Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Office
LordoReal elasticity
ww
w.da
uphi
n-gr
oup.
com
2
LordoAn absolute top design with an innovative approach for suppor-ting the back using a transparent, pressure-regulating fabric which is elastic over its entire area and a simple, self-aligning lumbar support.
This is Lordo.
Des
ign:
Mart
in B
alle
ndat
3
MS LO 33575+ Armrests 103
4
Lordo
MS MS
Lordo is an attractive chair whichever way you look at it. Its elastic, pressure-regulating backrest maintains its transpa-rent and airy look at all times. What is so ingenious about Lordo is the clarity of its lines. It has an imposing appea-rance and yet is elastic and soft as soon as you sit back
in it. This is all thanks to its lightfast and flexible woven fa-bric. The fabric is made of polyester and has Lycra threads specially woven into it, available in black or light grey. Lordo is also available with comfortable upholstery cushion. The cushion is available in black or coloured leather.
Swivel chairTransparent and comfortable
LO 33575+ Armrests 072
LO 33575 + upholstery cushion in leather
5
6
MS
The woven backrest fabric consists of polyester and light-fast elastic Lycra threads and was specially developed for the Lordo chair. Thanks to this fabric, the backrest with its alternating black and transparent lines yields flexibly and adjusts to the user’s body form whilst regulating pressure. The effect produced is similar to what would happen if a number of rubber bands were pulled tight one above the
other and then connected together. With its high backrest, the Lordo executive chair offers a particularly high level of comfort. The neckrest area has the same elastic cushio-ning properties as the main backrest. This allows the back of your head to sink into it comfortably whilst remaining perfectly supported.
Swivel chair with neckrestImposing and modern
LO 33575+ Neckrest + Armrests 072
Lordo7
Thanks to its area-elastic support material, with its uphol-stered pads Lordo offers optimum seated comfort in all work postures. Lordo features the Motionflex-Synchron mechanism with a rapid adjustment of the backrest coun-terpressure, a seat-depth adjustment of 6 cm and a seat-tilt adjustment up to -5° as standard.
Swivel chair with comfortable upholstery pads
Lordo8
9
LordoFloating comfort
10
The Lordo cantilever and conference chair have also been created to match the Lordo swivel chairs. The backrests which were deliberately designed in accordance with the form-follows-function principle are harmoniously combined with a cylindrical armrest profile on a classic round tubular frame. The light and airy backrest appears to be floating, as the seat and backrest of the chair are not directly con-nected to each other. The elastic, transparent fabric em-
phasises this pleasant effect (alternatively available with upholstery cushion). The Lordo cantilever chair is available with an attractive, stackable frame. A smooth underseat shell protects the upholstery when a number of chairs are stacked one on top of the other. The conference swivel chair is height-adjustable and available with transparent „stripe design“ mesh or with upholstery cushion, with gli-des or on castors.
LO 33560 001stackable
LO 33560 001+ upholstery cushion in leather
LO 33500 001 LO 33500 001 + upholstery cushion in leather
11
LO 33575 + Armrests 072
MS
Options
Lordo12
The depth of the seat can also be adjusted while sitting, using a flat button located on the underside of the seat. The user can make the most of the large adjustment range (6 cm) because the seat is able to slide beneath the tensi-oned backrest cover. This makes it possible to reduce the seat area and select either a very large or very small seat depth. Users can therefore adjust the chair to suit their individual body size and preferred posture when sitting.
The armrests are height- and width-adjustable. The armrest pads are pleasently soft to the touch.
The swing-mounted lordosis segment on the backrest fea-tures a separate tensioned cover. By tilting with respect to the backrest frame, it complements the elasticity of the fabric itself. As a result, this area adjusts optimally to the movements of the person sitting and has a mobilising ef-fect on the lumbar spine. The segment ideally supports and harmonises with the elastic, pressure-regulating effect of the entire backrest.
