Nurse Call Systems Spares Catalogue€¦ · Nurse Call Systems Spares Catalogue. ... Single Blue 46729 – pcb module only . Single Red 46734 ... •LED Torch Facility

Nurse Call Systems Spares Catalogue

Component Parts

Front Plate Switch Assemblies: Part Number(s) Emergency Switch Assembly 33806 + 36133 + 36183 + 36191 + 37101 Reset Switch Assembly 36192 Hand Unit Data Socket Assembly 36193 Nurse Presence Switch Assembly 36194 Nurse Call Push Switch Assembly 36195 Tone Hi/Lo Switch Assembly 36197

MK6 Hand Unit Components: Part Number(s)MK6 Hand Unit Cable with linen clip & plug 42942

MK5 Hand Unit Components: Part Number(s) MK5 Handset Bracket 37103 Rear Rubber Foot (small) with adhesive 36544B Rear Rubber Foot (large) with adhesive 36545B Replacement Lead – 2 metres c/w connectors 42901B & linen clip Top Moulding c/w overlay & rubber feet 42908 Bottom Moulding c/w screws & rubber feet 42910B Rear Cover c/w screws 42911B Printed Circuit Board 46793 Patient User Instruction Leaflet 90123

Bedhead Modules: Part Number(s) Codem I Decoder (SM888) 46725 Speech Decoder (SM889) 46726 I2C Driver (SM844) 46747 Stereo Headphone socket (SM849) 46748 Speech Decoder + IR (SM852) 46751 Micro Bedhead Backplane (No I/0) (SS861) 46760 Bedhead Electronics (SM865) 46764 Codem I Decoder (SM838) 46797 Bedhead Backplane (SS860) 46798

Bedlight Relay Fittings: Part Number(s) Bedlight Relay Housing Mounting PinClips 36123 Bedlight Relay (Std) (SM867) 46706 Bedlight Relay (C/O) (SM868) 46707 Bedlight Relay (Std) Plastic Housing 40011 Bedlight Relay (C/O) Plastic Housing 40012

Indicator Modules: Part Number(s) 8 Zone Indicator Backplane (SM828) 42816 8 Zone Indicator Module (SM829) 46817 Datastation I/F Node (SM874) 46737 LCD Indicator Module (SM880) 46768 Touchscreen Display Module (SM933) 46788

Spares Catalogue Issue : 5f (11/14) Page 2 of 62

Component Parts

Ancillary Modules: Part Number(s) Micro Node Backplate (SS875) 46743 Micro Node I01 (sm876) 46744 RDR Interface Module (SM848) 46746 Ancillary I/O Electronics (SM862) 46761 Ancillary I/O Electronics + tone (SM8630 46762 Micro Node IO2 (SM835 + SM819) 46781

Pull Cord Assemblies: Part Number(s) Orange Cord 36447 Pull 36372 Connector 36175

Overdoor Unit Lamp Assemblies: Part Number(s) Single White 46728 – pcb module only Single Blue 46729 – pcb module only Single Red 46734 – pcb module only Single Green 46749 – pcb module only Single Amber (systems prior to 06/03) 46757 – pcb module only Single Orange (systems post 06/03) 46778 – pcb module only

Power Supplies: Part Number(s) 3A SMPSU 75046 6A SMPSU 75059 6A SMPSU Charger Module 79012 10A SMPSU Charger Module 79013 7AH Battery 42811 12AH Battery 42856 17AH Battery 42815

Power Supply Unit Modules: Part Number(s) CNX/Termination Module (SS871) 46703 Network Link Node (SM837) 46708 (Older – non network speech)

46799 (Newer – network speech) System Back-up Node (SM866) 46750 Network Speech Backplane (SM817) 46783 Network Speech Module (SM818) 46784

Leads: Part Number(s) RS232 Null Modem Lead 42263 Datastation I/F Lead 42512 CAT5 Patch Lead 42904

Line Terminators: Part Number(s) CAT5 Terminator Module 46723 Codem 1 Terminator Module 75614


Component Parts

Repeater Unit Modules: Part Number(s) Line Repeater (SM864) 46763

Relay Modules: Part Number(s) Twin 5V Relay Module (SS762) 46735

Attack Alarm Batteries: Part Number(s) Badge Battery (Type CR2430) 74621 Pendant Battery (Type CR 2032) 74626

To assist with ordering complete units an identification label can be found on the inside of the equipment front plate.

For further assistance contact Static Systems’ Technical Services Department on +44 (0) 1902 895551.


