Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
A Division of the CIDC Corporation Heat Transfer SpecialistsSINCE 1917
OCS Industries www.ocsind.com
LARGEST INVENTORY
we keep the
IN THE NATIONANTICIPATINGwe constantly manufacture for stock
YOUR NEEDS
Phone: 718.338.5111E-Mail: [email protected]
[email protected] [email protected]
Cast Iron Radiation, Convectorsand Much More
2 tel: 718.338.5111 fax: 718.338.8529 website: www.ocsind.com
CAST BASEBOARD
DURABLECAST IRON
BASEBOARD
CONTENTS
Dear Valued Customer,
OCS Industries takes pride in the fact that it has been the convector and cast iron
radiator source since 1917, with millions of satisfied homeowners enjoying the quality
and durability of our products for more than 80 years.
We reiterate our continuted commitment to quality, price, and outstanding service to
you, our valued customers. We look forward to serving you for another eight decades.
Wishing you continued success.
O.C.S.
Accessories Ratings Dimensions Weights 3 4
SLENDERIZED CAST TUBEFree-StandingCast Iron Radiator
5 6
WALLHUNG
SlenderizedCast IronRadiator
CASTRAYDurableCast IronRadiators
5X20
CLEOPATRAElegant
Cast IronRadiator
7
108-9
BASEVECTORCabinets &
Elements Dimensions
Ratings
CONVECTORCABINETS
All Types &Dimensions
CONVECTORELEMENTS
All Types &Dimensions
BRASSVALVES
Back Cover 11 12-13 14-15
CAST IRON STEEL COPPER
Cast BaseboardCast Baseboard
9 7/8
9 7/8
1 1/8
7/8
2 7/16
3/4
3tel: 718.338.5111 fax: 718.338.8529 website: www.ocsind.com
DURABLE CAST IRON BASEBOARD dimensions ratings
IBR RatingsBTU/HR/FT
THE CAST BASEBOARD WITH ITSUNIQUE INTEGRAL CAST FIN DESIGN
MAKES FOR HIGH EFFICIENCY ANDMAXIMUM OUTPUT.
YOUR GUARANTEE OFPERFORMANCE. NARROW TRIM LINESALLOWS UNIT TO BLEND WITH ANY DECOR.
WATERFLOW
PRESS, DROPENT/EXIT
1 G.P.M.500 LBS/HR
4 G.P.M.2000 LBS/HR
PRESS, DROPPER/FT ADDT’L
150˚F
160˚F
170˚F
180˚F
190˚F
200˚F
210˚F
215˚F
220˚F
370
440
500
570
640
700
770
800
830
390
470
530
600
680
740
810
850
880
98.2*
23.2*
582.4*
411.8*
*MILLINCHESSTEAM RATING 780 BTU/HR/FT (3.25 SQ FT EDR)MAXIMUM ALLOWABLE WORKING PRESSURE -30 PSI, WATER: 15 PSI, STEAM.NOTE: THE PRESSURE DROP MUST BE SEPARATELY CALCULATED FOR EACH INDIVIDUAL ASSEMBLY
WATER CONTENT 0.3 GALLONS PER LINEAR FOOT.
Dimensions
Assembly Information
Cast Baseboard
Accessories
FRONT VIEW BACK VIEW
WEIGHT/LB.PER FT. Approx.
17Cast Iron Base Board per linear ft.
Valve Enclosures (Inter, Right or Left) BVE
Dummy Covers per foot BDC4
4" End Cap (Right) BECR4
4" End Cap (Left) BECL4
6" End Cap (Right) BECR6
6" End Cap (Left) BECL6
Inside Corner BIC
6" Flexible Connector FLEX6
9" Flexible Connector FLEX9
¾" Push Nipples BPN34
¾" Vent Plugs BVP34
Tie Bolts with Nuts BTB
Top or Bottom Support BTS
CastSlope Assembly Tool BAT
PART #
Installation of panels longer than 24" requires push nipples, adhesive and nuts & bolts to be applied wherever sections meet. A special assembly tool is available. Installation of panels 6 ft. or longer requires top or bottom support.NOTE: l=B=R ratings are determined from tests made in accordance with the l=B=R testing andrating code for baseboard type radiation, including an allowance of 15% for heating effectpermitted by the code.Standard flow rate of 500 lbs. (1 gpm) per hour must be used.Rating based on active length. Active length same as total length.
NOTE: For additional part numbers of other baseboard assemblies refer to master Part# list
Part # 1½FT. 2FT. 2½FT. 3 FT. 3½FT 4 FT. 4½FT. 5 FT. 5½FT. 6 FT.
BAR1
BAL112
BAP112
BAR2
BAL2
BAC2
BAP2
12" R.H.18" L.H.18" PANEL24" R.H.24" L.H.
24" INTER
24" PANEL
A 9 7/8 HEIGHT
B 1 1/8 INLET
C 7/8 OUTLET
D 2 7/16 DEPTH
E ¾ TAPPINGS
FINSTIE BOLT
PUSH NIPPLE
BOTTOM SUPPORT
IB
R
B
FINSTIE BOLT
PUSH NIPPLE
BOTTOM SUPPORT
C
D
E
AA
Cast Tube SlenderizedCast Tube Slenderized
4 tel: 718.338.5111 fax: 718.338.8529 website: www.ocsind.com
Cast Tube SlenderizedCast Tube SlenderizedDURABLE CAST IRON RADIATORS dimensions ratings
Cast TubeFREE STANDING CAST IRON RADIATORS
WEIGHT/LB.PER SECTION Approx.
