Oilfield Industry - Shaw's Enterprisesshawsent.com/wp-content/uploads/2012/12/crosby_Land_Based_Oilfie… · Oilfield Tubing Blocks ... • Standard top coat finish is safety orange

Land BasedOilfield Industry

Products

Crosby®

McKissick®

Lebus®

National®

2 www.thecrosbygroup.com

80 Series Replacement Hook

• Capacitiesavailable:–17”through30”(432-762mm)sheaveswith7/8”through1-1/8”(22-28mm)wirelinesizes.

–50Tonthrough150TonWorkingLoadLimits(45-135MetricTonsWorkingLoadLimit).

• ExclusiveE-Zopeningguards,noboltstopulloutandlose.Featuregivesfastestpossibleexposureofsheaveclusterforquickreeving.

• Extremelyshortoveralllength,extraweight,excellentbalanceforfastnon-wobblingfalls.

• Extralargesealedsheavebearingdiametersforfullyratedcapacities.

• Taperedrollerthrustbearinginhook.

• Duplexhookforeasyelevatoroperation,locksinsixoreightpositions.

• Convenientrodhookclevisavailable.

• Completelystreamlined,noprojections.

• McKissick®Roll-Forged™,flame-hardenedsheaves,groovedforproperwirelinesize.

• Threadedhookpartsprecisionmachinedandindividuallyfittedformaximumperformance.

• Allblocksavailablewithadditionalcheekweights.

FeaturingpatentedMcKissickSplit-Nut®RetentionSystem.

• Revolutionarynewretentionsystemeliminatesconventionalthreadednutandproblemsassociatedwiththreadcorrosion.

• FatigueRated.

• DesignallowsforeasyinspectionasrequiredbyAPIRP-8B.

• Easyfieldassembly/disassembly.

• Allowsrepeatedinstallationandremovalswithoutriskofdamagetohook/nutinterface.

• Redundantsecuredandsealedfasteners.

• Canbepurchasedinavarietyofconfigurationsthatcanbeusedtoretro-fitexistingMcKissick®80SeriesTubingblocks–inthefieldorintheshop.–Hookandnutassemblythatfitsexistingcases.–Hookandcaseassemblythatboltsintoexistingblock.

70 SeriesSpring Loaded

80 SeriesUtilizes Patented

McKissick Split-Nut® Retention System

Oilfield Tubing Blocks

®

3www.thecrosbygroup.com

RJ Style Drilling Blocks

RP Style Traveling Blocks

• Capacitiesavailable:–30”,36”and42”sheaveswith1-1/8”and1-1/4”wirelinesizes.(762,914,1067mmsheaveswith28and32mmwirelinesizes.)

–150,250and350TonWorkingLoadLimits.(146,227and318MetricTonWorkingLoadLimits.)

• Doublerow,pre-adjustedtaperedbearingswithseals.• BlockscontainMcKissick®Roll-Forged™sheaveswithflamehardenedgrooves.

–GroovesareAPIprofile.• Separatelubricationchanneltoeachsheave.• Easyopeningguardsforquickstring-up(noboltstopulloutandlose).• Eachhookblockisfittedwithpositionlockandswivellockassemblies.• Additionalweightsavailableuponrequest.• ManufacturedtotherequirementsofAPI8C,includingalldocumentation.

–Eachblockisindividuallyserializedforfulltraceability.–FurnishedwithCertificateofConformance.

• McKissick®heavydutycastalloyhookisspringloadedwithhydraulicsnubber.• Minimumdesigntemperatureof-20°C(-4°F).• Standardtopcoatfinishissafetyorangeenamel.

–Otherpaintcolorsandsystemsareavailableonrequest.–Individualpartsareprimercoatedonexposedsurfaces.

• CombinationhookblockshaveinterchangeablepartswithBJtypeMcKissick®blocksbuiltupto1982.–ContactCrosby®CustomerServicefordetails.

• CapacitiesAvailable:–60”and72”sheaveswith1-3/8”through1-3/4”wirelinesizes.(1524and1829mmsheaveswith35through44mmwirelinesizes.)

–500Ton,750Tonand1000TonWorkingLoadLimits.• Doublerow,pre-adjustedtaperedbearingswithseals.• BlockscontainMcKissick®Roll-Forged™sheaveswithflamehardenedgrooves.