Component Parts

Recommended Spares List – Typical 30 Bed Ward

Product Description Part Number Recommended Quantity

Emergency Switch Assembly *36133, 36183, 36191 3 Reset Switch Assembly *36192 3 Hand Unit Data Socket Assembly *36193 2 Headphones 42043 4 6A Power Supply Unit 75059 1 Patient Hand Unit 75709B 4 Dummy Jack Plug 75717 2 Overdoor Lamp Unit *75776B 2 Pull Cord Unit *75738 2

Items marked with an * have proven to be particularly reliable in operation and do not require changing often.


Recommended Spares List

Hand Unit Warranty

MK6 hand units are supplied with a 5 year warranty, and all other hand units are supplied with a 12 month warranty.

Faulty hand units returned within the warranty period will be replaced with a new unit on a no charge basis.

A new hand unit (with warranty) will be provided for all faulty units returned under the Service Replacement Scheme.

Hand units returned ‘damaged’ will be replaced at the standard unit cost.

Where a specific request is made to replace a MK4 or MK5 unit with a MK6 unit the standard unit price will be charged.

Note: Where a MK5 unit is replaced with a MK6 unit it will be necessary to also change the mounting bracket. The appropriate bracket is automatically supplied with the hand unit. The amount charged does not include for fitting.

Spares Ordering

Items of equipment should be ordered direct from Static Systems’ Spares Department on:

Tel: +44 (0) 1902 891035 Fax:: +44 (0) 1902 891083

Postage and Packaging

Replacement hand units will be posted using a standard carrier service for which there is no additional charge. A next working day service for a 9.30am delivery can be provided at an extra cost of £26.50

On-site repair by customer

MK5 hand unit components and cables are available for repair by qualified hospital personnel.

Only the cable on MK6 hand units can be purchased separately for on-site repair by qualified hospital personnel.


Hand Unit Warranty

Codemlon Staff Hand Unit - speech (MK6)

Part Code: 75824B

Facilities: • Microphone• Speaker• LED Torch Facility• Patented Quick Release Plug• 2 Metre Flexible Cable

I.P. Rating: IP64-Splashproof. To assist in the fight against bacteria such as MRSA, the unit can be wiped clean with a disinfecting wipe.

Note: This hand unit is for use with nurse base speech indicators and speech datastations.


Staff Hand Units

Codemlon Mini Patient Hand Unit - lighting

Part Code: 75801B

Facilities: • Reassurance LED• Patient Call Push• Lighting Controls• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable

I.P. Rating: IP67-Waterproof. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with a disinfecting wipe.

Lighting Control: The unit includes on/off functionality for the control of bed lighting. The bedlight control buttons can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.

Maintenance: The unit has been purpose designed to allow easy replacement of the cable.

Codemlon Patient Hand Unit - speech, entertainment & lighting

Part Code: 75802B

Facilities: • Microphone• Speaker• Reassurance LED• Patient Call Push• Entertainment Channel Selection• Volume Control• Lighting Controls• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable


Lighting Control: The hand unit includes on/off functionality for the control of bed lighting. The bedlight control buttons can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.



Patient Hand Units

Codemlon Patient Hand Unit - entertainment & lighting

Part Code: 75803B

Facilities: • Reassurance LED• Patient Call Push• Channel Selection• Volume Control• Lighting Controls• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable




Codemlon Patient Hand Unit - speech, entertainment, lighting & catering

Part Code: 75819B

Facilities: • Microphone• Speaker• Reassurance LED• Patient Call Push• Entertainment Channel Selection• Volume Control• Lighting Controls• Catering Call Push• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable





Patient Hand Units

Codemlon Patient Hand Unit - entertainment, lighting & catering

Part Code: 75820B

Facilities: • Reassurance LED• Patient Call Push• Entertainment Channel Selection• Volume Control• Lighting Controls• Catering Call Push• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable




Codemlon Mini Patient Hand Unit - lighting & catering

Part Code: 75821B

Facilities: • Reassurance LED• Patient Call Push• Lighting Control• Catering Call Push• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable


Lighting Control: The unit includes on/off functionality for the control of bed lighting. The bedlight control button can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.



Patient Hand Units

Codemlon Patient Hand Unit - lighting & catering

Part Code: 75822B

Facilities: • Reassurance LED• Patient Call Push• Lighting Controls• Catering Call Push• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable




Codemlon Patient Hand Unit - speech & lighting

Part Code: 75823B

Facilities: • Microphone• Speaker• Reassurance LED• Patient Call Push• Lighting Controls• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable





Patient Hand Units

Codemlon Patient Hand Unit - TV entertainment & lighting

Part Code: 75831B

Facilities: • Reassurance LED• Patient Call Push• Entertainment Channel Selection• Volume Control• Lighting Control• Programme Scheduling/Information• Entertainment "on/off"• TV/Radio Selection• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable


Lighting Control: The unit includes on/off functionality for the control of bed lighting. The bedlight control button can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.