Cast Tube 4 x 19 7¼Cast Tube 4 x 25 8½Cast Tube 6 x 25 13¾
ACCESSORIES
1” Push Nipples TPN1
1” Plug TP1
1 ¼” Plug TP114
2” Pedestal PED2
3” Pedestal PED3
PART #
Ratings SQ. FT./EDR
NO. OF LENGTH 1¾” 19” HEIGHT 25” HEIGHT 25” HEIGHTSECTIONS PER SECTION 1.6SQ.FT. PER SECTION 2.0 SQ.FT. PER SECTION 3.0 SQ.FT. PER SECTION
STOC
KSP
ECIA
L OR
DER
468101214161820222426283032343638404244
7.0”10.5”14.0”17.5”21.0”24.5”28.0”31.5”35.5”38.5”42.0”45.5”49.0”52.5”56.0”59.5”63.0”66.5”70.0”73.0”77.0”
6.4”9.6”12.8”16.0”19.2”22.4”25.6”28.8”32.0”35.2”38.4”41.6”44.8”48.0”51.2”54.4”57.6”60.8”64.0”67.2”70.4”
T4194
T4196
T4198
T41910
T41912
T41914
T41916
T41918
T41920
T41922
T41924
T41926
T41928
T41930
T41932
T41934
T41936
T41938
T41940
T41942
T41944
T4254
T4256
T4258
T42510
T42512
T42514
T42516
T42518
T42520
T42522
T42524
T42526
T42528
T42530
T42532
T42534
T42536
T42538
T42540
T42542
T42544
81216202428323640444852566064687276808488
T6254
T6256
T6258
T62510
T62512
T62514
T62516
T62518
T62520
T62522
T62524
T62526
T62528
T62530
T62532
T62534
T62536
T62538
T62540
T62542
T62544
121824303642485460667278849096102108114120126132
NOTE: HEAT EMISSION - BASED ON 240 BTU (STEAM) PER SQUARE FOOT PER HOURMAXIMUM WORKING PRESSURE: 15 LBS. STEAM, 30 LBS. WATER
AV. WATER TEMP.IN RADIATORHEAT EMISSIONBTU PER SQ. FT.
220° 215° 210° 200° 190° 180° 170° 160° 150°
250 240 230 210 190 170 150 130 110
4 x 1 9 0 . 0 8 G a l l o n s Pe r S e c t i o n
4 x 2 5 0 . 1 2 G a l l o n s Pe r S e c t i o n
6 x 2 5 0 . 1 7 G a l l o n s Pe r S e c t i o n
Dimensions
4 x 1 9 15 7⁄₁₆” 4 ½” 211/16” 19” 17 13/16”
4 x 2 5 21 7⁄₁₆” 4 ½” 2 11/16” 25” 23 13/16”
6 x 2 5 21 7⁄₁₆” 6 7/8” 2 11/16” 25” 23 13/16”
S I Z E A B & C D E * F
* LEGLESS - OVERALL HEIGHT. TAPPING - TOP-1” BOTTOM-1¼”
ADD ½” TO LENGTH FOR EACH BUSHING.END SECTION REGULARLY SUPPLIED WITH 1” TOP TAPPING AND 1¼” BOTTOM TAPPINGS.NOTE: CAST TUBE RADIATORS ARE SOLD IN EVEN * NUMBER OF SECTIONS UP TO A MAXIMUM OF 44 SECTIONS. FOR ASSEMBLIES FROM 26 TO 44 SECTIONS, ONE EXTENDED CENTER LEG SECTION IS FURNISHED.ODD SIZES AVAILABLE UPON REQUEST
6 x 25
4 x 254 x 19
EABF
DC
Wall Hung SlenderizedWall Hung Slenderized
tel: 718.338.5111 fax: 718.338.85295
4x19
4x25
71⁄4"
81⁄2"
$25$27
Wall HungHeavy DutyBrackets
TIE BOLT1/4" x 3 1/4"
BUTTONS FORWALL & TUBULAR
A
B
C
SHORT HOOKSTANDART HOOK
8”
BOTTOM OF RADIATOR
1 1/4”3 1/4”
TUBULAR
x
1 1/2"
2 1/2"
1 1/8"
1 1/8"
1/2"
FOR 1/2”
WALL
ADJUSTABLE RADIATOR BRACKETS
4 x 19 or 4 X 25With No Legs
Dimensions
AVAILABLE
WITH HEAVY DUTY
BRACKETS
• For Part #’s refer to master Part # List
• 4x19 or 4x25 Wall Hung Radiators are available 4 thru 44 sections• For Ratings & Dimensions see page 4• Odd sizes pavailable upon request
BWH1 3 LBS $55
WEIGHT / LBS.PER SECTION
PRICE PERSECTION
SHIPPINGWEIGHT / LBS.PART #
PRICE PERPIECE
DIMENSIONS • RATINGS • PRICESLEGLESS CAST IRON RADIATORS
5tel: 718.338.5111 fax: 718.338.8529 website: www.ocsind.com
CastRay 5 x 20CastRay 5 x 20
tel: 718.338.5111 fax: 718.338.85296
COMBINES CONVECTIONWITH RADIANT HEAT!
• Sanitized Heat• Evenly Circulated Heat• Consistent Heat Retention• Cast Iron Durability• Perfect for Remodeling• Can be Recessed*
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
SIZE / NO.OF SECTIONS
STO
CKSP
ECIA
L O
RDER
Ratings
9
131⁄2
18
221⁄2
27
311⁄2
36
401⁄2
45
491⁄2
54
581⁄2
63
671⁄2
72
761⁄2
81
851⁄2
90
941⁄2
99
OVERALLLENGTH
FREE STANDINGRATING SQ. FT*
APPROX.
R04
R06
R08
R10
R12
R14
R16
R18
R20
R22
R24
R26
R28
R30
R32
R34
R36
R38
R40
R42
R44
PARTNUMBER
9.0
13.5
18.0
22.5
27.0
31.5
36.0
40.5
45.0
49.5
54.0
58.5
63.0
67.5
72.0
76.5
81.0
85.5
90.0
94.5
99.0
Customized Features
Specifications
*IMPORTANT NOTE: 10%–15% SHOULD BE ADDED TO ROOM REQUIREMENTS AND 20% WHEN UNIT IS RECESSED BEFORE SELECTING RADIATOR SIZE.