–GroovesareAPIprofile.• Separatelubricationchanneltoeachsheave.• Easyopeningguardsforquickstring-up(noboltstopulloutandlose).• Baildesigntoadapttocomparablecapacitydrillingequipment.• Additionalweightsavailableuponrequest.• ManufacturedtotherequirementsofAPI8C,includingalldocumentation.

–Eachblockisindividuallyserializedforfulltraceability.–FurnishedwithCertificateofConformance.

• Minimumdesigntemperatureof-20°C(-4°F).• Standardtopcoatfinishissafetyorangeenamel.

–Otherpaintcolorsandsystemsareavailableonrequest.–Individualpartsareprimercoatedonexposedsurfaces.

• Blocksideplatescanbedrilledtoadaptcustomersuppliedequipment.

®

868, 869 and 870 Series

Drilling Blocks


SnatchBlocksareavailableinafullrangeofsizesandstylestoensurethattheappropriateblockisavailableforyourspecificapplication.

418, 419 & 404 Light Champion• Hook,ShackleandTailboardstyles.• 3”through18”sheaveswith5/16”through1”(8-26mm)wirelinesizes.• 2tthrough15tWorkingLoadLimits.

408 & 409 Light Champion Double Sheave• HookandShacklestyles.• 4-1/2”through14”sheaveswith3/8”through3/4”(10-19mm)wirelinesizes.• 4tand12tWorkingLoadLimits.

420, 421 & 406 Champion• Hook,ShackleandTailboardstyles.• 6”through10”sheaveswith3/4”through7/8”(19-22mm)dualrated

wirelinegroove.• 12tand15tWorkingLoadLimits.

434, 435 & 401 All AlloyFeaturingnew60tmodelsforginpoletruckapplications.• Hook,ShackleandTailboardstyles.• Entireblockmadefromheattreatedalloysteelforreducedweight.• Availablewithbronzebushedorrollerbearingsheaves.

430, 431 & 407 Super Champion• Hook,ShackleandTailboardstyles.• 8”through24”sheaveswith1”through1-1/4”(26-32mm)wirelinesizes.• 20tthrough30tWorkingLoadLimits.

416, 417 & 402 All Alloy• Hook,ShackleandTailboardstyles.• 6”through10”(152-254mm)sheaveswith3/4”through7/8”

(19-22mm)dualratedwirelinegroove.• 12tWorkingLoadLimit.

L-160 Lebus Heavy Duty• Hook,ShackleandTailboardstyles.• 5”and5-7/8”(127-149mm)sheaveswith3/8”through3/4”

(10-19mm)wirelinesizes.• 6tand12tWorkingLoadLimits.

L-170 Lebus General Purpose• Hook,ShackleandTailboardstyles.• 4-1/8”(105mm)sheavewith3/8”-1/2”(10-13mm)dualratedwire

linegroove.• 5tWorkingLoadLimit.

Snatch Blocks

High Capacity Snatch Blocksfor Gin Pole Applications

®


Crosby® QUIC-CHECK® Inspection and Identification System

NewdesignprovidesthedependabilityofstandardMcKissick®snatchblocks,alongwithfeaturesthatmakeitperfectforthechallengingneedsofTuggerHoistapplications.• Awidevarietyofconfigurations:

–4,8,12,15,25and30tWorkingLoadLimits.–3/8”through1”(10-32mm)wirelinesizes.–Paintedorgalvanizedfinish.

• 8”&10”blocksfurnishedwithdualratedwirelinesheaves.• Recessedsideplatedesignreducesthegapbetweenthesheaverimandtheside

plate,andallowsthesheaveassemblytobecapturedintheblockiflossofcenterpinoccurs.

• Sheavelubricationthroughcenterpinforeasymaintenance.• Sealedtaperedrollerbearingsextendthelifeofthecenterpinandbearings,and

allowsforfasterlinespeedsthanrecommendedwithstandardsnatchblocks.• Shacklefittingswivelsforeasypositioning.• Suitableforhoistingpersonnel,contingentuponallemployees,includingthewinch

operator,beingtrainedtofollowanyapplicablefederal,localandindustrystandards.–Tugger/Derrickapplications:APIRP54.

• Holesthroughsideplatesareavailableforsecondaryblocksecurementdevice.• Designfactorof4to1.

