Upload
marvin-morton
View
332
Download
2
Tags:
Embed Size (px)
Citation preview
Non-renewable energy resources
•
coal
oilnatural gas
nuclear
U.S. Energy FAQs
Natural gas
Nuclear…
…not nucular!
Extracting requires digging holes…big holes
Giant holes!!!
truck
Equipment to do the job.
car
Why do you think this is being done to the Earth?
IN THE NAME OF
AND
MINERAL RESOURCE
• Material found naturally in or on the crust of the Earth that can be extracted and processed into products useful to humans at an affordable cost $$$
NONRENEWABLE MINERAL RESOURCES
• Metallic mineral resources– iron, copper, aluminum
• Non-metallic mineral resources– Salt, clay, sand,
phosphates, soil
• Energy resources– Coal, oil, natural gas,
uranium
ORE
• Rock that contains enough of 1+ metallic minerals that can be mined for a profit.– We use and discard materials made from
ore…– Now we are learning to reuse or recycle
products made from ore and be less wasteful overall
2 Categories of Nonrenewable Mineral Resources
• Identified resources– Deposits with a known
location, quantity, and quality
OR– Deposits based on
direct geological evidence and measurements
• Undiscovered resources– Potential supplies are
assumed to exist via geological knowledge and theory
HOWEVER…– Their location,
quantity, and quality are unknown
What about the
RESERVES
An identified usable nonrenewable mineral resource that can be extracted profitably ($$$) at current prices
OTHER RESOURCES
•An identified or undiscovered resource NOT classified as reserves (not profitable)
•How can we get more reserves?
?
How are these buried resources found?
• Aerial planes and satellite images reveal outcrops of certain minerals
• Radiation measuring equipment detects deposits of radioactive metals (Uranium)
• A magnetometer measures changes in the Earth’s magnetic field (iron ore)
• A gravimeter measures differences in gravity (detects density differences between ore and surrounding rock)
• Drill a deep well to extract minerals
Still looking for deposits…
• Place sensors which detect electrical resistance or radioactivity in existing wells to find oil and natural gas
• Perform seismic surveys on land and sea by sending shock waves to obtain information of buried rock layers
• Perform chemical analysis of water and plants to detect deposits of ground minerals that leached into nearby bodies of water or have been absorbed by plant tissues
Removal of mineral deposits depend on…
• Deep or shallow deposit?
• Flat or hilly terrain
•Coal, iron, silt, clay, uranium, oil, etc.
&
SURFACE MINING-Used to remove
• Mechanical equipment removes soil and rock (overburden) and throws away this waste material (spoil).
OPEN-PIT MINING
Dig a hole and remove ores - iron, copper, sand, gravel and stone (limestone & marble)
Tilconhttp://www.tilconny.com/
DREDGING
• Use of chain buckets and draglines to scrape up underwater mineral deposits
Dredging Equipment
AREA STRIP MINING
• Overburden on flat terrain is removed
• Mineral deposits are removed• Trench filled with overburden
and a new cut is made parallel to the previous cut (and repeat…)
CONTOUR STRIP MINING
• Terraces are cut into a hillside or mountainous terrain and overburden is removed
• Coal is extracted and the overburden from the new terrace is dumped onto the one below it.
A Picture of Contour Strip Mining
Mountaintop Removal
• Explosives, shovels, and draglines remove the tops of mountains and expose the coal beneath
• Environmental Damage?
• As of 2002 – Pres. Bush allowed rock and dirt from this type of mining of coal to be dumped into streams and valleys.
WHAT are the pros and cons of surface mining?
• PROS– QUICKER– CHEAPER– LESS DANGEROUS
THAN SUB-SURFACE MINING
• CONS– LOTS OF HABITAT
DEGREDATION– LOTS OF WASTE
MATERIAL = USELESS OVERBURDEN = SPOIL
• The Surface Mining Control and Reclamation Act of 1977 requires mining companies to restore most surface mined land to be used for the same purpose as before it was mined
• More than 6000 abandoned coal and metal mines have not been restored (an area of land about the size of Virginia)
AND
• Larger areas of abandoned rock quarries and gravel and sand mines have not yet been reclaimed!
• WHY NOT???
SUBSURFACE MINING– Used to remove
• Dig a deep vertical shaft• Blast away tunnels and chambers
to get to the deposit. • Machines remove the ore and
coal and bring it to the surface.• the sand hog project
Oil and Natural Gas
Natural Gas
Nuclear Power
What are the pros and cons of subsurface mining?
• PROS– Less habitat degr. B/c
less land is used on top
– 1/10 land is disrupted as surface mining
– Less waste produced– No need to fill
in/reclaim area
• CONS– INJURY rate VERY
HIGH!– Poor air quality =
many respiratory infections
– VERY EXPENSIVE– Land above you can
collapse and you could die b.c.of explosives
What are the ENVIRONMENTAL What are the ENVIRONMENTAL IMPACTS of Mining?IMPACTS of Mining?
Scarring of the land surfaceScarring of the land surface Consumes a LOT of Consumes a LOT of energyenergy to find, to find,
extract and transport mineral extract and transport mineral resourcesresources
Collapse or subsidence of land above Collapse or subsidence of land above underground mines resulting inunderground mines resulting in– Tilted homes and buildingsTilted homes and buildings– Sewage lines crackSewage lines crack– Gas mains breakGas mains break– Groundwater systems are disruptedGroundwater systems are disrupted
There’s more…There’s more…
Toxic chemicals are emitted into the Toxic chemicals are emitted into the atmosphere, (more than any other industry)atmosphere, (more than any other industry)
Acid mine drainageAcid mine drainage Carries sulfuric acid to nearby streams and enters Carries sulfuric acid to nearby streams and enters
groundwater reservesgroundwater reserves Contaminates water suppliesContaminates water supplies Destroys aquatic lifeDestroys aquatic life
Wildlife exposed to toxic mining wastesWildlife exposed to toxic mining wastes
More Environmental ImpactsMore Environmental Impacts
Piles of waste are called Piles of waste are called tailingstailings After the wastes are removed the ore is After the wastes are removed the ore is smeltedsmelted to to
separate the metal from the other elements in the ore.separate the metal from the other elements in the ore. These smelters give off a LOT of air pollutants that These smelters give off a LOT of air pollutants that
negatively impact the plants and soil surrounding the negatively impact the plants and soil surrounding the areaarea
Water pollution is also ever-present which produces Water pollution is also ever-present which produces liquid and sold hazardous wastes that needs to be liquid and sold hazardous wastes that needs to be disposed of properly.disposed of properly.
Technology to the rescue:
• Reduce pollution from smelting
• Lower production costs of getting the minerals
• Saving $ on cleanup costs
• Decrease liability for damages
TaDa…The Final Product
• Pure metal is produced from smelting
• Desired products are manufactured
• Product is used and then what???
To SUMMARIZE…
• Remove and process ores• Make metals (uses a LOT of ENERGY)• Air and water gets polluted• GHG’s released into the atmosphere• We get the products we WANT…or do we
NEED them?• New advances in tech. arise and we
demand bigger, smaller, better, faster products…and so the cycle continues…