odule Specification

d

ITEM CONTENTS UNIT LCD Type TFT/Transmissive/Normally black/IPS /

Size 10.1 Inch

Viewing Direction Free /

Outside Dimensions (W × H × D ) 257.96 x 168.60 x 9.30 mm3

Active Area (W × H) 216.96 × 135.60 mm2

Pixel Pitch (W × H) 0.1695 × 0.1695 mm2

Resolution 1280 (RGB) × 800 /

Brightness 850 cd/m2

LCD Interface Type LVDS /

Color Depth 16.7M /

Pixel Arrangement RGB Vertical Stripe /

LCD Driver EK79202B /

With/Without Touch With Projected Capacitive Touch Panel /

CTP Driver ILI2312 /

Touch Interface Type USB /I2C/ Optional UART /

Bonding Technology Optical Bonding /

Weight TBD g

IPS LVDS 10.1” LCD TFT Datasheet

RVT101HVLNWC00-B

Rev.1.0

2020-10-22

LC

D T

FT

Mo

du

le S

pe

cific

atio

n

Note 1: RoHS compliant

Note 2: LCM weight tolerance: ± 5%.

© 2020 Riverdi Page 2 of 20 www.riverdi.com

RVT101HVLNWC00-B

LCD TFT Datasheet Rev.1.0

REVISION RECORD

REVNO.

REVDATE

CONTENTS

REMARKS

1.0 2020-10-22 Initial Release

CONTENTS

REVISION RECORD ................................................................................................................................... 2

CONTENTS ............................................................................................................................................... 2

MODULE CLASSIFICATION INFORMATION ...................................................................................... 3

MODULE DRAWING ......................................................................................................................... 4

ABSOLUTE MAXIMUM RATINGS ...................................................................................................... 5

ELECTRICAL CHARACTERISTICS ........................................................................................................ 5

BACKLIGHT DRIVING CONDITIONS .................................................................................................. 5

ELECTRO-OPTICAL CHARACTERISTICS ............................................................................................. 6

BLOCK DIAGRAM ............................................................................................................................. 8

INTERFACE DESCRIPTION ................................................................................................................ 8

TIMING CHARACTERISTICS ............................................................................................................ 10

9.4.1 Power on sequence with PMODE=H ............................................................................. 13

9.4.2 Power off sequence with PMODE=H ............................................................................. 13

CAPACITIVE TOUCH SCREEN PANEL SPECIFICATIONS ............................................................... 14

INSPECTION ............................................................................................................................... 15

RELIABILITY TEST ........................................................................................................................ 19

LEGAL INFORMATION ................................................................................................................ 20


RVT101HVLNWC00-B


MODULE CLASSIFICATION INFORMATION

RV T 101 H V L N W C 00 B

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.

1. BRAND RV – Riverdi

2. PRODUCT TYPE T – TFT Standard

3. DISPLAY SIZE 101 – 10.1”

4. MODEL SERIAL NO. H – High Brightness, IPS

5. RESOLUTION V – 1280 x 800 px

6. INTERFACE L – TFT LCD, LVDS

7. FRAME N – No Frame

8. BACKLIGHT TYPE W – LED White

9. TOUCH PANEL C – With Touch Panel

10. VERSION 00 – (00-99)

11. BONDING TECHNOLOGY Optical Bonding

1 10

1 4

CN11

CN2

6

10 1

DETAIL BSCALE 4:1

10 1

DETAIL DSCALE 2:1

1 4

CN1

JST SM04B-SRSS-TB

MATCHING CABLE CONNECTOR:JST SHR-04V-S-B

2*0.50±0.1W:10*0.30±0.05P:(10-1)*0.50=4.50±0.1

3.50

±0.3

5.50

DETAIL CSCALE 4:1

0.2*45°0.2*45°

D

1CN2

6

DETAIL ASCALE 4:1

SM06B-SRSS-TB(SIDE ENTRY TYPE)

MATCHING CABLE CONNECTOR:SHR-06V-S-B

-+ -+ -+

40 1COMPONENT AREA

LED-

123

1 2 3 4 5 6 7 8 9

45

LED+

LED Diagram Circuit

35.9

0

88.00

216.96(TFT A.A.)