An innovative software system, featuring RFID technology, that provides a streamlined and automated approach to the inspection process.BenefitsoftheQUIC-CHECK®RFIDinspectionsysteminclude:• DevelopedinaccordancewithASMEB30.9and

B30.26inspectioncriteria.• Efficient,accurateandtimelyinspections.

–Eliminateshandwritingofinformation.• Inspectionsupportmaterialavailable.

–Providesinstantreferencetoproductspecificinspectioninformation.

• InspectionHistory–CradletoGrave.• Reducesinspectioncost.• Accurateandtimelyinspectionreports.Inadditiontoinspectionofchain,wireropeandroundslings,agrowingnumberofCrosbyproductsareRFID EQUIPPED.

M-491 Derrick Hoist Blocks for Tugger Applications

Crosby®

Red-Pin®

Shackles

CrosbyIP®

LiftingClamps

Crosby®

Clamp-CoLiftingClamps

Crosby®

Eliminator

Crosby®

HoistRings

McKissick®

Blocks

®


Floor Blocks & Top Blocks • Alloyaluminumhousingformaximumstrengthand

minimumweight.• ConductorcableONLYisrecommendedforusewithWell

Logger’sBlocks.• Foruseinhighspeedapplicationssuchaswelllogging,

perforating,etc.• Extralargedoublerow,pre-adjustedsealedtaperedbearing.• Quickopeningpinforfaststring-up,lightweightfor

easyhandling.

Hay Fork Pulleys with Swivel Hook or Swivel Eye • Forgedsteeleyesandhooks.• Availablepaintedorzincplated.• Onepiecepressedsteelshells.• Edgeswellroundedtopreventchaffingofrope.• CanbefurnishedwithS-4320hooklatch.• Furnishedwithrollerbearings.• Pressurelubefittings.

Tong Blocks • Steelsheaveswithroller

bearingsandpressurelubrication.

• Forgedsteeleyesandhooks.

• Easyopeningfeatureshownavailablein8”(203mm)sizeonly.

Lay Down Blocks • Allsteelconstruction,steelsheavesmountedon

antifrictionbearings,groovedformaximumof3/4”(19mm)wireline.

• Usedtolaydowndrillpipe.• Hookmadetofitintoendofdrillpipe,handydead

endbecketforreturningblock.–hookshavehandlefordisengagement.

Crown Blocks • McKissick®Roll-Forged™sheaveswithflamehardenedgrooves.• Doublerowpre-adjustedsealedtaperedbearingsmountedonasteelshaft.• Heavycenterandsideplatesforpropersupportofcenterpin.• Pre-assembledunitsforrapidattachmenttocrownassemblyforinstallationonderrick.• Onmultiplesheaveassemblies,onesheavecanbegroovedforsandlineonrequest.• Othersizesavailableuponrequest.

Guy Line Blocks • Usedonguy-linestogainmechanicaladvantagethroughrapidtake-up,taking

lesspulltoguydown.• Steelplates,steelpins,6”steelsheaves.

Oilfield Service Blocks

Special Application Blocks

Well Logger’s Blocks475

HF-1 HF-2

171 443

731

477 476

®


Roll-Forged™ SheavesAmerican Petroleum Institute McKissick®ProductshavebeenlicensedbytheAmericanPetroleumInstitutetomanufactureRoll-Forged™SheavesunderAPIspecifications8A&8C.APIsheavesmustmeetthecriteriaestablishedbytheAmericanPetroleumInstitutefordrillingandproductionhoistingequipment.Typicaloilfieldapplicationsinclude:•DrillingRigs •WorkingUnits •MotionCompensationApplications•TubingBlocks •TravelingBlocks •RiserTensioners •CrownBlockUnits

Full Range of Standard Sheave Sizes McKissick®Roll-Forged™sheavesareavailableinafullrangeofsizesfrom12inchesto78inches(305-1981mm),andbearingstylesandpricesthatbestfityourapplication.CrosbyalsomanufacturescustomMcKissicksheavesandcanmakeminormodificationstostandardsheavesasneededforspecialapplications.

