ONLINE AUCTION

Perfection Industrial Salesph +1-847-545-6374 • fax +1-847-427-8884www.perfectionindustrial.com

Online Bidding at www.perfectionindustrial.com

Sale is Being Held in Conjunction With:

Ph +1-847-673-0570www.allinindustrial.com

Sale Closing From: Wednesday, November 6 at 11:00 AM ETInspection: Tuesday, November 5 from 8:00 AM–4:00 PM ET or By AppointmentSale Locations: 6098 Alden Nash Ave. SE, Alto, Michigan 49302

LARGE CAPACITYCNC MACHINE SHOP – FULL FACILITY CLOSUREFEATURING: Large Capacity CNC Bridge Mill, CNC Vertical Machining Centers, Try-Out Press, Tool Room, Free Standing Crane Systems, Facility Support, Forklifts, Vehicles & More

METHODS/FEELER SDM-47266 CNC BRIDGE MILL

HURCO VMX64 VERTICAL MACHINING CENTER CLEARING F-4500-148 STRAIGHT SIDE 4-POINT PRESS

500-TON2005

2012

CNC BRIDGE MILL, VERTICAL MACHINING CENTERS

HURCO BMC4020 VERTICAL MACHINING CENTER ASSORTED TOOLING AND TOOL CARTS

Sale Closing From: Wednesday, November 6 at 11:00 AM ETInspection: Tuesday, November 5 from 8:00 AM–4:00 PM ET or By AppointmentSale Locations: 6098 Alden Nash Ave. SE, Alto, Michigan 49302

View our current auction schedule at www.perfectionindustrial.com

HURCO VMX50S VERTICAL MACHINING CENTER

CNC BRIDGE MILL2012 METHODS/FEELER SDM-47266 CNC BRIDGE MILL, s/n 45823, w/Fanuc 32i-B CNC Control, 165"-X, 160"-Y, 39"-Z, 87" x 158" T-Slot Table, 103" Between Columns, 48" Under Rail, 50 Taper Spindle, 6,000 RPM, 40-ATC, High Pressure Coolant Through Spindle, Chip Conveyor w/Dual Chip Augers, Jet Air Filtration System

VERTICAL MACHINING CENTERS2005 HURCO VMX64 VERTICAL MACHINING CENTER, s/n M644-06003045FFA, w/Ultramax 4 CNC Control, 64"-X, 34"-Y, 30"-Z, 40-Position ATC, 40 Taper Spindle, 10,000 RPM, 35" x 66" T-Slot Table, Chip Conveyor, 3-D Package, Rigid Tapping, Conversational M+G Code Programming2002 HURCO VMX50S VERTICAL MACHINING CENTER, s/n Q55026, w/Ultramax 4 CNC Control, 50"-X , 26"-Y, 24"-Z, 24-Position ATC, 40 Taper Spindle, 10,000 RPM, 26" x 58" T-Slot Table, Chip Conveyor, 3-D Package, Rigid Tapping, Conversational M+G Code ProgrammingHURCO BMC4020 VERTICAL MACHINING CENTER, s/n 8425910121800, w/Ultramax 4 CNC Control, 40"-X, 20"-Y, 24"-Z, 24-Position ATC, 40 Taper Spindle, 24" x 48" T-Slot Table, 8000 RPM, 3-D Package, Rigid Tapping, Conversational M+G Code ProgrammingALSO AVAILABLE: RISER PLATES, 50 AND 40 TAPER TOOL HOLDERS W/TOOLING, TOOLING CARTS, TOOLING COLLETS

