USED MOULDS FOR SALEUSED MOULDS FOR SALEUSED MOULDS FOR SALE(Not for India / Sri Lanka)(Not for India / Sri Lanka)(Not for India / Sri Lanka)

We take this opportunity to introduce ourselves as a World’s largest Manufacturers of moulded furniture. We have eight plants in India and oneeach in Srilanka-Colombo. Every year we introduce several new products of chairs as well as dinning table, trolleys, center tables, crates, etc. in our range, & wouldlike to dispose off some moulds on regular basis. We would like to include your name in our mailing list for regularly offering you our used moulds for furniture, andcrates.

You are requested to please let us know the name of the contact person with phone/fax No. and e-mail address for our records.At present we have prepared a CD for `Moulds for Sale” containing furniture's, & crates moulds. CD contains the full details of all the used molds

with products photographs, size and other technical details of the moulds. Also contains the prices of the used molds in U.S.$.Please note that the moulds offered are maintained in excellent condition as all our plants are ISO 9001 Certified by TUV Sud-Deutschland.Our moulds are all manufactured from high quality steel DIN 1.2738 (manufactured by worlds top steel manufacturers) whereas generally the most

of the other mould manufacturers make their moulds in PDS and P20 steels, which are relatively of lower quality as compared to DIN 1.2738. This special steelensures that the product does not develop flashes even over long service life. These moulds are with extensive water cooling, & fully automatic for high productivity.

If not now, even in future if you have any requirement for used moulds, you will get wide range of moulds from us. Please contact undersigned forfuture assistant.

Best regards, Awaiting for your favorable reply.

INTRODUCTIONINTRODUCTIONINTRODUCTION

We take this opportunity to introduce ourselves as a World’s largest Manufacturers of moulded furniture. We have eight plants in India and oneeach in Srilanka-Colombo. Every year we introduce several new products of chairs as well as dinning table, trolleys, center tables, crates, etc. in our range, & wouldlike to dispose off some moulds on regular basis. We would like to include your name in our mailing list for regularly offering you our used moulds for furniture, andcrates.

You are requested to please let us know the name of the contact person with phone/fax No. and e-mail address for our records.At present we have prepared a CD for `Moulds for Sale” containing furniture's, & crates moulds. CD contains the full details of all the used molds

with products photographs, size and other technical details of the moulds. Also contains the prices of the used molds in U.S.$.Please note that the moulds offered are maintained in excellent condition as all our plants are ISO 9001 Certified by TUV Sud-Deutschland.Our moulds are all manufactured from high quality steel DIN 1.2738 (manufactured by worlds top steel manufacturers) whereas generally the most

of the other mould manufacturers make their moulds in PDS and P20 steels, which are relatively of lower quality as compared to DIN 1.2738. This special steelensures that the product does not develop flashes even over long service life. These moulds are with extensive water cooling, & fully automatic for high productivity.

If not now, even in future if you have any requirement for used moulds, you will get wide range of moulds from us. Please contact undersigned forfuture assistant.

Best regards, Awaiting for your favorable reply.

INDEX FOR FURNITURE MOULDSINDEX FOR FURNITURE MOULDSINDEX FOR FURNITURE MOULDS

Sl. No. MODEL NAME / No. MODEL DESCRIPTION

1 MILLENNIUM / PRESTIGE / FLORIST MONOBLOK WITH ARM HIGH BACK CHAIR FOR ADULTS

2 CHR 2005 MONOBLOK WITH ARM LOW BACK CHAIR FOR ADULTS

3 CHR 2024 / 2025 MONOBLOK WITH ARM MEDIUM BACK CHAIR FOR ADULTS

4 CHR2032/63/65 MONOBLOK WITH ARM MEDIUM BACK CHAIR FOR ADULTS

5 CHR 2034/64 MONOBLOK WITH ARM MEDIUM BACK CHAIR FOR ADULTS

6 CHR 2049/60 MONOBLOK WITH ARM MEDIUM BACK CHAIR FOR ADULTS

7 CHR 2101/9 MONOBLOK WITH ARM MEDIUM BACK CHAIR FOR ADULTS

8 CHR 4002/3/5/28 MONOBLOK WITHOUT ARM CHAIR FOR ADULTS

9 CHR 7033 / 7034 MONOBLOK WITH ARM LOW BACK ORNAMENTAL CHAIR FOR ADULTS

10 CHR 7037/38 MONOBLOK WITH ARM MEDIUM BACK ORNAMENTAL CHAIR FOR ADULTS

11 CHR 7037/39 MONOBLOK WITH ARM MEDIUM BACK ORNAMENTAL CHAIR FOR ADULTS

12 CHR 140 SHELL CHAIR WITH ARM FOR ADULTS

13 FAMILY TABLE SQUARE DINING TABLE 4 SEATER

14 DOT COM TRAY COMPUTER TOP TRAY ASSEMBLY

15 CENTRO 02 CENTER TABLE SET

16 TL-20 / 21 ROUND TROLLEY SET

17 TL-22 T.V. TROLLEY SET

18 ALL ROUNDER ROUND COFFEE TABLE SET

19 CHR – ORCHID / GOLD / PRINCESS / REGAL / AROMA MONOBLOK WITH ARM MEDIUM BACK CHAIR FOR ADULTS

20 CHR-IMAGE / SUNFLOWER MONOBLOK WITH ARM LOW BACK CHAIR FOR ADULTS

INDEX FOR CRATES MOULDSINDEX FOR CRATES MOULDSINDEX FOR CRATES MOULDS

Sl.No. MODEL NAME / No. MODEL DESCRIPTION

1 4645183 'A' SQUARE NESTABLE / STACKABLE, 2 VERSIONS IN ONE MOULD 'CLOSED' & 'PERFORATED'.

2 4645178 'NA' SQUARE NESTABLE / STACKABLE CRATE, ONE VERSION WITH PERFORATED.

3 4737139 'A' ISI MILK POUCH CRATE

4 4737147 'A' ISI MILK POUCH CRATE

5 4737215 / 150 'NA' TUB CRATE WITH CLOSED & PERFORATED VERSIONS.

6 53300 'NB’ MULTI PURPSOE (FRUIT VEGITABLE) CRATE WITH 2 DIFFERENT 'PERFORATED' VERSIONS.

7 53300 'NC' MULTI PURPSOE (FRUIT VEGITABLE) CRATE WITH 'PERFORATED' VERSION.

8 53300 'NF' MULTI PURPSOE (FRUIT VEGITABLE) CRATE WITH 'PERFORATED' VERSION.

9 53305 'A' MULTI PURPSOE (FRUIT VEGITABLE) CRATE WITH 'CLOSED' VERSION.

10 54 X 36 'NB' MULTI PURPSOE (FRUIT VEGITABLE) CRATE WITH 'CLOSED' & 'PERFORATED' VERSIONS.10 54 X 36 'NB' MULTI PURPSOE (FRUIT VEGITABLE) CRATE WITH 'CLOSED' & 'PERFORATED' VERSIONS.