*RATING PER SECTION 2.25RATING º 2.25 x NO. OF SECTIONSAPPROXIMATE SHIPPING WEIGHT PER 5.1 LBS.
NOTE: CUT OUT FOR RECESS SHOULD BE 1/2" LONGER AND 1/4" HIGHER THAN RADIATOR
MAXIMUM WORKING PRESSURE:15 LBS. STEAM, 30 LBS. WATER
ODD SIZES AVAILABLE ON REQUEST
WATER VOLUME PER SECTION0.15 GALLONS
SNAP ON DESIGNER GRILLEASY TO REMOVE& TO REPLACE
ALL AIR VENT TAPPINGS 1/8" ALL BOTTOM TAPPINGS 1 1/4"
5
20
4 5 ⁄8
"
Cast Iron Radiators
Snap on Grill (per section when ordered separately)
1" Push Nipples
$29.90
2.05
1.25 ea
RSOG
TPNI
PRICE/$PER SECTION
ACCESSORIES
14
WEIGHT/LB.PER SECTION
PART #
Approx.CastRay
with snapon grill
ODD SIZES AVAILABLE UPON REQUS
DIMENSIONS • RATINGS • PRICESDURABLE CAST IRON RADIATORS
6 tel: 718.338.5111 fax: 718.338.8529 website: www.ocsind.com
RGRTPN1
CleopatraCleopatra
tel: 718.338.5111 fax: 718.338.85297
List Price Per Section..............$119
Square Ft. - EDR 3.07Water Output BTU/H(180° F Avg. Temp.) 521Steam Output BTU/H(215° F Avg. Temp.) 736Shipping Weight 26 LBS.
Per Section
• All Steam Vent Tappings 1/8” NPT
• Pipe Tappings 1” NPT top. 1 - 1/4 bottom
3 - 1/16” 8 - 15/16”
23 -
1/2”
30”
4 - 3
/16”
1” NPT TOPpipe connectionbottom 1-1/4
1/8” female NPT(steam, vent)
9 - 3/4”
Ratings
Accessories
Dimensions
4
6
8
10
12
14
16
18
20
NUMBEROF SECTIONS
CLEO4
CLEO6
CLEO8
CLEO10
CLEO12
CLEO14
CLEO16
CLEO18
CLEO20
PARTNUMBER
OVERALLLENGTH12.25
18.38
24.50
30.88
36.72
42.84
48.96
55.08
61.20
RATINGSQ. FT. EDR
12.28
18.42
24.56
30.70
38.84
42.98
49.12
55.26
61.40
MAXIMUM WORKING PRESSURE: 15 PSI STEAM, 30 PSI WATER• WATER CONTENT - 0.62 GAL/SECTION
1-1/4” Treaded Push Nipples
1-1/4” Special Gasket
Assembly Tool
7.90 ea.
4.99 ea.
99.00 ea.
CLEOSB114
CLEOG114
CLEOTOOL
PART #ITEM
DIMENSIONS • RATINGS • PRICESELEGANT, DURABLE CAST IRON RADIATOR
7tel: 718.338.5111 fax: 718.338.8529 website: www.ocsind.com
3.07
Threaded Push Nipples
8 tel: 718.338.5111 fax: 718.338.8529 website: www.ocsind.com
Convector CabinetsConvector CabinetsTYPE FBS 20” & 24” HIGH dimensions ratings
TYPE FBSFBS Cabinets with rounded corners is similar to type “F”
except that a lower air intake grille has been added. The lower flange permits one to mount this cabinet on the rough
floor, if desired, without interfering with the front panel.
CABINET LENGTHS AND DEPTHS1/2” LONGER THAN NOMINAL
CUSTOMIZED
HEIGHT & DEPTHS
AVAILABLE UPON
REQUEST
4” Cabinet
STANDARD GAUGES:18 front & top, 20 side & back
NOTE: Cabinet Type FBS, STOCK ITEMPrices for cabinet typesF W SW S SF SFB R RB SBper quote only (see page 9)
8” Cabinet
AccessoriesAccess Door with Knob Cam LockKnob Operated DampersKnockouts or Hole for Piping1/2” Rigid InsulationExtra Grill in Backshield
6” Cabinet 10” Cabinet
10”6”
4” 8”
PART # APPX. WT. PART # APPX. WT.
PART # APPX. WT. PART # APPX. WT.
PRICE PER QUOTE ONLY
C416 12C420 14C424 16C428 18C432 20C436 22C440 24C444 26C448 28C452 30C456 32C460 34C464 36
C816 14C820 18C824 20C828 24C832 28C836 32C840 46C844 40C848 44C852 48C856 52C860 56C864 60
PRICE PER QUOTE ONLY
C616 13C620 16C624 18C628 21C632 24C636 27C640 30C644 33C648 36C652 39C656 42C660 45C664 48
C1016 16C1020 20C1024 22C1028 27C1032 32C1036 37C1040 42C1044 47C1048 52C1052 57C1056 62C1060 67C1064 72
20"
24"
4 ½"
6 ½"
2¼"
2"
4"
3¼"
31/16"
6 1/8"
8 ½"
4¼"
41/8"
8 ¼"
10 ½"
5 ¼"
5 1/8"
1 0 3/8"8"
Customized Cabinet TypesCustomized Cabinet Types
tel: 718.338.5111 fax: 718.338.85299
Type F
May be installed either fully exposed or semi-recessed. When used recessed make recess 1/2" longer than the overall length and 1/4" higher than cabinet height.
Type SF
Similar in design to the "F" type except that the outlet grille is located in the sloping top, and must be used fully exposed only.
Type SFB
Similar in design to the "SF" type except that a lower grille has been added.
Type W Type SW
Designed for those installations where a floor standing installation is not feasible.