Patient Hand Units

Codemlon Patient Hand Unit - speech, TV entertainment & lighting

Part Code: 75832B

Facilities: • Microphone• Speaker• Reassurance LED• Patient Call Push• Entertainment Channel Selection• Volume Control• Lighting Control• Programme Scheduling/Information• Entertainment "on/off"• TV/Radio Selection• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable


Lighting Control: The hand unit includes on/off functionality for the control of bed lighting. The bedlight control button can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.



Patient Hand Units

Codemlon Patient Hand Unit - TV entertainment, lighting & catering

Part Code: 75834B

Facilities: • Reassurance LED• Patient Call Push• Entertainment Channel Selection• Volume Control• Lighting Control• Catering Call Push• Programme Scheduling/Information• TV/Radio Selection• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable





Patient Hand Units

Codemlon Patient Hand Unit - speech, TV entertainment, lighting & catering

Part Code: 75835B

Facilities: • Microphone• Speaker• Reassurance LED• Patient Call Push• Entertainment Channel Selection• Volume Control• Lighting Control• Catering Call Push• Programme Scheduling/Information• TV/Radio Selection• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable





Patient Hand Units

Codemlon Patient Hand Unit (MK5)

Part Code: 75727B

Facilities: • Reassurance LED• Patient Call Push• Channel Selection• Volume Control• Lighting Controls• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable• Patient User Instructions

I.P. Rating IPX7. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with a disinfecting wipe.

Lighting Control: The hand unit includes on/off buttons for the control of two separate lighting units. The buttons can also be programmed to allow variable dimming where appropriate electronics are provided in the light unit.

Maintenance: The hand unit has been purpose designed to be fully maintainable on site.


Patient Hand Units


Part Code: 75784B

Facilities: • Reassurance LED• Patient Call Push• Channel Selection• Volume Control• Lighting Controls• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable

I.P. Rating: IPX7. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with a disinfecting wipe.

Lighting Control: The unit includes and on/off button for the control of a lighting unit. The button can also be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.



Part Code: 75794B

Facilities: • Reassurance LED• Patient Call Push• Channel Selection• Volume Control• Lighting Controls• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable• Patient User Instructions


Lighting Control: The hand unit includes an on/off button for the control of a lighting unit. The button can also be programmed to allow variable dimming where appropriate electronic are provided in the lighting unit.



Patient Hand Units

Codemlon Mini Patient Hand Unit (MK4)

Part Code: 75719B

Facilities: • Reassurance LED• Patient Call Push• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable

I.P. Rating: IPX7. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with an alcohol wipe.

Codemlon Mini Patient Hand Unit with lighting control button (MK4)

Part Code: 75737B

Facilities: • Reassurance LED• Patient Call Push• Lighting Control• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable


Lighting Control: The hand unit includes an off/off button for the control of a lighting unit. The bedlight control button can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.


Patient Hand Units

Codemlon Patient Hand Unit – speech (MK4)

Part Code: 75715B

Facilities: • Microphone• Speaker• Reassurance LED• Patient Call Push• Lighting Control• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable

I.P. Rating: IP64-Splashproof (To assist in the fight against bacteria such as MRSA, the unit can be wiped clean with a disinfecting wipe).


Codemlon Patient Hand Unit - speech with entertainment (MK4)

Part Code: 75754B

Facilities: • Microphone• Speaker• Reassurance LED• Patient Call Push• Entertainment Channel Selection• Volume Control• Lighting Control• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable




Patient Hand Units

Codemlon Staff Hand Unit - speech (MK4)

Part Code: 75773B

Facilities: • Microphone• Speaker• Patented Quick Release Plug• 2 Metre Flexible Cable


Note: This hand unit is for use with nurse base speech indicators and speech datastations.


Staff Hand Units

Codemlon Dummy Jack Plug

Part Code: 75800B

Note: This device is used to plug into the hand unit socket to prevent the nurse call system going into alarm when a patient hand unit is removed.

Hand Unit Mounting Bracket

Part Code: 37103B

Note: This bracket is for use with Codem II and Codemlon MKV Hand Units. (Supplied as a separate item for fixing by others.)

Hand Unit Mounting Bracket

Part Code: 37140B

Note: This bracket is for use with Codemlon MK6 Hand Units. (Supplied as a separate item for fixing by others.)


Hand Units – Miscellaneous

Codemlon Bedhead Unit without entertainment

Part Code: 75705B

Facilities: • Panel Mounted Spur Fuse rated at 3 Amps forBedlight

• 5 Amp 3 Position Switch for Dim/Off/BrightOperation

• Twin Switched Socket Outlet (Crabtree)• Hand Unit Mounting Bracket• Reset Push• Emergency Pull• Hand Unit Socket

Plate Size: 174mm x 324mm (including Mains Section)

Box Size: Flush – 300mm x 150mm x 50mm (Part No. 39130) Surface – 325mm x 175mm x 50mm (Part No. 39342)

Material: 16swg Zintec Steel

Finish: Powder Coated Papyrus White RAL 9018

Note: This unit includes a jack socket to allow for the future addition of Radio/TV audio facilities. Additional wiring and modules would be required.


