Embed Size (px)
Citation preview
NPM User Manual
1
NPM 3100 (Network Power Manager)
User Manual
NPM User Manual
2
Contents Ⅰ. NPM Introduction .........................................................................................................................................3
Ⅱ. Function Description ....................................................................................................................................3
Ⅲ. Applied Range ..............................................................................................................................................3
Ⅳ. Product Picture & Description ......................................................................................................................4
Ⅴ. Mounting Method .........................................................................................................................................5
Ⅵ. Hardware Introduction..................................................................................................................................5
1. Powering on & Self-check........................................................................................................................5
2. Current, Temperature & Humidity Monitoring.........................................................................................5
3. Water logging & Smoke Monitoring ........................................................................................................5
4. Outlet Fault Monitoring............................................................................................................................5
5. Individual Current, Total Current, Temperature & Humidity Over Limit Monitoring…………………..5
6. Self-checking Parameter Monitoring........................................................................................................5
7. Stopping Alarm Monitoring......................................................................................................................5
8. Master / Slave NPM Configuration ..........................................................................................................6
9. Daisy-chain Connection Method ..............................................................................................................6
10. Radialized Connection Method ..............................................................................................................6
11. Software Upgrade in Hardware...............................................................................................................7
Ⅶ. Software Introduction ...................................................................................................................................8
1. Software Overview ……………………..………………………………………………………..… ...…8
2. Access Method..................……………………………………………………………………...…....8
3. Device Daisy-chain.…………………………………………… ………………………….…….....24
4. Frequently Asked Questions..………………………………….……………………….…..…….....25
NPM User Manual
3
Ⅰ. NPM Introduction
NPM can monitor, control and manage the power supply of many equipments in cabinets in data room all over
the world through LAN or WAN. For meeting with the restrictions and requirements in different environment,
NPM supplies many connection methods; can be connected through RJ45 in the LAN and WAN; can be accessed
and controlled through standard network management station.
Ⅱ. Function Description
1. Monitoring function: by the cooperation of LED screen and knob on NPM, user can monitor the total load
current, voltage, individual load current (exclude NPM A and C series), power on/off state of individual outlet
(exclude NPM A and B series), temperature/humidity, smoke, water logging, door opening/closing state. User can
also monitor through LAN or WAN.
2. Controlling function (for NPM C and D series): turn on/off individual outlet, set the interval of sequential
power on/off, set the time for outlet power on/off.
3. Keeping the original state (for NPM C and D series): keep the original state of each outlet when resetting.
4. User-defined alarming: the limit of total load current, individual load current (for NPM B and D series) and
temperature/humidity.
5. System default alarming: system alarming when total load current, individual load current beyond the limit (for
NPM B and D series), individual outlet breaks down, smoke appears, water logging or door opening.
6. Alarming methods: problem information show on LED screen and NPM buzzer alarms, the problem value
flashes on web interface and PC buzzer alarms, automatically send e-mail to system administrator, SNMP
sends alarm information, wireless telecommunication report to administrator.
7. KwH maturement: measure the total Kilowatt per hour
8. Daisy-chain: can daisy-chain at most 9 pcs NPM.
9. Alarming record: record and save the alarming information which can be checked and exported. (Note: record
can only be checked in order. Record information concludes overload, temperature/humidity beyond the limit,
smoke appears, water logging, door opening/closing, outlet breaks down and the insert and pull out of the
sensors)
10. User management: User right configuration
11. Safe mode turn-off: remote soft turn off the NPM
12. Access method: Web, through IE, SNMP (V1/V2/V3) or Telnet, SSH to access and control.
13. Support multi-user operation system and software upgrade.
NPM User Manual
Ⅲ. Applied Range
1. NPM 3100 can be applied to server cabinet, network cabinet etc.
2. The socket quantity (8 or 12) and socket standard (C13, C19, NEMA5-15R, NEMA5-20R) of NPM 3100 can
be selected.
3. NPM 3100 conforms to RoHS instruction, suitable for 110VAC and 220VAC power supply, can meet the
customers’ different requirements all over the world.
Ⅳ. Product Picture & Description
4
1&19: outlets
2. Port1：The software upgrade port of hardware
3. LINK: when daisy-chain NPM, connect with the SER port of the next NPM
4. SER: for daisy-chain
5. NET: RI 45 port to connect PC, Hub, router or switch.
6. No.2: select outlet
7. RESET: set master or slave NPM and reset NPM (press 30 seconds)
8. Mounting bracket
9/10. Display NPM address and other parameters
11. RUN：operation indicator
12. M/S：Master/slave indicator
13. OUTLET No. 1：select outlet and other parameters (T/H)
14. Door1、Door2：connect door sensor
Front
1 2 3 4 5 6 7 8
9 10 11 12 13
17 18 20 21
15 16 14
19
Back
NPM User Manual 15. Water: connect water sensor
16. Smoke: connect smoke sensor
17. T/H1, T/H2, T/H3: connect temperature/humidity sensor
18. Port2：RS485 spare port
20. Overload protection
21. Cable input
Ⅴ. Mounting Method
Horizontal installation.
