Mr. Jitendra Singh Gaur & Mr.
Harpreet Singh Juneja of ICAT.
Out of all 4 sessions, in the first two sessions teams were
explained in detail about the rules to design and fabricate the
vehicle. The theme for this year is “Drive Excellence Season”
and emphasis was given to the theme. The teams were guided
about the better drive performance for both mechanical and
electric drives. Some useful tips about the electric drives
including the battery specification & connections, throttle
body, motor specifications etc. based on the previous
experiences were also shared with the teams. The 1st two
sessions concluded with the Q&A from teams followed by the
lunch.
Third seasons focused on the explanation of report formats
NEWS LETTER Page No.
19
In the 3rd session focused on the explanation of report formats
which teams have to submit at different stages of the event. In
the 4th and final session, teams were informed about the
procedure of main event which is going to be held at Lovely
Professional University from 1st to 5th November 2017.
Elaboration of technical assessment at college level, on-site
technical inspection, static event (design, cost, build quality
evaluation and marketing presentation round) and dynamic
event (acceleration, gradient simulation, Drive Excellence test
and endurance run) helped the teams to understand the
evaluation process. During open sessions at the end, teams
asked their queries to the speakers. Efficycle alumni members
also shared their experience with teams. About 80 teams from
all over India attended the workshops in all four locations.
Organizing committee members, Mr. Abhishek Dewan from
MSIL and Mr. Bibhu Sinha from SAEINDIA were also present
during the workshop at Gurugram. Alumni Committee
members supported organizing committee in successful
organizing of workshops at all locations. The workshop ended
with National Anthem and the vote of thanks to host institutes.
AWIM MTTP - DELHI-NCR REGION:
AWIM Master Teacher Training Program (MTTP) was held at
held at Mapple Emerald Hotel, RAJOKRI, New Delhi on 21st July
2017 jointly Organized by SAEINS and Maruti Suzuki India
Limited (MSIL). The event was inaugurated by Mr. Alok Jaitley,
Convenor, SAEINS and Mr. Anup Kacker, ED, SAEINS and the
trainers are Ms. Harshita and Mr. Sanjay Khan for jet-toy and
Ms. Megha Gupta and Mr. Dikshaant for skimmer as volunteers
from both Indira Gandhi Delhi Technical University For Women
and Jamia Millia Islamia University. There were more than 25
teachers and 10 student volunteers participated in the training.
TECHNICAL LECTURE:
The Department of Mechanical and Aerospace Engineering, Bennett University organized a seminar on SAEINDIA activities for initiating SAEINDIA Collegiate Club at Bennett University, Greater Noida, India on 24th August, 2017. The Chief Guest of the function was Mr. Anup Kacker, ED, SAEINS. Another technical speaker was Mr. Soumen Kundu, Manager from Maruti Suzuki India Limited (MSIL), Gurugram. The events of the seminar was managed by Dr. Deepali. The seminar was inaugurated by Dean, School of Engineering and Applied Sciences, Prof. Suneet Tuli. Prof. Vinayak Ranjan, Head, Department of Mechanical and Aerospace Engineering welcomed Chief Guest, speaker, faculties, students and staff. Mr. Kacker addressed the audience and explained about the importance of SAEINDIA in current scenario. He explained to students about the activities of SAEINDIA and how it could help students to build up their skills to come up with innovation. He called for innovation in design projects so that Bennett University gains an international recognition. He emphasized and provoked students to take part in SAEINDIA events to enhance their talents tremendously. He advised students to take initiative of conducting workshop and activities in the very premise of our University. Mr. Soumen Kundu delivered his technical lecture on “Emerging Engine Technology”. He explained about how engine stroke occurs i.e. how the four strokes like suction, compression, power and exhaust strokes take place in an engine and why currently there is phase shift between connecting rod’s center and crankshaft’s center. He emphasized the students should develop strong basics. The vote of thanks was delivered by Dr. Danish.
NE W S L ET T ER P a g e N o .
20
STUDENT CONVENTION:
SAEINDIA Student Convention 2017 with objective of
establishing an interaction amongst industry, SAEINDIA
personnel and students of engineering colleges, was organized
on 12th September 2017, Tuesday in the premises of ABES Engg.
College, Ghaziabad.
Inaugural session was organized in the Auditorium of Raman
block at the host college premises with around 500 people
from 9 neighbouring colleges. Prof.M K. Jha, Director, ABES
Engg. College, presented his inaugural speech and greeted the
audience open heartedly and conveyed his best wishes. Prof. D.
K. Sharma – Director, R & D, ABES Engg. College, gave his
motivational speech to the audience and highlighted the
importance of research and product development. He also
made the audience aware of the vision of Center of Excellence
– Automobile at ABES Engg. College, Ghaziabad.
