53

NF C

onnectors

53

NF Connectors

pages

Latch Header (1.27mm) Right Angle, Solder Dip 54-55

Latch Header (1.27mm) Straight, Solder Dip 56-57

Latch Header (1.27mm) Straight, Solder Dip 58-59

Box Header (1.27mm) Right Angle, Solder Dip 60-61

Box Header (1.27mm) Straight, Solder Dip 62-63

IDC Connectors (1.27mm) Transition Header 64-65

IDC Connectors (1.27mm) IDC Receptacle 66-67

Board to Board Recep. (1.27mm) Through Hole 68-69

Latch Header (1.27mm, Right Angle, Solder Dip)

NFP SERIES

ORDERING INFORMATION

TYPES OF PLATING

CONNECTOR DIMENSIONS (reference only)

NFP- *** A-01 * 2- * -**Header Series

No. of Positions

Terminal Type:2: Right Angle Solder Dip

Blank: 2.7 mm Terminal1: 4.6 mm Terminal

Plating (see below)

1: Short Latch2: Long Latch

Standard Header

CharacteristicsCurrent Rating: 0.5AInsulation Resistance: 1,000M Minimum at 500 VDCWithstanding Voltage: 500 VAC for 1 minuteContact Resistance: 15m Max. at 10mAOperating Temperature: -20˚C ~ +85˚C

Material and FinishInsulator: High Temp Thermoplastic-UL94V-0Contact: Copper AlloyPlating: Mating Face Contacts: Au over Ni

Terminals: Au or SnPb over Ni

Features1. Right-angle terminals2. Short or long latches 3. Long terminal available4. Variety of plating options5. Latches eject receptacle6. Central polarizing key

54

❑ Short Latch

Positions 50, 60, 64, 80,100 available in long terminals† Long Latch

Positions 40, 64, 80, 100 available in long terminals

Connector Outline Dimensions

PCB Layout

NF C

onnectors

NFP SERIES

APPLICABLE DIMENSIONS (reference only)

Latch Header (1.27mm, Right Angle, Solder Dip)

55

X= 6.5 (Short latch type)4.0 (Long latch type)

Y= 2.7 (Short terminal length)4.6 (Long terminal length)

Contact Detail

10, 26, 34, 50 Contacts 16, 20, 40, 60, 64, 80, 100 ContactsNote: Left half of this PCB layout is identical to Section ASection A Section B

56

Latch Header (1.27mm, Straight, Solder Dip)

NFP SERIES

ORDERING INFORMATION

CONNECTOR DIMENSIONS (reference only)

NFP- *** A-01 * 4- * -**Header Series

No. of Positions

Terminal Type:4: Straight Solder Dip

Blank: 2.7 mm Terminal1: 4.6 mm Terminal

Plating (see below)

1: Short Latch2: Long Latch

Standard Header

CharacteristicsCurrent Rating: 0.5AInsulation Resistance: 1,000M Minimum at 500 VDCWithstanding Voltage: 500 VAC for 1 minuteContact Resistance: 15m Max. at 10mAOperating Temperature: -20˚C ~ +85˚C

Material and FinishInsulator: High Temp Thermoplastic-UL94V-0Contact: Copper AlloyPlating: Mating Face Contacts: Au over Ni

Terminals: Au or SnPb over Ni

Features1. Straight terminals2. Short or long latches 3. Long terminal available4. Variety of plating options5. Spring pin for secure mount6. Latches eject receptacle7. Central polarizing key

❑ Short Latch

Positions 26, 34, 40, 50, 80,100 available in long terminals† Long latch

Positions 60, 80,100 available in long terminals

TYPES OF PLATING

57

Connector Outline Dimensions

NF C

onnectors

NFP SERIES

APPLICABLE DIMENSIONS (reference only)

PCB Layout

Latch Header (1.27mm, Straight, Solder Dip)

X= 6.5 (Short latch type)4.0 (Long latch type)

Y= 2.7 (Short terminal length)4.6 (Long terminal length)

