OmniTRADEeLow Voltage, Heavy Duty Trade BinliftElectric

Om

niT

RA

DE

eThe OmniTRADE is a low voltage, electric trade binlift with proven heritage eoffering robust build, safe operation & minimal maintenance. OmniTRADEe shares mechanical design components and an array of features with the standard OmniTRADE but requires only 24v chassis electrical power for operation;

Environmentally friendly performance as standard Compatible with future developments in electric & hybrid RCV technologies,

the OmniTRADE is equally compatible with diesel powered RCV’s but e because it relies on electrical power alone offers significant savings in fuel consumption and CO emissions.2

Practically silent operation The OmniTRADE is extremely quiet, producing less than 57 dB(A) of noise e

in operation and can operate without the engine running.

Minimal chassis and body preparation The OmniTRADE negates the need for a second pump on vehicle chassis’ & e

requires no hydraulic preparation, offering a straightforward ‘bolt on, plug in & play on’ system to significantly reduce fitting times & body preparation costs.

Choice of interface The OmniTRADE is available as a one-piece lift with its own integral e

mounting frame, or as a two-part lift suitable for mounting onto a body builder prepared frame. Two width variants are available; 2.2m or 2.5m wide.

Low weight The OmniTRADE bin lift weighs as little as 710kg with the integral e

mounting frame (subject to specification).

Unique OmniBALANCE hydraulics The OmniTRADE unique and patented hydraulic system ensures that the e

lifting cycle is smooth, safe and controlled at all times.

Reduced overhang and Centre of Gravity projection The combination of low weight, a reduced overhang and a CoG projection of

only 100mm, help OmniTRADE minimise rear axle overloading.e

Smart design reduces downtime The OmniTRADE reduces downtime during unlikely repair work by e

employing maintenance free ultrasonic sensors for SMT and four wheeled recognition, low maintenance bearings and stainless steel axles representing a reliable, low maintenance solution with reduced whole life costs.

’First movement’ button station For ease of use the OmniTRADE is fitted with a ‘first movement’ button e

station on the lifting frame. Once a container is ‘engaged’, control is passed over to the main control panel mounted outside of the restricted lifting zone.

Single Man Trade (SMT) option To aid one man operation the OmniTRADE is supplied with SMT, a feature e

that enables containers to be automatically ‘engaged’ before control is passed to the manual button station.

Easy hand loading The OmniTRADE profiled, full width hopper plate lowers with minimal e

effort to cover the OmniTRADE ’s heavy duty bin lift comb/chair and eprovides genuine ‘open back’ hand loading.

Two stage soft lift for ease of operation The OmniTRADE is designed with a progressive soft lift action to enable e

easy handling and container location.

Safety Terberg’s unique geometry ensures that containers are not kicked back towards

operators during lifting. Folding safety arms conform to EN1501.1 and provide guarding against entry into the functional working space during operation.

Designed with dynamic weighing and RFID in mind The OmniTRADE is designed to integrate easily with weighing & e

identification systems, has a smooth operation to minimise ‘bin bounce’ and a vertical initial lift providing a ‘window’ for ease of data recording.

bin

lift

s | s

idel

oader

s |

wei

ghin

g &

ID

| d

ata

solu

tions

Om

niD

EL

e -

Rev

. 2 E

N U

K -

April 2011

The electrical specifications listed aboverepresent the most common configurations, however, certain chassis/body combinations

may require these to be modified.Terberg engineering should always be

consulted prior to commencing anypreparation work.

-standard -not available

Heavy duty bar comb chair

SBC10

500kgs (5000N)

710kgs (with mounting frame)

electric

16-pin / 24v

Requires 20A spare capacity. Minimum 75A, 100A recommended

Proximity switches/sensors to IP68

<57db (A)

Chair configuration >

Control system >

Single Man Trade (SMT) >

4-wheel container recognition >

‘First movement’ button station >

Terberg Weighing & RFID preparation >

EN840.1 containers (80-390 ltr:) >

EN840.2 containers (500-1200 ltr:) >

EN840.3 containers (770-1300 ltr.) >

Lifting capacity >

Weight >

Power source >

Electrical connection to body >

Chassis alternator requirement >

Waterproof ratings >

Cycle time >

Noise level: >

Safety >

-option

Manual > 4-wheel containers 12.0 secs / 2-wheel container 10.0 secs

Paladin containers with conversion bars >

Om

niT

RAD

E

e -

Rev

. 1 E

N IN

TL -

Augu

st 2

012

technical specifications

Terberg Machines B.V, Postbus 127,3400 AC IJsselstein (U), Holland.Tel > (31) 30 2100 600Fax > (31) 30 2100 610E-mail: info@terbergmachines.nl

Chassis battery requirement > 175 Ah minimum, ideal 245Ah (for hybrid chassis please consult Terberg)

CE machinery directive certification andEuropean Norms EN1501.1 & EN1501.5

OmniTRADEe

ww

w.t

erber

gmate

c.co

m

43046

0

Terberg Machines B.V. reserve the right to change the specification or design of our equipment at any time without prior notification