. Hardware IntroductionⅥ
1. Power on & Self-check
The buzzer makes a sound when NPM is connected with AC power source, LED screen lightening and
sequentially display 8.8.8. 8.8.8. (it means digitron is normal, any different display means fault), software
version number (for example U0.0 1.01), baud rate (for example9 600), NPM default address (For example
ABC DEF), NPM series (for example310 1-d), socket quantity(for example OU7 08), finally display the
value of which OUTLET No.1 pointing to (for example A1 0.0), and RUN indicator flashes. M/S indicator on
means this NPM is master while off means slave NPM.
2. Current, voltage, temperature & humidity Monitoring
OUTLET No.1 and OUTLET No.2 are together used to monitor the relative outlet value (OUTLET No.2 has the
function of plus 8 port or minus 8 port).
3. Water logging & Smoke Monitoring
3.1 When the water logging sensor monitoring the water, NPM LED screen displays and the buzzer
alarms at the same time.
3.2 When the smoke sensor monitoring the smoke, NPM LED screen displays ，and the buzzer alarms at
the same time.
4. Outlet Fault Monitoring
When one outlet breaks down (For example: A1), the NPM LED screen will display relative fault (for example:
A1 Err）, and the buzzer alarms at the same time.
5. Individual current, total current, voltage, temperature & humidity over the Limit monitoring
5.1 When individual load current, total load current, voltage, temperature & humidity value are lower than the
Min., the NPM screen displays as A.1 (that means the load current of outlet No. 1 is lower than the Min. value)
5.2 When individual load current, total load current, voltage, temperature & humidity value are higher than the
5
NPM User Manual Max., the NPM screen displays as A.1.. (that means the load current of outlet No.1 is higher than the Max. value)
6. Self-checking Parameter Monitoring
Make the OUTLET N0.1 display - - - - - -, then press reset button, the NPM LED screen sequentially display
the NPM self-checking parameter for one minute.
7. Stopping alarming
Click the RESET button to stop alarming for one minute (When NPM3100 has alarm information, OUTLET
No.1 has no function, you have to stop the alarming for one minute then you can check other information. But it
will continue alarming after one minute until you have modified the fault.)
8. Master / Slave NPM Configuration
Press the RESET button for 10-13 seconds, the indicator of M/S on indicates the NPM is the master NPM; Press
the RESET button for 5-8 seconds, the indicator of M/S off indicates the NPM is the slave NPM. Account the
time please refer to the RUN indicator (T= 2S)
9. Daisy-chain Connection Method
9.1 Each NPM owns the sole default address which is different from others. The address has been locked before
leaving factory and can not be changed.
9.2 Set one NPM as master and the others as slaves. One master can daisy-chain 9pcs NPM slave at most.
9.3 One end of the network wire connects to the LINK port of the master NPM, the other end connects to the
SER port of the first slave NPM, then use one end of another wire connects to the LINK port of the first slave
NPM, the other end connects to the SER port of the next slave NPM. Use the same way to connect other slave
NPM.
9.4 One end of the network wire connects to the net port of the PC; the other end connects to the NET port of the
NPM, then through IE to access. (Details please refers to the software introduction)
10. Radialized Connection Method
6
NPM User Manual
10.1 Set one NPM as master and the others as slaves. One master can link 9pcs NPM slave at most
10.2 One end of the network wire connects to the net port of the PC; the other end connects to the NET port of
the NPM
10.3 One end of the network wire connects to the LINK port of the master NPM, the other end connects to the
RJ45 port of the HUB (special HUB for NPM link from CLEVER)
10.4 Use the end of another network wire connects to another in/out port of the HUB, the other end connects to
the SER port of the slave. Each in/out port of HUB connects to the SER port of one slave NPM, can link 9pcs
slave at most.
10.5 Through IE to access (Details please refers to the software introduction)
11. Software Upgrade in Hardware
11.1 Clever will provide the file of software upgrade ，please save it in your PC
11.2 Please open the software upgrade file ，then double click this file to install
the software.
11.3 Operate this software after installation, see the following picture:
7
NPM User Manual
8
of the signal wire for upgrade software (special wire, it must from CLEVER) inserts to PORT1
on NPM, DB9 end inserts to the RS232 port of PC
11.5 Please select the correct series port in
11.4 The RJ45 end
, make other selection according the picture
11.6 Click in , add the file .
11.7 Power on the NPM
11.8 Click , it will show when read successfully; if fails, please check the
connection wire and the communication port
11.9 Click , it will show when erase succeeds; If fails, please
check the connection wire and the communication port
11.10 Click , it will show when uploading the file succeeds; if fails,
n wire and the communication port
ED screen will show the new version which means the software upgrade successful and
ction
tus with its multiple-user
ndly administration interface and compatible network connection.
, the user can carry out the remotely control and management
er、SNMP、SSH and Telnet.
stem will automatically log out if the user
please check the connectio
11.11 Power off the NPM
11.12 Power on the NPM, L
then it can work normally.