Contact Deta i l

10, 26, 34, 50 Contacts 16, 20, 40, 60, 64, 80, 100 ContactsNote: Left half of this PCB layout is identical to Section ASection A Section B

58

Latch Header (1.27mm, Straight Solder Dip)

NFP SERIES

ORDERING INFORMATION

TYPES OF PLATING

CONNECTOR DIMENSIONS (reference only)

NFP- *** A-03 * 4- * -**Header Series

No. of Positions

Terminal Type:4: Straight Solder Dip

Blank: 2.7 mm Terminal1: 4.6 mm Terminal

Plating (see below)

1: Short Latch2: Long Latch

Without Spring Pin Mount

CharacteristicsCurrent Rating: 0.5AInsulation Resistance: 1,000M Minimum at 500 VDCWithstanding Voltage: 500 VAC for 1 minuteContact Resistance: 15m Max. at 10mAOperating Temperature: -20˚C ~ +85˚C

Material and FinishInsulator: High Temp Thermoplastic-UL94V-0Contact: Copper AlloyPlating: Mating Face Contacts: Au over Ni

Terminals: Au or SnPb over Ni

Features1. Straight terminals2. Short or long latches 3. Variety of plating options4. Long terminal available5. Latches eject receptacle6. Central polarizing key

❑ Short Latch

Positions 10, 50, 60, 80,100 available in long terminals† Long Latch

Positions 60, 80, 100 available in long terminals

59

Connector Outline Dimensions

PCB Layout

NF C

onnectors

NFP SERIES

APPLICABLE DIMENSIONS (reference only)

Latch Header (1.27mm, Straight Dip)

Contact Detail

X= 6.5 (Short latch type)4.0 (Long latch type)

Y= 2.7 (Short terminal length)4.6 (Long terminal length)

10, 26, 34, 50 Contacts 16, 20, 40, 60, 64, 80, 100 Contacts

60

Box Header (1.27mm, Right Angle, Solder Dip)

NFP SERIES

ORDERING INFORMATION

TYPES OF PLATING

CONNECTOR DIMENSIONS (reference only)

NFP- ** A-013 2- **Header Series

No. of Positions

Plating (see below)

Terminal Type:2: Right Angle Solder Dip

Box Header

CharacteristicsCurrent Rating: 0.5AInsulation Resistance: 1,000M Minimum at 500 VDCWithstanding Voltage: 500 VAC for 1 minuteContact Resistance: 15m Max. at 10mAOperating Temperature: -20˚C ~ +85˚C

Material and FinishInsulator: High Temp Thermoplastic-UL94V-0Contact: Copper AlloyPlating: Mating Face Contacts: Au over Ni

Terminals: Au or SnPb over Ni

Features1. Right-angle terminals2. Variety of plating options3. Central polarizing key

Connector Outline Dimensions

PCB Layout

NF C

onnectors

NFP SERIES

APPLICABLE DIMENSIONS (reference only)

Box Header (1.27mm, Right Angle, Solder Dip)

61

Contact Detail

26, 34, 50 Contacts16, 20, 40, 60, 80 Contacts

Note: Left half of this PCB layout is identical to Section A

Section A Section B

62

Box Header (1.27 mm, Straight Solder Dip)

NFP SERIES

ORDERING INFORMATION

TYPES OF PLATING

CONNECTOR DIMENSIONS (reference only)

CharacteristicsCurrent Rating: 0.5AInsulation Resistance: 1,000M Minimum at 500 VDCWithstanding Voltage: 500 VAC for 1 minuteContact Resistance: 15m Max. at 10mAOperating Temperature: -20˚C ~ +85˚C

Material and FinishInsulator: High Temp Thermoplastic-UL94V-0Contact: Copper AlloyPlating: Mating Face Contacts: Au over Ni

Terminals: Au or SnPb over Ni

Features1. Straight terminals2. Variety of plating options3. Central polarizing key

NFP- ** A-013 4- **Header Series

No. of Positions

Plating (see below)