Bedhead Units

Codemlon Bedhead Unit with Codem entertainment

Part Code: 75729B



• Twin Switched Socket Outlet (Crabtree)• Hand Unit Mounting Bracket• Headphone Jack Socket• Reset Push• Emergency Pull• Hand Unit Socket• Codem Radio/TV Audio Module


Box Size: Flush - 300mm x 150xmm x 50mm (Part No. 39130)

Surface – 325mm x 175mm x 50mm (Part No. 39342)




Bedhead Units

Codemlon Bedhead Unit with speech and Codem entertainment

Part Code: 75764B



• Twin Switched Socket Outlet (Crabtree)• Microphone• Speaker• Hand Unit Mounting Bracket• Headphone Jack Socket• Reset Push• Emergency Pull• Hand Unit Socket• Two-way Speech Module• Codem Radio/TV Audio Module






Bedhead Units

Codemlon Bedhead Unit with speech

Part Code: 75765B



• Twin Switched Socket Outlet (Crabtree)• Microphone• Speaker• Hand Unit Mounting Bracket• Reset Push• Emergency Pull• Hand Unit Socket• Two-way Speech Module





Note: This unit includes a jack socket to allow for the future addition of Radio/TV audio facilities. Additional wiring and modules would be required.

Bedlight Relay with bracket

Part Code: 42700

Note: This unit must be located within 500mm of the nurse call panel.


Bedhead Units

Codemlon Pull Cord Unit with reassurance

Part Code: 75738B

Facilities: • Reassurance LED• 2 Metre Cord (orange)• Pull Handle (orange)

Plate Size: 86mm x 86mm

Box Size: Flush (Ceiling Mounted) – BS 1 Gang (Part No. 39100) Surface (Ceiling Mounted) – 96mm x 85mm x 30mm (Part No. 39322)

Material: ABS Plastic

Finish: Fine spark textured Neutral Grey

Codemlon Pull Cord Unit with reassurance

Part Code: 75795B

Facilities: • Reassurance LED• 3 Metre Cord (red)• 2 Pull Handles (red)


Box Size: Flush – BS 1 Gang (Part No. 39100) Surface – 96mm x 85mm x 30mm (Part No. 39322)


Finish: Fine spark textured Neutral Grey

Note: This unit is designed to comply with BS 8300 : 2001 (Section 12.4.10) for use in public access WCs. It is supplied with 3 metres of cord for easy adjustment on site.


Pull Cords

Codemlon Call Push Unit

Part Code: 75722B

Facilities: • Call Push





Codemlon Call/Reassurance Unit

Part Code: 75723B

Facilities: • Call Push





Codemlon Call/Reset/Emergency Unit

Part Code: 75721B

Facilities: • Reset Push• Emergency Pull

Call Push


Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39105) Surface – 175mm x 100mm x 50mm (Part No. 39305B)




Ancillary Call Units

Codemlon Hand Unit Socket

Part Code: 75731B

Facilities: • Hand Unit Socket







Codemlon Emergency/Reassurance Unit

Part Code: 75739B

Facilities: • Reassurance LED• Emergency Pull





Codemlon Reset/Emergency/Socket Unit

Part Code: 75740B

Facilities: • Reset Push• Emergency Pull• Hand Unit Socket





Codemlon Reset/Socket Unit

Part Code: 75741B

Facilities: • Reset Push• Hand Unit Socket


Box Size: Flush – 150 mm x 75mm x 50mm (Part No. 39125) Surface – 168 mm x 93mm x 50mm (Part No. 39339)



Codemlon Call/Reset Unit



Part Code: 75742B

Facilities: • Reset Push• Call Push





Codemlon Reset/Emergency Unit

Part Code: 75743B



Box Size: Flush – 150 mm x 75 mm x 50mm (Part No. 39125) Surface – 168 mm x 93 mm x 50mm (Part No. 39339)



Codemlon Reset Unit

Part Code: 75744B

Facilities: • Reset Push







Codemlon Call/Reset/Emergency Unit

Part Code: 75745B

Facilities: • Reset Push• Emergency Pull• Call Push







Codemlon Reset Unit

Part Code: 75710B

Facilities: • Reset Push


Box Size: Flush – 2 Gang (Part No. 39101) Surface – 2 Gang (Part No. 39301B)