Ⅶ. Software Introdu
1. Software overview
This software is a technology that employs the total embedded system solution. It is based on the monitoring
technology of SNMP standard protocols，encryption of SSH data transmission, sensor network node technology and
other high-tech technologies. Through the network the user can timely monitor and remotely control the devices
power and micro environment in the cabinet. It help user to monitor、control and manage the status of each outlet as
well as the sensor of environment temperature, humidity, smoke, water, door open sta
operation system、frie
2. Access Method
By connecting the devices to the LAN or WAN
through IE brows
2.1. IE Access
Open the IE browser (only support IE6.0 and IE7.0 version currently), input the device IP address and log on to the
administration interface with the correct user name and password, The sy
NPM User Manual
9
ce is made up of three parts: the system information interface、user guide menu and the
er name and function menu, it helps and guides the user complete the operation
or、control and manage the devices through the device control interface.,
as below 1）to 16):
tch on/off of the each outlet and look over the status of outlets and basic
below:
as the current of individual outlet. The digit of current in red will
ws the switch on/off status of outlets:
input the incorrect user name or password for three times consecutively.
The administration interfa
device control interface.
The system information interface: mainly contain the company Logo as well as the device current IP address;
User guide menu: display the us
conveniently and promptly;
Device control interface: the user can monit
please see the details
1) Device Control
"Device Control" interface control the swi
information of sensors, details as
a) to view the model of device;
b) "output Name" display the name of each outlet;
c) "current" display the total load current as well
flash when it's over the limiting value to alarm
d) "Output Status" sho means on, means off, means problem
ice and its default status was "NONE", the user can switch on/off single outlet, multiple-outlet
consumption can be read if the device equipped with power consumption meter. If not, it will display
ad if
e equipped. If not, it will display "Not found". The digit in red will flash if the sensors alarm.
Temperature/Humidity sensor is connected. The digital figures in red will flash if it's over the
d" means no door sensors are connected. The word
occurred to the outlet;
e) "Control" controls the switch on/off: "ON" means switch on, "OFF" means switch off, "REBOOT" means
restarting the dev
or all outlets;
f) The load current can be read if the device equipped with ampere meter. If not, it will display" Not found"
g) The power
"Not found"
h) The corresponding value and status of temperature, humidity, smoke, water logging and door open can be re
all this sensors ar
2) Sensor Status
View the current status of all these sensors. Details as below:
a) "Temperature/Humidity" displays the current temperature/humidity sensor connection status and value. "Not
found" means no
value to alarm.
b) "Door" displays the connection status of door. "Not foun
"open" in red on the screen will flash if the door is opened.
NPM User Manual
10
r "OPEN" can be read on the screen if connected. The word "YES" in red will flash if smoke
d
d when connected. The word "YES" in red will flash if water-logging alarm happens.
re the device series number, input outlet name as well as the interval of sequential power on/off, details as
n not normally monitor and manage the
ch as long as 20 bytes;
Interval": configure it according to specific requirement; the interval is between 0 to 255 seconds.
address、Sub-net Mask、default gateway DNS according to different application environment, details
.255.255.0
is 0.0.0.0, any DNS address of normal domain name resolution, make sure the
iguration information will be valid after system reboot.
the time of power on/off, the device automatically switch on/off according to the set time, details as
peat", the device will automatically power on/off daily according to the time set by user if setting
ent, temperature/humidity threshold and ensure the devices operation well in normal status, details as
c) "Smoke alarm" displays the connection of smoke sensor, "Not found" means no smoke alarm is connected. The
word "CLOSE" o
alarm happens.
d) "Water logging" displays the status of water sensor, "Not found" means no water sensors is connected. The wor
"YES" or "NO" can be rea
3) Device Configuration
Configu
below:
a) " NPM Address No": each device has a unique series number; the user ca
device if the displayed figure is not the same as the device series number.
b) " NPM name": configure the device name which can rea
c) Configure outlet name, it can reach as long as 35 bytes;
d) "Sequence
4) Network
Configure IP
as below:
a) IP address: LAN or WAN IP address, the default IP is 192.168.1.163
b) Sub-net Mask: correspond with IP; the default sub-net mask is 255
c) Gateway: correspond with IP; the default gateway is 192.168.1.1;
d) DNS address: the default DNS
e-mail can be send successfully
Note: network conf
5) Timing Control
Configure
below:
a) Click on “Setting" to adjust time and make sure the time is the same with the PC
b) "ON Timing" time of power on setting, the format is: yy/mm/dd hours: minutes:
"OFF Timing" time of power off setting, the format is: yy/mm/dd hours: minutes:
c) Select "Re
success.
6) Threshold Value
Set curr
NPM User Manual
11
or 0~32(A), connecting to the load, the device
midity rate: 0~100(100%), the sensor will alarm when the
lue can not be smaller then the Min. value.
r by
en the current, temperature/humidity exceed the limiting value or any problem occurred.
g;
when device alarms, only single user setting is available to the
larm count on the browser, the voice alarm can not be realized when the browser is closed
.
ddress
e: the way of e-mail login (general e-mail default as: LOGIN), select the login way according to
ail address of receiver, the user can fill one or more receiver, but all the receive address must
ss, each address must be separated by ";"
l: interval of email sending
from exceeding
below:
a) Individual outlet current rate: 0~10(A), total current rate: 0~16(A)
will alarm when the current exceed the set limiting value of current.
b) Temperature rate setting: -40~215(℃), Hu
temperature/humidity exceed the limiting value.
