Upload
others
View
15
Download
0
Embed Size (px)
Citation preview
NORD COMPOSITES ITALIA è una azienda che fa parte della HOL-DING GERARD LAVENS che svilup-pa un fatturato di 100 milioni di Euro e rappresenta un importante realtà nel panorama della chimica europea.
Il gruppo è composto da diverse società che operano su diverse unità produttive tra loro integrate, situate in Francia, Inghilterra e Italia, rispettando severi criteri di qualità per soddisfare le sempre maggiori esigenze qualitati-ve richieste dai principali utilizzatori a livello europeo.
Lo stabilimento della NORD COM-POSITES ITALIA uno tra i più avanzati tecnologicamente e produttivamente in Europa - occupa una superficie di 35.000 m2 ed è situato a Monfalcone (GO) dove c’è anche la sede ammini-strativa.
NORD COMPOSITES ITALIA ha costruito nel tempo una estesa espe-rienza nello sviluppo e nella produ-zione di:
RESINE PER IL SETTOREDEL COATINgS- ALCHIDICHE- POLIESTERI INSATURI- POLIESTERI SATURI OIL FREE
RESINE PER IL SETTORE DEI POLIuRETANI- POLIESTERI SATURI
RESINE PER COMPOSITI- POLIESTERI INSATURI
All’interno di questo catalogo è possibile trovare le principali caratte-ristiche tecniche dei vari prodotti che rappresentano soluzioni idonee per le varie applicazioni.
NORD COMPOSITES ITALIA is a part of HOLDING GERARD LAVENS Group which with 100 millions of Euro turnover, represents an important reality within the European chemical market.
The group is composed by companies operating with different productive units located in France, England and Italy and integrated each other, respecting severe quality standards to satisfy the always more stringent request of the main users at European level.
The NORD COMPOSITES ITALIA factory - one of the most technologi-cally advanced in Europe - has a sur-face of 35.000 square meters and is located in Monfalcone (GO) where is the head office.
NORD COMPOSITES ITALIA has built up a vast experience in the devel-opment and production of:
RESINS FOR COATINGS- ALkyDS- UNSATURATED pOLyESTERS- SATURED pOLyESTERS OIL FREE
RESINS FOR POLYURETHANES- SATURATED pOLyESTERS
RESINS FOR COMPOSITES- UNSATURATED pOLyESTERS
Inside this catalogue it is possible to find the main technical features and specifications of the various products of the range fulfilling all the different needs of the various applicative process.
A tutela della costanza qualitativa della produzione NORD COMPO-SITES ITALIA, tutte le operazioni, dal dosaggio delle materie prime, alle ope-razioni dei reattori e di blending sono monitorate accuratamente e control-late in modo da garantire la massima qualità dell’intera catena produttiva, seguendo e soddisfacendo i più severi standard certificativi.
NORD COMPOSITES ITALIA possiede laboratori altamente qualifi-cati, strumentazioni e apparecchiatu-re specifiche per tutti i controlli, dalle materie prime ai prodotti finiti.
NORD COMPOSITES ITALIA nel-la sua attività opera con la massima responsabilità e sensibilità nei con-fronti della salute dei propri operatori, dei propri clienti e della tutela dell’am-biente in modo da rispettare le severe leggi ambientali in materia.
4
To ensure and guarantee an accu-rate quality constancy of the NORD COMPOSITES ITALIA production, all operations, from the dosing of raw materials to the reactors operations and the blendings are constantly mon-itored and controlled so to guarantee the highest quality and constancy of the whole productive chain, following and satisfying the most severe certifi-cation standards.
NORD COMPOSITES ITALIA has highly qualified laboratories, and spe-cial equipment for all controls, from raw materials to finished products.
NORD COMPOSITES ITALIA and its Management operate with the max-imum responsibility towards the health and safety of its own operators, of cus-tomers and the environment, keeping the satisfaction of its shareholders as one of the main priorities in its day by day activity.