Prof. Hemant Ahuja – HOD EN, ABES Engg. College,
subsequently opened the session with his speech and
underlined the performance of ABES Engg. College and
SAEINDIA Collegiate club in various competitions. He also drew
the attraction of the dignitaries to the fact that the college has
pioneered such event in the zone and finally released the
Constitution of SAEINDIA Student Collegiate Club at ABES Engg.
College, Ghaziabad.
The session was then handed over to Chief Guest Mr. V. K.
Jayaswal - ED, Shriram Pistons and Rings Limited for his key
note speech. He presented motivated the participants by
presenting facts and figures of automotive sector. Mr. Anup
Kacker, ED, SAEINS highlighted the importance of availing the
membership of professional societies and in particular how
SAEINIS is trying to bridge the Skill Gaps based on Industry
Expectations through Competitions, Student Conventions,
Technical Lecture etc..
The event also witnessed Technical talks from Mr. Sandeep
Sharma, DGM Technology of UNOMINDA, Gurgaon on
Product Development, Mr. Yogendra Singh Kushwaha, AGM,
Subros Limited, Noida on “Future of Mobility Engineering” and
Mr. Manas Tripathi, Manager, MSIL, Gurgaon on “Future
Engine Technologies”. Participants were also given certificate
of participation in the technical talk. Post Lunch there were
sessions on Paper Presentation & Project Exhibition.
The displayed projects were judged by the industry expert
speakers for technical talk and Prof. H. P. Sinha was invited to
become the member of jury for evaluating the research
papers along with Prof. Sanjay Singh, Mr. Anup Kacker, Mr.
Ashish Malik and Mr. Deepak Garg all from the host college.
Results of the competition were compiled and declared in the
valedictory session and the certificate of achievement were
bestowed to the participants by guests. The results are as,
Category Rank Title Institute
Competitive Projects
1 Solar Vehicle ABES,
Ghaziabad
2 Smart Garbage
Collection System ABES,
Ghaziabad
3 Designing of Wheel
Hub ABES,
Ghaziabad
Research Papers
1 Smart Driver’s
Authentication System AKG,
Ghaziabad
2 Nanomaterial in
Lubrication JSSATE, Noida
2
Toll Booth Self-Transactions for
Vehicles Using RFID Enabled Cards
AKG, Ghaziabad
3
Design and Analysis of Air Intake System of SAE Supra Student
Formula Car
AKG, Ghaziabad
NEWS LETTER Page No.
21
SEMINAR:
A seminar on “Finite Element Analysis (FEA) for Automotive
Industry using Simcenter” organized in association with
SIEMENS by SAEINDIA Northern Section (SAEINS) on 19th May
2017 at Gurgaon.
The welcome address was given by Mr. Ajay Pandey of
Siemens & the Inaugural address along with a brief on SAEINS
activities was given by Mr. Sunil Malhotra, Vice Chairman
(Seminar & conferences). To get insight on the impact of
Finite Element Analysis (FEA) for Automotive Industry using
Simcenter in the mobility sector which delivers unmatched
modelling realism and computational performance. This will
help you predict real product behaviour, and put 3D
simulation on the critical path for complex product
development.
The lined-up experts are Mr. Kamanasish Biswas, Mr.
Geetanand Kedilaya and Mr. Khushpreet Singh having
combined experience of 30 plus years who presented the
salient feature & advantages of Simcenter for mobility
experts. The seminar had participation from cross section of
Industries and 3 Colleges with total participation of 38. The
valedictory address was given by Mr. P Panda – Sr. Vice
Chairman SAEINS. Mr. Rakesh Sood – Vice Chairman Student
Activities SAEINS was also present.
SEMINAR:
A seminar on “Bharat Stage VI – How it impacts Testing,
Instrumentation and Development” organized in association
with AVL by SAEINDIA Northern Section (SAEINS) on 19th May
2017 at Gurgaon.
The aim is to get insight on the impact of BS VI on testing
Instrumentation and Development in the mobility sector. A
brief on SAEINS activities was given by Mr. Anup Kacker, ED,
SAEINS.
It is followed by Expert talk by team of experts from AVL
namely Mr. Michael Muehloegger, Global Business Unit
Manager, Measurement &Instrumentation Products, AVL
Graz; Mr. Manoj Kusumba, HOD, Diesel Development, PTE /
DED, AVL India; Mr. Jean Baptiste Paquereau, GM, Engine and
Vehicle Development, AVL India; Mr. Alexander Painsi - BDM,
Emission Instrumentation, AVL Graz; Mr. Marco Schoeggl –
BDM, In-Vehicle Measurement, AVL Graz; Mr. Franz Murr –
BDM, Combustion Measurement, AVL Graz; Mr. Peter
Domjan - Group Product Manager, Consumption
Measurement, AVL Graz.
