Norse Building Products: RockStep Catalog

TM

WHY ROCKSTEP?• SIMPLE, QUICK INSTALLATIONS

• BEAUTIFUL & DURABLE STONE LOOK

• NO HEAVY EQUIPMENT REQUIRED

• WIDE CHOICE OF SIZES, COLORS

• CONSISTENT 6 INCH RISE (HEIGHT)

• CONSISTENT LEVEL, FLAT SURFACES

• MINIMAL YARD DISTURBANCE

• NO MATERIAL WASTE

• THE LOOK & FEEL OF NATURAL STONE WITHOUT THE EXTRA LABOR COST AND HASSLE

W W W. R O C K S T E P S . C O M

NATURAL STONE BEAUTYRockSteps are sculpted from natural stone, which creates a very realistic look for your landscaping design project. The natural appearance mirrors the texture, depth and color found in real stone.

W W W. R O C K S T E P S . C O M 1

“We are very happy with RockSteps. The stones look so natural and the various stone face configurations makes the end job look incredibly real. With the variety of shapes and sizes we are able to create stunning landscaped stairways. RockSteps are much lighter than real stones, which made installation easy. Considering the reasonable price and ease of installation this is really a great option for our customers, we will be recommending RockSteps on all of our future jobs.”

- Kent Eppley, President ERI Building and Design LLC

The look of natural stonewithout the cost and hassle

W W W. R O C K S T E P S . C O M2

Tan Random Broken Face

Tan Random Weatheredge Face

EASILY INSTALLEDInstallations are simple since you can handle and place RockSteps without heavy equipment. A primary base is required, which consists of 6” of crushed rock. RockSteps require no straps or lift trucks leading to less labor costs.


A COST EFFECTIVE SOLUTION• LESS LABOR AND ENERGY TO INSTALL

• WEIGHS 75% LESS THAN NATURAL STONE OR CONCRETE STEPS, SAVING COST ON FREIGHT

• NO HEAVY MACHINERY NEEDED

• MINIMAL TO NO YARD REPAIR

• UNIFORM SIZES FOR NO WASTE

• MADE OF PROVEN MATERIAL FOR EXCEPTIONAL DURABILITY


LIGHTWEIGHT & DURABLEEasy handling. Although the weight varies by size, RockSteps are easily handled - normally with 2 people. This includes loading, unloading, transporting, positioning and setting the RockStep stones in place. RockSteps require no straps or lift machines, leading to less labor.


The beauty of natural stone with consistent heights and level foot placement surface


Grey Random Broken Face

CONSISTENTRockSteps offer a consistent 6 inch height. This uniformity provides a safer walking surface with level, flat landing areas. RockSteps provide natural, attractive rock faces, corners and sides.

The consistent surface of RockSteps is perfect for little bare feet coming up from the lake. Unlike real stone, there are no inconsistencies, misplaced cracks or sharp extrusions.


Tan Weatheredge Step

THE PERFECT SOLUTION FOR:• LAKE FRONTS

• EXTREME STEEP HILLS

• ROOF TOP GARDENS

• TRAIL BUILDERS

• STRICT RISE & TRIP CODES

• NO ROOM FOR HEAVY EQUIPMENT

• YARD DAMAGE ISSUES




SMARTThe smart alternative to natural stone steps.Weathered edge or broken face detailing gives each step the beautiful look of natural stone.

Though exceptionally durable, RockSteps are 1/4 the weight of natural stone making them light weight and easier to transport and install. In addition to saving on labor costs, RockSteps are an affordable price compared to natural stone. It just takes a few simple steps to install your RockStep landscaping project.


“The lake front project had an extreme steep hill and tight property lines where we were going to either carry in 500 pound steps or barge the steps in from the lake. RockSteps were easy to carry, easy to install and had the look of real natural stone.” - Patrick (Ziggy) Ziegeweid, Registered Landscape Architect

Trees On The Move; New Berlin, WI



Grey Weatheredge Step

The strength and durability of natural stone

W W W. R O C K S T E P S . C O M1 0

DURABILITYRockSteps offer the strength and durability of natural stone. Reinforced concrete with polymer additives for ultra strong construction RockSteps can withstand all nature has to offer in any climate. It’s all the strength and beauty of natural stone without the weight and cost.

