1

2

Copyright

Copyright © Edimax Technology Co., Ltd. all rights reserved. No part of this

publication may be reproduced, transmitted, transcribed, stored in a retrieval system,

or translated into any language or computer language, in any form or by any means,

electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without

the prior written permission from Edimax Technology Co., Ltd.

Edimax Technology Co., Ltd. makes no representations or warranties, either

expressed or implied, with respect to the contents hereof and specifically disclaims

any warranties, merchantability, or fitness for any particular purpose. Any software

described in this manual is sold or licensed as is. Should the programs prove

defective following their purchase, the buyer (and not this company, its distributor, or

its dealer) assumes the entire cost of all necessary servicing, repair, and any

incidental or consequential damages resulting from any defect in the software.

Edimax Technology Co., Ltd. reserves the right to revise this publication and to make

changes from time to time in the contents hereof without the obligation to notify any

person of such revision or changes.

The product you have purchased and the setup screen may appear slightly different

from those shown in this QIG. For more information about this product, please refer

to the user manual on the CD-ROM. The software and specifications are subject to

change without notice. Please visit our website www.edimax.com for updates. All

brand and product names mentioned in this manual are trademarks and/or

registered trademarks of their respective holders.

Notice according to GNU/GPL-Version 2

This product includes software that is subject to the GNU/GPL-Version 2. You find

the text of the license on the product cd/dvd. The program is free software and

distributed without any warranty of the author. We offer, valid for at least three

years, to give you, for a charge no more than the costs of physically performing

source distribution, a complete machine-readable

copy of the corresponding source code.

Please contact Edimax at: Edimax Technology co., Ltd, NO. 3, Wu-Chuan 3rd RD

Wu-Ku-Industrial Park, Taipei Hsien, Taiwan. R.O.C., TEL : +886-2-77396888, FAX :

+886-2-77396887, sales@edimax.com.tw

3

MMuullttii--LLaanngguuaaggee QQIIGG oonn tthhee CCDD

ČČeesskkýý Českého průvodce rychlou instalací naleznete na

přiloženém CD s ovladači.

DDeeuuttsscchh Auf der beiliegend Treiber CD finden Sie deutsche

Anleitung zur Schnellinstallation.

EEssppaaññooll Incluido en el CD el G.R.I. en Español.

FFrraannççaaiiss Veuillez trouver l’français G.I.R ci-joint dans le CD.

IIttaalliiaannoo Incluso nel CD il Q.I.G. in Italiano.

MMaaggyyaarr A magyar telepítési útmutató megtalálható a mellékelt

CD-n.

NNeeddeerrllaannddss De nederlandse Q.I.G. treft u aan op de bijgesloten CD

PPoollsskkii Skrócona instrukcja instalacji w języku polskim

znajduje się na załączonej płycie CD.

PPoorrttuugguuêêss Incluído no CD o G.I.R. em Portugues.

РРууссссккиийй РРууссссккиийй:: Найдите Q.I.G. на pусскoм языке на

приложеном CD.

RRoommaanniiaa Cd-ul cuprinde Ghid de instalare rapida in limba

romana.

TTüürrkkççee Ü rün ile beraber gelen CD içinde Türkçe Hızlı Kurulum

Kılavuzu'nu bulabilirsiniz.

4

Thank you for purchasing this wireless projector server! This wireless projector

server supports both Windows and Mac OS. If your projector server does not

work with Mac OS, please download the latest firmware at www.edimax.com.

Before you start using this product, please check if there is anything missing in

the package, and contact your dealer to claim the missing item(s):

Packaging List

Item No. Name Quantity

1 Wireless Projector Server 1

2 12V Power Adapter 1

3 Ethernet Cable 1

4 Remote Control 1

5 Quick Installation Guide 1

6 CR-2302 Lithium Battery

(installed in the remote control)

1

7 Rubber Foot Pad 4

8 CD (Multi-language User Guide & Manual) 1

9 3dBi Antenna 2

5

Front

Name Description

PWR Switches this projector server on and off

WPS WPS (Wi-Fi Protected Setup) activation button

Remote control

receiver

IR signal receiver (for the remote control)

PWR LED Indicates whether this wireless projector server is on

LAN LED Indicates whether a LAN device is connected

WLAN LED Indicates whether there is wireless LAN activity

USB AF port Connects keyboard / mouse

USB BF port Connects a computer to the projector server to display

the contents of the computer on the video display directly

6

Back

Name Description

12VDC Connects to the supplied power adapter

Reset Press and hold this button for 5 seconds to reset the

projector server to factory defaults

Antennas

(left and right)

For wireless signal transmission

VGA Connects to any VGA-compatible display

Audio Output Connects to speakers or an audio amplifier

LAN 10/100/1000Mbps Ethernet port

External IR Connects to an IR extender cable

7

Remote Control

Name Description

Black out Press this button to black out the contents on the external

display; press this button again to resume

Menu Switches between a computer‟s display content and the

configuration menu

Page down Equivalent to the “Left” key on a computer‟s keyboard

Page up Equivalent to the “Right” key on a computer‟s keyboard

Prev. Switches to the previous presenter or equivalent to the

“Up” key on a computer‟s keyboard

Next Switches to the next presenter or equivalent to the “Down”

key on a computer‟s keyboard

Press to select the presenter in the projector server‟s

configuration menu

Battery cover Press the battery cover and push it backwards to open the

battery compartment (to install or remove the CR 2032

lithium battery)

Battery cover

8

Projector Server Setup

If you plan on putting the projector

server on a desk or other horizontal

surfaces, stick the foot pads on the 4

locations as indicated is the picture.