The seminar had participation from cross section of Industries
and 5 Colleges with total participation of 65.
COLLEGIATE CLUBS VISIT & EXPERT TALK:
On 8th & 15th June 2017 Mr. Anup Kacker, ED, SAEINDAI
Northern Section (SAEINS) visited ABES Engineering College,
Ghaziabad; GL Bajaj Institute, Greater Noida and NIET
College, Greater Noida.
There he briefed about the plans and current activities of
SAEINS to Vice Chairman, Director, Principal, HOD, Faculties
and Key student industries by bringing the students with
requisite skills like Communication, Leadership & Technical
which are needed to them.
NE W S L ET T ER P a g e N o .
22
TECHNICAL LECTURE:
On 15th Sep 2017 SAEINS made a visit to Sanskriti University
and Hindustan College of Science and Technology Mathura on
Engineers Day. Plenary talk was given on “Role Engineers have
to play” by Mr.Anup Kacker, ED, SAEINS. Meeting and
discussions were also held with Vice Chairman and Directors of
respective colleges along with their senior Faculty Advisors /
Head of Department and key student members.
Brief on functioning of SAEINDIA and its Membership benefits
along with how SAEINS is helping student become more
employable by bringing out Industry expectations and gaps and
Skill development like communication skills, leadership skills,
Technical skills etc. which is needed in the students to bridge
the gap between academia and industries. They also were
appraised of Flagship Events planned in near Future like FISITA
World Congress 2018, iTEC 2017 and SAEINDIA Foundation
Awards. The aim of these events is to provide students a
platform for holistic development and showcase their
knowledge and creativity.
COLLEGIATE CLUB ORIENTATION PROGRAM 2017:
SAEINDIA GLBITM COLLEGIATE CLUB organized a felicitation ceremony for members of Team Synergy Racing for their achievement in BAJA SAEINDIA 2017 VIRTUAL held at Chitkara University, Chandigarh in July 2017 followed by unveiling new logo of SAEINDIA GLBITM Club. Mr. Anup Kacker, ED, SAEINS blessed the occasion with his presence as chief guest. The event was inaugurated by Head of the Mechanical Engineering Department Dr. V. R. Mishra by lightening the candle under the blessings of Maa Saraswati followed by his speech on SAEINDIA Collegiate Club and guiding the audience of 250 students to take part in SAEINDIA events.
The ceremony was accompanied by expert lecture by
Mr.Soumen Kundu, MSIL on bridging industry academia gap
followed by guest lecture of Mr. Anup Kacker on introduction
to Automobile Engineering. Mr.Kacker further briefed about
the benefits of joining SAEINDIA.
The memento was presented by Mr. Vinod Kumar Yadav, Sr.
faculty Advisor, SAEINDIA of GLBITM Collegiate club to Mr.
Kacker and his team. Mr. Vinod Yadav and Dr. Ashish Mishra
unveiled the new official logo of the club.
The members and faculty advisor of Team Synergy Racing
were awarded with the certificates by Dr. V. R. Mishra for
their achievement. The event was concluded with
motivational speech and vote of thanks by Mr. Vinod Kumar
Yadav.
TOPTECH SEMINAR:
SAEINS in association with ALTAIR organized a TOPTECH
seminar on "Engineering Synergy with Simulation for OEMs and
Suppliers" on 18th September 2017 at Atrio Hotel, New Delhi.
The Technology showcase was targeted towards CAE/Test
Validation engineers, design engineers involved with Product
Design and FEA from OEMs and their key suppliers. The
seminar was witnessed by 60 participants of both from
Industries and Colleges.
NEWS LETTER Page No.
23
Supported by
K. Venkataraj,
Deputy Director General, SAEINDIA.
D. Seshadhri,
Executive Director, SAEINDIA
Created by
R. Srinivasa Raghavan,
Dy.Manager– Projects, SAEINDIA
The Key Note address was given by Mr. Alok Jaitley – VP, MSIL
& Welcome address by Mr. Pawan Kumar, MD of Altair along
with a brief on SAEINS activities by Mr.Sanjay Gupta, DGM,
MSIL. In this workshop, international speakers of ALTAIR
presented cutting-edge methods, applications and industry
examples of CAE-driven innovations.
In addition, the workshop gave the opportunity to network
with them and help you learn more about latest applications
of Altair's simulation technologies and how leading OEM's /
suppliers are applying latest simulation technologies and
processes in their R&D setups.