5
resineresins
I NOSTRI PRODOTTIOUR PRODUCTS
ADICROL Poliesteri saturi
Saturated polyesters
POLYKYD Alchidiche: corto olio, medio olio, lungo olio, tixotropiche
Alkyds: short oil, medium oil, long oil, Thixotropic
FENAPOL Poliesteri Insaturi per Coatings Poliesteri Insaturi per compositi Poliesteri Saturi Oil Free
Unsaturated Polyesters for Coatings Unsaturated Polyesters for Composites Oil Free saturated Polyesters
RESINE POLIESTERE SATURESATURED POLYESTER RESINS
APPLICAZIONI PRINCIPALIMAIN APPLICATIONS
SCHIUME FLESSIBILI E RIGIDEFLEXIBLE AND RIGID FOAMS
ELASTOMETRI PER COLATA E TPUCASTING ELASTOMERS AND TPU
SPALMATI POLIURETANICIPOLYURETHANE COATING
ADESIVI POLIURETANICIPOLYURETHANE ADHESIVES
SISTEMI POLIURETANICI PER L’INDUSTRIA CALZATURIERAPOLYURETHANE SYSTEMS FOR FOOTWEAR INDUSTRY
8
9
10
11
12
ADICROLelencoproduct guide
resine resins
ADICROL R 213
ADICROL R 60
CodiceCode
Aromatico /Alifatico
Aromatic /Aliphatic
AlifaticoAliphatic
MPG
DEG
Altamente ramificato
Highly branched
RamificatoBranched
LiquidoLiquid
LiquidoLiquid
205 - 221
59 - 63
≤ 3
≤ 1,7
22000(25°C)
9500 - 10500(35°C)
≤ 0,1
≤ 0,1
≤ 250
≤ 150
Acid
i / A
nidr
idi
Acid
s / A
nhyd
rides
Glic
oli p
rinci
pali
Mai
n gl
ycol
s
Stru
ttura
Stru
ctur
e
Aspe
ttoAp
pear
ance
Num
ero
di o
ssid
rile
OH n
umbe
r
Num
ero
d’ac
ido
Acid
num
ber
Visc
osità
Bro
okfie
ld
(tem
pera
tura
)Br
ookfi
eld
visc
osity
(te
mpe
ratu
re)
Cont
enut
o di
acq
uaW
ater
con
tent
Colo
re H
azen
Haze
n co
lour
mg KOH/g mg KOH/g mPa·s %Campi di impiegoField of use
SCHIuME Pu FLESSIBILIFLEXIBLE pU FOAMS
Usato soprattutto in miscela (fino ad un massimo del 50%) con altri tipi di poliestere tipo Adicrol R 60 per ottenere schiume semirigide con un basso livello di scorching.
Mainly used blended (up to 50%) with other polyester polyols, e.g. Adicrol R 60, to obtain low scorchingsemi-rigid foams.
Usato nella produzione di schiume in bloccoflessibili per applicazioni soprattutto nel campodel tessile (esempio Laminazioni a fiamma).
Used in flexible slabstock foam production, mainly for textile industry applications (e.g. flame lamination).
Le informazioni contenute in questo foglio informativo sono basate su dati di laboratorio e sulla nostra esperienza. Riteniamo che queste informazioni siano attendibili, ma non pos-siamo garantire la loro applicabilità nel vostro processo. Non ci assumiamo alcuna responsabilità per eventi che possano verificarsi per usi impropri del prodotto stesso. L’utilizzatore, accettando i prodotti in essa descritti, accetta la responsabilità di testare esaurientemente qualsiasi applicazione prima di iniziare la produzione. Le nostre raccomandazioni non devono essere recepite come istigazione a violare alcun brevetto o legge, codice di sicurezza o norma assicurativa.
The information contained in this datasheet is based on laboratory data and our experience. We believe this information to be reliable, however we cannot guarantee its applicability in your process. We decline all responsibility for events that may arise as a consequence of improper use of the product. By accepting the products described herein, the user accepts the responsibility to thoroughly test any application before commencing production. Our advice should not be taken as encouragement to breach any patent, law, safety code or insurance regulation.