Note: the Max. va
7) Alarm Setting
Set the style of alarm, voice alarm and e-mail alarm. The alarm information will be sent to the administrato
voice or e-mail wh
a) Voice alarm:
♦ Select the voice document from the PC through the interface prompt, save it after testin
♦ The interface displays the path of the voice document and prompt of setting success;
♦ The PC will alarm through the voice set by user
voice path and only one voice path can be saved.
Note: The voice a
b) E-mail alarm:
♦Select “Enable e-mail alarm"
♦POP3 address: receive e-mail server address, e.g. Sina POPS3 address: pop.sina.com;
♦SMTP address: deliver e-mail server address, e.g.Sina SMTP address: smtp.sina.com;
♦Port: delivery e-mail port (general e-mail port: 25), input the corresponding output port according to e-mail level
♦User name: input the receive e-mail address, make sure this e-mail address is accordant with the SMTP a
♦User Password: fill in the e-mail password of sender, the password is accordant with e-mail of sender.
♦Authentication typ
the level of e-mail
♦To address: the e-m
be separated by ";"
♦Cc to: fill in one or more CC-email addre
♦From address: the same with User name
♦Repeat interva
8) Alarm Logs
Automatically record the alarm information and data, offer viewing and leading out function, details as below:
a) Daily record the alarm and recovering information of current overload, temperature/humidity
NPM User Manual
12
d disconnection;
information;
records" to clear all the record information of single device.
on, time of update, hardware address( MAC), RAM space, CPU occupancy rate
arm Setting, Web, Console,
ser Manage and other configuration of menu; it will be valid after rebooting.
port is 80;
TP enable and can not be closed
ing will be valid after system reboot.
devices Telnet and SSH access method, details as below:
m defaults status was "Enabled"
e the Telnet port according to requirement of user, the default port was: 23
t, the system default status is "Disabled"
anged Console configuration will be valid after reboot
" or "Disabled" to decide starting the SNMP function or not through drop-down menu of "SNMP
tus of these three items is:
lagraph of SNMP trap from 1 to 65535 seconds, better to above 10 seconds, the defaults time is 30
limitation, problem occurrence and the status information of sensor connection an
b) "Select Device" to select and view the single device daily record
c) Select "First", "Previous" "Next" to view the daily record;
d) Select "WEB" or "EXCEL" to leading-out the daily record information;
e) "clear all
9) System
a) View the latest software versi
and total system operation time.
b) Click "reset system settings" to restore factory settings e.g. Device Configuration, Al
SNMP, U
10) Web
Configure HTTP, user can enable or disable the HTTP port, details as below:
♦ Set and save the HTTP port according to the network environment, the default HTTP
♦ Select "Enable" to start and save HTTP, set the HT
Note: the sett
11) Console
Configure
a) Telnet
♦ Select "Enabled" or "Disabled" to decide start the Telnet function or not, the syste
♦ Chang
b) SSH
♦ Select "Enabled" or "Disabled" to decide start SSH function or no
Note: the ch
12) SNMP
"SNMP" interface configure the SNMP access method, details as below:
a) Select "Enabled
Agent" interface;
b) Set the character string of "get" "set" "trap" respectively. Get community is to offer read-only channel mark of
visiting the MIB object, set community is to offer the read-write channel mark of visiting MIB object, TRAP
community is the style mark of all TRAP information generated and sent. The default sta
public, private, private. The length of the community string must be between 1-24 bytes.
c) Set calcu
NPM User Manual
13
on, the
n set 2 Trap Destinations.
system name.
ation
MP configuration will be valid after reboot
ed when upgrading, the user can complete
as below:
and select the the image.bin file path on the PC
cally when file submitting successfully (letters in blue), which means the
o power failure, no network disconnected and no operation on the interface when upgrading
at most. The user name can only be made up of letters, number and underline;
inistrator can open the "Edit" which under the Action menu to modify the password and lever of all the
it" which under the "Control Rights" menu to view and assign the user's right, the
ion, power on/off automatically, limiting value to alarm setting, alarm setting, daily
ation and so on.
does not affect the normal
y. The system will automatically pop the login window when system restart.
seconds.
d) Set trap destination, input the SNMP management platform object address in the frame of Trap Destinati
Trap information will be sent to the corresponding address automatically, user ca
e) The system name of SNMP records the information of SNMP
f) SNMP server position record the server position inform
Note: the SN
13) Update
To upgrade the software, the image.bin file packet from supplier is requir
the updating process according to the prompt message, details
a) Connecting device and the PC directly by network cable.
b) Click "Browse"
c) Click "Update"
d) Return to prompt information automati
update document submitted successfully.
e) Waiting for the system pop the login window after software system initialized when file submit successfully.