W W W. R O C K S T E P S . C O M 1 1

Tan Mixed Random Steps with 5-Sided Outcrop Landings

W W W. R O C K S T E P S . C O M1 2

5-sided outcrop landing with Weatheredge Face


DESIGN VERSATILITYDesign the look and function you need with RockSteps. The combination of natural beauty, ease of use and lightweight handling make RockSteps ideal for any project.

They are the perfect solution for rooftop gardens, lake front slopes and hard to access locations where heavy machinery cannot be used. The consistent step shapes make it easy for designers and architects to incorporate into their design plans, as RockSteps eliminate the inconsistencies and weight of real stone.

W W W. R O C K S T E P S . C O M 1 3

Grey Weatheredge Step

PRODUCT SIZES & SPECS

1 4

Broken Face Step30” x 15” x 6” - approx. 75#

Broken face detail on 4 vertical sides10 pieces per pallet

Weatheredge Step36” x 18” x 6” - approx. 80#48” x 18” x 6” - approx. 125#

Weatheredge detail on 3 vertical sides10 pieces per pallet

Random Broken Face Step36”- 38” x 18 - 20” x 6” - approx. 125#46“ - 48” x 18”- 20” x 6” - approx. 150#

Broken face detail on 3 vertical sidesWeatheredge detail on 1 vertical side

10 pieces per pallet

Broken Face Landing30” x 30” x 6” - approx. 140#

Broken face detail on 4 vertical sides5 pieces per pallet

Weatheredge Landing48” x 30” x 6” - approx. 200#

Weatheredge detail on 3 vertical sides5 pieces per pallet

Random Broken Face Landing48” x 30” x 6” - approx. 200#

Broken face detail on 3 vertical sidesWeatheredge detail on 1 vertical side

5 pieces per pallet

Outcrop Landing5 sided landing 6” high - approx. 200#Broken face detail on 3 vertical sidesWeatheredge detail on 2 vertical side

5 pieces per pallet

COLOR OPTIONS:

1 5

Grey

Brown

Tan

Blue Slate

Charcoal

COMPOSITION & MATERIALS:Reinforced concrete surface with a solid lightweight core that is completely encapsulated. Top surface simulates a quarry top finish with a rock face appearance on front and 2 sides.

SURFACE COLOR RANGE:The base color simulates warm natural colors on a broken or weathered edge face. Natural and synthetic mineral oxide pigments are stable to atmospheric conditions; sun fast, weather resistant, alkali resistant, water insoluble, and non- bleeding.

INSTALLATION:Remove dirt as required, and install base with a 6” base of ¾” Minus Crushed rock and top off with ¼” Minus Crushed Rock or sand. Use a hand tamper or a powered plate compactor for every 3 1/2” of crushed stone used; building a compacted crushed stone base of 6 inches. Incorporate good building practices, making sure to check local building codes (as they can vary from area to area). Observe applicable job site safety precautions. For full estimating and installation instructions see Page 17, or view our Hometime video at www.rocksteps.com.

1 6

Things You’ll Need• Safety Glasses• Gloves• Level• Shovel• Wheel Barrel• Tape Measure• Landscape Adhesive• Gravel• Rake• Wood Stakes• String line

EaSY ROCkSTEp ESTimaTiNG & iNSTaLL iNSTRuCTiONSPlan your step project to determine step sizes,colors and stone styles (Weatheredge page 12, Broken Face or Random Broken Face page 10).Then calculate the number of steps & landings needed.

Before DiggingContact the underground utility location service for your area before digging. This may be done in many areas of the U.S. by calling 811, other jurisdictions may have different phone numbers or contact procedures.