11 NDDB 'NB' NDDB MILK POUCH CRATE NESTABLE / STACKABLE

12 BC-12000 'A' HALF DEPTH HALF DISPLAY 12 BOTTLE SQUARE POCKET CRATE FOR 1000 ml COKE BOTTLES

13 BC-24 FDHD 'A' FULL DEPTH HALF DISPLAY 24 BOTTLE SQUARE POCKET CRATE FOR 300 ml BOTTLES

14 BC-24 'NA' HALF DEPTH HALF DISPLAY 24 BOTTLE SQUARE POCKET CRATE FOR 300 ml BOTTLES

15 BC-2400 ‘D' 24 BOTTLE HALF DEPTH HALF DISPLAY CRATE FOR PEPSI BOTTLES, IN 2 VERSIONS "HW" & "UL".

16 BC-2400 'NB' 24 BOTTLE HALF DEPTH HALF DISPLAY CRATE FOR PEPSI BOTTLES

17 BC-2400 'NH' 24 BOTTLE HALF DEPTH HALF DISPLAY CRATE FOR PEPSI BOTTLES

18 BC-6 'A' 6 POCKET BOTTLE CRATE WITH HANDLE

19 BC6000 'A' 6 BOTTLEFULLDEPTH CRATE FOR 1 Ltr BOTTLES

20 BC6000 ‘B' 6 BOTTLEFULLDEPTH CRATE FOR 1 Ltr BOTTLES

INDEX FOR CRATES MOULDSINDEX FOR CRATES MOULDSINDEX FOR CRATES MOULDS

Sl.No. MODEL NAME / No. MODEL DESCRIPTION

21 BC48 ‘A’ 48 BOTTLE FULL DEPTH CRATE

22 COD6000 'A' 6 "1 LTR" BOTTLE FULL DEPTH FULL DISPLAY CRATE FOR COKE BOTTLES.

23 CO12000 'A' 12 "1 LTR" BOTTLE FULL DEPTH HALF DISPLAY CRATE FOR COKE BOTTLES.

24 RC19 ‘NA’ 19” Dia ROUND PERFORATED CRATE

25 5748140 'NA' BREAD CRATE

26 CC-4535077 'A' CRATE TRAY

27 DYE TUBE 'A' DIE TUBE

28 MIDI CRATE 'A' MIDI CRATE

29 NAGIMA SN 'A' NESTABLE STACKABLE CRATE29 NAGIMA SN 'A' NESTABLE STACKABLE CRATE

30 100 CC ROOTTRAINER 'A' SINGLE CELL 24 CAVITY ROOT TRAINER

31 150 CC ROOTTRAINER 'A' SINGLE CELL 24 CAVITY ROOT TRAINER

32 150 CC ROOTTRAINER 'A' 24 CELL SINGLE CAVITY ROOT TRAINER

33 42160 'NA' 400 x 200 CRATE MOULD

34 34 x 34 'NA' 340 x 340 SQUARE CRATE MOULD

35 42138 'NA' 400 x 200 CRATE MOULD

36 LID4737 'NA' 470 x 370 CRATE LID MOULD

37 LID6545 'NA' 650 x 450 CRATE LID MOULD

38 TOOLBOX TOOL BOX, 3 SIZES, SET OF MOULDS

39 COULTRA24-NA 24 BOTTLE FULL DEPTH FULL DISPLAY CRATE FOR COKE “ULTRA” BOTTLE

40 COD24-NB 24 BOTTLE FULL DEPTH FULL DISPLAY CRATE FOR COKE BOTTLE “300 ml”

CHR MILLENNIUM / PRESTIGE / FLORISTCHR MILLENNIUM / PRESTIGE / FLORISTCHR MILLENNIUM / PRESTIGE / FLORIST

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHT40’ CONTAINER40’ CONTAINERCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 775 mm X W775 mm X W-- 1100 mm X L1100 mm X L-- 1650 mm1650 mm8.0 TONS.8.0 TONS.LL-- 550 mm X W550 mm X W-- 570 mm X H570 mm X H-- 910 mm910 mm2.6 Kgs.2.6 Kgs.2000 CHAIRS2000 CHAIRS55 Sec55 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.DIRECT SPRUEDIRECT SPRUE850T850T

THREE VERSIONS IN ONE MOULD, CHANGEABLE IN MACHINEMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

CHR 2005CHR 2005CHR 2005

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHT40’ CONTAINER40’ CONTAINERCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 865 mm X W865 mm X W-- 1145 mm X L1145 mm X L-- 1645 mm1645 mm9.3 TONS.9.3 TONS.LL-- 550 mm X W550 mm X W-- 570 mm X H570 mm X H-- 910 mm910 mm2.382.38 KgsKgs..2000 CHAIRS2000 CHAIRS50 Sec50 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.HOT RUNNER WITH DIRECT SPRUEHOT RUNNER WITH DIRECT SPRUE775T775T

SINGLE VERSION MOULD,MOULD MADE IN ITALY AND IS IN EXCELLENT WORKING CONDITION

CHR 2024 / 2025CHR 2024 / 2025CHR 2024 / 2025

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHT40’ CONTAINER40’ CONTAINERCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 785 mm X W785 mm X W-- 850 mm X L850 mm X L-- 1205 mm1205 mm6.30 TONS.6.30 TONS.LL-- 540 mm X W540 mm X W-- 560 mm X H560 mm X H-- 775 mm775 mm2.2 Kgs.2.2 Kgs.2700 CHAIRS2700 CHAIRS45 Sec45 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.DIRECT SPRUEDIRECT SPRUE650T650T

TWO VERSIONS IN ONE MOULD, CHANGEABLE IN MACHINEMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

CHR 2024 / 2025CHR 2024 / 2025CHR 2024 / 2025

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHT40’ CONTAINER40’ CONTAINERCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 785 mm X W785 mm X W-- 850 mm X L850 mm X L-- 1205 mm1205 mm6.30 TONS.6.30 TONS.LL-- 540 mm X W540 mm X W-- 560 mm X H560 mm X H-- 775 mm775 mm2.2 Kgs.2.2 Kgs.2700 CHAIRS2700 CHAIRS45 Sec45 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.DIRECT SPRUEDIRECT SPRUE650T650T

CHR 2032 / 2063 / 2065CHR 2032 / 2063 / 2065CHR 2032 / 2063 / 2065

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 870 mm X W870 mm X W-- 850 mm X L850 mm X L-- 1270 mm1270 mm7.3 TONS.7.3 TONS.LL-- 540 mm X W540 mm X W-- 535 mm X H535 mm X H-- 835 mm835 mm2.02.0 KgsKgs..37 Sec37 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.DIRECT SPRUEDIRECT SPRUE650T650T

THREE VERSIONS IN ONE MOULD, CHANGEABLE IN MACHINEMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

CHR 2034 / 2064CHR 2034 / 2064CHR 2034 / 2064

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHT40’ CONTAINER40’ CONTAINERCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 860 mm X W860 mm X W-- 850 mm X L850 mm X L-- 1250 mm1250 mm7.1 TONS. .7.1 TONS. .LL-- 540 mm X W540 mm X W-- 565 mm X H565 mm X H-- 860 mm860 mm2.1902.190 KgsKgs..3560 CHAIRS3560 CHAIRS44 Sec44 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.DIRECT SPRUEDIRECT SPRUE775T775T

TWO VERSIONS IN ONE MOULD, CHANGEABLE IN MACHINEMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHT40’ CONTAINER40’ CONTAINERCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 860 mm X W860 mm X W-- 850 mm X L850 mm X L-- 1250 mm1250 mm7.1 TONS. .7.1 TONS. .LL-- 540 mm X W540 mm X W-- 565 mm X H565 mm X H-- 860 mm860 mm2.1902.190 KgsKgs..3560 CHAIRS3560 CHAIRS44 Sec44 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.DIRECT SPRUEDIRECT SPRUE775T775T

CHR 2048 / 2049 / 2058 / 2060 / 2061 / 2062CHR 2048 / 2049 / 2058 / 2060 / 2061 / 2062CHR 2048 / 2049 / 2058 / 2060 / 2061 / 2062

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHT40’ CONTAINER40’ CONTAINERCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 820 mm X W820 mm X W-- 840 mm X L840 mm X L-- 1240 mm1240 mm7.0 TONS. .7.0 TONS. .LL-- 610 mm X W610 mm X W-- 565 mm X H565 mm X H-- 790 mm790 mm2.12.1 KgsKgs..3232 CHAIRS3232 CHAIRS36 Sec36 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.DIRECT SPRUEDIRECT SPRUE775T775T

SIX VERSIONS IN ONE MOULD, CHANGEABLE IN MACHINEMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHT40’ CONTAINER40’ CONTAINERCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 820 mm X W820 mm X W-- 840 mm X L840 mm X L-- 1240 mm1240 mm7.0 TONS. .7.0 TONS. .LL-- 610 mm X W610 mm X W-- 565 mm X H565 mm X H-- 790 mm790 mm2.12.1 KgsKgs..3232 CHAIRS3232 CHAIRS36 Sec36 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.DIRECT SPRUEDIRECT SPRUE775T775T