Skip this step if you plan on hanging

the projector server on the wall.

Connect the Ethernet cable to the

LAN port (this port is labeled as “LAN”

and is located at the back of this

projector server).

Connect the projector server to an

amplifier or a set of speakers via the

audio port.

You can skip this step if you do not

have an amplifier or speakers.

9

Connect the projector server to a

video display via the VGA connector.

Adjust the antennas so they are

perpendicular to the ground.

Connect the power adapter to an

electrical outlet

10

Insert the power connector into the

“12V” socket at the back of the

projector server.

Press the “Power” button located at

the front of the projector server.

Check the “Power” LED. If it is not on, refer to the “Troubleshooting” section in the user manual.

11

Using the Projector Server

Press the “Power” button at the front

of the projector server. You should

be able to see this image on the

screen.

Please wait for about 60 seconds for

the projector server to start up.

Projector server will acquire an IP

address from the DHCP server on

your LAN automatically, and the IP

address will be displayed at the

bottom-left corner of the display of

attached projector or monitor.

If there‟s no DHCP server on your

LAN, projector server will use

„192.168.2.10‟ as default IP address.

The projector server‟s IP addresses

can be found on the lower-left corner

of the connected display.

The login code can be found on the

lower-right corner of the connected

display.

12

Connecting to the projector server

wirelessly:

Search for the projector server‟s

SSID and establish a connection.

Then open your browser and key in

the WLAN IP address.

(SSID: Edimax Projector)

(IP address: 192.168.100.10)

Connecting to the projector server via Ethernet:

If you wish to connect to the WP-S1300 via an Ethernet cable, please refer to chapter 2-3 of the

manual to set up an IP address for the computer first.

(Wired IP address: 192.168.2.10)

Click the “Start” button to download

the client software.

13

When you are prompted to download

the software, click “Run”.

Click “Run” to start software

installation.

If you see this message, click

„Unblock‟.

(You must click „Unblock‟ or client

utility will become unusable).

14

When the installation is complete, an

icon named “WPS” will appear on

your computer‟s desktop:

The client software will search for the

projector server connected to your

local area network, and the projector

server‟s SSID will be displayed in the

“Projector SSID” field. Enter a user

name (can be anything that allows

others to identify you), and the login

code displayed on the screen.

The projector server will obtain your

user name from your computer

automatically.

Note : If the display resolution of your

computer is not 1024 x 768, your PC

resolution will be changed.

Click to start presentation. The

display content of your computer will

be displayed on projector / monitor.

Click „1‟, „2‟, „3‟, or „4‟ to display at a

specific display area (see user

manual for detailed instruction).

15

To stop presentation, click „ ‟

button.

Note: Please refer to the user manual in the CD-ROM for more detailed

information on Internet connection type and other settings.

16

Declaration of Conformity

We, Edimax Technology Co., LTD., declare under our sole responsibility, that the

equipment described below complies with the requirements of the European R&TTE

directive (2006/95/EC).

Equipment : Wireless 802.11b/g/n Projector Server

Model No. : WP-S1300

The following European standards for essential requirements have been followed:

Spectrum : ETSI EN 300 328 V1.7.1(2006-10)

EMC : EN 301 489-1 V1.8.1(2008-4)

EN 301 489-17 V2.1.1(2009-05)

EMF : EN 50385 : 2002

Safety (LVD) : IEC 60950-1:2005 (2nd Edition)

EN 60950-1 : 2006+A11:2009

Edimax Technology Co., Ltd.

No. 3, Wu Chuan 3rd Road,

Wu-Ku Industrial Park.

Taipei Hsien, Taiwan

Date of Signature : January ,2011

Signature :

Printed Name : Albert

Title : Director

Edimax Technology CO., LTD.

17

FFeeddeerraall CCoommmmuunniiccaattiioonn CCoommmmiissssiioonn IInntteerrffeerreennccee SSttaatteemmeenntt

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio technician for help. FCC Caution

This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. Federal Communications Commission (FCC) Radiation Exposure Statement

This equipment must be installed and operated in accordance with provided instructions and a minimum

20 cm spacing must be provided between computer mounted antenna and person‟s body (excluding

extremities of hands, wrist and feet) during wireless modes of operation.

The equipment version marketed in US is restricted to usage of the channels 1-11 only. R&TTE Compliance Statement

This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE) The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000. Safety

This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment. EU Countries Intended for Use

The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, Bulgaria, Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Poland, Romania, Slovakia, Slovenia, the Netherlands, Portugal, Spain, Sweden, and the United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland. EU Countries not intended for use

None A declaration of conformity is available on www.edimax.com

18