2002

HURCO VMX64 VERTICAL MACHINING CENTER

2005METHODS/FEELER SDM-47266 CNC BRIDGE MILL

2012

STRAIGHT SIDE PRESSES & PRESS FEED EQUIP., CONVENTIONAL MACHINE TOOLS

HARIG MD618 6" X 18" HYDRAULIC SURFACE GRINDER, s/n J8056, 6" x 18" Walker Permanent Magnetic ChuckCINCINNATI MILACRON 315-16 VERTICAL MILL, s/n 31043U77-0001, 16" x 72" T-Slot Table, Dial Speed Select, Power Draw BarCINCINNATI #2 VERTICAL MILL, s/n 4A2V5E-7, 12" x 60" T-Slot TableACRA MILL VERTICAL MILL, s/n 504333, 9" x 42" T-Slot Table, Double Table Locks, HI/LO RangeBRIDGEPORT VERTICAL MILL, s/n 72498, 9" x 42" T-Slot Table, X-Axis Feed, 1 HPALSO AVAILABLE: BAND SAWS, DRILL PRESSES, BELT SANDERS, PEDESTAL GRINDERS

LODGE & SHIPLEY POWER TURN 20" X 60" ENGINE LATHE

KENT KG941DAHD 16" X 40" AUTOMATIC SURFACE GRINDER

WYSONG 52" X 10GA MECHANICAL SHEAR

CARLTON RADIAL ARM DRILLCINCINNATI MILACRON 315-16 VERTICAL MILL BRIDGEPORT VERTICAL MILL

BLISS S2-250-84-48 SSDC PRESS

DALLAS 4F-5 PNEUMATIC FEEDER/STRAIGHTENER

STRAIGHT SIDE PRESSES & PRESS FEED EQUIPMENT500-TON CLEARING F-4500-148 STRAIGHT SIDE 4-POINT PRESS, s/n 47-14115-P, 24" Stroke, 45-5/8" Max. Shut Height, 20" Ram Adjustment, 8 SPM, 96" x 144" Power Roll Out Bolster, 63" Window, Hydraulic Nuts on Tie Rods, Cisco Tonnage Monitor250-TON BLISS S2-250-84-48SSDC STRAIGHT SIDE DOUBLE CRANK PRESS, 12" Stroke, 25" Shut Height, 84" L-R x 48" F-B Bed, 25 SPM, 10" Ram Adjustment, 24" WindowsASSORTED DALLAS FEEDER/STRAIGHTENERS, AMERICAN COIL REEL

CONVENTIONAL MACHINE TOOLSLODGE & SHIPLEY POWER TURN 20" X 60" ENGINE LATHE, s/n 45823, 12" 3-Jaw Chuck, 2-1/8" Hole Through Spindle, Quick Change Tool Parts, Tailstock, Taper Attachment w/4-Jaw Chuck, Face Plate, Miscellaneous ToolingCARLTON RADIAL ARM DRILL, 60" Arm, 17" Column, (2) 9" x 14" High Riser, T-Slot BaseMORRIS MOR-SPEED RADIAL ARM DRILL, 48" Arm, 10" Column, 18" x 24" T-Slot Box Table, T-Slot BaseWYSONG 52" X 10GA MECHANICAL SHEAR, Back Gauge, Foot ControlKENT KG941DAHD 16" X 40" AUTOMATIC SURFACE GRINDER, s/n 820422, 16" x 40" Electromagnetic Chuck, DRO, Incremental Down Feed w/Counter, Spark OutGALLMEYER LIVINGSTON GRAND RAPIDS 676 16" X 48" HYDRAULIC SURFACE GRINDER, s/n 676135, 16" x 48" Electromagnetic Chuck, 1-1/2" x 20" Wheel

To discuss your requirements for an auction, please call Perfection

Industrial +1-847-427-3333

250-TON

CLEARING F-4500-148 STRAIGHT SIDE 4-POINT PRESS

500-TON

VEHICLES, PLANT SUPPORT & MOREVEHICLES10,000 LB HYSTER S100E LP FORKLIFT, s/n C004DD5004H, 60" Forks, 2-Stage Mast, Hard Tires, Monocontrol, 2,375 Hours6,000 LB HYSTER LP FORKLIFT, 42" Forks, 2-Stage Mast, HI/LO Range, Hard Tires, 3,559 Hours2,000 LB CROWN ELECTRIC WALK BEHIND FORKLIFT, S/N A86556, 42" Forks, 72" Max. Fork Height2005 GMC 2500 HD SIERRA CREW CAB PICKUP TRUCK, VIN 1CTHK23005F846205, 4WD, Automatic Transmission, Vortec V-8 Engine, Stereo, Spray-in Bed Liners, Spare Tire, Reese Hitch, Garmin, 358,638 Miles2004 GMC C6500 DIESEL FLAT BED TRUCK, VIN 1GDT3C1C54F513563, Caterpillar Engine, Spicer 7-Speed Manual Transmission, 12' Bed w/Side Racks, Dual Rear Wheels, Side Saddle Fuel Tank, Stereo, 126,652 Miles