ApplicazioneApplication
ADICROL FDA 240
ADICROL FD 250
ADICROL FD 315
AromaticoAromatic
AromaticoAromatic
AromaticoAromatic
DEG, modificato
DEG,modified
DEG
DEG
LineareLinear
LineareLinear
LineareLinear
LiquidoLiquid
LiquidoLiquid
LiquidoLiquid
230 - 250
230 - 270
300 - 330
≤ 1
≤ 3
≤ 3
6000 - 8000 (25°C)
3800 - 4200 (25°C)
2000 - 3000 (25°C)
≤ 0,1
≤ 0,15
≤ 0,15
≤ 6 (Gardner)
≤ 3 (Gardner)
≤ 3 (Gardner)
Acid
i / A
nidr
idi
Acid
s / A
nhyd
rides
Glic
oli p
rinci
pali
Mai
n gl
ycol
s
Stru
ttura
Stru
ctur
e
Aspe
ttoAp
pear
ance
Num
ero
di o
ssid
rile
OH n
umbe
r
Num
ero
d’ac
ido
Acid
num
ber
Visc
osità
Bro
okfie
ld
(tem
pera
tura
)Br
ookfi
eld
visc
osity
(te
mpe
ratu
re)
Cont
enut
o di
acq
uaW
ater
con
tent
Colo
re H
azen
Haze
n co
lour
mg KOH/g mg KOH/g mPa·s %Campi di impiegoField of use
SCHIuME Pu RIgIDERIGID pU FOAMS
Caratterizzati da bassa viscosità.Usati nelle formulazioni PIR (polisocianurati)per migliorare la resistenza al fuocoe l’isolamento termico.
Low viscosity. Used in PIR (polyisocyanurates)to improve fire-resistance and thermal insulation.
ApplicazioneApplication
CodiceCode
8
resine resins
ADICROL BM 55
ADICROL BM 56
ADICROL BM 57 S
ADICROL LM 56
ADICROL LM 112
ADICROL B 38
ADICROL B 55
ADICROL B 112
ADICROL AE 38
ADICROL AE 56
CodiceCode
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
1,4-BDO, MEG
1,4-BDO, MEG
1,4-BDO, MEG
MEG
MEG
1,4-BDO
1,4-BDO
1,4-BDO
1,6esandiolohexanediol
1,6esandiolohexanediol
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LineareLinear
SolidoSolid
SolidoSolid
SolidoSolid
SolidoSolid
SolidoSolid
SolidoSolid
SolidoSolid
SolidoSolid
SolidoSolid
SolidoSolid
54 - 58
54 - 58
54 - 58
54 - 58
108 - 116
37 - 40
54 - 58
108 - 116
36 - 40
54 - 58
≤ 0,7
≤ 0,7
≤ 0,5
≤ 0,7
≤ 0,7
≤ 0,5
≤ 0,7
≤ 0,7
≤ 0,5
≤ 0,5
4500 - 5400 (35°C)
4400 - 5200 (35°C)
4000 - 5100 (35°C)
460 - 600 (75°C)
450 - 650 (50°C)
2500 - 4000 (60°C)
1300 - 1500 (60°C)
300 - 500 (60°C)
1500 - 1900 (70°C)
560 - 760 (70°C)
≤ 0,05
≤ 0,1
≤ 0,1
≤ 0,1
≤ 0,08
≤ 0,1
≤ 0,1
≤ 0,05
≤ 0,1
≤ 0,1
≤ 70
≤ 100
≤ 150
≤ 100
≤ 100
≤ 40
≤ 60
≤ 50
≤ 100
≤ 100
Acid
i / A
nidr
idi
Acid
s / A
nhyd
rides
Glic
oli p
rinci
pali
Mai
n gl
ycol
s
Stru
ttura
Stru
ctur
e
Aspe
ttoAp
pear
ance
Num
ero
di o
ssid
rile
OH n
umbe
r
Num
ero
d’ac
ido
Acid
num
ber
Visc
osità
Bro
okfie
ld
(tem
pera
tura
)Br
ookfi
eld
visc
osity
(te
mpe
ratu
re)
Cont
enut
o di
acq
uaW
ater
con
tent
Colo
re H
azen
Haze
n co
lour
mg KOH/g mg KOH/g mPa·s %Campi di impiegoField of use
ELASTOMERI PER COLATA E TPu CASTING ELASTOMERS AND TpU
Hanno ottime proprietà meccaniche e fisichee possono essere usati nella produzionedi elastomeri per colata e TPU.
Very good physical and mechanical properties. Can be used to produce cast elastomers and TPU (thermoplastic polyurethane elastomers).
