Upload
hoangcong
View
217
Download
2
Embed Size (px)
Citation preview
Document No: 16178-901
Revision: A
Status: Information
Prepared By: S. Cribb
Reviewed By: D. Fletcher
Date 18/11/16
This document must be reproduced in colour to ensure clarity.
Copyright 2016. This document, including the conceptual content thereof and any specifications and particulars thereto, is an integral part of the intellectual property of McAlpine Marine Design Pty Ltd. This document is not to be reproduced or copied, in whole or in part or loaned or otherwise communicated to any third party or used in any manner detrimental to the interests of McAlpine Marine Design Pty Ltd without said company’s express consent. Acceptance of this document shall be construed as agreement to comply with the aforesaid terms and conditions.
6/11 Sainsbury Rd +61 (0)8 9337 5672
O’Connor [email protected]
Western Australia 6163 www.mmd.net.au
Old Salt Perth Pty Ltd
Entertainment Barge
Feasibility Report
Project: Entertainment Barge Feasibility Report Document: 16178-901
Client: Old Salt Perth Pty Ltd Revision A
Page i
I. DOCUMENT CHANGE CONTROL
Revisions made to this document.
Revision Date of Issue Author Brief Description of change
A 18/11/16 S.C. Original Issue
I. COMPANY DRAWINGS
Ref. Model No. Rev Brief Description
A1 16178-900 A Preliminary Mooring Arrangement
II. SUPPLIED DRAWINGS
Ref. Dwg. No. Rev Title
B1 G-100-01 1 36.5m General Arrangement
B2 CLK-16-244 2 Equipment Layout Plan
III. SUPPLIED DOCUMENTS
Ref. Doc. No. Rev Title
C1 - - Old Salt Perth (PowerPoint presentation)
C2 - - SludgeHammer – Party Barge Conceptual Design
IV. RULES, CODES, STANDARDS AND REGULATIONS
Ref. Publisher Code Year Title
D1 AMSA - 2016 National Standard for Commercial Vessels
D2 Standards Australia
AS1170.2:2011 2011 Structural design actions Part 2 Wind Actions
D3 British
Standards BS 6349:Part 6 1989
British Standard Code of practice for maritime structures; Part 6. Design of inshore moorings and floating structures
D4 DNV DNV-OS-E301 2010 DNV Offshore Standard; Position Mooring
D5 API API RP 2SK 2005 Design and Analysis of Stationkeeping Systems for Floating Structures
D6 Vryhof Anchors - 2010 Anchor Manual 2010 – The Guide to Anchoring
D7 NCEL TDS 83-08R 1987 Drag Embedment Anchors for Navy Moorings
D8 AMSA AMSA EX2 2016 Marine Safety (Certificates of survey) Exemption 2016
V. ACRONYMS
ABS American Bureau of Shipping
AMSA Australian Maritime Safety Authority
DCV Domestic Commercial Vessel
MED2 Marine Engine Driver Grade 2 NC
NC Near Coastal
NSAMS National Standard for the Administration of Marine Safety
NSCV National Standard for Commercial Vessels
SHHP Super High Holding Power
SMS Safety Management System
Project: Entertainment Barge Feasibility Report Document: 16178-901
Client: Old Salt Perth Pty Ltd Revision A
Page ii
CONTENTS
I. DOCUMENT CHANGE CONTROL .............................................................................................................. I
I. COMPANY DRAWINGS ............................................................................................................................... I
II. SUPPLIED DRAWINGS ............................................................................................................................... I
III. SUPPLIED DOCUMENTS ............................................................................................................................ I
IV. RULES, CODES, STANDARDS AND REGULATIONS............................................................................... I
V. ACRONYMS .................................................................................................................................................. I
1 INTRODUCTION .......................................................................................................................................... 1
2 SUMMARY ................................................................................................................................................... 1
2.1 SURVEY .................................................................................................................................................. 1
2.2 BARGE .................................................................................................................................................... 1
2.3 MANNING ................................................................................................................................................ 1
2.4 MOORING ................................................................................................................................................ 1
3 REGULATORY FRAME WORK .................................................................................................................. 2
3.1 CLASSIFICATION SOCIETY ......................................................................................................................... 2
3.2 LOCAL AMSA SURVEY ............................................................................................................................. 2
3.3 FOREIGN FLAGGED VESSEL ...................................................................................................................... 2
4 BARGE ......................................................................................................................................................... 3
5 MANNING .................................................................................................................................................... 3
6 MOORING .................................................................................................................................................... 3
APPENDIX A – 1E EQUIPMENT LIST ............................................................................................................... 5
APPENDIX B – PRELIMINARY MOORING ARRANGEMENT.......................................................................... 6
Project: Entertainment Barge Feasibility Report Document: 16178-901
Client: Old Salt Perth Pty Ltd Revision A
Page 1
1 INTRODUCTION
The purpose of this report is to assess the feasibility of the proposed Old Salt Perth Entertainment Barge installation and operations.