Codemlon Reset/Emergency Unit

Part Code: 75711B






Codemlon Reset/Socket Unit

Part Code: 75712B

Facilities: • Reset Push• Hand Unit Socket






Ancillary Call Units (without nodes)

Codemlon Reset/Emergency/Socket Unit

Part Code: 75713B

Facilities: • Reset Push• Emergency Pull• Hand Unit Socket





Codemlon Call/Reset Unit

Part Code: 75720B

Facilities: • Reset Push• Call Push





Codemlon Emergency/Reassurance Unit

Part Code: 75730B

Facilities: • Reassurance LED• Emergency Pull






Ancillary Call Units (without nodes)

Codemlon LED Indicator Panel

Part Code: 75701

Facilities: • 8 no. zone indicators (red)• 8 no. ‘write-on’ zone labels• Power indicator (green)• Fault indicator (yellow)• Mute indicator (red)• Concealed tone sounder• Wipe-clean front plate

Controls: • Mute button for day/night operation



Box Material: 16swg Zintec Steel

Box Finish: Powder Coated Papyrus White RAL 9018

Codemlon LCD Indicator with tones

Part Code: 75755B

Facilities: • Blue, cold cathode backlit LCD indicates calland specific location

• Four programmable buttons: tone on/off, textsmall/large, user defined (2no.)






Staff Indicators

Codemlon LCD Touch Screen Indicator – non-speech

Part Code: 75760B

Facilities: • Mono screen (120mm x 92mm)• Large text display ~ top three priority calls

indicated at any one time, with touch screenaccess to additional calls

• Automatic time stamping of calls• Time and date display• Integral tone sounder

Controls: Touch screen





Codemlon LCD Touch Screen Indicator - speech

Part Code: 75761B

Facilities: • Mono screen (120mm x 92mm)• Large text display ~ top three priority calls

indicated at any one time, with touch screenaccess to additional calls

• Automatic time stamping of calls• Speech to any active call (via hand unit)• Call ‘hold’• Time and date display• Integral tone sounder

Controls: Touch screen






Staff Indicators

Codemlon Nurse Call DataStation – splashproof, non-speech

Part Code: 42381

Features: • 17” TFT XGA Colour LCD incorporating touch-screen control

• CD-Rom Drive• Internal Tone Sounder

Facilities: • Graphical Nurse Call Indication including: calltype, date time stamp, elapsed time

• Input Patient Details• Call Logging• Engineering Event Log• Fault Indication

Depth: 83.5mm

Weight: 6kg

Resolution: 1024 x 768

The Nurse Call DataStation is supplied as a free-standing self-contained unit with the standard system of operation tailored to specific requirements. All functions of the unit are password protected. It is supplied with an external power supply unit.

Codemlon Nurse Call DataStation – splashproof, speech

Part Code: DSTN/SPSP

Features: • 17” TFT XGA Colour LCD incorporating touch-screen control

• CD-Rom Drive• Internal Tone Sounder

Facilities: • Two-way Speech• Graphical Nurse Call Indication including: call

type, date time stamp, elapsed time• Input Patient Details• Call Logging• Engineering Event Log• Fault Indication• Public Address

Depth: 83.5mm

Weight: 6kg

Resolution: 1024 x 768

The Nurse Call DataStation is supplied as a free-standing self-contained unit with the standard system of operation tailored to specific requirements. All functions of the unit are password protected. It is supplied with an external power supply unit.


Staff Indicators

Codemlon Nurse Call Data Logger

Part Code: 42367

Comprising: • PC Base Unit• 17" TFT Colour Monitor• Keyboard• Mouse• Pre-loaded software allowing 'calls' and 'faults'

on the Codemlon Network to be logged.

Note: The appearance of the unit may vary from that shown.

Codemlon Central Logging Software Package

Part Code: CLOG

For use with the Codemlon DataStation, the Central Logging Software Package allows information from ward based DataStations to be displayed at a central location.

Codemlon Nurse Presence Software Package

Part Code: NP

For use with the Codemlon DataStation, the Nurse Presence Software Package allows the location of staff to be indicated and logged.

Codemlon Bed Transfer Software Package

Part Code: TX

For use with the Codemlon DataStation, the Bed Transfer Software Package allows nursing staff to divert calls from select beds or groups of beds to an indicator situated in an adjacent ward.

Codemlon Network Interface Lead

Part Code: 42577

Features: • 2 metre length cable• 9 Pin 'D' Type Connector

Note: This lead is for use with the Codemlon DataLogger and VoIP Handset Manager.