Le informazioni contenute in questo foglio informativo sono basate su dati di laboratorio e sulla nostra esperienza. Riteniamo che queste informazioni siano attendibili, ma non pos-siamo garantire la loro applicabilità nel vostro processo. Non ci assumiamo alcuna responsabilità per eventi che possano verificarsi per usi impropri del prodotto stesso. L’utilizzatore, accettando i prodotti in essa descritti, accetta la responsabilità di testare esaurientemente qualsiasi applicazione prima di iniziare la produzione. Le nostre raccomandazioni non devono essere recepite come istigazione a violare alcun brevetto o legge, codice di sicurezza o norma assicurativa.
The information contained in this datasheet is based on laboratory data and our experience. We believe this information to be reliable, however we cannot guarantee its applicability in your process. We decline all responsibility for events that may arise as a consequence of improper use of the product. By accepting the products described herein, the user accepts the responsibility to thoroughly test any application before commencing production. Our advice should not be taken as encouragement to breach any patent, law, safety code or insurance regulation.
ApplicazioneApplication
9
Sono buoni prodotti dalle buone proprietà generali, che combinano prezzi competitivi con buone prestazioni. Possono essere usati con NDI o MDI per produzioni di elastomeri per colata o con solo MDI per la produzione di TPU.
Good general properties. These products combine competitive prices and good performances. They can be used with NDI or MDI to produce cast elastomers or with MDI in the production of TPU.
Hanno ottime proprietà fisiche e meccaniche unite ad una buona resistenza all’idrolisi. Possono essere usati per la produzionedi elastomeri per colata e TPU.
Very good physical and mechanical properties. Good hydrolysis resistance. They can be used to produce cast elastomers and TPU.
Posseggono eccezionali proprietà fisiche emeccaniche particolarmente a basse temperature, assieme ad una buona resistenza all’idrolisi. Ven-gono usati maggiormente per la produzione di TPU.
Excellent physical and mechanical properties, especially at low temperature. Good hydrolysis resistance. Mainly used in the production of TPU.
resine resins
ADICROL L 56 MB
ADICROL BM 57
ADICROL B 38
ADICROL B 55
ADICROL B 112
ADICROL BN 56
ADICROL BN 112
ADICROL AIE 35
ADICROL AIE 56
ADICROL EN 120
ADICROL LD 40
ADICROL LD 280
CodiceCode
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
Aromatico /Alifatico
Aromatic /Aliphatic
Aromatico /Alifatico
Aromatic /Aliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
MEG, DEG
1,4-BDO, MEG
1,4-BDO
1,4-BDO
1,4-BDO
1,4-BDO, NPG
1,4-BDO, NPG
1,6esandiolohexanediol
1,6esandiolohexanediol
1,6esandiolo,
NPGhexanediol,
NPG
DEG
DEG
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LineareLinear
SolidoSolid
SolidoSolid
SolidoSolid
SolidoSolid
SolidoSolid
LiquidoLiquid
LiquidoLiquid
SolidoSolid
SolidoSolid
SolidoSolid
LiquidoLiquid
LiquidoLiquid
54 - 58
54 - 58
37 - 40
54 - 58
108 - 116
54 - 58
108 - 116
33 - 37
54 - 58
116 - 124
38 - 42
271 - 289
≤ 0,5
≤ 0,5
≤ 0,5
≤ 0,7
≤ 0,7
≤ 0,5
≤ 0,7
≤ 0,7
≤ 0,8
≤ 0,6
≤ 0,8
≤ 0,8
4200 - 4700 (35°C)
4500 - 4750 (35°C)
2500 - 4000 (60°C)
1300 - 1500 (60°C)
300 - 500 (60°C)
8200 - 9800 (35°C)
1800 - 2600 (35°C)
5100 - 7000 (70°C)
900 - 1300 (75°C)
300 - 400 (60°C)
7000 - 8000 (35°C)
280 - 380 (25°C)
≤ 0,04
≤ 0,1
≤ 0,1
≤ 0,1
≤ 0,05
≤ 0,1
≤ 0,08
≤ 0,08
≤ 0,08
≤ 0,1
≤ 0,08
≤ 0,08
≤ 150
≤ 50
≤ 40
≤ 60
≤ 50
≤ 100
≤ 100
≤ 200
≤ 150
≤ 120
≤ 100
≤ 100
Acid
i / A
nidr
idi
Acid
s / A
nhyd
rides
Glic
oli p
rinci
pali
Mai
n gl
ycol
s
Stru
ttura
Stru
ctur
e
Aspe
ttoAp
pear
ance
Num
ero
di o
ssid
rile
OH n
umbe
r
Num
ero
d’ac
ido
Acid
num
ber
Visc
osità
Bro
okfie
ld
(tem
pera
tura
)Br
ookfi
eld
visc
osity
(te
mpe
ratu
re)
Cont
enut
o di
acq
uaW
ater
con
tent
Colo
re H
azen
Haze
n co
lour
mg KOH/g mg KOH/g mPa·s %Campi di impiegoField of use
SPALMATI POLIuRETANICI pOLyURETHANE COATING
Usati nella produzione di PU in dispersione acquosa per il finissaggio delle pelli.Eccellenti proprietà fisico-meccaniche con un’alta resistenza all’idrolisi.