This report reviews regulatory requirements and assesses the mooring loads and mooring options available. This report does not assess the requirements of any support vessel/s. This report is confined to the marine aspects of the barge only and does not comment on the business or catering side of the operation.
This report assumes that the barge will be built overseas to classification society rules and will be delivered in survey.
2 SUMMARY
2.1 Survey
Three possible survey methods have been considered; classification society survey, local AMSA survey and foreign flag survey. Given that it is likely that the barge will be built and delivered in classification society survey, it is recommended that the vessel remain in survey with class as an Australian DCV. The advantages are that the vessel will not be limited in length and it is likely that it will be easier to extend the dry docking to every 5 years.
2.2 Barge
Reference B1 illustrates a suitable hull for the vessel Entertainment Barge. A more detailed vessel arrangement will need to be produced when the project progresses to the detailed design phase.
2.3 Manning
Preliminary discussions with the local survey authority indicate the minimum manning requirement is one MED2. It is recommended that the manning of the barge be revisited based on consideration of the vessel’s Safety Management System (SMS) and in consultation with DOTWA and AMSA.
2.4 Mooring
Several mooring methods have been considered for the Entertainment Barge. The most efficient and low impact mooring arrangement appears to be a four point mooring utilising SHHP anchors. Appendix B illustrates an example of preliminary design that would suit the Entertainment Barge.
Project: Entertainment Barge Feasibility Report Document: 16178-901
Client: Old Salt Perth Pty Ltd Revision A
Page 2
3 REGULATORY FRAME WORK
At the time of writing this report, the author understands that the intention is for the vessel to be built and delivered in ABS classification society survey.
Under the National Law, even though the barge will be permanently moored, it is defined as a vessel and is, therefore, subject to survey requirements. Three possible paths to survey have been identified to date;
1. Classification society: Keep the barge in ABS/class survey and register it as a DCV,
2. Local AMSA survey: Transfer the vessel from class survey to local AMSA DCV survey governed by the NSAMS,
3. Foreign flagged vessel: Transfer the registration to a flag state, i.e. Cook Islands, comply with their survey requirements and operate under the Navigation Act as a foreign vessel.
3.1 Classification society
There are some advantages with keeping the vessel in class. AMSA will accept any vessel as a registered DCV if it is in class with a recognised organisation, i.e. a classification society. As such, the vessel could be taken out of classification society survey at any point and it would be accepted by AMSA as a DCV.
The NSCV states “Vessels of 35 m or more in measured length shall be classed, i.e. designed, constructed and maintained in accordance with the rules of a recognised organisation.” Keeping the vessel in class would allow some flexibility in the vessel length. If the vessel were to be over 35 metres in length, it would need to remain in class survey.
It should be noted that whilst a vessel may be in survey with a classification society, for a vessel to operate as a DCV, the equipment, manning, lifesaving, fire safety and accommodation sections of the NSCV must be adhered to.
A classification society will allow underwater surveys in lieu of docking (UWILD) providing certain conditions are met. This would effectively mean that the vessel’s hull survey could be carried out in situ with the use of divers instead of having to dry dock the vessel. There are a number of conditions that must be met, but they are not expected to be too onerous on a vessel of this type.
