Norriseal S 2200 2220 C497 V...Body ASTM A216 Gr. WCC ASTMA351 Gr. CF8M ASTM A352 Gr. LCC Bonnet ASTMA696/C 316 SST Hammer Nut ASTMA105 ASTMA350 Gr. LF2 316 SST Stem Nitronic 50 Packing

Contents

2 Body Styles2 Valve Dimensions3 Specifications4 Valve Trim6 Actuators7 Model Code

Norriseal Series2200 and 2220Control Valves

Space-Saving Solution:Yokeless design fits tight separator and scrubber applications

Norriseal Series 2200 and 2220 control valves have

been the standard for controlling fluids in the oil and

gas industry since1966.Thehammer nut entry into

the valve body allows quick access for trim

inspection. Both Series 2200 and 2220 valves can be

furnished with a variety of trims and end connections

(see table 7 on page 4 and table 5 on page3).

The Series 2200 has an open yoke which allows

for the mounting of positioners, limit switches and

other devices. It is also used in applications that

require an exposed stem for accurate travel

indication. The yoke allows the valve to be used for

higher temperature ranges.

The Series 2220 is the close-coupled or yokeless,

space saving version of the Series 2200. This series

is ideal for controlling liquids on compressor

scrubbers and housed production separators where

space is

at a premium.

Features

� Patented spherical plug andmatching seat gives precisionseating alignment

� Two types of throttling trim forprecision control: modified per-centage and equal percentage

� Hammer nut has extra threadengagement on the valve bodyto release any pressure withinthe body and allow safe removalof the bonnet/actuator duringdisassembly

� Integral flange is provided on the bonnet to secure thehammer nut/bonnet to the valvebody, improving safety whenused in a corrosive atmosphere

� Carbide, Stellite and soft seatsare available for corrosion andhigh/low temperatures; othermaterials are available for NACEapplications

Series2200

Series2220

Contact Norriseal-WellMark today for more information about products and services

HOUSTON: 713.466.3552 • MIDLAND: 432.238.3919 • OKLAHOMA CITY: 405.672.6660 • BROUSSARD: 337.837.3223 • KENEDY: [email protected] • NORRISEALWELLMARK.COM

Due to the continuous improvement program at Norriseal-WellMark, specifications and/or prices are subject to change without notice or obligation. For the most up to date information, please contact us directly

NORRISEAL1

"F"

"F"/2

"G"

"F"/2

.75

NORRISEAL1

NORRISEAL1

"F"/2

"F"/2

"F""F"/2

3.88

"G" "G"

2NORRISEAL

2NORRISEAL

2NORRISEAL

"F"/2

"F"/2"F""F"

"F"/2"F"/2

"G""G" "G"

1.69

Body Size

Face to Face “F”

“G”Connection

Type

ANSI Rating

150 300 600 900/1500 2500

inches mm inches mm inches mm inches mm inches mm inches mm inches mm

1.00 25NPT** 6.25 159 6.25 159

4.88 124

RF 7.25 184 7.75 197 8.25 210 9.38 238 11.38 289

RTJ 7.75 197 8.25 210 8.25 210 9.38 238 11.38 289

2.00 50NPT** 7.50 191 7.50 191

RF 10.00 254 10.50 267 11.25 286 12.88 327 16.25 413

RTJ 10.50 267 11.13 283 11.38 289 13.00 330 16.48 418

1.00-inch T-body plug forangle flow with quickopening carbide trim.

body Styles and dimensions

body Styles

Globe, “T” Styles and Angle BodiesThe 1.00-inch comes in two styles: globe andT-body, allowing fluid to flow straight through thebody in a globe pattern or angle flow pattern byrepositioning the pipe plug (which comes in thebottom port) and replacing it in the upper port.Norriseal popularized the T-body in 1950 and itstill is the most popular style in the industry.

The 2.00-inch body comes in two styles, globe and angle.

Table 1: ValVe dimenSionS

* Angle 2.00“ screwed body not shown. “F” dimension = “F”/2.

** Standard NPT body is rated to ANSI 1500.

1.00“ Globe Body 1.00“ “T” Body(configured for angle flow)

2.00“ Globe Body 2.00“ Angle Body2.00“ NPT Connection

2.00-inch angle bodywith equal percentage

17-4 PH SST trim.

