NUTS, BOLTS & SCREWS - Blies Bolts and Nuts.pdfNUTS, BOLTS & SCREWS Our aim is to make your fasten and fix it projects easier, hassle free with a dash of speed. We have a total solution

NUTS, BOLTS & SCREWS

Our aim is to make your fasten and fix it projects easier, hassle free with a dash of speed. We have a total solution that manages the supply of fasteners.

[email protected] Tel:+27 11 789 3388 CELL: +27 72 527 8169

+27 11 029 5338

http://www.eureka.co.za/index.php?option=com_virtuemart&page=shop.browse&category_id=14&Itemid=3





CHIPBOARD SCREWS

BITS (Screw driver)

Chipboard Screws Cut Screws Decking Screws


+27 11 029 5338

http://www.eureka.co.za/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=53&category_id=14&option=com_virtuemart&Itemid=3



BLIES CODE DESCRIPTION SIZES QUANTITIES BLEU001 CHIPB FULL THR YP 3.0x 13mm Q:100

BLEU002 CHIPB FULL THR ZP 4.0x 16mm Q:80

BLEU003 CHIPB SMTH SHK YP 4.0x 30mm Q:25



BLEU006 CHIPB FULL THR YP 3.5x 13mm Q:100






































CHIPBOARD SCREWS

[email protected] Tel:+27 11 789 3388 +27 11 029 5338





























CHIPBOARD SCREWS


• All cut screws are now square drives

• Better grip • No more stripped heads

Use a square screwdriver or a power drill. Ideal for joining metal to wood, fastening glued or clamped boards or soft woods.

• Cutting point for easy drive-ability and drills its own thread. Available in smooth shank for wood to wood and full thread for metal to wood application.

• Use a square screwdriver or a power drill. • Countersinking ribs for efficient countersinking. • Square head with easy grip preventing slipping • Available in lengths from 16mm to 120 mm. Thickness varies from 3mm

to 6.5mm.

Hints & Tips

• Use a power tool fitted with a positive bit to speed up work • When using a power tool, variable speed must be used with low torque. • Smooth shank is used for joining wood to wood. The smooth shank is

used to eliminate any gaps that may occur. • Full thread shank is ideal for metal or plate (e.g. hinges to wood) • Use a screw as thin as possible when screwing the edge of wood to

prevent cracking. • There are 4 sharp ribs under the head allowing for countersinking.


http://www.eureka.co.za/images/stories/cut_screw.png

Important when screwing onto the edge of wood or medium density fiber board panel where a long screw can add the needed reinforcement

Advantages • Cuts its own thread and cuts its own pilot hole. • No drilling- “Drills” its own hole • Much easier, faster and more efficient • High productivity. • Stainless steel does not rust

Features The shank is unthreaded and the plain portion immediately under the head, allows two pieces of wood to be pulled tightly as the shank turns freely in the top piece whilst pulling the bottom piece tighter. Thread is coarser and wider spaced than the traditional wood screw.

General You can measure a screw by the size of the head, its thickness or by the length.

BLIES CODE DESCRIPTION SIZES QUANTITIES

BLEU073 CUT-SCREW™ STAINLESS 4.0x 30mm Q:16








DECKING SCREWS

• Cutting point and square drive • Ruspert coating is 13 times more rust resistant than

zinc plating. • Trim head • Easy to sink • Superior finish • Less visible

BLIES CODE

DESCRIPTION

SIZES QUANTITIES

BLEU080 DECKING SCR SMTH SHK 4.0x 40mm Q:500








This product is only available in trade packs and bulk packs


+27 11 029 5338

BRASS COACH SCREWS

BLIND RIVETS

BLIES CODE

DESCRIPTION

SIZES QUANTITIES

BLEU088 BLIND RIV ST/T OPEN 304 4.0x15mm Q:10




+27 11 029 5338


COACH SCREW


BLEU091 COACH SCREW GALV 6x 30mm Q:20








BLEU103 COACH SCREW GALV 10x125mm Q:6

































+27 11 029 5338



























CUT SCREW

BLEU 161 CUT-SCREW™ STAINLESS 4.0x 30mm Q:16








+27 11 029 5338


SELF TAPPER

BLIES CODE

DESCRIPTION SIZES QUANTITIES

BLEU168 SELF TAPPER PAN/COM 3.0x 9mm Q:40


BLEU170 SELF TAPPER RSD CSK 3.0x16mm Q:30


BLEU172 SELF TAPPER PAN/COM 5.5x16mm Q:25






BLUE178 SELF TAPPER PAN/COM 3.5x13mm Q:35




















+27 11 029 5338


METAL SCREWS AND ANCHORS

BONDED WASHERS EXPANSION BOLTS EXPANSION EYE

EXPANSION HOOKS EXPANSION SLEEVE NUT SETTER

SELF DRILL TEK

WALL PLUGS

SELF TAPPER SCREW TOGGLE SPRING











EXPANSION BOLTS • Drill first hole into the structure, the same diameter as the shell. Drill the second hole into the fixing and ensure it is the same diameter as the bolt • Align the fixing into the structure and screw in bolt. Use a spanner to