3.2 Local AMSA survey
As the vessel will be in class survey when it arrives, it will be accepted into local AMSA survey as a DCV as a matter of course. However, the vessel would be limited to 35 meters. If the vessel were to be less than 35 metres, the applicable rule set would be the NSCV. It should be noted that the NSCV invokes class rules for construction at any rate.
If the vessel were to be taken out of class survey and put into local AMSA survey under NSAMS, there could potentially be some survey cost saving, however, preliminary investigations seem to indicate that this saving would not be that great.
A survey schedule under NSAMS would require the vessel to be dry docked at the third and fifth years of the five year cycle. It is likely that AMSA would grant an exemption for the year 3 dry docking if equivalence with the class requirements for UWILD could be demonstrated. However, it is likely it would be simpler to keep it in class.
3.3 Foreign flagged vessel
It is the author’s opinion, because the vessel will be permanently operating in Australian waters, path no. 3, foreign flagged vessel, is not a viable option as it is intended for vessels engaged in international voyages.
Project: Entertainment Barge Feasibility Report Document: 16178-901
Client: Old Salt Perth Pty Ltd Revision A
Page 3
4 BARGE
Reference B1 has been put forward as a typical example of a standard barge commonly manufactured in Asia. This barge is adequate in size, subject to the above survey requirements, for the intended layout shown in reference B2 and C1. As the vessel is intended to be permanently moored, the hull shape is fit for purpose.
Whilst there needs to be some more work done on the arrangement to properly deal with machinery, deck fittings and fire and safety equipment, it is the author’s opinion that there is sufficient deck area and compartment space to comply with all expected regulatory and functional requirements.
A generic equipment list for a class 1E vessel (i.e. passenger vessel, smooth waters) is attached at Appendix A. Whilst this gives a good indication of the equipment likely to be required, a more specific equipment list would need to be agreed with the local authorities due to the vessel’s unique set of operation circumstances.
It is intended at this stage that the sewage treatment plant be installed below deck, see reference C2. To properly maintain this system, we would recommend that sufficient access be built in to the vessel for this purpose. That is, the bolted flush man holes typically provided with these barges would not be practical in this instance. A hinged watertight door with regulation coaming and a step type ladder would be ideal in this situation. However, a hinged hatch with coaming and a vertical ladder would suffice.
Our understanding is that any on board generator sets would be in a purpose built, appropriately fire protected space above deck for ease of maintenance.
The accommodation layout of the vessel is intended to meet NSCV Part C Section 1. This includes compliance with Chapter 4, 4.11.4 Access for persons with disabilities.
It is intended that the support vessel and the barge will be designed/ballasted to ensure that the loading and off-loading decks on both vessels are level with each other to ensure safe transfer of passengers and personnel via a suitable short gangway.
5 MANNING
The vessel meets the requirements of Reference D8 and as such is subject to the survey requirements that applied to the vessel on 30 June 2013. This essentially means that the minimum manning requirement can be determined by the DOTWA.
Preliminary discussions with DOTWA indicate that the minimum manning for this vessel would likely be one MED2, however, this would depend on the size and complexity of machinery and would need to be confirmed as more details come to hand. DOTWA also indicated that the permanently moored barge could essentially share a master with the continuously operating support vessel on the condition that there was a continuous method of communication between the two vessels and line of sight was established at all times. Again this would need to be confirmed when more details come to hand.
Note that the above is the “minimum” manning requirement and the vessel’s Safety Management System (SMS) would indicate a more appropriate level of manning.
6 MOORING
A number of mooring methods were considered for this vessel. Required mooring characteristics are as follows:
• Directional stability, i.e. not allow the vessel to rotate
• Be capable of holding the barge in all weather conditions, i.e. permanently moored
• Low environmental impact
The original preference was to use spuds to hold the vessel in place. Unfortunately, due to the vessel’s requirement to be permanently moored, it was deemed the mooring needed to be able to withstand winds in excess of 60 knots. Due to the large sail area of the vessel, the loads are quite large. The holding power of a spud in mud/silt is difficult to determine and not as effective as an anchor. It was felt that the spuds presented too great a risk of dragging. They also require machinery to lift and lower presenting other unwanted risks.
