1
WEST CENTRAL MINNESOTA LOCATIONS (OWNER’S CONTACT INFORMATION/LOCATION ON OUR WEBSITE) TRACTORS Case 2394, 2wd, 4,721 hours, 24-speed Powershift, 14.9R46 rear duals @ 50%, 14L-16 fronts, 2 hyd, small 1000 PTO, quick tach, ground speed sensor, rock box, new batteries, recent complete service, EZ Guide 500 light bar guidance system, heat/AC in working order Case 2394, 2wd, 4,121 hours, 24-speed Powershift, 18.4R42 rear duals @ 40%, 4 hyd, small 1000 PTO, air seat, radio, heat/AC in working order 1974 Allis Chalmers 200, 18.4x38 rears (needs tires), 10-16 fronts, everything works, Industrial Freeman loader, 6,731 hours, 2 hydraulics, 540 PTO, SN: 8898 1954 Allis Chalmers WD 45, 14.9-28 rubber on rear in excellent shape, not locked up, ran when put in shed, will need tune up 1954 Allis Chalmers WD 45, 14.9-28 rubber on rear in excellent shape, not locked up, ran when put in shed, will need tune up, jumps out of 3rd gear Allis Chalm- ers C w/ 5’ Woods belly mower, all in working order COMBINES 2010 CAT 670B Combine, 1395 engine hours, 1042 sep hours, Auto Steer ready, power fold hopper extensions, 900/60R32 fronts, 620/75R26 rears, chaff spreader, SN: AGCO670B0AHC07166 2007 Massey Ferguson 9790 Fieldstar II, RWA, 1460 engine hours, 1002 sep hours, 520/85R42 duals, 480/80R26 rears, factory hopper ext, SN: 9790-H536242 International 1440 Combine, SN: 010800, 3,927 hours, radio, Hiniker grain tank extension, extra lights, air conditioning, 23.1x26 fronts, 11:00x16 rears, one owner, always shedded FARM EQUIPMENT 2013 Sunflower 4412-05 5 Shank Disk Ripper, used one season, auto reset on shanks, 12’6” cutting width, very nice shape, SN: D2400013X05 Minneapolis Moline Model D Corn Sheller, good shape, runs good, 540 PTO, SN: 38400258 John Deere #44 2 Bottom Pull Type Plow, (2) 16” International Field Cultivator w/ fold up wings, 18’ AUGERS/GRAIN EQUIPMENT New 2013 Brandt 8”x62’ Super Charged Auger, 540 PTO, direct drive New 2009 Brandt 10”x35’ Supercharged Auger, 540 PTO, direct drive Northland 500 bu Batch Dryer, PTO drive, ran good in 2015, belt drive on bottom (no gearbox) LIVESTOCK EQUIPMENT Vermeer 605 Super M Cornstalk Special, net and twine wrap, 21.5L- 16.1 tires, scale, chain oilers, moisture testing, good belts, Bale Expert monitor, approx 15,000 bales, SN: 1002037, excellent shape 2014 Massey Ferguson DM1361 Disc Mower w/ tine conditioner, 540 PTO, SN: GZAET00189, used on 50 acres, nice shape Meyers 3700 Manure Spreader, slope gate, horizontal dual beaters, HD updated gear box conversion for floor chain, newer beater fingers, poly sides, 1000 PTO, 4.25/65R22.5 rubber, poly floor 3 pt Bale Fork, 3 point or put on a loader (8) New Packages of Net Wrap, 64”x7000’ (10) Free Standing Corral Panels, 24’ long x 5’ high, 2 7/8” pipe frame, 7/8” rod cross bars, arched feet, chain and latch on ends, approx 600lb each, new (40) 20’ x 6-bar Continuous Fence Panels w/ clips and connectors, new (8) Osborn Big Wheel Fiberglass Feeders Lots of Misc Gates, (2) 6’, (3) 8’, (1) 10’, (4) 14’, (4) 16’, (2) 3-bar x 14’ and (4) 5-bar x 14’ gates Radco Cattle Head Gate Steel Round Bale Feeder (2) 10’ Poly Lined Feeders 8’ Wood Feeder w/ adjustable feed gates w/ poly floor Portable Loading Ramp Chute, no jacks, poor rubber Foremost Headgate Work Chute on wheels Smidley Steer Stuffer Self Feeder, approx 2.5 ton, 7’ long MISC. FARM EQUIPMENT Set of 32” Metal Tracks that work w/ John Deere 9500 and 9550 combines (that they know for sure, probably more), has plate, extensions, and brackets so weight is on combine frame and not the final drives, made by Crawler Rebuilders, has D-4 CAT tracks and CAT mid rollers, also comes with 18.4-26 rears to level out the ma- chine, on 8-bolt rims FMC Brake Lathe, will do drums and rotors Kubota 3 Cylinder Diesel w/ radiator, air cleaner, muffler and con- necting drive shaft, glow plugs, out of a Toro reel mower, runs good Hubs off