Note: Make sure n
14) User manage
Create or delete user account and configure user's right, details as below:
a) The administrator can add 5 users
other character can not be filled in.
b) Adm
users.
c) Administrator can delete users, but the last administrator can not be deleted.
d) Administrator can open the "Ed
administrator holds all the right.
Note: General user can only monitor and manage the assigned devices status, sensor status, device configuration
information, network configurat
record inform
15) Restart
"Restart" interface is designed to restart and refresh the device software system (e.g. Change the IP address, HTTP
port, Telnet port, software update), no need to cut off the power supply as this operation
power suppl
NPM User Manual 16) Logout
14
ssage to close the software system interface`
e the output port name, view the device and sensor status, receive alarm information
translating and editing success, the details information of device
1). The status of the device software, details as below:
Figure 2-1 the information table of device output status
Figure 2-2 the information ta us
Description of menu
According to the prompt me
2.2. SNMP Access Method
SNMP(Simple Network Management Protocol), this software support the V2 version of SNMP with a MIB file
which contain an enterprise number, network management system offer network management of device through
SNMP, the user can chang
through SNMP approach.
The user has to open the SNMP access method through visiting interface of IE browser, please refer to the 13th item
of IE access method SNMP introduction. Install corresponding SNMP management software after completing the
SNMP start setting, set up the configuration according to the software menu provided by SNMP software company,
leading-in MIB file on the SNMP management platform, user can monitor and manage the device status
information and alarm Trap information after
status are as detailed in figure 2-1, figure 2-2,
and sensor can be read through the table format of SNMP
Menu Description of menu
XX output ID ame, output ID display the device ID address XX stands for device n
Name The output end name
Status The corresponding switch on/off status of each output
Load Value The corresponding current of each output
Load Low limit The corresponding minimum value of each output
Load High limit The corresponding maximum value of each output
ble of device sensor stat
Menu
Device name Display the connected device name
Device Type Display the connected device model
Series No Display the current hardware device series number
ON Interval The interval of power on
Total Load Value Display the total output load current
NPM User Manual
15
1 or 1 Temperature Display the current connection status and temperature of temperature sens
Humidity 1 Display the current connection status and humidity of humidity sensor 1
Temperature 2 or 2 Display the current connection status and temperature of temperature sens
Humidity 2 Display the current connection status and humidity of humidity sensor 2
Temperature 3 or 3 Display the current connection status and temperature of temperature sens
Humidity 3 midity of humidity sensor 3 Display the current connection status and hu
Door 1 Display the current status of door sensor 1
Door 2 Display the current status of door sensor 2
Smoke Display the current status of smoke sensor
Water Logging Display the current status of waterlogging sensor
2) According to the setting of the SNMP on the IE browser interface, TRAP information will be sent to Trap
Destination automatically, the time information of alarm, device name and the alarm type will be included in the
2009 11:07:56 device
ow
16.0
nversation and power management, SSH
client agent, lots of free shared software like PUTTY are
mmand line like STATUS ON OFF、REBOOT、
、ADD、REMOVE、RESET、RESTART、QUIT
TRAP information. Overview of the TRAP information as below:
Minor 11/17/
thresholdAlert
[1] unitName.0 (DisplayString): total load
[2] deviceName.0 (DisplayString): device1
[3] alertStatus.0 (DisplayString): load l
[4] alertValue.0 (DisplayString): 7.2
[5] lowLimit.0 (DisplayString): 10.0
[6] highLimit.0 (DisplayString):
[7] pollLastState (Integer): unk
2.3. SSH command line console access
SSH(Secure Shell) is kind of protocol which provide telnet and other secure network service through unsafe
network. Besides the configuration of safe network terminal co
conversation can also be employed to safe direct connecting devices.
The configuration and client of SSH require using the PC
available or user can buy the SSH client in the market.
The SSH monitor, control and manage the device mainly through co
SHOW、SET
1). STATUS
NPM User Manual
16
tus of total output, individual
ESS】：the series number of connected device, view the current status of device according to the series
【OPTION】: View the device ure 3-1
Figure 3-1 the description tab OPTION
"STATUS" command line can be used to view the basic information of devices, sta
output and sensor; the format of command line: STATU【ADDRESS】【OPTION】
【ADDR
number;
information according to the options, as detailed in Fig
le of STATUS
【OPTION】 Description
SUMMARY ber, View the basic information of device, e.g device series, model, series num
output quantity, total load current, total voltage, and power consumption
OUTPUTS e output numbers, switch on/off status, threshold of individual and total View all th
current
NO. e, This option only require outlet No., user can only view one outlets status at a tim
e.g output name, switch on/off status, load current, and the current threshold.
SENSORS midity/door View the sensor status, e.g the current status of the temperature/hu
/water/smoke sensors and the threshold of temperature/humidity.
For instance: STATUS ABCDEF 5: View the status of output 5 of the NPM whose series number is ABCEDF, e.g
of switch on/off, load current and threshold of current.