FLOOR LINE6" WALL HUNG
Identical to the "W" type except that there is a sloping top and the outlet grille is located in the top rather than in the front panel.
FLOOR LINE6" WALL HUNG
Type S
Semi-recessed with 3 sided overlap– top and ends
A
1 3/4"Cabinet 4 1/2" DeepCabinet 6 1/2" DeepCabinet 8 1/2" DeepCabinet 10" Deep
Dimension "A"1 1/2"3 1/2"5 1/2"7 1/2"
Type R Type RB
Fully recessed type with 3 sided overlap–top and ends.
1/4"1"
1"
Fully recessed type except that a lower grille has been added, with 4 sides overlap, also available with 3 sided overlap– top and ends.
1/4"1"
1"
Type SB
Semi-recessed except that a lower grille has been added, with 4 sides overlap, also available with 3 sided overlap– top and ends
A1 3/4"
1 3/4"
Dimension— "A" same as Type "S"
1 3/4"
All cabinets come standard with 18 front & top gauges and 20 side & back gauges.
Most cabinets available with knob dampers, access doors and 1/2" rigid insulation.
Available In 16 Gauge For Institutional Applications in all depths, lengths & heights
DIMENSIONSDESCRIPTIONS
9tel: 718.338.5111 fax: 718.338.8529 website: www.ocsind.com
Base VectorBase Vector
tel: 718.338.5111 fax: 718.338.8529
LENGTH 4" DEEP 6" DEEP
10
180°FA.W.T. MBH(1000 BTUh)
Hot Water
CABINET HEIGHT 12"
180°FA.W.T. MBH
(1000 BTUh)Hot Water
20°F Temp. Diff.
190°FA.W.T. MBH
(1000 BTUh)Hot Water
20°F Temp. Diff.
200°FA.W.T. MBH
(1000 BTUh)Hot Water
20°F Temp. Diff.
SteamCapacities
Sq. Ft. – EDR65ºF Entering Air
24"
36"
48"
60"
72"
84"
96"
108"
120"
LENGTH
$184
201
216
231
249
264
279
294
311
CABINET4" DEPTH PRICES
ELEMENT CABINET6" DEPTH PRICES
ELEMENT
$199
199
220
259
323
366
419
455
498
$215
231
249
264
279
293
311
325
343
$200
235
295
352
447
513
577
643
709
VC4
VC4
VC4
VC4
VC4
VC4
VC4
VC4
VC4
24
36
48
60
72
84
96
108
120
24
36
48
60
72
84
96
108
120
24
36
48
60
72
84
96
108
120
24
36
48
60
72
84
96
108
120
VE4
VE4
VE4
VE4
VE4
VE4
VE4
VE4
VE4
VC6
VC6
VC6
VC6
VC6
VC6
VC6
VC6
VC6
VE6
VE6
VE6
VE6
VE6
VE6
VE6
VE6
VE6
Ratings
24"36"48"60"72"84"96"108"120"
24"36"48"60"72"84"96"108"120"
24"36"48"60"72"84"96"108"120""
1.92.93.95.16.17.28.39.310.4
2.03.24.35.56.77.89.110.211.4
2.23.44.76.07.38.59.811.112.34
2.64.15.67.18.610.111.613.114.7
2.84.56.17.79.411.112.714.316.0
3.14.96.68.410.212.013.815.617.44
24"36"48"60"72"84"96"108"120"
11.518.024.531.538.044.551.558.064.5
16.025.534.544.053.563.072.081.591.0
Dimensions
Prices
12" HIGH FLOOR MOUNTEDSLOPE TOP ENCLOSURE
9 1/4"
12"
6 1/2"
4 1/2"
3 1/2"
45°
1 1/2"
4"
6"45°
PART# PART# PART# PART#
DIMENSIONS • RATINGS • PRICESCABINETS & ELEMENTS
10 tel: 718.338.5111 fax: 718.338.8529 website: www.ocsind.com
Convector ElementsConvector Elements
tel: 718.338.5111 fax: 718.338.8529
Dimensions & Prices
CI 419
CI 423
CI 427
CI 431
CI 435
CI 439
CI 443
CI 447
CI 455
CI 463
CI 619
CI 623
CI 627
CI 631
CI 635
CI 639
CI 643
CI 647
CI 655
CI 663
ELEMENTPART #
19"
23"
27"
31"
35"
39"
43"
47"
55"
63"
19"
23"
27"
31"
35"
39"
43"
47"
55"
63"
"L"DIMENSION
"C-C"DIMENSION163⁄4"
203⁄4"
243⁄4"
283⁄4"
323⁄4"
363⁄4"
403⁄4"
443⁄4"
523⁄4"
603⁄4"
16 3⁄4"
203⁄4"
243⁄4"
283⁄4"
323⁄4"
363⁄4"
403⁄4"
443⁄4"
523⁄4"
603⁄4"
APPROX.WEIGHT/LBS.271⁄2
311⁄2
351⁄2
411⁄2
45
491⁄2
541⁄2
63
71
81
53
59
71
79
93
97
103
116
131
153
OCSPRICE
$211.00
250.00
339.00
355.00
383.00
414.00
473.00
541.00
639.00
735.00
334.00
383.00
502.00
546.00
579.00
657.00
716.00
793.00
949.00
1103.00
4"
6"
LENGTH 4" DEEP 6" DEEP 4" DEEPCABINET HEIGHT 20" CABINET HEIGHT 24"
6" DEEP
180°FA.W.T. MBH
(1000 BTUh)Hot Water
190°FA.W.T. MBH
(1000 BTUh)Hot Water