Minneapolis Moline tractor, 2 3/4 axle hubs Hydrostat Trans Axle off of Toro reel master, 71” wide, 4 1/2 and 5-bolt patter on wheels, aux 3 stage pump on rear Murry 10hp Rider Lawn Mower w/ manual, 30” cut Falls Stainless Steel Sander for snow plow truck, Model #: 1ASD9SS, SN: 0351579 McL-1000 Hydraulic Power Pack, McLaughlin MFG Co (3) Large Pickup Loads of Mixed Wood Salt Brine Poly Tank w/ inner plumbing, approx 10’ long, made by Varitech Industries Inc, Garfield, MN, 119”x62”x62” 8’ Feterl Dual Stage Snow Blower w/ hyd spout 500 gallon Waste Oil Storage Tank w/ 3’x7’ portable transport tank on wheels with pump Candy Vending Machine, w/ $1.00 bill exchanger (2) 265 gallon Fuel Barrels Misc Shelving John Deere 158 Loader w/ quick attach standard brackets, joystick control, 78” bucket CONSTRUCTION 1996 Case 821B Payloader, 9,119 hours, ACS quick tach coupler and bucket, bucket is set-up with grapple brackets, machine has 3rd valve, Red Dot air conditioning, 4x4 is working order, 8.3 Cummins diesel, 4 speed trans, 23.5-25 Firestone rubber @ 60%, 24 to 12 volt converter in cab, set up for a Loup scale (minus the display) Clark Forklift, 16’ lift, 43” forks, Interstate battery was new in 2015, re- built pump, 5,000lb lift, works good New Tebben 3-point Forklift, 70” lift height, 46” forks, 4,000lb lift HD17000BD Heavy Duty Power Systems 7000 watt Diesel Generator, 10 horsepower Yanmar diesel engine, only 24 hours of use, electric start, 120/240 volts, 40 amps of power, on wheels, Paid $4,500 two years ago 18’ Bumper Pull Flat Bed Trailer, 2 5/16” ball, tandem axle, heavy duty, good tires and hideaway ramps SKID STEER ATTACHMENTS Hawz Attachments Heavy Duty Brush Mower, 72” wide, HD Omni gearbox, standard 15-25 GPM flow, HD push bar, HD welded bottom runners, HD stump jumper, 1/2” twin blades, attachable safety chains, comes complete w/ hoses, fittings and flat faced couplers, new Hawz Attachments Heavy Duty Skeleton Rock and Brush Grapple, 74” and 84”, 3” spacing between HD tines, hardened cutting edges, dual cylinder grapples, will open and close together, but close to different levels for uneven loads, comes complete with hoses, fittings, and flat faced couplers, new Hawz Attachments Heavy Duty Skeleton Rock Buckets, 68” and 78”, 3” spacing be- tween HD tines, hardened cutting edge, new Hawz Attachments Elite Industrial Tree and Fence Puller w/ push bar, rated for up to 8” trees, HD 2500 PSI cylinder, hardened teeth for longevity, weld on push bar option, 3”x3” tubing frame, new Tree/Post Puller, universal quick attach plate, powder coated finish, 2” hydraulic cylinder w/ 3,000lbs of clamping force, hoses and flat face couplers, teeth are 1” thick, new 2” Stout Material/Brush Bucket, universal quick attach plate, high strength steel, 3/8” sides, 1/4” bucket, 3045 PSI lines with 1/2” cap, grapple opening 32”, grapple width 18”, includes flat face couplers, new Bale Spear, universal quick attach plate, 3000lb capacity, 43” main spear, (2) 17” stabilizer spears, new Skid Steer Backhoe, 6’ digging depth, greaseable pins and bushings, 8” bucket, includes hoses and flat face couplers Mount Plate Attachment w/ receiver, 3,000lb rating, safety chain holes, gusseted for extra strength, grade 50 steel Pallet Fork/ Bale Spear/Receiver Hitch Combination, universal quick attach, 42” pallet forks (4,000lb), 49” bale spear (3,000lb) w/ (2) 17” stabilizer spears, receiver hitch VEHICLES/TRAILERS/EQUIP. 