1.00“ NPT Connection

2.00“ NPT Connection 2..00“ Globe Body 2..00“ Angle Body




Valve Component Options

Body ASTM A216 Gr. WCCASTM A351 Gr. CF8M

ASTM A352 Gr. LCC

Bonnet ASTM A696/C 316 SST

Hammer Nut ASTM A105ASTM A350 Gr. LF2

316 SST

Stem Nitronic 50

Packing TFE V RingViton/TFE

Fabric V Ring

Packing Spring 316 SST Inconel X750

Packing Washer CSTL 17- 4 PH

Packing Retainer 17- 4 PH

O-Ring Wetted Nitrile Aflas

VitonHSN

Diaphragm Buna/Nylon Neoprene/Nylon

O-Ring Non Wetted Viton HSN

Actuator Spring Steel

Adjust. Screw CSTL/PLtd. 316 SST

Diaphragm Housing CSTL

Diaphragm Plate CSTL

Travel Indicator 303 SST

Actuator Pressure Connection Size – 1/4” – 18 NPT Thread

Body Size Pressure RatingNPT

ASME Flanged RF and RTJBody Style

Inches mm psig bar 150/300 600 900/1500 2500

1.00 25 3750 259 X X X X Globe/”T”

1.00 25 6250 431 X X ”T”

2.00 50 3750 259 X X X X Globe/Angle

2.00** 50 6000 414 X X Globe/Angle

2200/2220 Std. WCC Mtl. -20 to 180°F (-29 to 82°C)2200/2220 Std. LCC Mtl. -40 to 180°F (-40 to 82°C)

2200 Opt. Mtl. -50 to 400°F (-45 to 204°C)2200 Opt. Mtl. -50 to 300°F (-45 to 149°C)

Specifications

Table 2: maTerialS oF ConSTruCTion

Table 3: operaTing TemperaTure*

* Optional seal material built valves can cover high or low temperature ranges, but not necessarily both.

* Pressure ratings are based on temperatures of -20 to 100° F (-29 to 38° C) with standard material.Consult factory for pressure ratings for temperatures other than those shown.(X) indicates end connections available.

Table 4: aCTuaTor

Table 5: body end ConneCTionS and preSSure raTingS*

ActuatorNumber

Maximum W. P. Size/Eff. Area Travelpsig bar sq. ins. cm. sq. ins. mm

9 55 3.8 35 226 0.625 15.912 55 3.8 70 452 0.625 15.9

** 2” 2500# is not available in CF8M




Body Size Trim SizeFlow Coefficient (CV) Globe Body

Valve Opening – Percent of Total TravelQuick^

Opening

Modified Percentage (Flow Up) (Flow Down)

Inches mm Inches mm 10 20 30 40 50 60 70 80 90 100 100

1.00 25

0.25 6.4 .284 .506 .657 .767 .875 .989 1.10 1.20 1.32 1.43 1.68

0.38 9.5 .311 .621 .942 1.28 1.64 2.07 2.51 2.93 3.35 3.70 3.82

0.50 12.7 .557 1.11 1.68 2.26 2.92 3.62 4.30 4.98 5.43 5.60 5.60

0.75 19.1 .752 1.57 2.43 3.42 4.58 6.08 7.93 9.71 10.6 11.0 11.6

1.00 25.4 .983 2.01 3.40 6.12 8.90 11.7 13.5 14.4 15.1 15.4 15.4

2.00 50

0.25 6.4 .284 .506 .657 .767 .875 .989 1.10 1.20 1.32 1.43 1.680.38 9.5 .311 .621 .942 1.28 1.64 2.07 2.51 2.93 3.35 3.70 3.75

0.50 12.7 .592 1.17 1.76 2.34 2.95 3.70 4.57 5.50 5.95 6.08 6.08

0.75 19.1 .882 1.76 2.76 3.82 5.05 6.57 8.49 10.8 12.2 12.9 13.0

1.00 25.4 1.01 2.02 3.58 6.45 9.38 12.32 13.7 15.4 16.7 17.1 23.0

1.25 31.8 Consult Factory

Standard Optional

17- 4 SST

316 SSTCarbideAlloy 6

UHMW3/4” and 1”only

Size QuickOpening

ModifiedPercentage

EqualPercentageInches mm

0.19 4.7 X0.25 6.4 X X X0.38 9.4 X X X0.50 12.7 X X X0.75 19.1 X X X1.00 25.4 X X1.25 31.75 X

Valve Trim

Table 6: 2200/2220 globe & angle body, modiFied perCenTage, equal perCenTage & quiCk opening, unbalanCed, plug ConTrol TrimS

Table 7: plug TypeS and SizeS Table 8: plug maTerial

* Consult factory for equal percentage and micro-groove trim values; Angle body

Note: (X) indicates sizes available

Fig. 9. 1.00” Series 2220 valve

Quick opening trim, flow up.

Fig. 10. 1.00” Series 2200valve with a no. 9 direct(spring opening) actuator.Throttle trim, flow up.

Throttle trim, flow up.