SS】: the series number of connected device, control the status of switch on/off according to the series
【OPTION】 select the quant s, as detailed in figure 3-2:
Figure 3-2 the description on option
e: ON ABCEDF 1: Switch on the output 1 of NPM whose series number is ABCDEF
t;
【O 】 Description
the statue
2) ON
"ON" command can switch on the individual or total outputs.
Command input format: ON 【ADDRESS】【OPTION】
【ADDRE
number.
ity of the output to be controlled according to the option
table of switch
PTION
ALL Switch on all output of the device
NO. This option only require output number, switch on only one outlet at a time
For instanc
3) OFF
"OFF" command line can switch off individual or total outpu
Command input format: OFF【ADDRESS】【OPTION】；
NPM User Manual
17
ESS】: the series number of connect device, control the status of switch on/off according to this series
【OPTION】: select the output ed in figure 3-3:
Figure 3-3 the description option
OFF ABCDEF 1: Switch off the output 1 of NPM whose series number is ABCDEF
ESS】: the series number of connect device, control the status of switch on/off according to this series
【OPTION】: select the output d in figure 3-4:
Figure 3-4 the description table of REBOOT OPTION
e: REBOOT ABCDEF 1: restart the output 1 of NPM whose series number is ABCDEF
g power on/off configuration information, interval of sequential power on
OPTION】；
【OPTION】as detailed in figu
Figure 3-5 the description table of S N
【 Description
【ADDR
number
No. to be controlled according to the options, as detail
table of switch off
【O 】 escription PTION D
ALL Switch off all the output of the device
NO. This option only require output number, switch off only one outlet at a time
For instance:
4) REBOOT
"REBOOT" command line can restart the individual or total outputs.
Command line input format: REBOOT【ADDRESS】【OPTION】；
【ADDR
number
No. to be controlled according to the options, as detaile
【O 】 Description PTION
ALL Restart all the output of devices
NO. This option only require output number, restart only one outlet at a time
For instanc
5) SHOW
"SHOW" command line can be used to read the network configuration information, system information, user
management information, e-mail configuration information, SNMP configuration information, HTTP configuration
information, TELNET configuration information, SSH configuration information, device configuration information,
output configuration information, timin
configuration information and so on.
Command line input format: SHOW 【
re 3-5
HOW OPTIO
OPTION】
USERS View the user name and level
NPM User Manual
18
DEVICE View all the connected devices and corresponding serial number
SYSTEM on, update time, MAC View the system information e.g software versi
code, CPU occupancy rate, operation time
NETWORK address, sub-net mask, default View the network configuration e.g IP
gateway, main DNS and back up DNS
SNMP View the SNMP configuration information
SSH View the SSH on/off status and port configuration
TELNET n View the TELNET on/off status and port configuratio
HTTP View the HTTP on/off status and port configuration
MAIL and password,
receive address, carbon copy address, interval of alarm
View the e-mail alarm setting, e.g POP3 server address, SMTP server
address, e-mail sending port, e-mail sender's address
ONINTERVAL
【 】 View the power on interval of this 【ADDRESS】
ADDRESS
OUTPUTS
【ADDRESS】 View the output name and address information of this 【ADDRESS】
ALL g and time of power on/off of all output of this View time settin
【ADDRESS】 TIMING
【ADDRESS】 NO. 】, "NO" means outlet number, input one outlet
View time setting and time of power on/off of this individual output of
this 【ADDRESS
number at a time.
For instance: SHOW USER: view user information and level.
AY, DNS1, DNS2, HTTP, TELNET, SSH,
D, TIMIGN, ONNTERVAL of the device.
ay, DNS1 and DNS2
k IP address: 192.168.1.163
etwork configuration will be valid after reboot.
6) SET
"SET" command line can configure and control the IP, SUBNET, GATEW
SNMP, MAIL, THRESHOL
A. Network configuration
Network configuration include: IP address, Sub-net mask, Gatew
Command line input format: SET 【Network configuration】=
For instance: SEG IP=192.168.1.163: configuration networ
Note: the n
B. HTTP
NPM User Manual
19
TP 【OPTION】
【OPTION】as detailed in fi
Figure 3-6-b the description tabl
ction
onfiguration will be valid after reboot
【OPTION】
【OPTION】 as detailed in
Figure 3-6-c the description table OPTION
【
Command line input format: SET HT
gure 3-6-b
e of HTTP OPTION
For instance: SET HTTP ENABLE: enable HTTP fun
Note: HTTP c
C. TELNET
Command line input format: Set TELNET
figure 3-6-c
of TELNET
OPTION】 Description
ENABLE Set the HTTP enable
DISABLE S et the HTTP disable
PORT Set the HTTP port
For instance: SET TELNET ENABLE: enable TELNET function
LNET setting will be valid after reboot
【OPTION】
【OPTION】as detailed in fig
Figure 3-6-d the description table of SSH OPTION
SH enable
setting will be valid after reboot
【 OPTION】 Description
ENABLE Set the HTTP enable
DISABLE S et the HTTP disable
PORT Set the HTTP port
Note: TE
D. SSH
Command line input format: SET SSH
ure 3-6-d
【 OPTION】 Description
ENABLE Set the HTTP enable
DISABLE S et the HTTP disable
PORT Set the HTTP port
For instance: SET SSH ENABLE: set the S
Note: SSH
NPM User Manual
20
SNMP 【OPTION】
【OPTION】detail as figure 3
Figure 3-6-e the description table TON
【
E. SNMP
Command line input format: SET
-6-e
of SNMP OP
OPTION】 Description
ENABLE Set the SNMP enable
DISABLE Set the SNMP disable
GETC Set ity getting the character string of commun
SETC Set the character string of community
TRAPC TTA ity P character string of commun
REPTIME The interval of Trap sending
DES1 The destination 1 of Trap information to be sent
DES2 The destinati n to be sent on 2 of Trap informatio
CONTACT SNMP system contact
SYSNAME SNMP system name
LOCATION SNMP system address
For instance: SET SNMP ENABLE: set the SNMP enable
Note: "NULL" can clear the configuration; SNMP setting will be valid after reboot.