2005 Dodge BraunAbility Conversion Van, 51,000 miles 2004 Road Boss Gooseneck Flatbed Trailer, (2) 7,000lb axles, dovetail and fold up ramps ’00 Ford F-250 XLT Super Duty, V-10, 4x4, PS, PW, PL, PM, radio/cassette, 167,732 miles, club cab, 4-door, very minimal rust, floor boards, bed rails 1995 Ford F-350 XL Service Truck, 4-door, 280 gal fuel tank w/ baffle, newer front rubber, rear duals, side compartments, 2wd, auto trans, 460 V-8 engine, brake controller, 12 volt pump, VIN: 58260 Flo Brand Versa Tility Pro Aluminum Trailer, 9’x5’8” with ramp, 5.30x12 tires, tilting bed (4) GMC Tires on rims, fit 2002 to 2007 GMC or Chevrolet 2500 and 3500 8-bolt, 6.5” bolt pattern, comes with hub caps and lug nuts (4) BF Goodrich 275/80R24.5 Radials, approx 20-30% (4) 205/75R14 Radial Tires, new (4) Rims for 205-14 tires, 5-bolt, new GMC Rront Bumper, will fit 2002-2007 GMC 3/4 ton, chrome, no dents or dings Unicover Pickup Topper off older Ford pickup with 8’ box RECREATIONAL EQUIPMENT 1983 Alumacraft 16’ Lunker 16SS, 40 hp Evinrude engine, livewell, auto start, pedestal seats, 7-person capacity, bulge pump, depth finder, livewell pump, tarp, sitting on a Spartan trailer with rollers 26” Schwinn Bicycle Murray 22”Walk Behind Snow Blower, 5 hp Techumseh engine, electric start, self propelled ITEMS LOCATED IN MONTEVIDEO, MN OPEN HOUSE THURSDAY, OCTOBER 12, 2017 2:00-4:00 P.M. Located on 7, across the road from Walmart, next to American Surplus TRUCKS 2007 Freightliner Day Cab Semi, pre-emission, no def, 631,000 actual miles, 10-speed transmission, 450 hp, air slide 5th wheel, no rust, frame has been sand blasted and painted, good rubber, runs and drives great 2005 Mack Vision Day Cab Semi Tractor, VIN: 1M1AE06YN021805, single line wet kit, 427hp, 10-speed, 50% rubber, shows 588,603 miles, nice truck 2005 Mack Vision Day Cab Semi Tractor, VIN: 1M1AE06YN45N021804, single line wet kit, 427hp, 10-speed, 50% rubber, shows 746,698 miles, nice truck CONSTRUCTION 1995 Caterpillar D4-H LGP Dozer, 95% UC, cab, heat, recent engine and transmission overhaul, 6-way blade, 3 shank ripper, more than $31,000 spent in repairs in last 800 hours, work ready, clean 1987 Komatsu PC200LC-3, heavy duty manual thumb, 60% UC, aux hydraulics, 11,000 hours, 40” tooth bucket, runs and operates as it should Hough 90 Payloader, 4-4-1/2 yard machine, 3-speed power shift, IHC engine, good rubber, clean good running and op- erating machine Sellic SD60 Forklift, 6,000lb lift, SN: 3098707632, 16’9” max fork height, up/down, tilt, and side to side, 7,579 hours, 16.9x24 fronts, 14x7.5 rears, 6’ spread on forks Case/Drott 35 Excavator, good under carriage, Detroit engine, new seals in boom cylinder, runs and operates well 1998 Readi Haul, pintle hitch, (2) 9,000lb axles, tandem axle dually, new hardwood bed, new brakes, 22’ bed w/ 5’ beaver tail and fold down ramps, good rubber, single jack 1985 Pierce Fire Truck, pumper, 1,200 gallon, Detroit Diesel, 24,150 miles, 11R20 tires in good shape, clean truck, everything worked when taken out of service MISCELLANEOUS 70’ Semi Truck Scale, came out of Cargill elevator, working when taken out, all parts are believed to be there, but buying as is, buyer is responsible to check over, loading assistance will be provided FUEL TANKS All have hole cut in from cleaning out. When sold, they will have a plate welded in by a certified welder and guaranteed not to leak 20,000 gallon Fuel Barrel 12,000 gallon Fuel Barrel (4) 10,000 gallon Fuel Barrel 2,000 gallon Fuel Barrel 1,000 gallon Fuel Barrel RECREATION 2016 Ice Castle 6.5’x10’ Toy Hauler, new, 4 hole, furnace, manual crank, (2) 30lb LP tanks, double bunk, four rattle reels, CD/USB/ Aux radio with four speakers, CO alarm, roof top antenna, extra power cord 2016 Ice Castle 6.5’x8’ Grandpas Hideout, 4 hole, crank down, furnace w/ (2) 30lb tanks, DualMirror Bluetooth DVD/Aux player w/ speakers and antenna hookups, hole lights, one bunk and one fold out couch, new ONLINE ONLY AUCTION All bidding takes place on www.fragodtauctions.com Bidding ends MONDAY, OCT. 16 2017 6:00 P.M. EQUIPMENT CONSIGNMENT AUCTION First Lot Closes Monday, October 16 — 6:00 p.m. For more information, please email [email protected] or call 320.734.4408. Auctioneers: Randy — 320.808.8731 Nathan — 320.297.0578 Jacob — 320.760.3652 Jami — 320.424.0557 & REAL ESTATE MN 76-12 SD 17048