Flame Hardened Groove Crosby’shardeningtechniqueisascience.Itprovidesaprecisemaximumhardnessforwear-resistanceacrossthewireropecontactarea.TheMcKissicksheavegrooveisflamehardenedtoaminimum35RockwellCfora140°contactareawiththewirerope(uponspecialrequesttheMcKissicksheavegroovecanbeflamehardenedtoaminimum50rockwellCfora150°contactareawiththewirerope).Thesolidsteelplateprovidestheidealsurfaceforflamehardeningandaclosertolerancefittothewireropetoreducefatigueandwear.

Closed Die Upset and Roll-Forged™ – Not Split Upsettingandrollforgingformsthegrooveandflangewallsinmultiplesteps,eliminatingtheneedtosplitandweakenthegroove.Thisexclusiveforgingprocessaddsextrastrengthtothecriticalgroovesection.YoucancountonaMcKissick®sheavetogivemaximumlifeperformance,becauseit’sforgedtodistributethewireropeforcesevenlyoveranaccuratelyformedloadsurface.Plus,uniformityoftherollforgedgrooveaddslongerwireropelife.

Solid Steel – No Castings EveryMcKissick®sheavestartsasasinglepieceofsolidcarbonsteelplate.It’sflame-cutfromcloselycheckedstock,sothere’snoinherentweb/rimflawasyoufindincastsheaves.There’sbetterbalanceandbetterdistributionofforceswithaMcKissickRoll-Forged™sheavetoo.Castingcanresultingroovewallvariations–eithertoothickortoothin–causingunevenstressesandearlyfailure.

Bearing Selection to Match Your Job Requirement StandardMcKissick®Roll-Forged™sheavesareavailableinthefollowingconfigurations:•PlainBore •BronzeBushing •TaperedRollerBearing •RollerBearingwithThrustWasher•KeyWays •SetScrews •LubricationthruHub •FullComplementCylindricalRollerBearing

McKissick®manufacturesallRoll-Forged™sheavestominimalAPISpecificationsforgeneraluseinhoistingandwireropeguideapplications.

Stepped Hub Design Proves Better TheMcKissick®hubissteppedtoeliminatestressfailureintheweld,commonintraditionalhubdesigns.Thehubispressedintoplacewithcompletemetal-to-metalcontact.Thishelpsensureanaccuratealignmenttothehub’saxissothereisnowobbleorloppingoftherotatingsheave.Theprecisionalignedhub/sheavewheelcombinationaddstothebearinglifeandkeepsthesheaveonthejoblonger.

®


Shackles

COLD TUFF® Shackles• Forged–QuenchedandTempered,withalloybolt.

G-2130CT–CarbonSteel/G-2140CT–AlloySteel• WorkingLoadLimitpermanentlyshownonevery

shackle.• Individuallyserializedwithcertification.• FatigueRated(G-2130CTonly).• Allsizesareindividuallyprooftestedto2.0timesthe

WorkingLoadLimit.• Finishisinorganiczincprimerorhotdipped

galvanized.• Bowandboltarecertifiedtomeetcharpyimpact

testingof31ft-lbs.min.ave.at-4°F.• Individuallymaginspectedwith

certification.• Typeapprovalandcertificationin

accordancewithDNVSpecification2.7-1OffshoreContainersandDNVrulesforLiftingAppliances–LooseGear.

• COLDTUFF®shacklesaresuitableforuseat-50°F.

Screw Pin ShacklesScrewPinShacklescanbeusedinanyapplicationwherearoundpinshackleisused.Inaddition,screwpinshacklescanbeusedforapplicationsinvolvingside-loadingcircumstances.Reducedworkingloadlimitsarerequiredforside-loadingapplications.Whileinservice,donotallowthescrewpintoberotatedbyaliveline,suchasachokerapplication.

AllCrosby®Shackles,exceptforG-2160’s,incorporatemarkingsforgedintotheproductwhichaddressaneasyQUIC-CHECK®feature.Angleindicatorsareforgedintotheshacklebowat45°anglesfromvertical.Theseareutilizedtoquicklychecktheapproximateangleofatwo-leggedhitchorquicklychecktheangleofasingleleghitchwhentheshacklepinissecuredandthepulloftheloadisoffverticalorsideloaded,thusrequiringareductionintheworkingloadlimitoftheshackle.

MAXTOUGH®isaregisteredCrosby®trademarkidentifyingproductsthatarestatisticallyverifiedtomeetorexceedimpactvaluesof31ft-lbs.at-4°Fbasedonahighlevelofconfidence.Aconfidencelevelisanindexofcertainty.MAXTOUGH®isanotherValue-AddedbenefitofTheCrosby®Group.