229.46(TFT O.D.)

135.

60(T

FT A

.A.)

149.

10(T

FT O

.D.)

128.98

84.3

0

228.46(SENSOR O.D.)

257.96(CG O.D.)14

8.10

(SEN

SOR

O.D

.)

168.

60(C

G O

.D.)

16.5

0217.96(CG V.A.)

136.

60(C

G V

.A.)

16.0

0

12.0

012

.50

4.22(TFT)

0.3035.00

4*R7.00

9.30(O.D.)

63.5

7

51.2

7

18.82

56.0

7

2.025(CG+SCA+SENSOR+OCA)

MAX 1.70MAX 4.65

37.0

0

5.00

3M9495 D.S.T. (T=0.175mm)

1.275(CG+DST)1.10(CG)

STIFFENER CONTACT SIDE

COMPONENTAREA STIFFENER

46.32

60.57

BLACK MASK PRINTINGCOLOR: RAL9005

B

C

A

20.0014.75

119.7388.00

16.3

0

40.22

BLACK TAPE (T=0.05mm)

20.50

14.25

ZIF 40 PINS, 0.5mm PITCHDOWN-SIDE CONTACT, FLIP

PINOUT ON THE 2ND PAGE

PN:SN:DRAWN: 1:1.97CHECKED:APPR:

RVT101HVLNWC00-B

M.NatywaCarol Gao

2020.09.08

ISO A3[mm]

P. 1 of 1

Revision: Changes: Date:1.0 Initial Case 2020.09.08

TFT NOTES:1. LCD TYPE: TRANSMISSIVE, NORMALLY BLACK, IPS2. RESOLUTION: 1280x8003. VIEWING ANGLE: FREE4. DRIVING VOLTAGE: 3.3V5. BACKLIGHT: 45 LEDS, V f=16.0V(TYP.), I f=360mA6. ZERO BAD PIXEL

TP NOTES:1. TP STRUCTURE: G+G2. CG THICKNESS: 1.10mm3. SURFACE HARDNESS: 7H4. DRIVER IC: ILI2132A5. INTERFACE: USB; I2C; OPTIONAL UART6. OPERATING VOLTAGE: 3.3V(CTP I2C); 5.0V(CTP USB);

GENERAL NOTES:1. MODULE SURFACE LUMINANCE: 850 cd/m^22. OPTICAL BONDING3. OPERATING TEMPERATURE: -20°C ~ 70°C4. STORAGE TEMPERATURE: -30°C ~ 80°C5. WITHOUT INDIVIDUAL TOLERANCE: ±0.3mm6. RoHS COMPLIANT


RVT101HVLNWC00-B


ABSOLUTE MAXIMUM RATINGS

The following are maximum values which, if exceeded may cause operation or damage to the unit.

PARAMETER SYMBOL MIN MAX UNIT Supply Voltage VDD -0.3 3.9 V

Operating Temperature TOP -20 70 °C

Storage Temperature TST -30 80 °C

Note. The absolute maximum rating values are not allowed to be exceeded at any times. a module should be used with any of the absolute maximum ratings exceeds.

The characteristics of the module may not be recovered, or in an extreme case, the module may be permanently destroyed.

ELECTRICAL CHARACTERISTICS

PARAMETER SYMBOL MIN TYP MAX UNIT Supply Voltage VDD 2.6 3.3 3.6 V

Input Voltage ' H ' level VIH 0.7VDD - VDD V

Input Voltage ' L ' level VIL 0 - 0.3VDD V

BACKLIGHT DRIVING CONDITIONS

PARAMETER SYMBOL MIN TYP MAX UNIT Backlight Driving Voltage VF 15.0 16.0 17.0 V

Backlight Driving Current IF 315 360 405 mA

Backlight Power Consumption WBL - 5760 - mW

LED Life Time - - 50,000 - Hrs

Note 1. Each LED: IF =40 mA, VF=3.2 ±0.2V.