Used in the production of water-based PU dispersions for leather finishing. Excellent physical and mechanical properties; high hydrolysis resistance.
Usato principalmente per la produzione di PU in soluzione per spalmatura e resinatura diretta.
Mainly used in the production of PU in solutionfor coating and direct coating.
Le informazioni contenute in questo foglio informativo sono basate su dati di laboratorio e sulla nostra esperienza. Riteniamo che queste informazioni siano attendibili, ma non pos-siamo garantire la loro applicabilità nel vostro processo. Non ci assumiamo alcuna responsabilità per eventi che possano verificarsi per usi impropri del prodotto stesso. L’utilizzatore, accettando i prodotti in essa descritti, accetta la responsabilità di testare esaurientemente qualsiasi applicazione prima di iniziare la produzione. Le nostre raccomandazioni non devono essere recepite come istigazione a violare alcun brevetto o legge, codice di sicurezza o norma assicurativa.
The information contained in this datasheet is based on laboratory data and our experience. We believe this information to be reliable, however we cannot guarantee its applicability in your process. We decline all responsibility for events that may arise as a consequence of improper use of the product. By accepting the products described herein, the user accepts the responsibility to thoroughly test any application before commencing production. Our advice should not be taken as encouragement to breach any patent, law, safety code or insurance regulation.
ApplicazioneApplication
10
Eccellente resistenza all’idrolisi con buonaflessibilità ad un largo range di temperatura.
Excellent hydrolysis resistance and good flexibilityin a wide temperature range.
Usato principalmente per la produzione di PU in soluzione per spalmatura e coagulazione. Ottime proprietà fisico/meccaniche.
Mainly used in the production of PU in solution for coating and coagulation. Very good physical and mechanical properties.
Principalmente usati per la produzione di PUin soluzione per spalmatura. Sono caratterizzateda eccellenti proprietà elastomeriche unitea caratteristiche generali medie.
Mainly used in the production of PU in solutionfor coating. Excellent elastomeric propertiesand average general features.
Usati nella produzione di PU in soluzione e granuli. Eccellenti le proprietà fisico/meccaniche ela resistenza alle flessioni anchea basse temperature.
Used in the production of PU in solution and in granules. Excellent physical and mechanical properties and flexing resistance even at low temperature.
Usati nella produzione di resine PU per spalmatura e nei processi di coagulazione.Eccellenti proprietà fisiche e meccaniche con buona resistenza all’idrolisi.
Used in the production of coating PU resins and in the processes of coagulation. Excellent physical and me-chanical properties with good hydrolysis resistance.