P 【OPTION】=
【OPTION】as detailed in fig
Figure 3-6-f the description table TION
【
F. MAIL
Command line input format: SET SNM
ure in 3-6-f
of MAIL OP
OPTION】 Description
ENABLE Enable e-mail alarm
DISABLE Disable e-mail alarm
POP3 Setting POP3 e-mail receive server
SMTP Setti rver ng SMTP e-mail sending se
PORT E-mail sending sever port
AUTH The a login uthentication of mailbox
USER E-mail sending address
NPM User Manual
21
PASSWORD The pa ddress ssword of e-mail sending a
TO E-mail receiving address
CC E s -mail carbon copy addres
FROM E-mail sending address
REPTIME Setting the interval of e-mail alarm sending
For instance: SET MAIL POP3=POP3.163.COM: Set POP3 server address to be POP3.163.COM
clear the setting information.
OLD 【ADDRESS】【OPTION1】【OPTION2】
【OPTION】as detailed i
igu ption table of THRES N
【OPTION 1】 【OPT 2】
Note: "NULL" can
G. THRESHOLD
Command input format: SET THRESH
n figure 3-6-g
F re 3-6-g the descri HOLD OPTIO
ION Description
L= Set the lowest value of temperature sensor 1 TEM1
S H= et the highest value of temperature sensor 1
L= Set the lowest value of humidity sensor 1 HUM1
H= Set the highest value of humidity sensor 1
L= Set the lowest value of temperature sensor 2 TEM2
S H= et the highest value of temperature sensor 2
L= Set the lowest value of humidity sensor 2 HUM2
H= Set the highest value of humidity sensor 2
L= Set the lowest value of temperature sensor 3 TEM3
S H= et the highest value of temperature sensor 3
L= Set the lowest value of humidity sensor 3 HUM3
H= Set the highest value of humidity sensor 3
L= Set the lowest value of each output current NO
H= Set the highest value of each output current
L= Set the lowest value of the total load current TOTAL
H= Set the highest value of the total load current
L= Set the lowest value of the total load current of phase A TOTALA
H= Set the highest value of the total load current of phase A
NPM User Manual
L= Set the lowest value of the total load current of phase BTOTALB
H= Set the highest value of the total load current of phase B
L= Set the lowest value of the total load current of phase C TOTALC
H= Set the highest value of the total load current of phase C
For instance: SET THRESHOLD ABCDEF TEM1 L=0 Set the lowest value of temperature sensor 1 of NPM
℃~215 ℃;
%;
: 0~-10A
S】【OPTION】
ted device
【OPTION】 as detailed i
Figure 3-6-h the description table of TIMING OPTION
The format of the time: year-month-day-week- on with 2 digits, 24-hour clock
re
Monday Tuesday Wednesday Thursday Friday Saturday Sunday
whose series number is ABCDEF to be 0
Note: Temperature rating: -40
Humidity rating: 0%~100
Current rating
H. TIMING
"SEG TIMING" adjust the device time, set the time of device power on/off
Command line input format: SEG TIMING 【ADDRES
【ADDRESS】: the series number of connec
n Figure 3-6-h:
【 OPTION】 Description
CHECK Adjust the device time
NO Set the time of each individual output
♦ Adjust the time:
SET TIMING 【ADDRESS】CHECK=091231042150
hour-minute, each secti
Week refe nce table
week
Co d 01 02 03 04 05 06 00
mman
line
♦ The time setting of output
22
Command line input format: SET TIMING 【ADDRESS】 1 Y ON=0912301456
1：the outlet No.
NPM User Manual
23
Y：daily timing repeat , Y means repeat, N means non-repeat
ON：the status of switch on/off, ON means power on, OFF means power off
=0912301456：the time of power on/off, format: year-month-day-hours-minute, each section with 2 digit, 24-hour
clear the setting information
ONINTERVAABCDEF TIME=1 Set the interval of device whose series number is ABCDEF
d.
.
E 【ADDRESS】【OPTION】
【OPTION】as detailed in
Figure 3-6-j the description tabl OPTION
【O
clock.