tighten bolt. • For heavyweight fixings in concrete or natural stone

TECHNICAL SPECS Number Bolt Length Shell Spanner no Hole in fixture Hole in wall

M5 50mm 40mm 8 6mm 10mm

M6 55mm 45mm 10 6.5mm 12mm

M8 65mm 50mm 13 9mm 14mm

M10 70mm 60mm 17 11mm 16mm

M12 90mm 75mm 19 13mm 20mm

http://www.eureka.co.za/images/stories/expansion_boplts.png

• Malleable cast iron and zinc plating. • When tightening the nut/screw the shell is pulled into the

anchor expanding and wedging it inside the anchor base. • The action of tightening the bolt causes the nut to move

towards the surface and expanding the shell against the wall of the hole and enabling the fixing to take the load immediately.

• Yellow passivation making it rust resistant

PRODUCT SPECS

• Make sure you have someone close at hand for some assistance

• Don’t tighten too much, especially n the corner brickwork as it could crack the brick.

• Bolt can be removed without harming the shell. • Very strong for vertical and horizontal fixings.

Hints & Tips

• Ideal for heavy load fixings • Vertical and horizontal loads can be handled • Don’t tighten too much, especially n the corner brickwork

as it could crack the brick. • Bolt can be removed without harming the shell. • Very strong for vertical and horizontal fixings.

Advantages

Disadvantages

• Do not use on face brick walls


BLEU 197 EXPANSION BOLT OD:10 5x 50mm Q:2







BLEU 204 EXPANSION BOLT OD:14 8x110mm Q:6



BLEU 207 EXPANSION BOLT OD:16 10x110mm Q:4












DRILL BITS

HSS GENERAL BIT HSS TITAN PRECISION BIT MASONRY BIT

SDS BIT SPARE BIT TILE & GLASS BIT

DRYWALL FLAT 50MM

DRYWALL

PIZI 25MM POZI 50MM SQUARE BIT


+27 11 029 5338







http://www.eureka.co.za/images/stories/bits.jpg







HSS GENERAL BIT


BLEU 219 D/BIT HSS BLACK 2.5mm Q:1















MASONRY BIT


BLEU 257 D/BIT MASONRY LONG 6.0x300mm Q:1






BLEU 263 D/BIT MASONRY 20.0x150mm Q:1

BLEU 264 D/BIT MASONRY 3.0x 75mm Q:1













+27 11 029 5338

HSS TITAN PRECISION BIT


BLEU 219 D/BIT HSS TITAN GOLD 1.0mm Q:1







































+27 11 029 5338

SDS PLUS BIT


BLEU 276 4F65 D/BIT SDS PLUS 22.0x160mm Q:1

BLEU 277 4F75 D/BIT SDS PLUS 22.0x400mm Q:1

SPADE BITS


BLEU 278 4A61 D/BIT SPADE FLAT TIT 10.0x300mm Q:1




BLEU 282 4B61 D/BIT SPADE FLAT TIT 12.0x300mm Q:1

BLEU 283 4B81 D/BIT SPADE FLAT TIT 12.0x160mm Q:1

BLEU 284 4C61 D/BIT SPADE FLAT TIT 16.0x300mm Q:1

BLEU 285 4C81 D/BIT SPADE FLAT TIT 16.0x160mm Q:1

BLEU 286 4D61 D/BIT SPADE FLAT TIT 18.0x300mm Q:1




BLEU 290 4.00E+61 D/BIT SPADE FLAT TIT 22.0x300mm Q:1

BLEU 291 4.00E+81 D/BIT SPADE FLAT TIT 22.0x160mm Q:1

BLEU 292 4F61 D/BIT SPADE FLAT TIT 25.0x300mm Q:1

BLEU 293 4F81 D/BIT SPADE FLAT TIT 25.0x160mm Q:1

BLEU 294 4G61 D/BIT SPADE FLAT TIT 32.0x300mm Q:1

BLEU 295 4G81 D/BIT SPADE FLAT TIT 32.0x160mm Q:1


+27 11 029 5338

RIVETS

Rivets have an variety of applications. They can be used on cars, caravans and motor cycles; bikes, boats, chairs, shelving, door handles and toys; briefcases, bags and satchels: garden- To name but a few

Using a rivet gun is also east. The rivet is simply loaded into the nose piece, and then insert through the holes which have been drilled into the surface being fastened. The gun is squeezed to force the mandrel and then released

• Troublesome screws or nuts and bolts are replaced with fast, trouble free rivets.