Staff Indicators

Codemlon Overdoor Unit – 1 Way (white LED)

Part Code: 75724B




Finish: Fine Spark Textured Neutral Grey

Codemlon Overdoor Unit – 1 Way (blue LED)

Part Code: 75725B





Codemlon Overdoor Unit – 1 Way (red LED)

Part Code: 75726B






Overdoor Lights

Codemlon Overdoor Unit – 1 Way (amber LED)

Part Code: 75734B





Codemlon Overdoor Unit – nurse presence (green LED)

Part Code: 75752B





Codemlon Overdoor Unit – 1 Way (orange LED)

Part Code: 75776B




Finish: Fine spark textured, Neutral Grey


Overdoor Lights

Codemlon Overdoor Unit – 2 Way

Part Code: 75772B

Facilities: • One Way LED (amber)• One Way LED (green)


Box Size: Flush - BS 2 Gang (Part No. 39101) Surface – 146mm x 86mm x 40mm (Part No. 39301)




Part Code: 75779B

Facilities: • Two Way LEDs (orange)






Part Code: 75780B

Facilities: • One Way LED (orange)• One Way LED (green)






Overdoor Lights

Codemlon Lamp/Tone Unit

Part Code: 75746B

Facilities: • One Way LED (orange)• Tone Loudspeaker Module• Protective Grill





Codemlon Lamp/Tone/Switch Unit

Part Code: 75747B

Facilities: • One Way LED (orange)• Tone Loudspeaker Module• Protective Grill• Tone Push (high/low)





Codemlon Tone Sounder Unit

Part Code: 75750B

Facilities: • Tone Loudspeaker Module• Protective Grill






Ancillary Tone & Indicator Units

Codemlon C.D.C. Lamp Indicator – 1 Way (red LED)

Part Code: 75736B





Codemlon C.D.C. Lamp Indicator - 230 Volt

Part Code: 75768B

Facilities: • One Way LED (red)• Transformer





Note: This unit requires a 230V ac mains supply.

Codemlon Toilet Call Lamp/Tone Unit

Part Code: 75817B







Ancillary Tone & Indicator Units

Codemlon Tone Sounder Unit

Part Code: 75751B

Facilities: • Tone Loudspeaker Module• Protective Grill





Codemlon Lamp/Tone/Switch Unit

Part Code: 75781B

Facilities: • One Way LED (orange)• Tone Loudspeaker Module• Protective Grill• Tone Push (high/low)






Ancillary Tone & Indicator Units (without nodes)

Codemlon Lamp/Tone Unit

Part Code: 75782B







Ancillary Tone & Indicator Units (without nodes)

Codemlon Power Supply Unit complete with back-up node

Part Code: LPSU

Facilities: • RJ45 Data Socket for connection of lap topcomputer

• Back-up Node to assist in quick faultrectification

Output: 24 Volts dc Switchmode Power Supply Unit

Plate Size: 384 mm x 344mm

Box Size: Surface – 385 mm x 345 mm x 75mm (Part No. 42504)


Finish: Powder Coated White RAL 9010, 25% gloss (matt)


Codemlon Power Supply Unit

Part Code: LPSU3A

Output: 24 Volts dc Switchmode Power Supply Unit (3 Amp)

Plate Size: 384 mm x 344mm

Box Size: Surface – 385 mm x 345 mm x 75mm (Part No. 42504)





Power Supply Units

Codemlon Network Device Power Supply Unit

Part Code: 75728B

Output: 12 Volts dc Switchmode Power Supply Unit


Box Size: Flush - 150mm x 150mm x 50mm (Part No. 39123)

Surface – 175mm x 175mm x 50mm (Part No. 39307B)




Yuasa 12 Volt, 12 Ahr Sealed Lead Acid Cells

Part Code: 42856

Note: These cells are provided for use with Codemlon battery/charger units Part No. LPSU, 75790 and 75796, and also for use with Series 600 and Series 900 fire alarm panels.

Codemlon Battery Charger Unit

Part Code: 75790

Output: 24 Volt dc, 6 amp fully fault monitored charger module

Box Size: Surface – 410mm x 448mm x 106mm

Material: Folded steel


Note: This unit requires two sealed lead acid 12 volt cells, detailed separately. A 230V ac mains supply is required.


Power Supply Units

Codemlon Combined Battery, Charger and Power Control Unit

Part Code: 75796

Facilities: • RJ45 Data Socket for connection of lap topcomputer

• Back-up Node to assist in quick faultrectification

Output: 24 Volt dc, 6 amp fully fault monitored charger module

Box Size: Surface – 560mm x 448mm x 106mm

Material: Folded steel


Note: This unit requires two sealed lead acid 12 volt cells, detailed separately. A 230V ac mains supply is required.

Codemlon Uninterruptible Power Supply with cells

Part Code: 76627

Note: This unit is sized to support the DataStation for a period of 30 minutes in the event of a mains failure.