Note 2. Optical performance should be evaluated at Ta=25 °C only.

Note 3. If LED is driven by high current. High ambient temperature &temperature & humidity condition. The life Time of LED will be reduced. Operating life means brightness goes down to 50% initial brightness. Typical operating life time is estimated data.


RVT101HVLNWC00-B


ELECTRO-OPTICAL CHARACTERISTICS

ITEM SYMBOL CONDITION MIN TYP MAX UNIT REMARK NOTE Response Time Tr+Tf

θ=0°

∅=0°

Ta=25 °C

- 25 35 ms FIG 1. 4

Contrast Ratio Cr 800 1000 - --- FIG 2. 1

Luminance Uniformity δ

WHITE - 75 - % FIG 2. 3

Surface Luminance Lv - 850 - cd/m2 FIG 2. 2

Viewing Angle Range θ

∅ = 90° 75 85 - deg FIG 3.

6 ∅ = 270° 75 85 - deg FIG 3.

∅ = 0° 75 85 - deg FIG 3.

∅ = 180° 75 85 - deg FIG 3.

CIE (x, y)

Chromaticity

Red x

θ=0°

∅=0°

Ta=25 °C

0.22 0.26 0.30

FIG 2. 5

y 0.20 0.24 0.28

Green x 0.34 0.38 0.42

y 0.50 0.54 0.58

Blue x 0.10 0.14 0.18

y 0.09 0.13 0.17

White x 0.28 0.32 0.36

y 0.29 0.33 0.37

Note 1. Contrast Ratio(CR) is defined mathematically as below, for more information see Figure 1.

Contrast Ratio = Average Surface Luminance with all white pixels (P1, P2, P3, P4, P5)

Average Surface Luminance with all black pixels (P1, P2, P3, P4, P5)

Note 2. Surface luminance is the LCD surface from the surface with all pixels displaying white. For more

information see Figure 2.

Lv = Average Surface Luminance with all white pixels (P1, P2, P3, P4, P5)

Note 3. The uniformity in surface luminance δ WHITE is determined by measuring luminance at each

test position 1 through 5, and then dividing the maximum luminance of 5 points luminance by

minimum luminance of 5 points luminance. For more information see Figure 2.

δ WHITE = Minimum Surface Luminance with all white pixels (P1, P2, P3, P4, P5)

Maximum Surface Luminance with all white pixels (P1, P2, P3, P4, P5)

Note 4. Response time is the time required for the display to transition from white to black (Rise Time,

Tr) and from black to white (Decay Time, Tf). For additional information see Figure 1. The test

equipment is Autronic-Melchers’s ConoScope series.

Note 5. CIE (x, y) chromaticity, the x, y value is determined by measuring luminance at each test

position 1 through 5, and then make average value.

Note 6. Viewing angle is the angle at which the contrast ratio is greater than 2. For TFT module the

contrast ratio is greater than 10. The angles are determined for the horizontal or x axis and the vertical

or y axis with respect to the z axis which is normal to LCD surface. For more information see Figure 3.


RVT101HVLNWC00-B


Note 7. For viewing angle and response time testing, the testing data is based on Autronic-Melchers’s

ConoScope series. Instruments for Contrast Ratio, Surface Luminance, Luminance Uniformity, CIE the

test data is based on TOPCON’s BM-5 photo detector.