CHR 2101 / 2109CHR 2101 / 2109CHR 2101 / 2109

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHT40’ CONTAINER40’ CONTAINERCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 850 mm X W850 mm X W-- 825 mm X L825 mm X L-- 1250 mm1250 mm6.8 TONS. .6.8 TONS. .LL-- 620 mm X W620 mm X W-- 560 mm X H560 mm X H-- 775 mm775 mm2.2502.250 KgsKgs..3560 CHAIRS3560 CHAIRS45 Sec45 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.DIRECT SPRUEDIRECT SPRUE775T775T

TWO VERSIONS IN ONE MOULD, CHANGEABLE IN MACHINEMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHT40’ CONTAINER40’ CONTAINERCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 850 mm X W850 mm X W-- 825 mm X L825 mm X L-- 1250 mm1250 mm6.8 TONS. .6.8 TONS. .LL-- 620 mm X W620 mm X W-- 560 mm X H560 mm X H-- 775 mm775 mm2.2502.250 KgsKgs..3560 CHAIRS3560 CHAIRS45 Sec45 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.DIRECT SPRUEDIRECT SPRUE775T775T

CHR 7033 / 7034CHR 7033 / 7034CHR 7033 / 7034

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHT40’ CONTAINER40’ CONTAINERCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 785 mm X W785 mm X W-- 850 mm X L850 mm X L-- 1205 mm1205 mm6.3 TONS. .6.3 TONS. .LL-- 540 mm X W540 mm X W-- 560 mm X H560 mm X H-- 775 mm775 mm2.35 Kgs.2.35 Kgs.2700 CHAIRS2700 CHAIRS45 Sec45 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.DIRECT SPRUEDIRECT SPRUE650T650T

TWO VERSIONS IN ONE MOULD, CHANGEABLE IN MACHINEMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHT40’ CONTAINER40’ CONTAINERCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

CHR 7037 / 7038CHR 7037 / 7038CHR 7037 / 7038

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 900 mm X W900 mm X W-- 810 mm X L810 mm X L-- 1220 mm1220 mm7.0 TONS.7.0 TONS.LL-- 608 mm X W608 mm X W-- 574 mm X H574 mm X H-- 820 mm820 mm2.2 Kgs.2.2 Kgs.38 Sec38 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.DIRECT SPRUEDIRECT SPRUE775 T775 T

TWO VERSIONS IN ONE MOULD, CHANGEABLE IN MACHINEMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

CHR 140CHR 140CHR 140

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 650 mm X W650 mm X W-- 750 mm X L750 mm X L-- 850 mm850 mm4.3 TONS4.3 TONSLL-- 480 mm X W480 mm X W-- 585 mm X H585 mm X H-- 395 mm (only shell)395 mm (only shell)1.85 Kgs. (ONLY SHELL)1.85 Kgs. (ONLY SHELL)80 Sec80 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.DIRECT SPRUEDIRECT SPRUE650T650T

WITH ARM SHELL CHAIRMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

CHR 4002 / 4003 / 4005 / 4028CHR 4002 / 4003 / 4005 / 4028CHR 4002 / 4003 / 4005 / 4028

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHT40’ CONTAINER40’ CONTAINERCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 780 mm X W780 mm X W-- 755 mm X L755 mm X L-- 1290 mm1290 mm6.0 TONS. .6.0 TONS. .LL-- 510 mm X W510 mm X W-- 470 mm X H470 mm X H-- 880 mm880 mm1.9201.920 KgsKgs..4875 CHAIRS4875 CHAIRS45 Sec45 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.DIRECT SPRUEDIRECT SPRUE650T650T

THREE VERSIONS IN ONE MOULD, CHANGEABLE IN MACHINEMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

FAMILY TABLEFAMILY TABLEFAMILY TABLE

SQUARE DINING TABLE – 4 SEATERMOULDS MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZE1. TABLE TOP2. TABLE LEG3. CONNECTOR

MOULD WEIGHT1. TABLE TOP2. TABLE LEG3. CONNECTOR

ARTICLE WEIGHT1. TABLE TOP2. TABLE LEG3. CONNECTOR

CYCLE TIME1. TABLE TOP2. TABLE LEG3. CONNECTOR

No. OF CAVITY1. TABLE TOP2. TABLE LEG3. CONNECTOR

H-705mm X W-1125mm X L-1545mmH-450mm X W-550mm X L-1550mmH-510mm X W-620mm X L-940mm

11 TONS.3.0 TONS.2.4 TONS

3900 Gms420 Gms. Each.320 Gms. Each

95 sec.45 sec.35 sec.

010202

MOULD SIZE1. TABLE TOP2. TABLE LEG3. CONNECTOR

MOULD WEIGHT1. TABLE TOP2. TABLE LEG3. CONNECTOR

ARTICLE WEIGHT1. TABLE TOP2. TABLE LEG3. CONNECTOR

CYCLE TIME1. TABLE TOP2. TABLE LEG3. CONNECTOR

No. OF CAVITY1. TABLE TOP2. TABLE LEG3. CONNECTOR

H-705mm X W-1125mm X L-1545mmH-450mm X W-550mm X L-1550mmH-510mm X W-620mm X L-940mm

11 TONS.3.0 TONS.2.4 TONS

3900 Gms420 Gms. Each.320 Gms. Each

95 sec.45 sec.35 sec.

010202

L-850mm X W-850mm X H-725mm

DOT COM TRAYDOT COM TRAYDOT COM TRAY

COMPUTER TRAYMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZE1.1. TRAYTRAY2.2. FOOT / KNOBFOOT / KNOB3.3. ADJUSTERADJUSTER4.4. SPACERSPACER

MOULD WEIGHTMOULD WEIGHT1.1. TRAYTRAY2.2. FOOT / KNOBFOOT / KNOB3.3. ADJUSTERADJUSTER4.4. SPACERSPACER

CYCLE TIMECYCLE TIME1.1. TRAYTRAY2.2. FOOT / KNOBFOOT / KNOB3.3. ADJUSTERADJUSTER4.4. SPACERSPACER

HH--465 mm X W465 mm X W--700 mm X L700 mm X L--750 mm750 mmHH--293 mm X W293 mm X W--350 mm X L350 mm X L--350 mm350 mmHH--245 mm X W245 mm X W--260 mm X L260 mm X L--180 mm180 mmHH--320 mm X W320 mm X W--250 mm X L250 mm X L--250 mm250 mm

1.9 TONS.1.9 TONS.0.2 TONS.0.2 TONS.0.09 TONS.0.09 TONS.0.15 TONS..0.15 TONS..

60 Sec.60 Sec.40 Sec.40 Sec.35 Sec.35 Sec.40 Sec.40 Sec.

MOULD SIZEMOULD SIZE1.1. TRAYTRAY2.2. FOOT / KNOBFOOT / KNOB3.3. ADJUSTERADJUSTER4.4. SPACERSPACER

MOULD WEIGHTMOULD WEIGHT1.1. TRAYTRAY2.2. FOOT / KNOBFOOT / KNOB3.3. ADJUSTERADJUSTER4.4. SPACERSPACER

CYCLE TIMECYCLE TIME1.1. TRAYTRAY2.2. FOOT / KNOBFOOT / KNOB3.3. ADJUSTERADJUSTER4.4. SPACERSPACER

HH--465 mm X W465 mm X W--700 mm X L700 mm X L--750 mm750 mmHH--293 mm X W293 mm X W--350 mm X L350 mm X L--350 mm350 mmHH--245 mm X W245 mm X W--260 mm X L260 mm X L--180 mm180 mmHH--320 mm X W320 mm X W--250 mm X L250 mm X L--250 mm250 mm