• Tight, vibration-resistant joints for more reliable long lasting assembly • Improved neat appearance • Quick assembly with minimum operator error • Inexpensive and versatile-fasten hard or soft materials without distortion or

stripping metal to metal, plastic to metal, wood to metal. • Saves up to 50% of installation. • Easy resolvability for repairs • Can be installed from one side where the other side is inaccessible • Supplied in a full range of sizes, in convenient packets, trade packs or bulk

packs. • Eureka prepacks its rivets and provides sands on which to merchandise both

rivets and riveting

LARGE FLANGE RIVETS CLOSED END RIVETS NORMAL RIVET

RIVET WASHER RIVET WASHER


+27 11 029 5338






LARGE FLANGE

RIVETS

BLIES CODE


BLEU 305 BLIND RIV ALM LRG FL 4.0x10mm Q:30

BLEU 306 BLIND RIV ALM LRG FL 4.8x 8mm Q:30










BLEU 316 BLIND RIV ALM LRG FL 4.8x 8mm Q:250





CLOSED END RIVETS

BLIES CODE


BLEU 296 BLIND RIV ALM CLOSED 4.0x10mm Q:60

BLEU 297 BLIND RIV ALM CLOSED 4.8x 8mm Q:60








RIVET WASHER

BLIES CODE


BLEU 377 WASHER RIVET? ZP 3.0mm Q:100




+27 11 029 5338

NORMAL RIVET

BLIES CODE


BLEU 321 BLIND RIV ALM OPEN 3.2x 8mm Q:30

BLEU 322 BLIND RIV ALM OPEN 3.2x10mm Q:25






















































BLEU 376 BLIND RIV ALM OPEN 4.8x18mm Q:1500 [email protected] Tel:+27 11 789

3388 CELL: +27 72 527 8169 +27 11 029 5338

CLOUT NAIL CUT STEEL NAIL ESUTCHEON NAIL

FENCING STAPLE MASONRY NAIL PANEL PINS

NAILS

ROOF NAIL & SEAL TACK BLUE CUT TACK UPHOLSTERY

WIRE NAIL


+27 11 029 5338











NAIL IN RIMMED

Size Pilot Hole

4x25 4mm

5x33 5mm

5x50 5mm

6x37 6mm

6x55 6mm

6x70 6mm

8x54 8mm

8x72 8mm

8x100 8mm

Tension/Shear

?Size Concrete(Tension→) Brick(Tension→) Sandstone(Tension→) Shear↓

4mm 15kg 15kg ?10kg ?30kg

5mm 22kg 22kg ?17kg ?70kg

6mm 28kg 28kg ?25kg ?100kg

8mm 41kg 41kg ?38kg ?120kg

BLIES CODE DESCRIPTION SIZES QUANTITIES NAIL IN WHITE RIMMED 5x 35mm Q:6

NAIL IN WHITE RIMMED 6x 35mm Q:6





NAIL IN WHITE RIMMED 8x100mm Q:15













































NAIL IN NYLON

Filled plug with helical shanked screw assembled. Expanded by hammering screw into plug through fixing entire assembly. Can be removed by unscrewing from plug

Installation Drill correct diameter hole through component and into base at least as deep as Overall plug length. Nail- Inn into hole. Hammer screw until head sits within plug Flange. Remove if required by unscrewing. Can be re-used if not damaged.

Holes Size Pilot Hole

4x25 4mm

5x33 5mm

5x50 5mm

6x37 6mm

6x55 6mm

6x70 6mm

8x54 8mm

8x72 8mm

8x100 8mm

Tension/Shear Size Concrete(Tension→) Brick(Tension→) Sandstone(Tension→) Shear↓

4mm 15kg 15kg 10kg 30kg 5mm 22kg 22kg 17kg 70kg 6mm 28kg 28kg 25kg 100kg 8mm 41kg 41kg 38kg 120kg

BLIES CODE


BLEU 380 NAIL IN TRU-FIX 5x 35mm Q:200






BLEU 386 NAIL IN TRU-FIX 8x100mm Q:50

BLEU 387 NAIL IN TRU-FIX 8x120mm Q:40

http://www.eureka.co.za/components/com_virtuemart/shop_image/product/Nail_in_tru_fix_48f59e54ac3d7.png