HAMMER NUT

.375”

INTEGRAL BONNET FLANGE

BONNET

O-RING

VALVE BODY

Fig. 11. Hammer Nut/BonnetBody EngagementOO

CC

OO

CC

OPENOPEN

Contact Norriseal-WellMark today for more information about products and servicesContact Norriseal-WellMark today for more information about products and services



Valve Trim (continued)

Table 9: maximum diFFerenTial preSSure (3-15 pSi )

Table 10: maximum diFFerenTial preSSure (6-30 pSi )

Trim Size Actuator Size

Gas SupplyPressure

Flow Under Seat Flow Over SeatThrottle Quick Opening

Direct Reverse Direct ReverseInches mm Number psig bar psig bar psig bar psig bar psig bar

.25 6.49

20 1.4 2610 180 4750 327 6250 431 6250 43130 2.0 6250 431 6250 431 6250 431 6250 431

1220 1.4 6250 431 6250 431 6250 431 6250 43130 2.0 6250 431 6250 431 6250 431 6250 431

.38 9.59

20 1.4 1050 72 1975 136 6250 431 6250 43130 2.0 4220 291 5150 355 6250 431 6250 431

1220 1.4 3695 255 5550 383 6250 431 6250 43130 2.0 6250 431 6250 431 6250 431 6250 431

.50 12.79

20 1.4 530 36 1050 672 6250 431 6250 43130 2.0 2315 160 2850 197 6250 431 6250 431

1220 1.4 2015 139 3060 211 6250 431 6250 43130 2.0 5580 385 6250 431 6250 431 6250 431

.75 19.19

20 1.4 180 12 420 29 2400 166 1700 11730 2.0 975 67 1210 83 3460 239 1700 117

1220 1.4 840 58 1315 91 4520 312 2975 20530 2.0 2415 167 2900 200 6250 431 5090 351

1.00 25.49

20 1.4 70 5 205 14 1215 84 780 5430 2.0 515 35 650 45 1730 119 780 54

1220 1.4 440 30 710 49 2255 155 175 1230 2.0 1330 92 1600 110 3290 227 2330 161

Trim Size Actuator Size

Gas SupplyPressure

Flow Under Seat Flow Over SeatThrottle Quick Opening

Direct Reverse Direct ReverseInches mm Number psig bar psig bar psig bar psig bar psig bar

.25 6.49

33 2.36250 431 6250 431

12 6250 431 6250 431 6250 431 6250 431

.38 9.59

33 2.33300 228 6250 431

12 3955 273 5855 404 6250 431 6250 431

.50 12.79

33 2.31804 124 6250 431

12 2165 149 3200 221 6250 431 6250 431

.75 19.19

33 2.3751 52 3165 218

12 905 62 1380 95 6250 431 285 20

1.0 25.49

33 2.3393 27 1525 105

12 480 33 745 51 3600 248 175 12




OPEN

"A" DIA

VENT

"B"

OPEN VENT

"A" DIA

"B"

"A" DIA

VENT

"B"

VENT

"A" DIA

2.00 MAX

"B"

Table 11: Spring deSCripTion

Table 12: ShuToFF ClaSSiFiCaTion

actuators

Fig. 12Reverse Actuator

Series 2200

Fig. 13 Direct Actuator

Series 2200

ActuatorNumber Spring Rate Range Table No.

9AA 3 – 11 psi 9HA 6 – 30 psi 10

12HA 3 – 15 psi 9WM 6 – 30 psi 10

Metal SeatsANSI Class IV (ANSI/FCI 70-2-1998)

Leakage less than 0.01% of maximum valve capacity

Soft SeatsANSI Class VI (ANSI/FCI 70-2-1998)

Leakage less than one bubble per minute. (3/4” and 1” only)

Table 13: aCTuaTor dimenSionS

Body Size ActuatorNumber

Spring Description

A BDirect*

Spring CoverActuatorDiameter

Reverse Direct2200 2220 2200 2220

Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm

1.00 259

AA9.5 241

15.38 391 9.75 248 15.88 403 10.25 260 5.50 1402.00 50 HA 17.13 435 11.50 292 17.38 441 11.75 298 7.00 1781.00 25

12HA

12.5 31816.50 419 10.88 276 17.38 441 11.75 298 7.00 178

2.00 50 WM 20.25 514 14.62 371 20.50 521 14.38 365 10.00 254

*Clearance required for “Direct Actuator” cover removal.