Permanently fixed piles are very effective with regard to directional stability and holding capacity, however, they are very difficult to remove. It was felt that they presented too much of an environmental impact.
Project: Entertainment Barge Feasibility Report Document: 16178-901
Client: Old Salt Perth Pty Ltd Revision A
Page 4
It was decided that a four point mooring utilising super high holding power (SHHP) anchors presented the best option. Appendix B shows a preliminary mooring design suitable for the vessel and its intended location. This mooring design is based on a 1/50 year storm. The high holding power of some anchors allows a relatively small footprint on the river bed compared to the use of clump weights. Relatively short lengths of chain are then attached to each corner of the vessel to prevent it from rotating. The chain catenary helps hold the vessel in situ which also prevents the chain from sweeping across the river bed as single point moorings can. The four point mooring is relatively easily installed and can be easily removed at a later date with little impact.
Project: Entertainment Barge Feasibility Report Document: 16178-901
Client: Old Salt Perth Pty Ltd Revision A
Page 5
Appendix A – 1E Equipment List
This page is intentionally left blank
Australian Maritime Safety Authority, Canberra ACT Australia – July 2013 AMSA 695 (07/13) Page 1 of 5
This Guidance Notice provides details of the Class 1E vessel equipment list required under the National Standard for Commercial Vessels (NSCV).
Glossary and Key: to terms and phrases used in the vessel equipment list
/ or
< less than
> greater than
≤ equal to or less than
≥ equal to or greater than
xxm measured length in metres
nm nautical miles
100% for total complement of vessel (maximum number of passengers and crew permitted)
AIS Automatic Identification System
All refers to vessels of any length in that class
ECS Electronic Chart System
ECDIS Electronic Chart and Display Information System
GNSS Global Navigation Satellite System
GT Gross Tonnage
LCS Limited Coast Station
MO Marine Order
PA System Public Address System
This list is accurate as at 11 July 2013. Please check the current version of the NSCV and maritime legislation, or contact the National Regulator, to confirm current requirements.
VESSEL EQUIPMENT LIST – CLASS 1E
GUIDANCE NOTICE
Guidance Notice – vessel equipment list Class 1E
Australian Maritime Safety Authority, Canberra ACT Australia – July 2013 AMSA 695 (07/13) Page 2 of 5
Items required Vessels affected
Buoyant appliances (lifebuoy to support 2 persons) Vessels operating in areas with a monthly mean water temperature of 15° C or less, see NSCV Part C, Section 7A Table 2.
Dinghy / buoyant appliances / lifebuoys 40%* All (except below)
Buoyant appliances for 100%* Vessels with a passenger limit between 13 and 36 day passengers
Suitable equipment to sustain and recover persons overboard, e.g. heaving line with rescue quoit, ladder, rescue sling, scramble net
<25m
Lifebuoys (light and smoke signals to be self-activating, lifebuoy to support 2 persons)
6 minimum: 1 with light and 1 with buoyant line ≥60m, additional to buoyancy requirements
4 minimum: 1 with light and 1 with buoyant lines ≥45m <60m, additional to buoyancy requirements
2 minimum: 1 with light and 1 with buoyant line ≥10m <45m, additional to buoyancy requirements
1 minimum with light <10m, additional to buoyancy requirements
Lifejackets
Coastal lifejacket with whistle 100% All
Distress signals
EPIRB 406MHz (registered) Vessels operating >2nm from coast
2 Red hand-held flares All
1 Hand-held orange smoke signal All
* Open reversible liferafts of equivalent aggregate capacity to replace buoyant appliances on vessels continuously engaged on voyages in operational areas with a monthly mean water temperature of 15°C or less.