200°FA.W.T. MBH
(1000 BTUh)Hot Water
215°FSteam
CapacitiesEDR
19"23"27"31"35"39"43"47"55"63"
19"23"27"31"35"39"43"47"55"63"
19"23"27"31"35"39"43"47"55"63"
19"23"27"31"35"39"43"47"55"63"
1.51.92.32.52.73.13.54.14.95.7
1.62.02.32.73.13.44.04.55.46.3
1.82.22.63.03.33.74.34.95.96.9
9.011.013.015.017.019.022.025.030.035.0
2.32.73.44.04.65.25.76.47.79.0
2.53.03.84.35.05.86.37.08.59.9
2.83.34.14.75.56.36.97.79.310.8
14.017.021.024.028.032.035.039.047.055.0
1.82.12.52.72.93.23.84.65.46.2
2.02.32.73.13.43.94.45.05.96.8
2.22.63.03.33.74.24.85.56.57.5
11.013.015.017.019.021.524.528.033.038.0
2.63.13.74.24.95.56.06.78.09.3
2.93.44.14.75.46.26.77.48.810.3
3.23.74.55.15.96.77.38.09.711.2
16.019.023.026.030.034.037.041.049.057.0
AVAILABLE4" & 6" DEEP
11
DIMENSIONS • RATINGS • PRICESCAST IRON
Ratings
IMPORTANT NOTE: 10-15% SHOULD BE ADDED TO ROOM REQUIREMENTSCABINET TYPES– FBS, SF, SFB, R, RB, S, SB, W, SW. (Nominal Heights 20"–24"). CUSTOMIZED ELEMENT LENGTHS AVAILABLE UPON REQUEST
11tel: 718.338.5111 fax: 718.338.8529 website: www.ocsind.com
4” DEEP6” DEEP
Convector ElementsConvector Elements
tel: 718.338.5111 fax: 718.338.852912
NOMINALLENGTH
OVERALLLENGTH
"C-C"DIMENSIONS
16"20"24"28"32"36"40"44"48"52"56"60"64
15 1/219 1/223 1/227 1/231 1/235 1/239 1/243 1/247 1/251 1/255 1/259 1/263 1/2
13 11/1617 11/1621 11/1625 11/1629 11/1633 11/1637 11/1641 11/1645 11/1649 11/1653 11/1657 11/1661 11/16
Center-to Center
Tapped:1/2"
Tapped:3/4"
2"
Tapped1 1/4"
16" 20" 24" 28" 32" 36" 40" 44" 48" 52" 56" 60" 64"
Element Lengths 1/2" shorter then nominal
NOTE: CUSTOMIZED LENGTHS UP TO 120" LONG ARE AVAILABLEELEMENTS MAY BE SQUEEZED TO REDUCE THE DEPTH SIZE
ASSORTED HEADERS AVAILABLE
SE 416SE 420SE 424SE 428SE 432SE 436SE 440SE 444SE 448SE 452SE 456SE 460SE 464SE 616SE 620SE 624SE 628SE 632SE 636SE 640SE 644SE 648SE 652SE 656SE 660SE 664SE 816SE 820SE 824SE 828SE 832SE 836SE 840SE 844SE 848SE 852SE 856SE 860SE 864SE 1016SE 1020SE 1024SE 1028SE 1032SE 1036SE 1040SE 1044SE 1048SE 1052SE 1056SE 1060SE 1064
4”
9.012.014.517.520.523.026.029.032.035.037.540.543.013.518.022.026.030.535.039.043.548.052.056.560.565.016.021.026.531.536.542.047.052.057.062.567.572.578.019.025.031.037.043.049.055.061.067.072.079.085.091.0
451⁄461⁄273⁄49101⁄4111⁄2123⁄414153⁄416 1⁄2173⁄41961⁄273⁄493⁄4101⁄4111⁄2123⁄414151⁄4161⁄2173⁄419201⁄4211⁄29101⁄4121⁄2141⁄216173⁄4193⁄4211⁄423243⁄4261⁄2281⁄43011131517192123252729313335
Ratings & PricesELEMENTPART #
*EDRRATING
APPROX.WT./LBS.
$153.00153.00153.00153.00153.00153.00153.00165.00178.00196.00216.00227.00244.00153.00153.00153.00153.00171.00196.00217.00251.00270.00292.00312.00339.00365.00204.00204.00204.00214.00225.00242.00265.00238.00311.00336.00359.00382.00408.00283.00283.00298.00308.00321.00336.00351.00380.00407.00430.00462.00490.00517.00
OCSPRICE
6”
8”
10”
10”8”
6”4”
STEEL DIMENSIONS • RATINGS • PRICES
12 tel: 718.338.5111 fax: 718.338.8529 website: www.ocsind.com
Convector ElementsConvector Elements
tel: 718.338.5111 fax: 718.338.852913
One Pipe Steambottom supply
Hot Waterbottom supplybottom return
190°FA.W.T. MBH
(1000 BTUh)Hot Water
20°F Temp. Diff.
Cabinet Types-FBS, F, R, RB, S, SB, W
200°FA.W.T. MBH
(1000 BTUh)Hot Water
20°F Temp. Diff.
Cabinet Types-FBS, F, R, RB, S, SB, W
215°FSteam Capacities
Sq. Ft. – EDRE.A.T.= 65ºFCabinet Types-
SF, SFB, SW (Slope Top)
Height shown is for the "SW"Cabinet. Ratings listed abovealso apply to the "SF" & "SFB"cabinets which are 6" higher.
LENGTH 4" DEEP
INSTALLED HEIGHT 20"
180°FA.W.T. MBH
(1000 BTUh)Hot Water
20°F Temp. Diff.