1.9 TONS.1.9 TONS.0.2 TONS.0.2 TONS.0.09 TONS.0.09 TONS.0.15 TONS..0.15 TONS..

60 Sec.60 Sec.40 Sec.40 Sec.35 Sec.35 Sec.40 Sec.40 Sec.

DOT COM TRAYDOT COM TRAYDOT COM TRAY

COMPUTER TRAYMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

ARTICLE SIZEARTICLE SIZE1.1. TRAYTRAY2.2. FOOT / KNOBFOOT / KNOB3.3. ADJUSTERADJUSTER4.4. SPACERSPACER

NO OF CAVITYNO OF CAVITY1.1. TRAYTRAY2.2. FOOT / KNOBFOOT / KNOB3.3. ADJUSTERADJUSTER4.4. SPACERSPACER

•• SHIPMENTSHIPMENT•• GATE POINTGATE POINT•• MACHINE SIZEMACHINE SIZE

477mm x 448mm x 42mm477mm x 448mm x 42mmFOOTFOOT-- DAI 34 x 10mm KNOBDAI 34 x 10mm KNOB-- DAIDAI –– 15 x 6mm15 x 6mmINNERINNER-- DAI 23.5x 40mm OUTERDAI 23.5x 40mm OUTER--DAI 40 x 46.6mm.DAI 40 x 46.6mm.DAI 30 x 52mmDAI 30 x 52mm

114+4 (FOOT4+4 (FOOT ––4 & KNOB4 & KNOB –– 4 CAVITY)4 CAVITY)4+4 (INNER4+4 (INNER ––4 & OUTER4 & OUTER –– 4 CAVITY)4 CAVITY)44

IMMEDIATELY AFTER RECEIPT OF YOUR L.C.IMMEDIATELY AFTER RECEIPT OF YOUR L.C.HOT RUNNER, SIDE GATEHOT RUNNER, SIDE GATE600T, 180T, 80T600T, 180T, 80T

ARTICLE SIZEARTICLE SIZE1.1. TRAYTRAY2.2. FOOT / KNOBFOOT / KNOB3.3. ADJUSTERADJUSTER4.4. SPACERSPACER

NO OF CAVITYNO OF CAVITY1.1. TRAYTRAY2.2. FOOT / KNOBFOOT / KNOB3.3. ADJUSTERADJUSTER4.4. SPACERSPACER

•• SHIPMENTSHIPMENT•• GATE POINTGATE POINT•• MACHINE SIZEMACHINE SIZE

477mm x 448mm x 42mm477mm x 448mm x 42mmFOOTFOOT-- DAI 34 x 10mm KNOBDAI 34 x 10mm KNOB-- DAIDAI –– 15 x 6mm15 x 6mmINNERINNER-- DAI 23.5x 40mm OUTERDAI 23.5x 40mm OUTER--DAI 40 x 46.6mm.DAI 40 x 46.6mm.DAI 30 x 52mmDAI 30 x 52mm

114+4 (FOOT4+4 (FOOT ––4 & KNOB4 & KNOB –– 4 CAVITY)4 CAVITY)4+4 (INNER4+4 (INNER ––4 & OUTER4 & OUTER –– 4 CAVITY)4 CAVITY)44

IMMEDIATELY AFTER RECEIPT OF YOUR L.C.IMMEDIATELY AFTER RECEIPT OF YOUR L.C.HOT RUNNER, SIDE GATEHOT RUNNER, SIDE GATE600T, 180T, 80T600T, 180T, 80T

CENTRO 2CENTRO 2CENTRO 2

CENTER TABLE WITH WHEELMOULDS MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZE1. CENTRO-02 TOP TRAY2. LONG LEG3. FOOT LEG

MOULD WEIGHT1. CENTRO –02 TOP2. LONG LEG3. FOOT LEG

ARTICLE WEIGHT1. CENTRO –02 TOP2. LONG LEG3. FOOT LEG

CYCLE TIME1. CENTRO-02 TOP2. LONG LEG3. FOOT LEG

No. OF CAVITY1. CENTRO-05 TOP2. LONG LEG3. FOOT LEG

H-527mm X W-650mm X L-800mmH-510mm X W-510mm X L-580mmH-375mm X W-375mm X L- 370mm

2.2 TONS.1.2 TONS.400 KG.

840 gms. each100 gms. Each.20 gms. Each

40 sec.60 sec.40 sec.

010606

CENTRO 02

SIZE - 560 x 400 x 490 mm

MOULD SIZE1. CENTRO-02 TOP TRAY2. LONG LEG3. FOOT LEG

MOULD WEIGHT1. CENTRO –02 TOP2. LONG LEG3. FOOT LEG

ARTICLE WEIGHT1. CENTRO –02 TOP2. LONG LEG3. FOOT LEG

CYCLE TIME1. CENTRO-02 TOP2. LONG LEG3. FOOT LEG

No. OF CAVITY1. CENTRO-05 TOP2. LONG LEG3. FOOT LEG

H-527mm X W-650mm X L-800mmH-510mm X W-510mm X L-580mmH-375mm X W-375mm X L- 370mm

2.2 TONS.1.2 TONS.400 KG.

840 gms. each100 gms. Each.20 gms. Each

40 sec.60 sec.40 sec.

010606

CENTRO 02

SIZE - 560 x 400 x 490 mm

TLTLTL --- 20 / 2120 / 2120 / 21

ROUND TROLLEYMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITIONMOULD SIZE

1. FLAT TRAY2. DEEP TRAY3. LEG4. FEET

MOULD WEIGHT1. FLAT TRAY2. DEEP TRAY3. LEG4. FEET

ARTICLE WEIGHT1. FLAT TRAY2. DEEP TRAY3. LEG4. FEET

No. of cavity1. FLAT TRAY2. DEEP TRAY3. LEG4. FEET

CYCLE TIME1. FLAT TRAY2. DEEP TRAY3. LEG4. FEET

• SHIPMENT• MACHINE SIZE

Dia- 583mm X H-346mmDia- 583mm X H-346mmH-440mm X L-500mm X W-450mmH-300mm X L-295mm X W-250mm

0.7 Tons.0.7 Tons.0.7 Tons.0.2 Tons.

1.02 Kgs. OF TOTAL SET.

01010606

40 Sec.40 Sec .40 Sec.40 Sec.

IMMEDIATELY AFTER RECEIPT OF YOUR L. C.300T

MOULD SIZE1. FLAT TRAY2. DEEP TRAY3. LEG4. FEET

MOULD WEIGHT1. FLAT TRAY2. DEEP TRAY3. LEG4. FEET

ARTICLE WEIGHT1. FLAT TRAY2. DEEP TRAY3. LEG4. FEET

No. of cavity1. FLAT TRAY2. DEEP TRAY3. LEG4. FEET

CYCLE TIME1. FLAT TRAY2. DEEP TRAY3. LEG4. FEET

• SHIPMENT• MACHINE SIZE

Dia- 583mm X H-346mmDia- 583mm X H-346mmH-440mm X L-500mm X W-450mmH-300mm X L-295mm X W-250mm

0.7 Tons.0.7 Tons.0.7 Tons.0.2 Tons.

1.02 Kgs. OF TOTAL SET.

01010606

40 Sec.40 Sec .40 Sec.40 Sec.

IMMEDIATELY AFTER RECEIPT OF YOUR L. C.300T

TLTLTL---222222

T.V. TROLLEY WITH WHEELMOULDS MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZE1. TOP2. SIDE FRAME3. FLOWER CAP

MOULD WEIGHT1. TOP2. SIDE FRAME3. FLOWER CAP

ARTICLE WEIGHT1. TOP2. SIDE FRAME3. FLOWER CAP

CYCLE TIME1. TOP2. SIDE FRAME3. FLOWER CAP

No. OF CAVITY1. TOP2. SIDE FRAME3. FLOWER CAP

MACHINE

H- 553mm X W- 760mm X L-1350mm.H- 550mm X W- 750mm X L-1350mmH- 280mm X W- 375mm X L-340mm (16 CAVITY MOULD)

4.0 TONS.3.0 TONS.300KG.

1870 gms630 gms02gms.