Figure 1. The definition of response time

Figure 2. Measuring method for Contrast ratio, surface luminance, Luminance uniformity, CIE (x, y) chromaticity

Figure 3.The definition of viewing angle


RVT101HVLNWC00-B


BLOCK DIAGRAM

INTERFACE DESCRIPTION

TFT assignment

PIN NO. SYMBOL I/O DESCRIPTION 1 NC - No Connection

2 VDD P Power Supply, 3.3V

3 VDD P Power Supply, 3.3V

4 NC - No Connection



7 GND P Ground

8 Rxin0- I -LVDS Differential Data Input

9 Rxin0+ I +LVDS Differential Data Input

10 GND P Ground



13 GND P Ground


RVT101HVLNWC00-B




16 GND P Ground

17 RxCLK- I -LVDS Differential Data Input

18 RxCLK+ I +LVDS Differential Data Input

19 GND P Ground



22 GND P Ground



25 GND P Ground





30 GND P Ground

31 LED- P LED Cathode

32 LED- P LED Cathode







39 LED+ P LED Anode

40 LED+ P LED Anode

Note 1. I: input, O: output, P:Power


RVT101HVLNWC00-B


Touch panel assignment

PIN NO. SYMBOL DESCRIPTION 1 USB_GND USB_Ground

2 USB_VDD USB_Power for CTP, DC 5.0 V

3 USB_D– USB _Data Signal –

4 USB_D+ USB _Data Signal +

5 I2C_GND I2C _Power Ground

6 I2C_VDD I2C _Power For CTP, DC 3.3 V

7 I2C_RST I2C _Reset Pin

8 I2C_SCL I2C _Clock Input

9 I2C_INT I2C _Interrupt Signal from CTP

10 I2C_SDA/TXD I2C _Data Signal

CON1 assignment

PIN NO. SYMBOL DESCRIPTION 1 USB_VDD USB_Power for CTP, DC 5.0V

2 USB_D– USB _Data Signal -

3 USB_D+ USB _Data Signal +

4 USB_GND USB_ Ground

CON2 assignment

PIN NO. SYMBOL DESCRIPTION 1 I2C_GND I2C _Power Ground

2 I2C_VDD I2C _Power For CTP, DC 3.3 V

3 I2C_RST I2C _Reset Pin

4 I2C_SCL I2C _Clock Input

5 I2C_INT I2C _Interrupt Signal from CTP

6 I2C_SDA/TXD I2C _Data Signal

TIMING CHARACTERISTICS

LVDS interface characteristic 6-bit LVDS input (LVBIT=L, LVFMT=H OR L)


RVT101HVLNWC00-B


8-bit LVDS input (LVBIT=L, LVFMT=L)

8-bit LVDS input (LVBIT=L, LVFMT=H)


RVT101HVLNWC00-B


Timing table

PARAMETER SYMBOL MIN TYP MAX UNIT Clock Frequency (Rate=60Hz(LVDS))

FDCLK 66.3 72.4 78.9 MHz

HSYNC Period Time TH 1380 1440 1500 DCLK

Horizontal Display area THD 1280 DCLK

Hsync Pluse Width THPW 1 - 40 Tc

Hsync Back Porch (with pluse width)

THBP 88 88 88 DCLK

Hsync Front Porch THFP 12 72 132 DCLK

VSYNC Period Time TV 824 838 872 H

Vertical Display area TVD 800 H

Vsync Pluse Width TVW 1 - 20 H

Vsync Back Porch (with pluse width)

TVBP 23 23 23 H

Vsync Front Porch TVFP 1 15 49 H

Reset timing characteristic When RESETB of the reset pin equals to Low, it will be in the condition of reset. When it is in the condition of reset, it will make the device recover the initial set. However, in order to avoid the reset noise cause reset, there is a mechanism to judge about whether the reset is needed or not.

The closed interval of Low can be shown as the following.

(Test condition: VDDIO=2.3V~3.6V, VSS=0V, TA=-20 ~+85 )

PARAMETER SYMBOL VALUE UNIT MIN. TYP. MAX.