resine resins
ADICROL B 38
ADICROL B 55
ADICROL B 112
ADICROL AE 38
ADICROL AE 56
CodiceCode
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
1,4-BDO
1,4-BDO
1,4-BDO
1,6esandiolohexanediol
1,6esandiolohexanediol
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LineareLinear
SolidoSolid
SolidoSolid
SolidoSolid
SolidoSolid
SolidoSolid
37 - 40
54 - 58
108 - 116
36 - 40
54 - 58
≤ 0,5
≤ 0,7
≤ 0,7
≤ 0,5
≤ 0,5
2500 - 4000 (60°C)
1300 - 1500 (60°C)
300 - 500 (60°C)
1600 - 1800 (70°C)
560 - 760 (70°C)
≤ 0,1
≤ 0,1
≤ 0,05
≤ 0,1
≤ 0,1
≤ 40
≤ 60
≤ 50
≤ 100
≤ 100
Acid
i / A
nidr
idi
Acid
s / A
nhyd
rides
Glic
oli p
rinci
pali
Mai
n gl
ycol
s
Stru
ttura
Stru
ctur
e
Aspe
ttoAp
pear
ance
Num
ero
di o
ssid
rile
OH n
umbe
r
Num
ero
d’ac
ido
Acid
num
ber
Visc
osità
Bro
okfie
ld
(tem
pera
tura
)Br
ookfi
eld
visc
osity
(te
mpe
ratu
re)
Cont
enut
o di
acq
uaW
ater
con
tent
Colo
re H
azen
Haze
n co
lour
mg KOH/g mg KOH/g mPa·s %Campi di impiegoField of use
ADESIVI POLIuRETANICI PER CALZATuRE pOLyURETHANE ADHESIVES FOR FOOTWEAR
Le informazioni contenute in questo foglio informativo sono basate su dati di laboratorio e sulla nostra esperienza. Riteniamo che queste informazioni siano attendibili, ma non pos-siamo garantire la loro applicabilità nel vostro processo. Non ci assumiamo alcuna responsabilità per eventi che possano verificarsi per usi impropri del prodotto stesso. L’utilizzatore, accettando i prodotti in essa descritti, accetta la responsabilità di testare esaurientemente qualsiasi applicazione prima di iniziare la produzione. Le nostre raccomandazioni non devono essere recepite come istigazione a violare alcun brevetto o legge, codice di sicurezza o norma assicurativa.
The information contained in this datasheet is based on laboratory data and our experience. We believe this information to be reliable, however we cannot guarantee its applicability in your process. We decline all responsibility for events that may arise as a consequence of improper use of the product. By accepting the products described herein, the user accepts the responsibility to thoroughly test any application before commencing production. Our advice should not be taken as encouragement to breach any patent, law, safety code or insurance regulation.
ApplicazioneApplication
11
Buone proprietà fisico/meccaniche ebuona resistenza all’idrolisi. Sono utilizzati per la produzione di granuli e adesivi poliuretanici diluiti in solvente.
Good physical and mechanical properties. Good hydrolysis resistance. Used in the productionof granules and solvent based polyurethane adhesives.
Eccellenti proprietà fisiche/meccaniche specialmente a bassa temperatura. Alta resistenza all’idrolisi. Utilizzati per la produzione di granuli e adesivi poliuretanici in solvente.
Excellent physical and mechanical properties, especially at low temperature. High hydrolysis resistance. Used in the production of granulesand solvent based polyurethane adhesives.
ADESIVI POLIuRETANICI PER IMBALLAggIO FLESSIBILEpOLyURETHANE ADHESIVES FOR FLEXIBLE pACkAGING
ApplicazioneApplication
ADICROL AID 112
ADICROL AID 64
ADICROL EN 56
ADICROL LD 40
ADICROL LD 280
CodiceCode
Aromatico /Alifatico
Aromatic /Aliphatic
Aromatico /Alifatico
Aromatic /Aliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
DEG
DEG
1,6esandiolo,
NPGhexanediol,
NPG
DEG
DEG
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LineareLinear
LiquidoLiquid
LiquidoLiquid
LiquidoLiquid
LiquidoLiquid
LiquidoLiquid
110 - 114
62 - 66
54 - 58
38 - 42
271 - 289
≤ 0,1
≤ 0,8
≤ 1
≤ 0,8
≤ 0,8
7000 - 7800 (25°C)
5400 - 6200 (50°C)
800 - 900 (60°C)
7000 - 8000 (35°C)
280 - 380 (25°C)
≤ 0,1
≤ 0,08
≤ 0,05
≤ 0,08
≤ 0,08
≤ 150
≤ 100
≤ 100
≤ 100
≤ 100
Acid
i / A
nidr
idi
Acid
s / A
nhyd
rides
Glic
oli p
rinci
pali
Mai
n gl
ycol
s
Stru
ttura
Stru
ctur
e
Aspe
ttoAp
pear
ance
Num
ero
di o
ssid
rile
OH n
umbe
r
Num
ero
d’ac
ido
Acid
num
ber
Visc
osità
Bro
okfie
ld
(tem
pera
tura
)Br
ookfi
eld
visc
osity
(te
mpe
ratu
re)
Cont
enut
o di
acq
uaW
ater
con
tent
Colo
re H
azen
Haze
n co
lour
mg KOH/g mg KOH/g mPa·s %Campi di impiegoField of use
Caratterizzati da buona flessibilitàad un largo range di temperature.Usati per adesivi mono e bi-componentisolitamente in soluzione di acetato di etile.