Note: "NULL" can
I) ONINTERVAL
"SET ONINTERVAL" set the interval of the device sequential power on
Command line input format: SET ONINTERVAL 【ADDRESS】【OPTION】
For instance: SET
to be 1 secon
J) DEVICE
"SET DEVICE" to change the device name, output name and serial number
Command line input format: SET DEVIC
figure 3-6-j
e of DEVICE
PTION】 Description
NAME Change the device name
ADDRESS Change the device serial number.
NO Change the name of each outlet
Note: the length of device name can not exceed 20 bytes.
e required if there is a blank in the name.
【
DD DEVICE 2=ABCDEF：the series number of new added device 2 is ABCDEF
.
: REMOVE DEVICE ABCDEF: Delete the device whose series number is ABCDEF
The device series number only use six digits.
The length of output name can reach 35 byte.
The " " ar
7) ADD
"ADD" is the command line of adding device,
Command line input format: ADD DEVICE 【NO.】=
NO.】: the device rank number can be used here, one rank number at a time.
For instance: A
8) REMOVE
"REMOVE" command line can be used to delete the connected device
Command line input format: REMOVE DEVICE 【 ADDRESS】
For instance
NPM User Manual
24
n, TELNET configuration, SNMP configuration, voice alarm setting, e-mail alarm
lid after system reboot
automatically when
em, the IE browser interface and the TELNET interface will restart with the system.
d password. Terminal user can input the command in the
and line console is the same with SSH command line console, details please
r .
ices at one
devices can be connected at most to one master, please see details as below:
veral Slaves, M/S indicator on is the Master while off is Slave, make sure the device
Press RESET button for 12 seconds (the interval of RUN light is 2 seconds), setting success when
Press RESET button for 6 seconds (the interval of RUN light is 2 seconds), setting success when M/S
f NPM Address No., check the setting success or not through reading the device status of
9) RESET
"RESET" command line can be used to restore factory seting, e.g device name, output port name, HTTP
configuration, SSH configuratio
setting and user management.
Note: it will be va
10) RESTART
"RESTART" command line can be used to restart the system, the SSH interface will be closed
restart syst
11) QUIT
"QUIT" to close the SSH system.
2.4. TELNET command line console access
The application of Telnet provides the user with the ability of remotely login and controlling conveniently,
start the conversation by inputting the user name an
telnet program to control and get better response,
The operation method of comm
efer to the SSH instruction
3. Device Daisy-chain
The device support daisy-chain (see hardware user manual), user can monitor and control multiple dev
time conveniently, and 10
3.1. Hardware setting
Firstly set up one Master and se
are connected in the right way.
Master setting:
M/S light on.
Slave setting:
light off.
3.2. Software setting
There are three ways to set the daisy-chain by software, please details as below:
A. Log on to IE(Internet Explorer) browser access interface, open the "Device Configuration" and input the device
series number in the frame o
"Device Control" interface
B. Log on to SSH command line console access, command line of "Add Device" can be used to daisy-chain device
NPM User Manual
25
ding device series, check the setting success or not through reading the device status of
device series number, check the setting success or not through reading the device
ber
e the new added device.
e original default values please refer to the 4th page of IE browser, the method
tly with network cable, namely network direct connection, rotate "OUTLET
UTLET NO.2 for 30 seconds (the interval of RUN light is 2 seconds), the digital tube will
D ect after the network disconnected.
hrough "Device Configuration" interface, make sure the device series number
ingle device
device to be Master, others to be Slaves;
ord can be used only once,
t be affected when restore to the original factory setting.
nd function well;
e sure the pop and smtp server was filled in correctly and accordant with server of e-mail sender, the
and add the correspon
"STATUS" interface
C. Log on to TELNET command line console access, command line of "Add Device" can be used to daisy-chain
devices and add corresponding
status of "STATUS" interface.
Note: A. The daisy-chain device hold the unique hardware series num
B. The name can not be repeat when nam
IV. Restore the network configuration
Restore the network configuration of hardware, restore IP address, sub-net mask, default gateway, DNS setting, SSH,
Telnet, HTTP to factory settings, for th
of restoring by network are as below:
A. Connected the device and PC direc
NO.1" knob on the front panel to “U”
B. Set up the device as Mater (the Slaves can not be restored)
C. Press knob of "O
display the RES IP;
. PC interface will automatically conn
4. Frequently Asked Questions
1. Q: User can not monitor the device information after logging on to the administrator interface.
A: 1, Check the device series number t
is exactly the same with the hardware;
2, Check whether the hardware device is the Master or not, the Slaves can not be monitored when s
connected to network, multiple devices daisy-chain, set up one
2. Q: Forget the login IP address、user name or password?
A: Press the knob of "OUTLET NO.2 for 30 seconds to restore it to factory setting, when restore complete the IP will
be: 192.168.1.163; User name is clever; password is clever, these user name and passw
other user administration will no
3. Q: E-mail delivery failure?
A: 1. Check and make sure the network are connected a
2. Check whether the DNS setting is successful or not;
3. Check and mak
smtp port is right
NPM User Manual
26
4. Ensure all the information filled in frame is accurate.
