NHIM V CA HAI NC
PRODUCT PROFILE
www.ipc-wiremesh.com.vn
www.luoithephanipc.com.vn
Email:[email protected]
Hotline: 0904213636
2
CONTENT
1
1
1
2
1
3
1
4
WELDED WIRE MESH - IPC-WIREMESH TM
OTHER PRODUCTS
2
1
4
1
4
1
5
PROFILED STEEL DECKING - IPC-DECK TM
IPC-WIREMESH TM
3
IPC Welded Wire Mesh introduction
IPC Welded Wire Mesh is a combination of horizontally and
transversely placed cold-drawn wires at right angles to each
other.
The joints of the wires are then welded automatically by the
principle of combining melting and pressurizing, to uniformly
create high strength high quality wire mesh.
Deformed Bar Welded Wire Mesh
Round Bar Welded Wire Mesh
4
TECHINICAL SPECIFICATION
5
TECHINICAL SPECIFICATION
IPC-WIREMESH DIAGRAM
6
Vietnam Standard TCVN 9391:2012, Welded fabric for the
reinforcement of concrete
Vietnam Standard TCVN 6288:1997, Cold-drawn steel bar for the
reinforcement of concrete
Vietnam Standard TCVN 1651-3:2008 (ISO 6935-3:1992) Steel for
the reinforcement of concrete Welded fabric
British Standard BS 4482:1985, Specification for cold reduced
steel wire for the reinforcement of concrete
British Standard BS 4483:1998, Steel fabric for the
reinforcement of concrete
Singapore Standard SS1:1999, Cold reduced steel wire for the
reinforcement of concrete
Singapore Standard SS32:1999, Steel fabric for the reinforcement
of concrete
Australian Standard TA/TV/4671, Cold reduced steel wire for the
reinforcement of concrete
APPLIED STANDARD
STTDescribed parameterSymbol1 Length of meshL2 Width of meshB3
Size of meshL x B4 Main wire diameterDd5 Cross wire diameterDn6
Main wire pitchPd7 Cross wire pitchPn8 Size of one rectangle
sectionPd x Pn9 Vertical overhang sectionM1, M2 10 Horizontal
overhang sectionS1, S2
6
7
LAPPING
Full yield strength layered lap
Half yield strength layered lap
Flying end lap
Laps are used to transfer load across continuous steel
reinforcements. In order to do so, standardized length of laps is
required
CONVERTING WIRE ROD TO WELDED WIRE MESH FORMULA
8
9
IPC-WIREMESH APPLICATION
- Surface platforms, building floors, building roofs
- Concrete walls
- Sewer systems
- Foundations, sidewalks, roads
- Pools, water tanks
- Barriers, fences
- Many other applicable structures
10
IPC-DECKTM INTRODUCTION
IPC Steel deck floors consist of profiled steel sheets and
concrete filling, are used to substitute reinforced concrete and/or
scraffold.
Structural design of steel deck floors consists of wave-like
zinc-galvanized steel sheets, onto which are triangle or round
section steel joists, welded altogether
IPC-DECK FOR INDUSTRIAL FACILITIES
IPC-DECK TM 2WB 51-1025
Thickness (mm)Weight (kg/m2)Material
standardCoating10.87.471.JIS G3302:SGC340-5702.ASTM
A653:SS230-5501.JIS G3302:Z80-Z2752.ASTM
A653:Z90-Z27521.09.3431.211.2041.514.00
11
IPC-DECK TM 2WB 50-930
Thickness (mm)Weight (kg/m2)Material
standardCoating10.88.231.JIS G3302:SGC340-5702.ASTM
A653:SS230-5501.JIS G3302:Z80-Z2752.ASTM
A653:Z90-Z27521.010.2931.212.3541.515.43
12
IPC-DECK FOR INDUSTRIAL FACILITIES
IPC-DECK FOR HIGH-RISE BUILDING FLOORS
IPC-DECK TM 2WB 51-600
Thickness (mm)Weight (kg/m2)Material
standardCoating10.810.471.JIS G3302:SGC340-5702.ASTM
A653:SS230-5501.JIS G3302:Z80-Z2752.ASTM
A653:Z90-Z27521.013.0831.215.0741.519.63
13
IPC-DECK FOR THERMAL POWERPLANTS, REFINERIES
IPC-DECK TM 2WB 50-818
Thickness (mm)Weight (kg/m2)Material
standardCoating10.88.861.JIS G3302:SGC340-5702.ASTM
A653:SS230-5501.JIS G3302:Z80-Z2752.ASTM
A653:Z90-Z27521.011.0731.213.2941.516.60
14
IPC-DECK TM 3WB 76-600
Thickness (mm)Weight (kg/m2)Material
standardCoating10.810.471.JIS G3302:SGC340-5702.ASTM
A653:SS230-5501.JIS G3302:Z80-Z2752.ASTM
A653:Z90-Z27521.013.0831.215.0741.519.63
15
IPC-DECK FOR THERMAL POWERPLANTS, REFINERIES
16
IPC-DECK ACCESSORIES
17
IPC-DECK CALCULATION FORMULAS
18
PANEL PANEL
DECK JOINT
PANEL JOIST DECK JOINT
Screwing method
Welding method
19
PROPPING
Depending on the span of the deck panel, temporary propping may
be needed when constructing IPC-DECK. Following is some advice of
propping methods.
20
NOTES WHILE CONTRUCTING IPC-DECK
Delivering IPC-DECK Panels, by specific transportations
Lifting IPC DECK panels
Stocking IPC-DECK panels, to prevent moist and create
ventilation
21
NOTES WHILE FILLING CONCRETE FOR COMPOSITE MATERIAL WITH
IPC-DECK
Do not directly step on the panels as they could be
deformedPlace hard boards above for walking surface
Start raking as soon as the concrete is poured out
OTHER PRODUCTS
GALVANIZED STEEL WIRE
22
WIRE ROD
COLD DRAWN STEEL WIRE
1.0 MM WIRE
23
PLASTIC COATED STEEL WIRE
OTHER PRODUCTS