Reset low pluse width Trst 20 - - us

Figure 4 Reset Timing


RVT101HVLNWC00-B


Power ON/OFF sequence

9.4.1 Power on sequence with PMODE=H

9.4.2 Power off sequence with PMODE=H


RVT101HVLNWC00-B


CAPACITIVE TOUCH SCREEN PANEL SPECIFICATIONS

Mechanical characteristics

DESCRIPTION INL SPECIFICATION REMARK Touch Panel Size 10.1 inch UxTouch

Outline Dimension of CTP 257.96 mm x 168.60 mm UxTouch

Product Thickness 2.35 mm UxTouch

Glass Thickness 1.1 mm UxTouch

CTP View Area 217.96 mm x 136.60 mm UxTouch

Sensor Active Area 228.46mm x 148.10 mm UxTouch

Surface Hardness 7H UxTouch

Electrical characteristics

DESCRIPTION SPECIFICATION

Operating Voltage DC 5.0 V (USB)

DC 3.3 V (I2C )

Power Consumption (IDD)

Interface USB / I2C /Optional UART

Linearity +/-1.5mm

Controller ILI2312A

I2C address 0X82

Resolution 1280 x 800

Active Mode 90 mA

Sleep Mode 10 mA


RVT101HVLNWC00-B


INSPECTION

Standard acceptance/rejection criteria for TFT module.

Inspection condition

Ambient conditions:

• Temperature: 25±°C

• Humidity: (60±10)%RH

• Illumination: Single fluorescent lamp non-directive (300 to 700 lux)

Viewing distance: 35±5cm between inspector bare eye and LCD.

Viewing Angle: U/D: 45°/45°, L/R 45°/45°


RVT101HVLNWC00-B


Inspection standard

The LCD TFT has zero bad pixel. Please refer the item “Bright/Dark dots ”.

Item Criterion

Black spots, white spots, light leakage, Foreign Particle (round Type)

𝐷 =(𝑥 + 𝑦)

2

*Spots density: 10 mm

Size =”10.1”

Average Diameter Qualified Qty

D ≤ 0.2 mm Ignored

0.2 mm < D ≤ 0.3 mm N≤4

0.5mm < D N=0

3.5” ≤ Size ≤ 5”


D ≤ 0.15 mm Ignored

0.15 mm < D ≤ 0.30 mm N≤3

0.3mm < D Not allowed

LCD black spots, white spots, light leakage (line Type)


Size =10.1”

Length Width Qualified Qty

- W ≤ 0.05 Ignored

L ≤ 5.0 0.05< W ≤ 0.1 N ≤ 3

5.0 < L 0.10< W or 5.0 < L

N = 0

3.5” ≤ Size ≤ 5”

Length/mm Width/mm Qualified Qty

- W≤ 0.03 Ignored

L ≤ 3.0 0.03< W ≤ 0.05 2

L ≤ 3.0 0.05 < W ≤ 0.1 1

3.0 < L 0.1< W Not allowed

Bright/Dark Dots

Size =10.1”

item Qualified Qty

Bright Dots 0

Dark Dots 0

Cluster Bright Dots or Dark Dots 0

Total Bright and Dark Dots 0


RVT101HVLNWC00-B


Item Criterion

Clear spots

Size >= 5”


D<0.2 mm Ignored

0.2 mm < D < 0.3 mm 4

0.3 mm < D < 0.5 mm 2

0.5 mm < D 0


Size < 5”


D < 0.2 mm Ignored

0.2 mm < D < 0.3 mm 3

0.3 mm < D < 0.5 mm 2

0.5 mm < D 0

Touch panel spot

Size >= 5”


D<0.25 mm Ignored

0.25 mm < D < 0.5 mm 4

0.5 mm < D 0

Touch panel white line Scratch

Size >= 5”


- W< 0.03 Ignored

L < 5.0 0.03 < W <0.05 2

- 0.05 < W 0


RVT101HVLNWC00-B


Item Criterion

Touch panel spot

Size < 5”