PLANT SUPPORTATLAS-COPCO GA15FF ROTARY SCREW AIR COMPRESSOR, s/n HOP900234, w/Manual, FiltersATLAS-COPCO GA-18 ROTARY SCREW AIR COMPRESSOR, s/n AII216333, 49,054 HoursMACAIR HX125A-1 AIR DRYER, s/n 09-11-107645

ECSA 10-TON BRIDGE CRANE W/KONE FEM IΑ HOIST

ATLAS-COPCO GA15FF ROTARY SCREW AIR COMPRESSOR KURT VISES

10-TON FREE STANDING CRANE SYSTEM, Approx. 36' Span x 160' Long, w/(1) Shaw-Box 10-Ton HoistECSA 10-TON BRIDGE CRANE, W/KONE FEM IΑ 10-TON HOIST, s/n LLC-12, 36' Single Grider Bridge, Pendant Control (No Runway Included)ALSO AVAILABLE: WELDERS, WELDING SUPPLIES, POWER AND HAND TOOLS, PERISHABLE TOOLING, MILLS, DRILLS, TAPS, REAMERS, JACOBS CHUCKS, PALLET RACKING, OFFICE FURNITURE, SHOP FURNITURE, CLAMPING, WORK HOLDING FIXTURES, MAGNETS, SINE PLATES, RAW MATERIALS, INSPECTION EQUIPMENT, STEEL HORSES, BOLSTER PLATES, SHOP SUPPLIES, SPARE PARTS, SCRAP STEEL

To discuss your requirements for an auction, please call Perfection Industrial +1-847-427-3333

View our current auction schedule at www.perfectionindustrial.com

TERMS OF SALEAn 18% buyer’s premium will be charged on all assets. The buyer’s premium will be reduced to 16% for payments made by means of cashier’s check or wire transfer within 48 hours of sale close. If paying by company check, a paid in full invoice will be issued upon the check clearing. Credit card payments are limited to a maximum of $2,000. All items are sold “As is, Where is” without any warranty, express or implied.

Perfection Industrial Salesph +1-847-545-6374 • fax +1-847-427-8884www.perfectionindustrial.com

Online Bidding at www.perfectionindustrial.com

Sale is Being Held in Conjunction With:

Ph +1-847-673-0570www.allinindustrial.com

Sale Closing From: Wednesday, November 6 at 11:00 AM ETInspection: Tuesday, November 5 from 8:00 AM–4:00 PM ET or By AppointmentSale Locations: 6098 Alden Nash Ave. SE, Alto, Michigan 49302

QS-0022070

REMOVALAll purchased lots must be removed no later than Friday, November 22. Removal hours are Monday through Friday, from 8:00 AM to 4:00 PM ET. Extended hours or weekends may be accommodated with prior appointment. Anyone removing purchased items with a lift truck or another powered vehicle must have a certificate of insurance with a $2M General Liability policy, and that certificate must be provided to the auctioneer for review and approval prior to the auction.

FOR FURTHER INFORMATIONFor further information contact Jennifer Reiner at +1-847-545-6374 or jennifer@perfectionindustrial.com. For accounting and invoicing questions, contact Inesa Dicpetris at +1-847-427-3333 or inesa@perfectionindustrial.com.

GMC 2500 HD SIERRA CREW CAB PICKUP TRUCK

126,500 MILES 2004GMC C6500 DIESEL FLAT BED TRUCK

2005

HYSTER S100E LP FORKLIFT

10,000 LB