Themechanicalpropertiesofsteel,whenaloadisveryrapidlyapplied,isknownasitsimpactstrength.Impacttestsaremadebyapplyingasuddenloadtoatestpieceandmeasuringtheenergyabsorbedwhenthespecimenbreaks.The“tougher”thematerialthegreatertheenergyrequiredtobreakthepiece.Abrittlepiececanabsorbvirtuallynoenergyuponbreaking.TheCharpyVNotchedImpacttestisonecommonmethodofperformingthetestingandmeasurement.Fittingsmustbeabletohaveimpactstrengthsthatmatchtherequirementsoftheirapplicationatalltemperatures,evenlowtemperaturescommonlyfoundinwinterconditions.Thedifficultyofcrackinitiationandcrackgrowthunderimpactisanimportantconsideration.

MAXTOUGH®productsarestatisticallyverifiedtomeetorexceedspecificimpactvalues.SampleheatsofsteelareCharpyimpacttestedandstatisticallyverifiedthatthematerialmeetsorexceedsimpactvaluesof31ft.-lbs.at-4°F,basedonahighlevelofconfidence.Thesetestsareconductedonanongoingbasis.

G-209A2t-21t

G-2130S-21301/3t-150t

G-2150S-21501/2t-85t

G-2130CT G-2140CT1/2t-85t

G-2140S-214030t-400t

G-21607t-1550t

G-209S-2091/3t-55t

G-210S-210

1/2t-55t

Bolt Type ShacklesBolt-TypeShacklescanbeusedinanyapplicationwhereroundpinorscrewpinshacklesareused.Inaddition,theyarerecommendedforpermanentorlongterminstallationsandwheretheloadmayslideontheshacklepincausingthepintorotate.

®


Wire Rope Clips

Eye Hooks

SHUR-LOC Swivel Hooks

G-450 Red U-Bolt Clips• Availableinsizesfrom1/8”through3-1/2”(3-90mm).• EachbasehasaProductIdentificationCode

(PIC)formaterialtraceability,thenameCROSBY®or“CG”,andasizeforgedintoit.

• Entireclip–galvanizedtoresistcorrosiveandrustingaction.

• Clipsizesupthrough1-1/2”(38mm)haverolledthreads.

• LookfortheRed-UBolt®,yourassuranceofGenuineCrosby®Clips.

All Crosby® 320 Eye Hoist Hooks feature:• Availableincarbonsteelandalloysteel.

-Carbonhooksdesignedwitha5:1DesignFactor.-Alloyhooksdesignedwitha4.5:1DesignFactor.

• ChemicalanalysisandtensiletestsperformedoneachPICtoverifychemistryandmechanicalproperties.

• Properdesign,carefulforgingandprecisioncontrolledquenchedandtemperinggivemaximumstrengthwithoutexcessiveweightandbulk.

• EveryCrosby®EyeHookhasapre-drilledcamwhichcanbeequippedwithalatch.Evenyearsafterpurchaseoftheoriginalhook,latchassembliescanbeadded.

• Eyehooksareloadrated.• Hoisthooksincorporatetwotypesofstrategically

placedmarkingsforgedintotheproductwhichaddresstwo(2)QUIC-CHECK®features:-DeformationIndicators-AngleIndicators

Additional Features of Crosby® S-320N Eye Hoist Hooks:• Fatigueratedat1-1/2timestheWorking

LoadLimitat20,000cycles.• Canbeprooftestedto2-1/2timesthe

WorkingLoadLimit.• CanbeMetricRatedat5:1DesignFactor.• Lowprofilehooktip.• Newintegratedlatch(S-4320)meetsthe

Worldclassstandardforlifting.• Heavydutystampedlatchinterlockswith

thehooktip.• Highcycle,longlifespring.• Whensecuredwithpropercotterpinthroughthehole

inthetipofhook,meetstheintentofOSHARule1926.550(g)forpersonnelhoisting.