Good flexibility in a wide temperature range. Used for one- and two-component adhesives,usually in ethyl acetate solution.
Eccellente resistenza all’idrolisi conbuona flessibilità ad un largo range di temperatura. Usato per adesivi mono e bi-componenti, normalmente in soluzione di acetato di etile.
Excellent hydrolysis resistance and good flexibility in a wide temperature range. Used for one- and two-com-ponent adhesives, usually in ethyl acetate solution.
Caratterizzati da buona flessibilità ad un ampio range di temperature. Usati per adesivi mono ebi-componenti in solvente o in soluzione acquosa.
Good flexibility in a wide temperature range.Used for one- and two-component adhesives,both solvent- or water-based.
Usati nei polioli per la produzione di sandalicaratterizzati da basse densità di stampaggio. Essendo leggermente ramificati favorisconola riduzione dei tempi di estrazione.
Used in polyols for the production of sandalswith low moulding density. Being slightly branched,extraction time is reduced.
resine resins
ADICROL R 46
ADICROL R 56
ADICROL R 60
ADICROL L 37
ADICROL L 56
ADICROL BM 57
ADICROL A 38
ADICROL A 58
ADICROL A 62
CodiceCode
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
AlifaticoAliphatic
DicarbossilicoDicarboxylic
DicarbossilicoDicarboxylic
DicarbossilicoDicarboxylic
MEG, DEG
MEG, DEG
DEG
MEG, DEG
MEG, DEG
1,4-BDO,MEG
MEG, DEG
MEG
MEG
RamificatoBranched
RamificatoBranched
RamificatoBranched
LineareLinear
LineareLinear
LineareLinear
RamificatoBranched
RamificatoBranched
RamificatoBranched
LiquidoLiquid
LiquidoLiquid
LiquidoLiquid
SolidoSolid
SolidoSolid
SolidoSolid
LiquidoLiquid
LiquidoLiquid
LiquidoLiquid
44 - 48
54 - 58
59 - 63
35 - 39
54 - 58
54 - 58
36 - 40
55 - 61
60 - 64
≤ 0,5
≤ 1
≤ 1,7
≤ 0,5
≤ 1
≤ 0,5
≤ 1
≤ 0,8
≤ 1
1400 - 1600 (60°C)
4000 - 5000 (35°C)
9500 - 10500 (35°C)
9000 - 10500(35°C)
4100 - 5000 (35°C)
4500 - 4750 (35°C)
5000 - 6000 (50°C)
800 - 1100 (75°C)
9000 - 11000 (35°C)
≤ 0,1
≤ 0,1
≤ 0,1
≤ 0,1
≤ 0,1
≤ 0,1
≤ 0,1
≤ 0,03
≤ 0,1
≤ 150
≤ 150
≤ 150
≤ 150
≤ 150
≤ 150
≤ 18 (Gardner)
≤ 18 (Gardner)
≤ 18 (Gardner)
Acid
i / A
nidr
idi
Acid
s / A
nhyd
rides
Glic
oli p
rinci
pali
Mai
n gl
ycol
s
Stru
ttura
Stru
ctur
e
Aspe
ttoAp
pear
ance
Num
ero
di o
ssid
rile
OH n
umbe
r
Num
ero
d’ac
ido
Acid
num
ber
Visc
osità
Bro
okfie
ld
(tem
pera
tura
)Br
ookfi
eld
visc
osity
(te
mpe
ratu
re)
Cont
enut
o di
acq
uaW
ater
con
tent
Colo
re H
azen
Haze
n co
lour
mg KOH/g mg KOH/g mPa·s %Campi di impiegoField of use
SISTEMI POLIuRETANICI PER CALZATuRE pOLyURETHANE SySTEMS FOR FOOTWEAR
Le informazioni contenute in questo foglio informativo sono basate su dati di laboratorio e sulla nostra esperienza. Riteniamo che queste informazioni siano attendibili, ma non pos-siamo garantire la loro applicabilità nel vostro processo. Non ci assumiamo alcuna responsabilità per eventi che possano verificarsi per usi impropri del prodotto stesso. L’utilizzatore, accettando i prodotti in essa descritti, accetta la responsabilità di testare esaurientemente qualsiasi applicazione prima di iniziare la produzione. Le nostre raccomandazioni non devono essere recepite come istigazione a violare alcun brevetto o legge, codice di sicurezza o norma assicurativa.