D < 0.2 mm Ignored

0.2 mm < D < 0.4 mm 5

0.4 mm < D < 0.5 mm 2

0.5 mm < D 0

Size >= 5”


D<0.25 mm Ignored

0.25 mm < D < 0.5 mm 4

0.5 mm < D 0

Touch panel white line Scratch

Size < 5”


- W< 0.02 Ignored

L < 3.0 0.02 < W <0.05 2

L < 2.5 0.05 < W <0.08

- 0.08 < W 0

Size >= 5”


- W< 0.03 Ignored

L < 5.0 0.03 < W <0.05 2

- 0.05 < W 0


RVT101HVLNWC00-B


RELIABILITY TEST

NO. TEST ITEM TEST CONDITION REMARK

1 High Temperature

Storage 80 °C/120hours Note 1

2 Low Temperature

Storage -30 °C/120hours Note 1

3 High Temperature

Operating 70 °C /120hours Note 1

4 Low Temperature

Operating -20 °C/120hours Note 1

5 High Temperature and

High Humidity 40 °C, 90 % RH/120 Hrs Note 1

6 Thermal Cycling Test

(No operation)

-20 for 30min, 70 for 30 min. 100 cycles. Then test

at room temperature after 1 hour Note 2

7 Vibration Test

(No operation)

Frequency :10~55 HZ; Stroke :1.5mm; Sweep:10HZ~55HZ~10HZ; 2hours for each direction of X, Y, Z(6 hours for total)

8 Package Drop Test Height:60 cm, 1 corner, 3 edges, 6 surfaces

10 ESD Test ± 2KV, Human body mode,100pF/1500Ω

Note 1:Sample quantity for each test item is 5~10pcs.

Note 2: Before cosmetic and function test, the product must have enough recovery time, at least 2

hours at room temperature.


RVT101HVLNWC00-B


LEGAL INFORMATION

Riverdi grants the guarantee for the proper operation of the goods for a period of 12 months from

the date of possession of the goods. If as a consequence of performing the obligation resulting from

this guarantee the customer received a good free of defect instead of the defective good, then the

period for the effectiveness of the guarantee shall commence anew from the moment the customer

receives the good free of defects. Information about device is the property of Riverdi and may be the

subject of patents pending or granted. It is not allowed to copy or disclosed this document without

prior written permission.

Riverdi endeavors to ensure that the all contained information in this document is correct but does

not accept liability for any error or omission. Riverdi products are in developing process and published

information may be not up to date. Riverdi reserves the right to update and makes changes to

Specifications or written material without prior notice at any time. It is important to check the current

position with Riverdi.

Images and graphics used in this document are only for illustrative the purpose. All images and graphics

are possible to be displayed on the range products of Riverdi, however the quality may vary. Riverdi is

no liable to the buyer or to any third party for any indirect, incidental, special, consequential, punitive

or exemplary damages (including without limitation lost profits, lost savings, or loss of business

opportunity) relating to any product, service provided or to be provided by Riverdi, or the use or

inability to use the same, even if Riverdi has been advised of the possibility of such damages.

Riverdi products are not fault tolerant nor designed, manufactured or intended for use or resale as on

line control equipment in hazardous environments requiring fail–safe performance, such as in the

operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct

life support machines or weapons systems in which the failure of the product could lead directly to

death, personal injury or severe physical or environmental damage (‘High-Risk Activities’). Riverdi and

its suppliers specifically disclaim any expressed or implied warranty of fitness for High-Risk Activities.

Using Riverdi products and devices in 'High-Risk Activities' and in any other application is entirely at

the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Riverdi from any and all

damages, claims or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise,

under any Riverdi intellectual property rights.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information: Riverdi:

RVT101HVLNWC00-B

https://www.mouser.com/riverdi

https://www.mouser.com/access/?pn=RVT101HVLNWC00-B

Documents

odule Specification