Cabinet Types-FBS, F, R, RB, S, SB, W
16"20"24"28"32"36"40"44"48"52"56"60"64"
16"20"24"28"32"36"40"44"48"52"56"60"64"
16"20"24"28"32"36"40"44"48"52"56"60"64"
16"20"24"28"32"36"40"44"48"52"56"60"64"
1.31.82.22.63.03.43.94.34.75.25.66.06.4
1.41.92.42.83.33.74.24.75.15.76.16.57.0
1.52.12.63.13.54.04.65.15.56.16.67.17.5
8.512.515.518.521.524.527.530.533.536.039.542.045.0
6" DEEP
2.12.73.44.04.85.46.06.77.38.18.79.410.0
2.33.03.74.45.25.96.67.38.08.89.510.210.9
2.53.24.04.85.66.47.27.98.79.510.311.111.8
13.517.021.025.529.533.537.541.545.549.553.557.561.5
8" DEEP
2.43.23.94.85.56.37.07.88.59.310.110.911.7
2.63.54.25.26.06.97.78.59.310.111.111.912.8
2.83.84.65.66.57.58.39.310.110.912.012.813.9
16.019.524.529.534.038.543.548.052.556.562.066.571.5
10" DEEP
3.03.94.85.76.77.68.59.510.511.412.313.314.2
3.34.25.26.27.38.49.310.411.412.413.514.515.5
3.54.65.66.77.99.110.111.312.413.414.615.616.8
20.123.530.035.541.547.053.058.064.069.075.081.087.0
4" DEEP
INSTALLED HEIGHT 24"
1.51.92.32.83.33.74.24.75.25.66.06.56.9
1.62.12.63.13.64.14.65.15.66.16.67.17.6
1.82.32.83.43.94.45.05.56.16.67.17.68.2
9.012.516.019.022.025.028.031.034.037.040.043.046.0
6" DEEP
2.22.93.54.24.95.66.37.07.78.49.19.710.5
2.43.23.94.65.46.26.97.78.49.19.910.611.4
2.63.44.25.05.86.77.58.39.29.910.811.412.4
14.519.023.528.032.537.041.546.050.555.059.564.068.5
8" DEEP
2.63.44.35.15.96.87.68.49.210.110.911.712.6
2.83.74.75.56.47.48.39.210.011.011.912.713.7
3.14.05.16.07.08.09.09.910.911.912.913.814.9
17.020.025.030.035.039.544.549.554.058.563.568.573.5
10" DEEP
3.14.05.06.06.97.98.99.810.811.612.713.714.7
3.44.45.46.57.68.69.710.711.812.613.914.916.0
3.64.75.97.18.29.410.511.712.813.615.116.117.4
20.024.029.535.041.046.054.058.063.567.574.580.586.0
LENGTH 4" DEEP
INSTALLED HEIGHT 20"
16"20"24"28"32"36"40"44"48"52"56"60"64
8.011.013.516.018.521.024.026.529.032.034.537.039.5
6" DEEP
13.017.021.025.029.533.537.541.545.550.054.058.562.0
8" DEEP
15.020.024.529.534.039.043.548.553.058.063.068.072.5
10" DEEP
18.524.030.035.541.547.553.059.065.071.076.582.588.0
4" DEEP
INSTALLED HEIGHT 24"
9.012.014.517.520.523.026.029.032.035.037.540.543.0
6" DEEP
13.518.022.026.030.535.039.043.548.052.056.560.565.0
8" DEEP
16.021.026.531.536.542.047.052.057.062.567.572.578.0
10" DEEP
19.025.031.037.043.049.055.061.067.072.079.085.091.0
Cabinet Types-FBS, F, R, RB, S, SB,WSq. Ft. – EDR 65ºF Entering Air
Steam Capacities
Piping Connections
Vapor Systemtop supply
bottom return
Vapor Systembottom supplybottom return
STEEL DIMENSIONS • RATINGS
Ratings
13tel: 718.338.5111 fax: 718.338.8529 website: www.ocsind.com
Convector ElementsConvector Elements
tel: 718.338.5111 fax: 718.338.852914
Ratings & Prices
CE 416
CE 420
CE 424
CE 428
CE 432
CE 436
CE 440
CE 444
CE 448
CE 452
CE 456
CE 460
CE 464
CE 616
CE 620
CE 624
CE 628
CE 632
CE 636
CE 640
CE 644
CE 648
CE 652
CE 656
CE 660
CE 664
CE 816
CE 820
CE 824
CE 828
CE 832
CE 836
CE 840
CE 844
CE 848
CE 852
CE 856
CE 860
CE 864
ELEMENTPART #
8.5
12.5
16.0
19.0
22.0
25.0
28.0
31.0
34.0
37.0
40.5
43.5
46.5
14.0
18.0
22.5
26.5
31.0
35.5
40.0
44.5
48.5
53.0
57.5
61.5
66.0
17.0
22.0
27.0
32.0
37.5
43.5
48.5
53.5
59.0
64.0
69.5
74.0
79.5
*EDRRATING
APPROX.WEIGHT/LBS.
—
21⁄4
21⁄2
23⁄4
3
31⁄4
31⁄2
33⁄4
4
41⁄4
43⁄4
5
51⁄4
41⁄2
43⁄4
5
51⁄4
51⁄2
51⁄2
6
61⁄2
63⁄4
7
71⁄4
71⁄2
73⁄4
63⁄4
7
71⁄4
71⁄2
73⁄4
8
81⁄4
81⁄2
83⁄4
9
91⁄4
91⁄2
93⁄4
OCSPRICE$138.00
138.00
138.00
138.00
138.00
138.00
138.00
153.00
167.00
178.00
200.00
215.00
230.00
138.00
138.00
138.00
138.00
153.00
175.00
198.00
220.00
240.00
220.00
285.00
309.00
327.00
171.00
171.00
171.00
182.00
194.00
215.00
240.00
265.00
292.00
321.00
344.00
371.00
394.00
Dimensions
4"
6"
8"
Element Height ...................................................2”
Element Depths ................... 3 3/4”, 5-3/4”, 7-3/4”
Element Lengths: 15-3/4” thru 63-3/4” (end to end)
COPPER TUBING SIZE: 1/2” I.D. 5/8” O.D.