Terminal Type:4: Straight Solder Dip

Box Header

Connector Outline Dimensions

PCB Layout

NF C

onnectors

NFP SERIES

APPLICABLE DIMENSIONS (reference only)

Box Header (1.27mm, Straight Solder Dip)

63

Contact Detail

26, 34, 50 Contacts 16, 20, 40, 60, 80 ContactsNote: Left half of this PCB layout is identical to Section A

Section A Section B

64

IDC Transition Header (1.27 mm)

NFP SERIES

ORDERING INFORMATION

TYPES OF PLATING

APPLICABLE CABLES

CONNECTOR DIMENSIONS (reference only)

NFP- *** G- 0100- **Header Series

No. of Positions

Plating (see below)

3.3mm Terminal Length

Transition Header

CharacteristicsCurrent Rating: 1AInsulation Resistance: 1,000M Minimum at 500 VDCWithstanding Voltage: 500 VAC for 1 minuteContact Resistance: 15m Max. at 10mAOperating Temperature: -20˚C ~ +85˚C

Material and FinishInsulator: High Temp Thermoplastic-UL94V-0Contact: Copper AlloyPlating: Mating Face Contacts: Au over Ni

Terminals: Au or SnPb over Ni

Features1. Unique three-fork IDC contact allows

termination of 0.635mm pitch flat cable2. Various plating options

• Solid Wire AWG 30• Stranded Wire AWG 30• Cable Spacing (0.635mm)

Connector Outline Dimensions

PCB Layout

NF

Connectors

NFP SERIES

APPLICABLE DIMENSIONS (reference only)

IDC Transition Header (1.27mm)

65

Contact Detail

66

IDC Receptacle (1.27 mm)

NFS SERIES

ORDERING INFORMATION

TYPES OF PLATING

APPLICABLE CABLES

CONNECTOR DIMENSIONS (reference only)

NFS- *** A-011 * - **Socket Series

No. of Positions

0: Without Strain Relief1: With Strain Relief

Plating (see below)

1: With polarity Key

Standard Socket

CharacteristicsCurrent Rating: 1AInsulation Resistance: 1,000M Minimum at 500 VDCWithstanding Voltage: 500 VAC for 1 minuteContact Resistance: 15m Max. at 10mAOperating Temperature: -20˚C ~ +85˚C

Material and FinishInsulator: High Temp Thermoplastic-UL94V-0Contact: Copper AlloyPlating: Mating Face Contacts: Au over Ni

Terminals: Au or SnPb over NiAccessories Strain Reliefs (see page 86)

Features1. IDC contact allows termination of

0.635mm pitch flat cable2. Strain relief available to prevent kinking

and caving3. Plating options available4. Central polarizing key

Receptacle

Strain Relief

• Solid Wire AWG 30• Stranded Wire AWG 30• Cable Spacing (0.635mm)

67

Connector Outline Dimensions

NF

Connectors

NFS SERIES

APPLICABLE DIMENSIONS (reference only)

IDC Receptacle (1.27mm)

Contact Detail

68

Board to Board Receptacle (1.27 mm)

NFS SERIES

ORDERING INFORMATION

TYPES OF PLATING

CONNECTOR DIMENSIONS (reference only)

NFS- ** A-131 4- **Socket Series

No. of Positions

Terminal Type:4: Straight Solder Dip

Plating (see below)

With Polarity Key

CharacteristicsCurrent Rating: 1AInsulation Resistance: 1,000M Minimum at 500 VDCWithstanding Voltage: 500 VAC for 1 minuteContact Resistance: 15m Max. at 10mAOperating Temperature: -20˚C ~ +85˚C

Material and FinishInsulator: High Temp Thermoplastic-UL94V-0Contact: Copper AlloyPlating: Mating Face Contacts: Au over Ni

Terminals: Au or SnPb over Ni

Features1. Straight terminals2. Terminal length (2.7mm)

Connector Outline Dimensions

PCB Layout

NF

Connectors

NFS SERIES

APPLICABLE DIMENSIONS (reference only)

Board to Board Receptacle (1.27mm)

69

Contact Detail