COUPLING NUT COUPLING WASHERS DOME NUTS

HEX NUTS MACHINE SCREW & WINGNUT

NYLOCK NUT

NUTS WASHERS

SPLIT PIN SQUARE NUT WASHER FLAT SMALL

WASHER LARGE BODY WASHER SQUARE WING NUT













COUPLING NUT

BLIES CODE DESCRIPTION SIZES QUANTITIES BLEU 387 NUT COUPLING ZP M6 Q:2

BLEU 388 NUT COUPLING ZP M8 Q:2

BLEU 389 NUT COUPLING ZP M10 Q:2

COUPLING WASHERS

BLEU 390 WASHER CUP NP 3.5mm #6 Q:50



DOME NUTS

BLEU 393 NUT DOME???? ZP 5mm Q:20



HEX NUTS


BLEU 396 NUT HEX????? ZP 3mm Q:50














BLEU 410 NUT HEX????? ZP 6mm Q1000




BLEU 414 NUT HEX & FLAT WASHER 20mm Q:24ea

MACHINE SCREW & WINGNUT


BLEU 415 MACH & WING S/BR CHD 5x 50mm Q:2

NYLOCK NUT


BLEU 416 NUT NYLOCK ZP 3mm M3 Q:50









SPLIT PIN


BLEU 425 SPLIT PIN SOLID BRAS 2.5x25mm Q:4



WASHER LARGE BODY


BLEU 428 5X25X1.5MM

BLEU 429 6X32X1.5MM

BLEU 430 8X38X1.5MM

BLEU 431 10X45X1.5MM




CUP SQUARE BOLT & NUT DOOR KNOB SCREW (MUSHROOM)

GUTTER BOLT & NUT

HEX SET SCREW & NUT HOOK BOLT & NUT MACHINE SCREW & NUT (CHEESEHEAD)

BOLTS HEX SET SCREWS

MACHINE SCREW & NUT








CHIPBOARD SCREWS

BLIES CODE

SUPPLIER CODE


BLEU 435 7BL20U

CUP SQUARE BLT & NUT 6 x 40mm Q:4

BLEU 436 7BL30U


BLEU 437 7BL40U

CUP SQUARE BLT & NUT 10 x120mm Q:4

BLEU 438 7BM20U


BLEU 439 7BN20U


BLEU 440 TP701


BLEU 441 TP704


BLEU 442 TP705


BLEU 443 TP711


BLEU 444 TP716


BLEU 445 TP726


BLEU 446 BP716


BLEU 447 BP726


DOOR KNOB SCREWS BLIES CODE SUPPLIER CODE


BLEU 448 7BD10U DOOR KNOB SCREW 4x 25mm Q:10

BLEU 449 7BE10U DOOR KNOB SCREW 4x 35mm Q:10

BLEU 450 7BF10U DOOR KNOB SCREW 4x 60mm Q:10

GUTTER BOLT & NUT

BLEU 451 GUTTER BOLT & NUT 6x12mm Q:10





















HEX SET SREWS & NUTS

BLEU 472 HEX SETSCR&NUT GALV 6x 16mm Q:20




BLEU 476 HEX SETSCR&NUT GALV 8x100mm Q:4


















































526 HEX SETSCR&NUT GALV 12x100mm Q:80


+27 11 029 5338

HOOK BOLT & NUT

BLEU 527 HOOK BOLT & NUT ZP 6x 90mm Q:15

BLEU 528 HOOK BOLT & NUT ZP 6x 90mm Q:50

MACHINCE SCREW & NUT ( CHEESEHEAD)

BLEU 529 MACH SCR & NUT CH/HD 5x 20mm Q:12









+27 11 029 5338

MACHINE SCREW & Nut (COUNTERSUNK)

BLEU 534 MACH SCR & NUT CSK 3x 16mm Q:15










BLEU 544 MACH SCR & NUT CSK 5x100mm Q:10

BLEU 545 MACH SCR & NUT CSK 6x100mm Q:6





MACHINE SCREW & Nut (COUNTERSUNK)

BLEU 550 CUP SQUARE BLT & NUT 6 x 40mm Q:4


BLEU 552 CUP SQUARE BLT & NUT 10 x120mm Q:4












+27 11 029 5338

Blies is a company based in south Africa. Since our business relies mainly on export by train, sea and air freight, BLIES strives to fulfil its role in sourcing all kinds of manufacturing commodities and exporting them throughout our group markets. In so doing, we aim to position ourselves as leading traders in the African region and the rest of the world

27 Bond Street Ferndale Randburg South Africa Contact person: Ninon Kaozi Marketing department Tel: +27 11 789 3388 Email: [email protected]

Documents

NUTS, BOLTS & SCREWS - Blies Bolts and Nuts.pdfNUTS, BOLTS & SCREWS Our aim is to make your fasten and fix it projects easier, hassle free with a dash of speed. We have a total solution