BRASS HEADERS
NOMINALLENGTH
OVERALLLENGTH
"C-C"DIMENSIONS
16"20"24"28"32"36"40"44"48"52"56"60"64
15 3/419 3/423 3/427 3/431 3/435 3/439 3/443 3/447 3/451 3/455 3/459 3/463 3/4
13 1/217 1/221 1/225 1/229 1/233 1/237 1/241 1/245 1/249 1/253 1/257 1/261 1/2
1/4”PLUG
Depths4” • 6” • 8”
TAPPED3/4”
TAPPED3/4”
COPPER (WITH BRASS HEADERS) DIMENSIONS • RATINGS • PRICES
Convector ElementsConvector Elements
tel: 718.338.5111 fax: 718.338.852912
NOMINALLENGTH
OVERALLLENGTH
"C-C"DIMENSIONS
16"20"24"28"32"36"40"44"48"52"56"60"64
15 1/219 1/223 1/227 1/231 1/235 1/239 1/243 1/247 1/251 1/255 1/259 1/263 1/2
13 11/1617 11/1621 11/1625 11/1629 11/1633 11/1637 11/1641 11/1645 11/1649 11/1653 11/1657 11/1661 11/16
Center-to Center
Tapped:1/2"
Tapped:3/4"
2"
Tapped1 1/4"
16" 20" 24" 28" 32" 36" 40" 44" 48" 52" 56" 60" 64"
Element Lengths 1/2" shorter then nominal
NOTE: CUSTOMIZED LENGTHS UP TO 120" LONG ARE AVAILABLEELEMENTS MAY BE SQUEEZED TO REDUCE THE DEPTH SIZE
ASSORTED HEADERS AVAILABLE
SE 416SE 420SE 424SE 428SE 432SE 436SE 440SE 444SE 448SE 452SE 456SE 460SE 464SE 616SE 620SE 624SE 628SE 632SE 636SE 640SE 644SE 648SE 652SE 656SE 660SE 664SE 816SE 820SE 824SE 828SE 832SE 836SE 840SE 844SE 848SE 852SE 856SE 860SE 864SE 1016SE 1020SE 1024SE 1028SE 1032SE 1036SE 1040SE 1044SE 1048SE 1052SE 1056SE 1060SE 1064
4”
9.012.014.517.520.523.026.029.032.035.037.540.543.013.518.022.026.030.535.039.043.548.052.056.560.565.016.021.026.531.536.542.047.052.057.062.567.572.578.019.025.031.037.043.049.055.061.067.072.079.085.091.0
451⁄461⁄273⁄49101⁄4111⁄2123⁄414153⁄416 1⁄2173⁄41961⁄273⁄493⁄4101⁄4111⁄2123⁄414151⁄4161⁄2173⁄419201⁄4211⁄29101⁄4121⁄2141⁄216173⁄4193⁄4211⁄423243⁄4261⁄2281⁄43011131517192123252729313335
Ratings & PricesELEMENTPART #
*EDRRATING
APPROX.WT./LBS.
$153.00153.00153.00153.00153.00153.00153.00165.00178.00196.00216.00227.00244.00153.00153.00153.00153.00171.00196.00217.00251.00270.00292.00312.00339.00365.00204.00204.00204.00214.00225.00242.00265.00238.00311.00336.00359.00382.00408.00283.00283.00298.00308.00321.00336.00351.00380.00407.00430.00462.00490.00517.00
OCSPRICE
6”
8”
10”
10”8”
6”4”
STEEL DIMENSIONS • RATINGS • PRICES
14 tel: 718.338.5111 fax: 718.338.8529 website: www.ocsind.com
8"6"
4"
Convector ElementsConvector Elements
tel: 718.338.5111 fax: 718.338.852915
NOMINALLENGTH
OVERALLLENGTH
"C-C"DIMENSIONS
Dimensions 16"20"24"28"32"36"40"44"48"52"56"60"64
15 1/219 1/223 1/227 1/231 1/235 1/239 1/243 1/247 1/251 1/255 1/259 1/263 1/2
13 7/817 7/821 7/825 7/829 7/833 7/837 7/841 7/845 7/849 7/853 7/857 7/861 7/8
180°FA.W.T. MBH(1000 BTUh)
Hot Water
190°FA.W.T. MBH(1000 BTUh)
Hot Water20°F Temp. Diff.
Cabinet Types-FBS, F, R, RB, S, SB, W
180°FA.W.T. MBH(1000 BTUh)
Hot Water
200°FA.W.T. MBH(1000 BTUh)
Hot Water20°F Temp. Diff.
Cabinet Types-FBS, F, R, RB, S, SB, W
215°FSteam Capacities
Sq. Ft. – EDRE.A.T.= 65ºFCabinet Types-
SF, SFB, SW (Slope Top)
LENGTH
180°FA.W.T. MBH(1000 BTUh)
Hot Water
4" DEEP
INSTALLED HEIGHT 20"
180°FA.W.T. MBH(1000 BTUh)
Hot Water20°F Temp. Diff.