1. Set up and prep Outline the area in the hill where the Rocksteps will go with spray paint. Drive a wood stake at the top and bottom of the site. The stake at the bottom of the hill must be tall enough that a string or tape measure can be strung horizontally between it and the stake at the top of the hill. If your bottom stake is too short, do this step in stages. All you want to obtain is the linear distance from the top of the hill to the bottom. If done in stages, also measure the distance from string to ground on the lower stake. Write this down because you will add these distances together.

2. measuring the ‘run’ Measure from the top landing to the bottom along the horizontal line to calculate the length of the hillside. measure the ‘rise’ Measure the distance from the string to ground. Example: Your Rockstep path has a hillside length of 28 feet and a vertical drop of 15 feet. The run would then be 28 feet and the rise would equal 15 feet. See Fig. 1 on page 15

3. Calculating Number of Steps: Convert the rise into inches; Divide the total rise by 6 inches to figure out the number of steps you need. Example: - Using the example from Step 2, convert the rise, or 15 feet, into inches (15x12= 174 inches) and divide by 6 to get the correct number of steps, in this case 29. - The tread, or landing of each step is measured by dividing the number of steps into the amount of run. In this example, convert the 28-foot run into inches (28x12= 339) and divide by 29. - Each of the 29 steps would have a tread of 11.58 inches, which can be rounded to 12 inches. Example: When using a Rockstep that is 18 inches deep your Step #2 sets 6 inches on the lip of the bottom step leaving a 12 inch step tread. See Fig. 2 on page 15

6”Step

“The heart of every project is a practical path achieved by selecting the right Rocksteps. This gives you convenient yard access - no more tromping through the mud. Turn your wasted space into a favorite hangout.”-Rich KellyNational Sales Manager-RockStep

1 7

36” 18”

6”

4. installing Mark each step on the run in your hill with spray paint. Always start the install with the bottom step. Dig out the approximate shape of the step 6 inches deep. Fill with a 6” base of ¾” Minus Crushed rock and top off with ¼” Minus Crushed Rock or sand (for drainage). Pack and tap down gravel firmly before setting your Rockstep in place. Keep in mind to import a slight incline on each step away from the house for correct drainage. After the first step is installed , measure and dig the second Rockstep and then repeat the above process for the remaining steps being installed. Use an good quality landscape adhesive (see your dealer for recommended adhesives) under each joining lip where each top and bottom step meet. This will keep the steps in place. Backfill each step with stones or dirt and sod to prevent erosion.

5. De-icing De-icing salts are corrosive to any concrete product. Do no use rock or straight salt for de-icing. Use sand if possible. See your local landscape supplier for de-icing solutions.

EXampLE uSiNG 18”x 30” x 6” STEp

Run 28’

Level Stake

Level StakeLanding

Rise 15’CaLCuLaTiNG RiSE/RuN aND NumBER OF STEpS: SEE STEPS 1-3 Page 16

6” Overlapwith 12” Step Tread

6”Step

6”Gravel/Sand base

18” step depth

Fig. 2

Fig. 1

understanding TreadRockSteps should overlap by approx. 3-6 inches.

Common Tread Examples:

15” deep step

18” deep step

30” deep landing

18” step overlaps 6”


30” landing

18” step

12” Step Tread

24” Landing Tread


15” step

9” Step Tread

Norse Building products inc.PO BOX 126536 Main StreetAllenton, WI 53002

MAINTENANCE:When necessary, use of water and/or mild granular detergents to clean surfaces is recommended. Use medium bristle brush (wire brush can cause damage to surfaces). Do not use acidic cleaners, as damage to surface will occur. Prolonged, concentrated use of high pressure washers can also cause surface damage.

LIMIT OF WARRANTY & LIABILITY:RockSteps are covered for a period of 5 years with a limited replacement warranty against defect in workmanship and materials. Norse Building Products Inc. will repair, or provide free of charge replacement materials for any RockStep product determined to be defective. Warranty does not cover any damage due to settlement of base (provided by others or settlement of adjacent areas, and does not cover contact with chemicals, paint, or airborne contaminants, staining or oxidation.

TM

Documents

Norse Building Products: RockStep Catalog