The information contained in this datasheet is based on laboratory data and our experience. We believe this information to be reliable, however we cannot guarantee its applicability in your process. We decline all responsibility for events that may arise as a consequence of improper use of the product. By accepting the products described herein, the user accepts the responsibility to thoroughly test any application before commencing production. Our advice should not be taken as encouragement to breach any patent, law, safety code or insurance regulation.
ApplicazioneApplication
12
Usati principalmente nei prepolimeri e polioliper la produzione di suole per donna e uomocon buone performance in climi temperati.
Mainly used for prepolymers and polyolsfor the production of women’s and men’s shoe soles with good performance in temperate climates.
E’ normalmente usato in miscelacon Adicrol R 56 per migliorare la resistenzaalla flessione ed all’idrolisi.
Mainly used in blend with Adicrol R 56 to improve flexing and hydrolysis resistance.
Può essere usato per la produzione di prepolimeri e polioli. Buona resistenza alle flessioni e buone proprietà fisiche. Usato per calzature da uomo e donna in climi temperati.
Can be used for the production of prepolymersand polyols. Good flexing resistance and physical properties. Used in the production of men’sand women’s footwear in temperate climates.
Può essere utilizzato per la produzione di prepolimeri e polioli. L’1,4-butandiolo migliora la flessibilità e la resistenza a basse temperature e conferisce eccellenti proprietà fisico/meccaniche.
Can be used for the production of prepolymers and polyols. 1,4-butanediol improves flexibility and resistance at low temperatures, also giving excellent physical and mechanical properties.
SISTEMA DI QUALITÀ CERTIFICATOCERTIFIED QUALITY SYSTEM
1313
Un’efficiente evasione degli ordini, non deve essere solo “veloce”: deve essere soprattutto puntuale, rispettan-do i termini concordati con il cliente.
NORD COMPOSITES ITALIA, grazie ad una corretta gestione delle scorte e ad un servizio di trasporto in esclusiva, è in grado di consegnare tempestivamente i prodotti “standard” in qualsiasi parte d’Italia e all’estero.
NORD COMPOSITES ITALIA è un’azienda con Sistema di Qualità Certificato Certiquality secondo norma UNI EN ISO 9001:2008.
Puntualità
di Consegna
sistema di Qualità
CertifiCato
Effective order turnaround does not merely mean being “fast”, it also means being punctual and observing the deadlines agreed upon with cus-tomers.
NORD COMPOSITES ITALIA effi-cient stock management process and exclusive transport service is able to deliver “standard” products through-out Italy and abroad promptly.
NORD COMPOSITES ITALIA boasts a quality ManagementSystem in compliance with the UNI EN ISO 9001:2008 standard.
aCCuraCy
of delivery
Certified Quality
system
14
15
SEDE AMMINISTRATIVASTABILIMENTO DI PRODUZIONE E LABORATORI R&D (Monfalcone - Gorizia)
In aereoGli scali più vicini sono gli aereoporti di:
- Ronchi dei Legionari Trieste- Marco Polo Venezia
In autoDall’autostrada A4 Milano-Venezia-
Trieste, prendere l’uscita Monfalcone est SS14/SS55r (0,6 km), svoltare leggermen-te a destra indicazioni SS14 Monfalcone, proseguire per via Locavaz, svoltare a si-nistra in via Terza Armata, alla rotonda pri-ma uscita e rimanere in via Terza Armata, svoltare a sinistra in via Timavo, proseguire per 1 km.
COME RAGGIUNGERCI
HEA OFFICEPRODUCTION PLANTAND R&D LABORATORIES(Monfalcone - Gorizia)
By planeThe nearest airports are the following:- Ronchi dei Legionari Trieste- Marco Polo Venezia
By carFrom A4 Milano-Venice HIGHWAY, exit
Monfalcone East SS14/SS55r (0,6 km), turn to the right, SS147 Monfalcone, go on to for via Locavaz, turn to the left via Terza Armata, at the round 1st exit and stay along via Terza Armata, turn to the left via Timavo and go on to for 1 km.
HOW TO REACH US
Monfalcone(Gorizia)
SS55
MonfalconeEst
E70
A4
A4
Via Locavaz
Via Terza Armata
Via Timavo