• ForgedAlloySteel–QuenchedandTempered.• IndividuallyProofTestedat2-1/2timestheWorkingLoadLimitwithcertification.• PositiveLockLatchisSelf-Lockingwhenhookisloaded.• RatedforbothWireropeandGrade8Chain.• G-414HeavyThimbleshouldbeusedwithwireropeslings.• TriggerrepairKitavailable(S-4316).Consistsofspring,rollpinandtrigger.• S-3326SwivelHookutilizesanti-frictionbearingdesignwhichallowshooktorotate

freelyunderload.• Fatiguerated.• TheSHUR-LOC®hook,ifproperlyinstalledandlocked,canbeusedforpersonnel

liftingapplications,andmeetstheintentofOSHARule1926.550(g)(4)(iv)(B).• “LookforthePlatinumColor–CrosbyGrade

100AlloyProducts.”• U.S.Patent5,381,650andforeignequivalents.

G-429 Fist Grip Clips• Availableinsizesfrom3/16”through1-1/2”

(5-40mm).• Entireclipisgalvanizedtoresist

corrosiveandrustingaction.• Boltsareanintegralpartofthesaddle.

Nutscanbeinstalledinsuchawayastoenabletheoperatortoswingthewrenchinafullarcforfastinstallation.

• Allsizeshaveforgedsteelsaddles.• Assembledwithstandardheavy

hexnuts.

3/16” - 5/8”(5 - 16mm)

3/4” - 1-1/2”(18 - 40mm)

®

S-1326ASuitableforinfrequent,

non-continuousrotation

underload

S-13326Suitableforfrequentrotation

underload

S-320CS-320A

20tCarbon-60tAlloy

S-320CN S-320AN

3/4tCarbon-22tAlloy


®

Crosby® Spelter Sockets

WIRELOCK® Resin

Crosby® Turnbuckles

Open and Closed Spelter Sockets• ForgedSteelSocketsthru1-1/2”(38mm),castalloysteel1-5/8”thru4”

(40-102mm).• Speltersocketterminationshaveanefficiencyratingof100%,basedon

thecatalogstrengthofwirerope.Ratingsarebasedonrecommendedusewith6x7,6x19,or6x37,IPSorXIP(EIP),XXIP(EEIP),RRL,FC,orIWRCwirerope.

Turnbuckle assembly combinations include: Eye and Eye, Hook and Hook, Hook and Eye, Jaw and Jaw, Jaw and Eye.• EndfittingsareQuenchedandTempered,bodiesheattreatedbynormalizing.• HotDipgalvanized.• ModifiedUNJthreadonendfittingsforimprovedfatigueproperties.• BodyhasUNCthreads.• Turnbuckleeyesareforgedelongated,bydesign,tomaximizeeasyattachmentin

systemandminimizestressintheeye.• Forturnbucklesizes1/4”through2-1/2”(6-64mm),ashackleonesizesmaller

canbereevedthrougheye.• Forgedjawendsarefittedwithboltsandnutsonsizes1/4”through5/8”(6.35-

15.9mm)andpinsandcottersonsizes3/4”through2-3/4”(19.1-70.0mm).• Turnbucklesrecommendedforstraightorin-linepullonly.• LockNutsavailableforallsizes.• CrosbyproductsmeetorexceedalltherequirementsofASMEB30.26

includingidentification,ductility,designfactor,proofloadandtemperaturerequirements.Importantly,Crosbyproductsmeetothercriticalperformancerequirementsincludingfatiguelife,impactpropertiesandmaterialtraceability,notaddressedbyASMEB30.26.

For use on 416 & 417 Spelter Sockets• 100%terminationefficiency.• Temperatureoperatingrangeis-65Fto+240F(-54°Cto116°C).• Idealforonsiteapplications.• Nohazardousmoltenmetal.• Improvedfatiguelife.• Pouringtemperaturewithoutboosterpackis48Fto110F(6.67°Cto43.3°C).• Oneboosterpackifpouringtemperatureis35Fto48F(1.67°Cto8.89°C).• Twoboosterpacksifpouringtemperatureis27Fto35F(-2.78°Cto1.67°C).• RefertoWIRELOCK®TechnicalManualformoreinformation.

G-416 / S-416Spelter Sockets

G-417 / S-417Closed

Spelter Sockets


Load Binders

Chain and Accessories

L-140 Ratchet Type Load Binders• Upgradedforusewithgrades70,80and100chain.• UtilizesstandardCrosby®A-323AlloyEye

GrabHooks.• Newdesign“onepiece”forgedhandle.• Continuoustake-upfeatureprovidesfinite

adjustmenttotiedownload.• Ratchetspringrustproofed.• Allloadbearingorholding

partsforged.• Easyoperatingpositiveratchet.