Guidance Notice – vessel equipment list Class 1E
Australian Maritime Safety Authority, Canberra ACT Australia – July 2013 AMSA 695 (07/13) Page 3 of 5
Items required Vessels affected
Onboard communications and alarm systems
General emergency alarm system ≥25m
PA system if no direct communications to passengers in emergencies
All
Emergency electrical installation and equipment
Battery-operated torch for 100% crew All
Navigation equipment Vessels 35m or more in length shall comply with MO 21.
Clock <35m
Pair of binoculars fitted with neck strap and carrying case
<35m
Echo sounder <35m
Signalling light All
Nautical publications <35m
ECDIS / ECS / Paper charts and backup <35m ≥12m
GNSS <35m where plotting equipment (ECDIS, ECS, etc.) is fitted
Radar <35m ≥12m
Radar reflector <12m
Speed and distance indicator <35m
Compass (card 75mm minimum diameter) <10m
Compass (card 100mm minimum diameter) ≥10m <20m
Compass (card 125mm minimum diameter) <35m ≥20m
Communication system to emergency steering <35m
Guidance Notice – vessel equipment list Class 1E
Australian Maritime Safety Authority, Canberra ACT Australia – July 2013 AMSA 695 (07/13) Page 4 of 5
Items required Vessels affected
Miscellaneous equipment
Windlass, anchors and cables (See NSCV Part C Section 7D for anchoring requirements)
All
Hawsers and warps All
Medical stores as per NSCV Part C Section 7A Annex H lists, Scale F
Vessels carrying berthed passengers
Medical stores as per NSCV Part C Section 7A Annex H lists, Scale G
Vessels carrying unberthed passengers
Logbook (See NSCV Part E) All
VHF Radio/VHF Radio with DSC All
Current edition of the “Marine VHF Radio Operators Handbook”
≥7.5m with radio
Navigation lights, day shapes, and flags as per the International Regulations for Preventing Collisions at Sea (MO 30)
All
Whistle ≥12m
Sound signal <12m
Bell (300mm minimum diameter) ≥20m
Gong ≥100m
Propeller and rudder indicator ≥15m
Bilge pumps (see Table 1) ≥5m
Bucket for bailing vessel (see Table 1) <5m
Collar repair kit and air pump All Inflatables/RIBs
Pilot ladder and boarding arrangements Where pilots are likely to be employed and the distance from the lightest seagoing waterline to the place of access to the ship is 1.5m or more
Gangway or approved safe means of access All
Boat hook <10m
Note: For Fire Fighting Equipment complying with the NSCV, please refer to the NSCV Part C Section 4.
07/13 – This Guidance Notice is provided for information only. No responsibility will be accepted from the use of the information contained in this fact sheet.
Further InformationFor a copy of the National Standard for Commercial Vessels, please visit www.nationalsystem.amsa.gov.au
Alternatively, contact AMSA, by phone: 1300 517 246 or email: [email protected]
Guidance Notice – vessel equipment list Class 1E
Australian Maritime Safety Authority, Canberra ACT Australia – July 2013 AMSA 695 (07/13) Page 5 of 5
Table 1: Bilge Pumps
Manual pumps with discharge capacity
Power pumps with discharge capacity
Measured length of vessel
NumberCapacity in kilolitre/hour
NumberCapacity in kilolitre/hour
< 5m Bailing bucket acceptable for open boats provided the bilge is readily accessible
≥ 5m < 7.5m 1 4.0
≥ 7.5m < 10m 2 4.0
≥ 10m <12.5m 1 5.5 1 5.5
≥ 12.5m < 17.5m 1 5.5 1 11.0
≥ 17.5m < 20m 1 8.0 1 11.0
≥ 20m < 25m - - 2 11.0
≥ 25m < 35m - - 2 15.0
Note: On vessels 15m and greater in length, the bilge system must be capable of pumping and draining from every space in the vessel while any one watertight compartment (apart from the machinery space) is flooded.
Project: Entertainment Barge Feasibility Report Document: 16178-901
Client: Old Salt Perth Pty Ltd Revision A
Page 6
Appendix B – Preliminary Mooring Arrangement
This page is intentionally left blank