Fusion-IP Power Supply/Charger Unit

Part Code: 74837

Output: 28 Volt DC Switchmode Power Supply Unit (3.5 Amps + 200mA charger current)

Efficiency: 92%

Protection: Short circuit - trip and restart

Box Size: Surface - 300mm x 260mm x 95mm

Material: 1.5mm Zintec Steel


Note: This unit requires a 90 - 264V AC mains supply, 47 - 63Hz. It can connect to a Local Area Network (LAN).


Power Supply Units

Codemlon Signal Repeater Unit

Part Code: 75716B





Note: This device is inserted into the Cat 5 Cable at 700 metres to boost/condition the signal.

Codemlon Input/Output Interface Unit

Part Code: IFU

Facilities: • Fitted with appropriate I/O Modules to suit thespecific requirements of the project

Box Size: Surface– 300mm x 225mm x 50mm (Part No. 39148)



Codemlon Datastation Interface Unit - speech

Part Code: 75756B


Box Size: Flush – 150mm x 150mm x 50 mm (Part No. 39107) Surface – 175mm x 175mm x 50mm (Part No. 39307)



Note: This unit interfaces a DataStation into the Codemlon system. The DataStation must be situated within 2 metres of the Interface Unit.


Repeater & Interface Units

Codemlon Pager Interface Unit

Part Code: 75757B





Note: This unit interfaces 3rd party paging equipment into the Codemlon system. The unit provides a standard RS232 format data output. This unit can also be used to connect a printer into the Codemlon system.

Codemlon Relay Interface Unit

Part Code: 75758B

Facilities: • 2 No. 2 change over contracts rated at 5 volts• 1 Amp resistive 30V dc max.


Box Size: Flush – 2 gang (Part No. 39101) Surface – 2 gang (Part No. 39301)



Codemlon Datastation Interface Unit - non-speech

Part Code: 75759B





Note: This unit interfaces a DataStation into the Codemlon system. The DataStation must be situated within 2 metres of the Interface Unit.



Codemlon C.D.C. Interface Unit - 230 volt

Part Code: 75775B



Material: 16swg Stainless Steel


Note: This unit is used to interface a 230V input into the Codemlon-Call System.

Codemlon Datalogger Interface Unit

Part Code: 75778B


Box Size: Flush - 150mm x 150mm x 50mm (Part No. 39107) Surface – 175mm x 175mm x 50mm (Part No. 39307)



Note: This unit interfaces a DataLogger into the Codemlon-Call system. The DataLogger must be situated within 2 metres of the Interface Unit.

Codemlon Network Interface Unit

Part Code: 75791B







Headphones

Part Code: 42043

Note: This device is supplied with a 2 metre lead fitted with a 3.5 mm, 3 pole jack plug.

Ceiling Speaker

Part Code: 75119

Facilities: • Loudspeaker rated at 8 ohms

Mounting: Flush (Ceiling)

Material: Plastic

Finish: White

Codem Isolator Unit

Part Code: 75610


Box Size: Surface – 175mm x 175mm x 35mm (Part No. 39323)

Material: Plate - 16swg Stainless Steel Box – Galvanised Mild Steel

Finish: Plate – Satin Lacquered Box – Textured Brown

Note: For added integrity this unit isolates the entertainment system within a ward. The unit gives twin outputs, each capable of supporting up to 30 beds and/or loudspeaker controllers. The unit requires a 230V ac mains supply.

Codem Repeater Unit

Part Code: 75611


Box Size: 175mm x 175mm x 35mm – surface (Part No. 39323)

Material: Plate - 16swg Stainless Steel Box – Galvanised Mild Steel

Finish: Plate – Satin Lacquered Box – Textured Brown

Note: Inserted into the dataline at 300 metres to boost/condition the entertainment signal. This unit requires a 230V ac mains supply.


Patient Entertainment

Codem Line Terminator

Part Code: 75614

Note: This component is required at the end of each ‘run’ of data cable and is installed within the last bedhead unit/loudspeaker controller unit.

Codem Loudspeaker Control Unit

Part Code: 75774B

Facilities: • Control of 1 or 2 Loudspeakers (output rated at2 watts total)

• Channel Selection• Volume Control• On/off Switch





Note: This unit requires a 24V dc mains supply.



Codem Central Rack

Part Code: 75798

Features: • High quality sound

• Channel frequency display

• Touch screen tuning

• Volume control

• Local channel monitoring

• Non-volatile memory

• Modular assembly

• Phase locked loop synthesised receivers

Standard Facilities:

11 no. FM Tuners 2 no. Auxiliary Inputs

Dimensions: 475mm (w) x 175mm (h) x 495mm (d)

Weight: 13.4kg

The CODEM Central Rack receives inputs from external aerial connections (or user accessible audio inputs) and converts them into high quality audio signals. The signals are then converted into digital form for transmission around the building. They are subsequently converted back into high quality audio signal and output at the bedhead. The unit is designed to receive and distribute FM and auxiliary input signals. AM tuners can be added at additional cost.