Cabinet Types-FBS, F, R, RB, S, SB, W
16"20"24"28"32"36"40"44"48"52"56"60"64"
16"20"24"28"32"36"40"44"48"52"56"60"64"
16"20"24"28"32"36"40"44"48"52"56"60"64"
16"20"24"28"32"36"40"44"48"52"56"60"64"
1.11.62.02.42.83.23.63.94.34.75.15.55.9
1.21.82.22.73.13.54.04.44.85.25.76.26.5
1.32.02.52.93.43.94.44.85.35.86.36.87.2
10.013.516.520.023.026.529.533.036.039.042.546.049.0
6" DEEP
1.82.42.93.54.14.75.25.86.46.97.58.08.7
2.12.63.33.94.65.25.86.57.17.88.49.19.7
2.32.93.64.35.05.86.57.28.08.79.310.110.8
15.520.025.029.534.539.544.049.054.057.063.568.073.0
8" DEEP
2.33.03.64.25.05.76.47.17.88.59.29.910.6
2.53.34.14.85.56.37.17.98.79.510.211.111.8
2.83.74.55.36.17.07.98.89.710.611.512.413.2
19.525.532.038.544.551.057.063.569.577.082.088.094.5
10" DEEP
2.73.54.14.95.56.37.17.88.69.410.210.911.6
3.03.94.65.56.27.18.08.89.710.611.412.213.1
3.44.35.16.16.97.98.99.810.811.812.713.614.6
24.531.539.046.554.061.069.577.084.594.0103.5109.5114.5
4" DEEP
INSTALLED HEIGHT 24"
1.21.82.22.73.13.64.04.44.95.25.76.16.6
1.42.02.53.03.54.04.44.95.45.96.46.97.4
1.52.22.83.33.94.44.95.56.06.57.17.78.2
10.514.017.521.024.527.531.034.538.041.045.048.052.0
6" DEEP
2.02.63.23.84.45.05.76.36.97.58.28.79.4
2.22.83.54.24.95.66.37.07.78.49.19.810.4
2.53.23.94.75.46.27.07.88.59.410.010.911.6
16.521.526.531.537.042.047.552.557.562.568.074.078.5
8" DEEP
2.43.13.84.55.46.16.97.68.49.09.910.411.3
2.73.54.35.16.06.87.68.59.310.211.011.812.6
3.03.94.85.76.67.58.59.410.311.312.213.113.9
21.027.534.041.047.554.061.067.574.081.087.594.5101.0
10" DEEP
2.83.74.55.46.27.17.98.79.710.411.412.213.0
3.24.15.16.07.08.08.99.910.911.812.913.814.7
3.54.65.76.77.88.99.911.012.113.114.315.316.4
27.034.041.550.058.066.074.582.590.598.0106.5114.5122.0
LENGTH 4" DEEP
INSTALLED HEIGHT 20"
16"20"24"28"32"36"40"44"48"52"56"60"64
7.511.514.017.019.522.025.027.530.533.036.039.041.5
6" DEEP
13.016.520.524.529.033.037.041.045.049.053.057.061.0
8" DEEP
16.021.025.530.035.040.045.050.055.060.065.070.074.5
10" DEEP
19.024.529.034.539.044.550.055.561.066.572.077.082.5
4" DEEP
INSTALLED HEIGHT 24"
8.512.516.019.022.025.028.031.034.037.040.543.546.5
6" DEEP
14.018.022.526.531.035.540.044.548.553.057.561.566.0
8" DEEP
17.022.027.032.037.543.548.553.559.064.069.574.079.5
10" DEEP
20.026.032.038.044.050.056.062.068.574.081.086.592.5
Cabinet Types-FBS, F, R, RB, S, SB,WSq. Ft. – EDR 65ºF Entering Air
Steam Capacities
“Series 12” Element Lengths 1/2" shorter then nominal
Center-to Center
Tapped:
1/2"
Tapped:
3/4"
2"
Tapped:
1/2"
Tapped:
3/4"
16" 20" 24" 28" 32" 36" 40" 44" 48" 52" 56" 60" 64"
NOTE: CUSTOMIZED LENGTHS UP TO 120" LONG ARE AVAILABLEELEMENTS MAY BE SQUEEZED TO REDUCE THE DEPTH SIZE
Also available in
“SERIES 12” COPPER ELEMENTS• Stock sizes 4”-6”-10”-10” Deep• Lengths 16” thru 120” long• Various type headers available• Per quote only
10”
8”
6”
4”
COPPER DIMENSIONS • RATINGS
15tel: 718.338.5111 fax: 718.338.8529 website: www.ocsind.com
POLIC Y AND TERMSInvoices dated from the 1st to the 25th of
the month inclusive will be subject to a cash
discount of 2% if paid on or before the 10th
of the month following and will be due the
next succeeding day. Invoices dated the 26th
to the end of the month will be considered
dated the 1st of the following month and will
qualify for a case discount as outlined above.
The cash discount is to be computed on the
product total amount of the invoice before
any additions or deductions for transportation
or any sales or manufacturer’s taxes are
applied. All materials pertaining to the price
list are FOB our Plant. No merchandise can be
returned for credit without prior approval, and
may be subject to a 25% handling charge.
W A R R A N T YWe warrant all OCS equipment in this catalog to be free from defects in material and workmanship under normal use and service. After installation, all products must be fairly tested by the plumber; our obligation under this warranty being limited to repairing or replacing at our factory any part or parts thereof which shall within one year from day of shipment from our factory be returned to our factory with transportation charges prepaid, and which our examination shall disclose to have been defective; this warranty being expressly in lieu of all other warranties expressed or implied and of all other obligations or liabilities on our part, and we neither assume nor authorize any person to assume for us any other liability in connection with the sale of OCS products.
This warranty does not cover reimbursement to purchaser or user for any labor charges for replacement of parts, adjustments, repairs, disconnecting or reinstallation or any other work done on the job. We assume no responsibility for consequential damages of any kind, and the purchaser or user by acceptance of this equipment assumes the responsibility for the consequences of its use or misuse.
This warranty does not apply to any equipment which shall have been repaired or altered outside of our factory in any way so as, in our judgment, to affect its stability, nor which has been subject to misuse, negligence or operation conditions in excess of those stated in this catalog.
The right is reserved by OCS Industries to change specification or prices without incurring any responsibility for previously sold equipment.
OCS IndustriesE-Mail: [email protected]
[email protected] [email protected]
Phone: 718.338.5111 Fax: 718.338.8529www.ocsind.com
Part No. Description
BVCV1 1” Convector Valve
BVCV114 1-1/4” Convector Valve
BVRV34 3/4” Radiator Valve
BVRV1 1” Radiator Valve
BVRV114 1-1/4” Radiator Valve
BVSGV1 1” Steam Gate Valve
BVSGV114 1-1/2” Steam Gate Valve
BVNYCT NYC Trap 2 x 1-1/2”
Ball Valves (IPS & Copper) in all sizes
BRASS VALVES