The backrest has a 10 cm height-adjustment range. The telescopic shanks on both sides of the backrest frame can easily be grasped from the seated position and are adjusted using attractive chrome buttons. The adjustment buttons on the backrest match those on the armrests per-fectly from a design point of view.
The woven backrest fabric consists of polyester and light-fast elastic Lycra threads and was specially developed for the Lordo chair. Thanks to this fabric, the backrest with its alternating black (optionally light grey) and transparent lines yields flexibly and adjusts to the user’s body form whilst re-gulating pressure. The effect produced is similar to what would happen if a number of rubber bands were pulled tight one above the other and then connected together.
The armrests 103 are made of polished die-cast aluminium and feature soft-touch armpads.
13
MS LO 33575+ Armrests 072+ Neckrest
Tensioned elastic neckrest.
Air-comfort backrest offering support for the back thanks to a tensioned elastic fabric which is breathable and regulates pressure.
Tilting, self-aligning lumbar support, moves backwards and forwards in response to axial body movements.
Backrest height-adjustment feature (10 cm), can be operated in a sitting position using the buttons on either side.
Side-mounted spring-force ad-justment: rapid adjustment of the counterpressure with just a few turns while sitting
Polished aluminium base (optional) with large, easy-run double castors (standard: plastic base).
Armrests: height- (7 cm) and width-adjustable (each side 2.5 cm) with soft PU armpads
Motionflex-Synchron mechanism: can be locked in 4 positions, seat-tilt adjustment up to –5° as standard
Seat-depth adjustment: 6 cm by using a sliding seat which can be locked in 6 positions
Infinite seat-height adjustment (40-51 cm) with safety gas unit
Technical features
Lordo14
2.5 cm
7 cm
Armrests 072 (2F, PU)
Armrests 103 (fixed)
Base black plastic, with big castors (Ø 65 mm); standard
Base polished aluminium, with big castors (Ø 65 mm); option
Upholstered cushion covered with leather (black/coloured) 66336 Lordosis segment66335 Middle backrest segment66337 Neckrest segment
Upholstered cushion covered with leather (black/coloured) 66338 Backrest segment
Bases Leather cushion
Web K 4310 Black Transparent “stripe design” mesh
MeshArmrests
Web K 4312 Light grey Transparent “stripe design” mesh
52
57
– 6
7
4669
40
– 5
16
0 –
78
97
– 1
18
45 – 51
69
58
45
88
45
45
43 6
7
43
61
70
46
87
– 9
5
46
41
– 4
96
6 –
74
40
70
47
52
57
– 6
7
4669
40
– 5
1
97
– 1
18
69
45 – 51 52
79
– 8
9
4670
40
– 5
16
0 –
78
11
9 –
14
0
45 – 51
70
MSMS MSLO 33575 072LO 33575
LO 33500 001
LO 33575 072+ Neckrest
LO 33560 001 stackable
52
57 –
67
4670
97 –
118
40 –
51
65 –
76
45 – 51
70
MS LO 33575 103
15
Lordo
Dauphin HumanDesign®Group
Distribution:
Dauphin HumanDesign® Group GmbH & Co. KG
Manufacturer:
Bürositzmöbelfabrik Friedrich-W. Dauphin GmbH & Co. or approved partner
[email protected]+49 (0) 91 58 - 17- 0
Tel.
+49 (0) 91 58 - 17- 7 00
[email protected]ße 36 D 91238 Offenhausen
Espanstraße 29 D 91238 Offenhausen
Dauphin HumanDesign® Center international:
Dauphin HumanDesign® Australia Pty. Ltd. +61 410 47 56 12 [email protected] 2 Maas Street CROMER NSW 2099 / Australia
www.dauphin-group.com
Your stockist
10 1
87 0
1 0
4/1
3 3
4
D
iffer
ence
s in
col
our,
erro
rs a
nd m
odifi
catio
ns e
xcep
ted.