77 Sec60 Sec.17 Sec.

010104800 T / 600 T / 80 T

SIZE: 780 x 525 x 490 mm

MOULD SIZE1. TOP2. SIDE FRAME3. FLOWER CAP

MOULD WEIGHT1. TOP2. SIDE FRAME3. FLOWER CAP

ARTICLE WEIGHT1. TOP2. SIDE FRAME3. FLOWER CAP

CYCLE TIME1. TOP2. SIDE FRAME3. FLOWER CAP

No. OF CAVITY1. TOP2. SIDE FRAME3. FLOWER CAP

MACHINE

H- 553mm X W- 760mm X L-1350mm.H- 550mm X W- 750mm X L-1350mmH- 280mm X W- 375mm X L-340mm (16 CAVITY MOULD)

4.0 TONS.3.0 TONS.300KG.

1870 gms630 gms02gms.

77 Sec60 Sec.17 Sec.

010104800 T / 600 T / 80 T

ALL ROUNDER TABLEALL ROUNDER TABLEALL ROUNDER TABLE

ROUND TABLEMOULDS MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZE1. TOP2. LEG

MOULD WEIGHT1. TOP2. LEG

ARTICLE WEIGHT1. TOP2. LEG

CYCLE TIME1. TOP2. LEG

No. OF CAVITY1. TOP2. LEG

SHIPMENTMACHINE SIZE

H-585 mm X W-990 mm X L-990 mmH-745 mm X W-550 mm X L-625 mm

4.5 Tons.2.0 Tons.

1490 Gms.185 Gms. each

72 Sec52 Sec

0104IMMEDIATELY AFTER RECEIPT OF YOUR L. C.600 / 1000 T

MOULD SIZE1. TOP2. LEG

MOULD WEIGHT1. TOP2. LEG

ARTICLE WEIGHT1. TOP2. LEG

CYCLE TIME1. TOP2. LEG

No. OF CAVITY1. TOP2. LEG

SHIPMENTMACHINE SIZE

H-585 mm X W-990 mm X L-990 mmH-745 mm X W-550 mm X L-625 mm

4.5 Tons.2.0 Tons.

1490 Gms.185 Gms. each

72 Sec52 Sec

0104IMMEDIATELY AFTER RECEIPT OF YOUR L. C.600 / 1000 T

ALL ROUNDER

SIZE – DIA 680 x 440 mm

CHRCHRCHR ––– ORCHID / GOLD / PRINCESS / REGAL / AROMAORCHID / GOLD / PRINCESS / REGAL / AROMAORCHID / GOLD / PRINCESS / REGAL / AROMA

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHT40’ CONTAINER40’ CONTAINERCYCLE TIMECYCLE TIMEMACHINE SIZEMACHINE SIZE

HH-- 800 mm X W800 mm X W-- 845 mm X L845 mm X L-- 1275 mm1275 mm6.8 TONS.6.8 TONS.LL-- 610 mm X W610 mm X W-- 565 mm X H565 mm X H-- 790 mm790 mm2.162.16 KgsKgs..1900 CHAIRS1900 CHAIRS45 Sec45 Sec1000T1000T

FIVE VERSIONS IN ONE MOULD, CHANGEABLE IN MACHINEMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

CHRCHRCHR ––– IMAGE / SUNFLOWERIMAGE / SUNFLOWERIMAGE / SUNFLOWER

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHT40’ CONTAINER40’ CONTAINERCYCLE TIMECYCLE TIMEMACHINE SIZEMACHINE SIZE

HH-- 830 mm X W830 mm X W-- 825 mm X L825 mm X L-- 1290 mm1290 mm6.9 TONS.6.9 TONS.LL-- 540 mm X W540 mm X W-- 575 mm X H575 mm X H-- 765 mm765 mm1.961.96 KgsKgs..2400 CHAIRS2400 CHAIRS42 Sec42 Sec1000T1000T

TWO VERSIONS IN ONE MOULD, CHANGEABLE IN MACHINEMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

464518346451834645183---A (CH / JR)A (CH / JR)A (CH / JR)

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 610 mm X W610 mm X W-- 925 mm X L925 mm X L-- 930 mm930 mm4.2 TONS.4.2 TONS.LL-- 460 mm X W460 mm X W-- 450 mm X H450 mm X H--183 mm183 mm1.4001.400 KgsKgs. (CH) & 1.130. (CH) & 1.130 KgsKgs. (JR). (JR)63 Sec63 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.6 POINT HOT RUNNER SYSTEM.6 POINT HOT RUNNER SYSTEM.650T650T

SQUARE NESTABLE / STACKABLE CRATE WITH TWO VERSIONS IN ONE MOULD, CLOSED & PERFORATED.MOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

464517846451784645178 --- NANANA

SQUARE NESTABLE / STACKABLE CRATE.MOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

HH-- 790 mm X W790 mm X W-- 775 mm X L775 mm X L-- 725 mm725 mm3.5 TONS.3.5 TONS.1150 Gms.1150 Gms.65 Sec65 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.650T650T

CH 4737139CH 4737139CH 4737139 ---AAA

PARTITION WALL MILK POUCH CRATE MOULDMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

HH-- 655 mm X W655 mm X W-- 780 mm X L780 mm X L-- 915 mm.915 mm.3.8 TONS. .3.8 TONS. .LL –– 471 x W471 x W –– 378 x H378 x H –– 139 mm139 mm15001500 GmsGms. .. .77 Sec77 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.600600--TT

CH 4737147CH 4737147CH 4737147 ---AAA

PARTITION WALL MILK POUCH CRATE MOULDMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

HH-- 560 mm X W560 mm X W-- 785 mm X L785 mm X L-- 950 mm.950 mm.2,2 TONS. .2,2 TONS. .LL –– 471 x W471 x W –– 378 x H378 x H –– 147 mm147 mm16001600 GmsGms. .. .90 Sec90 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.600600--TT

4737215 / 1504737215 / 1504737215 / 150 --- NANANA

CRATES WITH 2 HEIGHTS IN ONE MOULD, 215 mm & 150 mm.MOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

HH-- 840 mm X W840 mm X W-- 715 mm X L715 mm X L-- 515 mm515 mm2.4 TONS.2.4 TONS.215215-- 133O / 1500 Gms. & 160133O / 1500 Gms. & 160 -- 1430 / 1700 Gms.1430 / 1700 Gms.70 Sec.70 Sec.ONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.450450--TT

533005330053300 ---NBNBNB

MULTIPURPOSE (FRUIT / VEGETABLE) CRATE MOULDWITH 2 DIFFERENT PERFORATED VERSIONS .

MOULD MADE IN ITALY AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

HH-- 800 mm X W800 mm X W-- 785 mm X L785 mm X L-- 990 mm.990 mm.4.8 TONS.4.8 TONS.LL –– 540 x W540 x W –– 360 x H360 x H –– 290 mm290 mmBig serrationBig serration --1715Gms., Lower weight1715Gms., Lower weight –– 15551555 GmsGms..45 Sec45 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.650650--TT

533005330053300 ---NCNCNC

MULTIPURPOSE (FRUIT / VEGETABLE) CRATE MOULDWITH PERFORATED VERSIONS .