Note: This unit requires 240V ac mains supply and aerial feed of professional quality.



Codemlon LCD Patient Television

Part Code: 66010

Specification: • High resolution 8" TFT LCD with 16:9 aspectratio

• Anti-glare Screen Protector• High Impact Plastic Enclosure• On/off Switch• 2 no. Internal Loudspeakers• 3.5mm Jack Socket for Headphones• Kinetic Arm with 1.4 metre overall reach

Finish: TV Enclosure Front - Grey RAL 7015 TV Enclosure Back - Black RAL 9005 TV Arm - Powder Coated, Papyrus White RAL 9018

Note: The patient television is designed to operate on standard analogue TV signals. Typically any digital channels would be converted into analogue at the head-end of the TV distribution system. This unit is controlled via the nurse call patient hand unit.



Third Party Network Link

Part Code: GL

Note: This device is used to Interface between a Codemlon-Call System and third party equipment. It is housed within the Power Supply Unit.

Codemlon Network Link and Software

Part Code: NL

Note: This device is used to connect Codemlon-Call Systems to a Codemlon-Call Network. It is housed within the Power Supply Unit.


Site Networking

Infra-red Transmitter (ID badge)

Part Code: 74655

Dimensions: 79mm x 39mm x 7mm

Facilities: • Infra-red signalling• Light-weight ~ 24 grams (including battery)• Fail safe periodic transmission• Long-life Lithium battery ~ 18 months• Battery low signal indication• Self-adhesive label for user’s own photograph

& details

Note: The length of transmission is 3 seconds. This device includes a concealed button which can be programmed as an optional facility to summon staff assistance.

Infra-red Receiver

Part Code: 74614

Diameter: 170mm


Material: ABS and polycarbonate.

Note: This unit is supplied complete with a mounting bracket and Junction Box.


Automatic Nurse Presence

Codemlon Nurse Presence Unit

Part Code: 75762B

Facilities: • Presence Push






Manual Nurse Presence

Infra-red & Radio-frequency Transmitter (pendant)

Part Code: 74608

Facilities: • Infra-red signalling• Light-weight ~ 25 grams

(including battery)• Fail safe periodic transmission• Long-life Lithium battery ~

18 months• Battery low signal indication

Note: An alarm is activated by pushing the large green button. The length of transmission is 14 seconds.

Infra-red Receiver

Part Code: 74614

Diameter: 170mm




Radio-frequency Receiver

Part Code: 74615

Diameter: 170mm





Personnel Attack Alarm

Codemlon Mushroom Headed Panic Button

Part Code: 75786B

Facilities: • 40mm Momentary Push (red)



Surface - 100mm x 100mm x 50mm (Part No. 39302)

Material: 16 swg Zintec Steel


Note: This unit is a momentary switch which will latch the call onto the system and must be reset remotely.

Codemlon Mushroom Headed Panic Button

Part Code: 75787B

Facilities: • 40mm Auto-lock Push (red)



Surface - 100mm x 100mm x 50mm (Part No. 39302)

Material: 16 swg Zintec Steel


Note: This unit is a latching switch which will be programmed to set/reset the call.


Panic Alarm

Reed Switch

Part Code: 03527

Maximum DC Rating:

250 volts, 1.5 amps (resistive)

Size: 28mm (h) x 78mm (l) x 9mm (d)

Mounting: Surface

Note: This unit is supplied complete with a 70mm length of cable. It operates with Actuator Magnet Part No. 03528.

Actuator Magnet

Part Code: 03528

Size: 25mm (h) x 38mm (l) x 9mm (d)

Mounting: Surface

Note: This unit operates with Reed Switch Part No. 03527.

isc Codemlon BedBinder-i Software Package

Part Code: 75785

Features: • Windows based software program to assist insystem maintenance and testing.• Location Label Changing• Set Volume Tone Levels• View Project Information• System Interrogation• Set Clock• Print and save reports as ‘txt’ or Microsoft

‘excel’ files.

Comprising: • Software CD-Rom• Instruction Booklet• Codemlon Longate Serial Node• Longate to PC Lead• Longate to Codemlon System Lead

Note: A laptop computer with the specification given below is required to run the BedBinder-i software. A laptop computer is not included in our offer. The BedBinder-i software is supported by a technical help line.

Laptop Specification:

• One Serial Port• 500Mhz + 128Mb RAM• Windows 95/98/2000/XP


Miscellaneous

Issue No. 5f (11/14)

Documents

Nurse Call Systems Spares Catalogue€¦ · Nurse Call Systems Spares Catalogue. ... Single Blue 46729 – pcb module only . Single Red 46734 ... •LED Torch Facility