Crosby®suppliescarbonchaininGrades30,40&70,inadditiontoalloychaininthefollowingsizesandcapacities.

Spectrum 8® Alloy Chain (Grade 80)–Sizes:1/4”through1-1/4”(6-32mm).–WLL:3,500lbs.through34,200lbs.(1.12-31.5t).

Spectrum 10® Alloy Chain (Grade 100)–Sizes:1/4”through1”(7-26mm).–WLL:4,300lbs.through59,700lbs.(2-26.5t).

Crosby®manufacturesafulllineoffittingsforusewithalloychain,includingthenewCrosbyELIMINATOR®,whichcombinesselectedfeaturesandfunctionalityofamasterlink,connectinglink,grabhookandadjusterlegstoprovideyouwithonefittingthatissuitableforapplicationsthatrequireanadjustablelengthchainsling.

A-1W Walking Load Binders• Forgedsteel-QuenchedandTempered.• Usedasacome-a-longforshorttake-up

onchain.• Bindertogglesawayfromtheload.

L-150 Standard Lever Type Load Binders• Extraheavyconstructionatleveragepoint

topreventspreading.Heelofbindertogglesawayfromload,permittingeasyrelease.

• Ballandsocketswiveljointsathookassembliespermitastraightlinepull.

7-12 & A-12 Snubbing Load Binders• Forgedsteel-Quenchedand

Tempered.• Springcushionforloadprotection,

cushionsshockandsway.• Bindertogglesawayfromload.

A-1355 Chain Choker Hook• ForusewithS-1325ACouplerLink

forchokeapplicationssuchaspipebundling.

• Forgedalloysteel-QuenchedandTempered.

• Individuallyprooftestedwithcertification.• EachhookhasaProductIdentificationCode(PIC)

formaterialtraceability,alongwiththesizeandthenameCrosby®&U.S.A.inraisedletters.

• Fatigueratedat1-1/2timestheWorkingLoadLimitat20,000cycles.

• •“LookforthePlatinumColor–Crosby®Grade100AlloyProducts.”

L-180 Winchline Tail Chains• HooksareForged–QuenchedandTempered.• Individuallyprooftested.• Spectrum4®HighTestedCarbonSteelfrom5/16”

through5/8”(8-32mm).• Spectrum8®AlloySteelfrom3/4”through1-1/4”.• MeetsorexceedsrequirementsofUSDOT

FMCSAPart393SubpartI.

The Crosby Group LLC offers rigging seminars and support materials for the Crosby product line. Crosby does not charge our product users for training.

What types of training does Crosby offer?• 4 and 8 hour rigging seminars at product users’ facilities.• Two Day Rigging Trainer Development courses in selective cities nationwide.• Computer based training utilizing CD/DVD’s.• Customized training for oilfield, offshore, manufacturing and construction markets.• Training on proper application and inspection of crane blocks, sheaves and overhaul balls.• Training on proper application and inspection of lifting clamps.• Specialized training on “Heavy Lift” and various special topics.

How do I contact Crosby in regards to training or training materials?By phone: Call 918-834-4611, ext. 235. If busy, please contact ext. 357.

By email: Seminar schedules for the two day Rigging Trainer Development courses can be downloaded from the Crosby website at www.thecrosbygroup.com and emailed to [email protected].

Crosby® Training Information

Crosby® USAP.O.Box3128

Tulsa,OK74101-3128P:(918)834-4611F:(918)832-0940

email:[email protected]

Crosby® Canada145HeartLakeRd.

Brampton,Ontario,CanadaL6W3K3P:(905)451-9261F:(877)260-5106


Crosby® EuropeIndustrieparkZonebN˚262220Heist-op-den-Berg

BelgiumP:(+32)(0)15757125F:(+32)(0)15753764


9999315 Copyright © 2011 The Crosby Group LLCAll Rights Reserved

Documents

Oilfield Industry - Shaw's Enterprisesshawsent.com/wp-content/uploads/2012/12/crosby_Land_Based_Oilfie… · Oilfield Tubing Blocks ... • Standard top coat finish is safety orange