MOULD MADE IN ITALY AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

HH-- 740 mm X W740 mm X W-- 785 mm X L785 mm X L-- 1020 mm.1020 mm.4.6 TONS.4.6 TONS.LL –– 540 x W540 x W –– 360 x H360 x H –– 290 mm290 mm1585Gms.1585Gms.58 Sec58 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.650650--TTAlso available with CROSS RIBBED bottomAlso available with CROSS RIBBED bottom

533005330053300 ---NFNFNF

MULTIPURPOSE (FRUIT / VEGETABLE) CRATE MOULD, WITH PERFORATED VERSION.MOULD MADE IN ITALY AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

HH-- 745 mm X W745 mm X W-- 790 mm X L790 mm X L-- 1000 mm.1000 mm.4.6 TONS.4.6 TONS.LL –– 500 x W500 x W –– 300 x H300 x H –– 300 mm300 mm17001700 GmsGms..60 Sec60 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.650650--TT

533055330553305 ---AAA

MULTIPURPOSE (FRUIT / VEGETABLE) CRATE MOULD, WITH 2 VERSIONS.MOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

HH-- 640 mm X W640 mm X W-- 740 mm X L740 mm X L-- 910 mm.910 mm.3.4 TONS.3.4 TONS.LL –– 525 x W525 x W –– 360 x H360 x H –– 305 mm305 mmCCCC –– 2.500 Kg.2.500 Kg.65 Sec65 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.800800--TT

54 x 3654 x 3654 x 36 --- NBNBNB

MULTIPURPOSE (FRUIT / VEGETABLE) CRATE MOULD, WITH CLOSED & PERFORATED VERSIONS.MOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

HH-- 820 mm X W820 mm X W-- 845 mm X L845 mm X L-- 1040 mm.1040 mm.5.66 TONS.5.66 TONS.LL –– 540 x W540 x W –– 360 x H360 x H –– 305 mm305 mmCCCC –– 2.500 Kg.2.500 Kg.65 Sec65 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.800800--TT

MODEL Wt. CTJR 5436305 1800 Gms. 52 Sec.JR 5436305 1800 Gms. 52 Sec.

JR 5436305 W.C 1750 Gms. 72 Sec.

CC / CH 5436300 2025 Gms. 90 Sec.

JR 5436300 1660 Gms. 60 Sec.

NDDBNDDBNDDB ---NBNBNB

NDDB MILK POUCH NESTABLE / STACKABLE CRATE MOULD.MOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

HH-- 565 mm X W565 mm X W-- 555 mm X L555 mm X L-- 755 mm.755 mm.1.86 TONS.1.86 TONS.LL –– 570 mm x W570 mm x W –– 298 mm x H298 mm x H –– 173 mm173 mm12001200 GmsGms. .. .62 Sec62 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.650650--TT

BC 12000BC 12000BC 12000 ---AAA

12 POCKET BOTTLE CRATE MOULD FOR 1000 ML BOTTLES.MOULDS MADE IN GERMANY AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZE

ARTICLE WEIGHTARTICLE WEIGHTCAPACITYCAPACITYBOTTLES POCKET SIZEBOTTLES POCKET SIZECYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH--680mm X W680mm X W-- 750mm X L750mm X L--860mm860mm3.0 TONS. .3.0 TONS. .O.D. LO.D. L--425mmX W425mmX W--300X H300X H--150mm150mmI.D. LI.D. L--388mm X W388mm X W--290mm X H290mm X H--133mm133mm1.11.1 KgsKgs..1000 ML.1000 ML.DIADIA –– 90mm.90mm.55 Sec55 SecIMMEDIATELY AFTER RECEIPT OF YOUR L. C.IMMEDIATELY AFTER RECEIPT OF YOUR L. C.HOT RUNNER 4 POINTHOT RUNNER 4 POINT800,T800,T

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZE

ARTICLE WEIGHTARTICLE WEIGHTCAPACITYCAPACITYBOTTLES POCKET SIZEBOTTLES POCKET SIZECYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH--680mm X W680mm X W-- 750mm X L750mm X L--860mm860mm3.0 TONS. .3.0 TONS. .O.D. LO.D. L--425mmX W425mmX W--300X H300X H--150mm150mmI.D. LI.D. L--388mm X W388mm X W--290mm X H290mm X H--133mm133mm1.11.1 KgsKgs..1000 ML.1000 ML.DIADIA –– 90mm.90mm.55 Sec55 SecIMMEDIATELY AFTER RECEIPT OF YOUR L. C.IMMEDIATELY AFTER RECEIPT OF YOUR L. C.HOT RUNNER 4 POINTHOT RUNNER 4 POINT800,T800,T

BC 24 FDHDBC 24 FDHDBC 24 FDHD ---AAA

FULL DEPTH HALF DISPLAY SQUARE POCKET 300 ML BOTTLE CRATE MOULDMOULD MADE IN JAPAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

HH-- 720 mm X W720 mm X W-- 920 mm X L920 mm X L-- 1250 mm.1250 mm.6.5 TONS.6.5 TONS.15301530 GmsGms71 Sec71 SecIMMEDIATELY AFTER RECEIPT OF YOUR L. C.IMMEDIATELY AFTER RECEIPT OF YOUR L. C.800800--TT

BC 24BC 24BC 24 ---NANANA

HALF DEPTH HALF DISPLAY SQUARE POCKET 300 ML BOTTLE CRATE MOULDMOULD MADE IN GERMANY AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZE

ARTICLE WEIGHTARTICLE WEIGHTCAPACITYCAPACITYBOTTLES POCKET SIZEBOTTLES POCKET SIZECYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 525 mm X W525 mm X W-- 670 mm X L670 mm X L-- 810 mm810 mm2.2 TONS.2.2 TONS.O.D. LO.D. L--435mmX W435mmX W--295mm X H295mm X H--125mm125mmI.D. LI.D. L--412mm X W412mm X W--275mm X H275mm X H--118mm118mm925925 gmsgms..300 ML.300 ML.62.5mm X 62.5mm62.5mm X 62.5mm40 Sec40 SecIMMEDIATELY AFTER RECEIPT OF YOUR L. C.IMMEDIATELY AFTER RECEIPT OF YOUR L. C.HOT RUNNER 4 POINTHOT RUNNER 4 POINT600 T600 T

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZE

ARTICLE WEIGHTARTICLE WEIGHTCAPACITYCAPACITYBOTTLES POCKET SIZEBOTTLES POCKET SIZECYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 525 mm X W525 mm X W-- 670 mm X L670 mm X L-- 810 mm810 mm2.2 TONS.2.2 TONS.O.D. LO.D. L--435mmX W435mmX W--295mm X H295mm X H--125mm125mmI.D. LI.D. L--412mm X W412mm X W--275mm X H275mm X H--118mm118mm925925 gmsgms..300 ML.300 ML.62.5mm X 62.5mm62.5mm X 62.5mm40 Sec40 SecIMMEDIATELY AFTER RECEIPT OF YOUR L. C.IMMEDIATELY AFTER RECEIPT OF YOUR L. C.HOT RUNNER 4 POINTHOT RUNNER 4 POINT600 T600 T

BCBCBC ––– 240024002400 ---DDD

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZECYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 540 mm X W540 mm X W-- 790 mm X L790 mm X L-- 900 mm900 mm3.4 TONS.3.4 TONS.1.090 Kgs.1.090 Kgs.27 Sec.27 Sec.ONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.6 POINT HOT RUNNER SYSTEM.6 POINT HOT RUNNER SYSTEM.450T450T

24 BOTTLE CRATE FOR 300 ML BOTTLES.MOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

BC 2400

SIZE - 420 x 278 x 140 mm

Wt. 1090 Gms.