Fig. 14 Reverse Actuator

Series 2220

Fig. 15 Direct Actuator

Series 2220




10-2220S-36TGA-9AA 0.38AQCARB

Body/Bonnet Material CodeWCC/A696 –WCC/A696 N(1)

LCC/A350 LF2 P(1)

LCC/A350 LF2 QCF8M/316 S(1)

Code Actuator NumberAA,H A 9

HA, WM 12

Code Number“00” None

9 912 12EO Electric

Positioners (Electro-Pneumatic, Pneumatic and Digital), Airlock,Limit Switches, Solenoid Valve, Booster Relay, Filter Regulators, I/PTransducers, Pressure Controllers, Temperature Controllers, etc.

Size (Inches) Code1 102 20

2.06 212.56 26

Series CodeOpen Yoke 2200

Close Coupled 2220

Type CodeFlanged Raised Face RF

Flanged Ring Type Joint RJThreaded – NPT Female S

API Conn (RTJ) AJNone (No Valve Body) 00

(1) Suitable for NACE (2) 2” only(3) 1” only (4) Sold in Canada on ly

Note: 1”Series 2200/2220

is limited to 1.00” maximum trim size.

Note:• Tungsten-carbide and soft-seated trims are availableONLY with angular seating geometr y.

• For Equal % trim use code “AE” for 3/16” & code “BE”for ¼”, 3/8”, ½” and ¾” sizes.

.”1 dna ”¾sezis mirt ot detimil si ,WMHU ,mirt tfoS :etoN

Diaphragm Wetted CodeBuna Buna ABuna Low Temp. Buna MBuna Viton V

Neoprene HSN 7(4)

Code Nominal Size0.19 3/16”0.25 1/4”0.38 3/8”0.50 1/2” 0.62 5/8” 0.75 3/4”1.00 1” 1.25 1-1/4”

Code1 Trim Characteristic

Seating Geometry Trim

AE Angular Equal %(0.19 only)

Steel or Stellite

AP Angular Modified % CarbideAQ Angular Quick OpenBE Spherical Equal %

Steel or StelliteBP Spherical Modified %

BQ Spherical Quick Open

Code Plug or ButtMaterial

Plug InsertMaterial

Seat or Seat/Cage Material

Seat InsertMaterial

Temp. (°F)

17-4 17-4 SST – 17-4 SST – -100 to+4 00316 316 SST – 316 SST – -100 to+4 00

ST L6 STL6/316 – STL6/316 – -100 to+4 00CARB 316 SST Carbide 316 SST Carbide -50 to+4 00UHMW 316 SST Polyethylene 316 SST – -20 to+180

Code Material Temp.

– (1) PTFE V-Ring -120°+400°F- 84°+ 204°C

C Fabric V-Ring -20°+250°F- 28°+121°C

N(1) PTFE V-Ring -120°+400°F- 84°+204°C

L(1) Viton/PTFE -15°+400°F- 26°+ 204°C

Positioners (Electro-Pneumatic, Pneumatic and Digital), Airlock, Limit Switches, Solenoid Valve, Booster Relay, Filter Regulators, I/P Transducers, Pressure Controllers, Temperature Controllers, etc.(1) Suitable for NACE (2) 2” only (3) 1” only (4) Sold in Canada only




Model CodeModel CodeBODY END CONNECTIONS TRIM MATERIAL

BODY SIZE

VALVE SERIES

TRIM GEOMETRY & CHARACTERISTIC

TRIM ORIFICE SIZE

ACTUATOR SPRINGS

ACTUATOR SIZE

PACKING

Accessories:

SPECIAL COMP0NENTS

ANSI Class Code150 02300 07600 14900 21

1500 365000 502500 60

BODY RATING

Type CodePneumatic Reverse Acting (Fail Closed)

Pneumatic Direct Acting (Fail Open)Manual Handwheel

Verto Valve

FBT

Electric (Fail in Last Position) EV

ACTUATOR ACTION

Type CodeAngle A(2)

Globe G“T” T(3)

BODY STYLE

SEAL MATERIAL

� In-house engineering and technical support

� In-depth applications experience

� Award-winning innovation and ongoing

product development

� ISO 9001 certified manufacturing

� Over five decades of industry service

� Compliance with all industry standards

and specifications

� Responsive service and prompt delivery

� Field support available worldwide

Please contact your Norriseal-WellMark representative for more details and assistance in specifying the optimal solution for your application.

Why you can depend on genuine Norriseal-WellMark products

Tel: (780) 434-8566

Fax: (780) 434-4267

www.albertaoiltool.com

In Canada contact:




Documents

Norriseal S 2200 2220 C497 V...Body ASTM A216 Gr. WCC ASTMA351 Gr. CF8M ASTM A352 Gr. LCC Bonnet ASTMA696/C 316 SST Hammer Nut ASTMA105 ASTMA350 Gr. LF2 316 SST Stem Nitronic 50 Packing