BCBCBC ––– 240024002400 ---NBNBNB

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 575 mm X W575 mm X W-- 645 mm X L645 mm X L-- 800 mm800 mm2.3 TONS.2.3 TONS.1.0801.080 KgsKgs. (HW). (HW)60 Sec60 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.6 POINT HOT RUNNER SYSTEM.6 POINT HOT RUNNER SYSTEM.400T400T

24 BOTTLES HALF DEPTH CRATE MOULD.MOULD MADE IN GERMANY AND IS IN EXCELLENT WORKING CONDITION

BCBCBC ––– 240024002400 ---NHNHNH

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 515 mm X W515 mm X W-- 650 mm X L650 mm X L-- 790 mm790 mm2.1TONS.2.1TONS.0.9800.980 KgsKgs..60 Sec60 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.6 POINT HOT RUNNER SYSTEM.6 POINT HOT RUNNER SYSTEM.400T400T

24 BOTTLES HALF DEPTH CRATE MOULD.MOULD MADE IN GERMANY AND IS IN EXCELLENT WORKING CONDITION

BC 6BC 6BC 6 ---AAA (WITH HANDLE)(WITH HANDLE)(WITH HANDLE)

6 POCKET BOTTLE CRATE MOULD + HANDLE MOULD FOR 300 ML BOTTLES.MOULDS MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZE1.1. CRATECRATE2.2. HANDLEHANDLE

MOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMEGATINGGATING

SHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

HH-- 457 mm X W457 mm X W-- 395 mm X L395 mm X L-- 450 mm450 mmHH-- 310 mm X W310 mm X W-- 295 mm X L295 mm X L-- 367 mm367 mmCRATE:CRATE: -- 0.70 TONS / HANDLE:0.70 TONS / HANDLE: -- 0.20 TONS0.20 TONSCRATE:CRATE: -- 375 Gms / HANDLE:375 Gms / HANDLE: -- 36 Gms.36 Gms.CRATE:CRATE: -- 49 Sec. / HANDLE:49 Sec. / HANDLE: -- 43 Sec.43 Sec.CRATE:CRATE: --4 POINT HOT RUNNER4 POINT HOT RUNNERHANDLE:HANDLE: -- COLD RUNNERCOLD RUNNERONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.CRATE:CRATE: -- 300300--T / HANDLE:T / HANDLE: -- 180 T180 T

MOULD SIZEMOULD SIZE1.1. CRATECRATE2.2. HANDLEHANDLE

MOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMEGATINGGATING

SHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

HH-- 457 mm X W457 mm X W-- 395 mm X L395 mm X L-- 450 mm450 mmHH-- 310 mm X W310 mm X W-- 295 mm X L295 mm X L-- 367 mm367 mmCRATE:CRATE: -- 0.70 TONS / HANDLE:0.70 TONS / HANDLE: -- 0.20 TONS0.20 TONSCRATE:CRATE: -- 375 Gms / HANDLE:375 Gms / HANDLE: -- 36 Gms.36 Gms.CRATE:CRATE: -- 49 Sec. / HANDLE:49 Sec. / HANDLE: -- 43 Sec.43 Sec.CRATE:CRATE: --4 POINT HOT RUNNER4 POINT HOT RUNNERHANDLE:HANDLE: -- COLD RUNNERCOLD RUNNERONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.CRATE:CRATE: -- 300300--T / HANDLE:T / HANDLE: -- 180 T180 T

BCBCBC ––– 600060006000 ---AAA

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 720 mm X W720 mm X W-- 670 mm X L670 mm X L-- 735 mm735 mm2.9 TONS.2.9 TONS.1.3761.376 KgsKgs..45 Sec45 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.4 POINT HOT RUNNER SYSTEM.4 POINT HOT RUNNER SYSTEM.450T450T

6 BOTTLES FULL DEPTH CRATE MOULD.MOULD MADE IN GERMANY AND IS IN EXCELLENT WORKING CONDITION

BCBCBC ––– 600060006000 ---BBB

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 810mm X W810mm X W-- 790 mm X L790 mm X L-- 890 mm890 mm5.0 TONS.5.0 TONS.1.2301.230 KgsKgs..45 Sec45 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.4 POINT HOT RUNNER SYSTEM.4 POINT HOT RUNNER SYSTEM.450T450T

6 BOTTLES FULL DEPTH CRATE MOULD.MOULD MADE IN GERMANY AND IS IN EXCELLENT WORKING CONDITION

BCBCBC ––– 484848 ---AAA

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 704 mm X W704 mm X W-- 835 mm X L835 mm X L-- 1005 mm1005 mm4.6 TONS.4.6 TONS.1.5941.594 KgsKgs..54 Sec54 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.4 POINT HOT RUNNER SYSTEM.4 POINT HOT RUNNER SYSTEM.650T650T

48 BOTTLES FULL DEPTH CRATE MOULD.MOULD MADE IN GERMANY AND IS IN EXCELLENT WORKING CONDITION

COD 6000COD 6000COD 6000 ---AAA

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 768 mm X W768 mm X W-- 760 mm X L760 mm X L-- 840 mm840 mm3.3 TONS.3.3 TONS.1.425 Kgs.1.425 Kgs.45 Sec45 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.4 POINT HOT RUNNER SYSTEM.4 POINT HOT RUNNER SYSTEM.650T650T

6 BOTTLE (1 LTR) CRATE FOR COCACOLA “FULL DEPTH FULL DISPLAY”MOULD MADE IN GERMANY AND IS IN EXCELLENT WORKING CONDITION

CO 12000CO 12000CO 12000 ---AAA

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 790 mm X W790 mm X W-- 790 mm X L790 mm X L-- 990 mm990 mm4.9 TONS.4.9 TONS.

Kgs.Kgs.SecSec

ONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.4 POINT HOT RUNNER SYSTEM.4 POINT HOT RUNNER SYSTEM.650T650T

12 BOTTLE (1 LTR) CRATE FOR COCACOLA “FULL DEPTH HALF DISPLAY”MOULD MADE IN GERMANY AND IS IN EXCELLENT WORKING CONDITION

RC 19RC 19RC 19 ---AAA

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 330 mm X330 mm X DiaDia 580 mm580 mm0.7 TONS.0.7 TONS.0.7850.785 KgsKgs..50 Sec50 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.DIRECT SPRUE SYSTEM.DIRECT SPRUE SYSTEM.400T400T

ROUND CRATE WITH PERFORATION RC 19MOULD MADE IN ITALY AND IS IN EXCELLENT WORKING CONDITION

574814057481405748140 ---NANANA

BREAD CRATE MOULD.MOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

HH-- 578 mm X W578 mm X W-- 904 mm X L904 mm X L-- 1000 mm.1000 mm.4.1 TONS.4.1 TONS.20002000 GmsGms..80 Sec80 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.650650--TT

CC 4535077CC 4535077CC 4535077 ---AAA

TRAY TYPE CRATE MOULDMOULD MADE IN EUROPE AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHTCAPACITYCAPACITYCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

LL--540 mm X W540 mm X W-- 650 mm X L650 mm X L--710 mm710 mm1.4 TONS. .1.4 TONS. .O.D. LO.D. L--450 mm X W450 mm X W--354 mm X H354 mm X H-- 77 mm77 mmI.D. LI.D. L--410 mm X W410 mm X W--300 mm X H300 mm X H-- 70 mm70 mm830830 gmsgms..8.6 LTRS.8.6 LTRS.90 Sec.90 Sec.ONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.400400--TT

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHTCAPACITYCAPACITYCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

DIE TUBEDIE TUBEDIE TUBE

DIE TUBE MOULDMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZENO. OF CAVITYNO. OF CAVITYMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZEARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENT

DIA.540mm X HDIA.540mm X H--585mm585mm111.1 TONS. .1.1 TONS. .DIA. 75mm O.D.X LDIA. 75mm O.D.X L--290mm290mm100 gms.100 gms.55sec55secIMMEDIATELY AFTER RECEIPT OF YOUR L. C.IMMEDIATELY AFTER RECEIPT OF YOUR L. C.

MIDI CRATE (CC 42160)MIDI CRATE (CC 42160)MIDI CRATE (CC 42160)

MIDI CRATE MOULDMOULD MADE IN ITALY AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE SIZEARTICLE SIZE

ARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENT

HH--410mm X W410mm X W--480 X L480 X L--410mm410mm0.65 TONS. .0.65 TONS. .O.D. LO.D. L--390mmXW390mmXW--270mmXH270mmXH--160mm160mmI.D. LI.D. L--365mmXW365mmXW--240mmXH240mmXH--155mm155mm850gms.850gms.65sec65secIMMEDIATELY AFTER RECEIPT OF YOUR L. C.IMMEDIATELY AFTER RECEIPT OF YOUR L. C.

NAGIMA CRATENAGIMA CRATENAGIMA CRATE

NESTABLE STACKABLE CRATE MOULDMOULD MADE IN ITALY AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD WEIGHTARTICLE SIZE

ARTICLE WEIGHTCAPACITYCYCLE TIMESHIPMENT

H-590mm X W-560 X L-465mm1.3 TONS. .O.D. L-390mmXW-370mmXH-263mmI.D. L-350mmXW-272mmXH-250mm1.5 kg.24 LITRES65secIMMEDIATELY AFTER RECEIPT OF YOUR L. C.

100 CC ROOT TRAINER100 CC ROOT TRAINER100 CC ROOT TRAINER (SINGLE CELL)(SINGLE CELL)(SINGLE CELL)

SINGLE CELL 24 CAVITY 100 CC ROOT TRAINER MOULDMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTNo. of CAVITYNo. of CAVITYARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENT

HH--420mm X W420mm X W--520mm X L520mm X L--600mm600mm1 T1 T24 CAVITY24 CAVITY2525 gmsgms..36 Sec.36 Sec.IMMEDIATELY AFTER RECEIPT OF YOUR L. C.IMMEDIATELY AFTER RECEIPT OF YOUR L. C.

150 CC ROOT TRAINER150 CC ROOT TRAINER150 CC ROOT TRAINER (SINGLE CELL)(SINGLE CELL)(SINGLE CELL)

SINGLE CELL 24 CAVITY 150 CC ROOT TRAINER MOULDMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZENo. of CAVITYNo. of CAVITYARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENT

HH--396mm X W396mm X W--520mm X L520mm X L--600mm600mm24 CAVITY24 CAVITY2626 gmsgms..45 Sec.45 Sec.IMMEDIATELY AFTER RECEIPT OF YOUR L. C.IMMEDIATELY AFTER RECEIPT OF YOUR L. C.

150 CC ROOT TRAINER150 CC ROOT TRAINER150 CC ROOT TRAINER (24 CELL)(24 CELL)(24 CELL)

24 CELL BLOCK TYPE 150 CC ROOT TRAINER MOULDMOULD MADE IN TAIWAN AND IS IN EXCELLENT WORKING CONDITION

MOULD SIZEMOULD SIZENo. of CAVITYNo. of CAVITYARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENT

HH--396mm X W396mm X W--520mm X L520mm X L--600mm600mmDOUBLE CAVITYDOUBLE CAVITY700700 gmsgms..50 Sec.50 Sec.IMMEDIATELY AFTER RECEIPT OF YOUR L. C.IMMEDIATELY AFTER RECEIPT OF YOUR L. C.

421604216042160 ---NANANA

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENT

LL-- 325 mm X W325 mm X W-- 520 mm X L520 mm X L-- 640 mm.640 mm.3.3 TONS.3.3 TONS.GmsGms..SecSecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.

MINI CRATEMOULD MADE IN ITALY AND IS IN EXCELLENT WORKING CONDITION

34 x 3434 x 3434 x 34 ---NANANA

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENT

HH-- 1050 mm X W1050 mm X W-- 870 mm X L870 mm X L-- 880 mm.880 mm.6.3 TONS.6.3 TONS.CHCH -- 23002300 GmsGms. / JR. / JR –– 20902090 GmsGms..CHCH -- 80 Sec. / JR80 Sec. / JR –– 103 Sec.103 Sec.ONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.

SQUARE CRATE WITH 550 mm HEIGHT, CLOSED / PERFORATED VERSIONS.MOULD MADE IN ITALY AND IS IN EXCELLENT WORKING CONDITION

421384213842138 ---NANANA

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENT

HH-- 320 mm X W320 mm X W-- 415 mm X L415 mm X L-- 610 mm.610 mm.0.65 TONS.0.65 TONS.770770 GmsGms..65 Sec65 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.

MINI CRATEMOULD MADE IN ITALY AND IS IN EXCELLENT WORKING CONDITION

LID 4737LID 4737LID 4737 ---NANANA

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENT

LL-- 310 mm X W310 mm X W-- 510 mm X L510 mm X L-- 710 mm.710 mm.0.88 TONS.0.88 TONS.475475 GmsGms..48 Sec48 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.

470 x 370 mm CRATE LID MOULD.MOULD MADE IN ITALY AND IS IN EXCELLENT WORKING CONDITION

LID CLIP MOULD NOT INCLUDED

LID 6545LID 6545LID 6545---NANANA

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENT

HH-- 750 mm X W750 mm X W-- 770 mm X L770 mm X L-- 800 mm.800 mm.3.6 TONS.3.6 TONS.830830 GmsGms..90 Sec90 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.

650 x 450 mm CRATE LID MOULD.MOULD MADE IN ITALY AND IS IN EXCELLENT WORKING CONDITION

LID CLIP MOULD NOT INCLUDED

TOOL BOXTOOL BOXTOOL BOX

SET OF MOULDS FOR 3 SIZES TOOL BOXES (SMALL / MEDIUM / BIG)MOULD MADE IN ITALY AND IS IN EXCELLENT WORKING CONDITION

MOULD No. OFCAVITIES

Wt.Gms.

CYCLETIME

MOULD DIMENSION IN mm MOULD

H W L WEIGHT (Tons)

TOOLBOXBODYBIG-A 1 CAVITY 1550 78 755 650 900 3.47

TOOLBOXBODYMED-A 1 CAVITY 928 73 620 550 750 2.01

TOOLBOXBODYSML-A 1 CAVITY 764 66 610 550 650 1.71

TOOLBOXBUCKLE-A 4 CAVITY 19 24 240 300 300 0.17

TOOLBOXHANDLE-A 2 CAVITY 141 88 260 400 350 0.29

TOOLBOXHANDLECOV-A 2 CAVITY 24 68 220 230 250 0.10

TOOLBOXLIDBIG-A 1 CAVITY 864 90 470 600 900 1.99

TOOLBOXLIDMED-A 1 CAVITY 296 33 450 670 750 1.78

TOOLBOXLIDSML-A 1 CAVITY 248 49 450 500 650 1.15

TOOLBOXSEPARBIG-A 8 CAVITY 7 7 230 300 450 0.24

TOOLBOXTRAYBIG-A 1 CAVITY 772 90 530 600 900 2.25

TOOLBOXTRAYMED-A 1 CAVITY 567 63 620 550 750 2.01

TOOLBOXTRAYSML-A 1 CAVITY 462 65 530 540 600 1.35

COULT24COULT24COULT24 –––NANANA

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTMACHINE SIZEMACHINE SIZE

HH-- 665 mm X W665 mm X W-- 790 mm X L790 mm X L-- 940 mm940 mm3.8 TONS.3.8 TONS.1.51.5 KgsKgs..45 Sec45 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.650T650T

24 BOTTLE FULL DEPTH CRATE FOR COCACOLA “ULTRA BOTTLE”MOULD MADE IN GERMANY AND IS IN EXCELLENT WORKING CONDITION

COULT-24

SIZE- 422 x 281 x 210 mm

Pocket Size – 64 x 64 mm

COD 24COD 24COD 24 ---NBNBNB

MOULD SIZEMOULD SIZEMOULD WEIGHTMOULD WEIGHTARTICLE WEIGHTARTICLE WEIGHTCYCLE TIMECYCLE TIMESHIPMENTSHIPMENTGATE POINTGATE POINTMACHINE SIZEMACHINE SIZE

HH-- 600 mm X W600 mm X W-- 795 mm X L795 mm X L-- 945 mm945 mm3.54 TONS.3.54 TONS.1.641.64 KgsKgs..36 Sec36 SecONE MONTH AFTER RECEIPT OF YOUR L. C.ONE MONTH AFTER RECEIPT OF YOUR L. C.4 POINT HOT RUNNER SYSTEM.4 POINT HOT RUNNER SYSTEM.650T650T

24 BOTTLE CRATE FOR COCACOLA “FULL DEPTH FULL DISPLAY”MOULD MADE IN GERMANY AND IS IN EXCELLENT WORKING CONDITION

COD-24

SIZE- 422 x 281 x 285 mm

Pocket Size – 64 x 64 mm