ONLINE ONLY - Global Auction Guide · Loading Ramp Chute, no jacks, poor rubber – Foremost Headgate Work Chute on wheels – Smidley Steer Stuffer Self Feeder, approx 2.5 ton, 7’

  • Upload
    lethu

  • View
    212

  • Download
    0

Embed Size (px)

Citation preview

Page 1: ONLINE ONLY - Global Auction Guide · Loading Ramp Chute, no jacks, poor rubber – Foremost Headgate Work Chute on wheels – Smidley Steer Stuffer Self Feeder, approx 2.5 ton, 7’

W E S T C E N T R A L M I N N E S O T A L O C A T I O N S(OWNER’S CONTACT INFORMATION/LOCATION ON OUR WEBSITE)

TRACTORSCase 2394, 2wd, 4,721 hours, 24-speed Powershift, 14.9R46 rear duals @ 50%, 14L-16 fronts, 2 hyd, small 1000 PTO, quick tach, ground speed sensor, rock box, new batteries, recent complete service, EZ Guide 500 light bar guidance system, heat/AC in working order – Case 2394, 2wd, 4,121 hours, 24-speed Powershift, 18.4R42 rear duals @ 40%, 4 hyd, small 1000 PTO, air seat, radio, heat/AC in working order – 1974 Allis Chalmers 200, 18.4x38 rears (needs tires), 10-16 fronts, everything works, Industrial Freeman loader, 6,731 hours, 2 hydraulics, 540 PTO, SN: 8898 – 1954 Allis Chalmers WD 45, 14.9-28 rubber on rear in excellent shape, not locked up, ran when put in shed, will need tune up – 1954 Allis Chalmers WD 45, 14.9-28 rubber on rear in excellent shape, not locked up, ran when put in shed, will need tune up, jumps out of 3rd gear – Allis Chalm-ers C w/ 5’ Woods belly mower, all in working order

COMBINES2010 CAT 670B Combine, 1395 engine hours, 1042 sep hours, Auto Steer ready, power fold hopper extensions, 900/60R32 fronts, 620/75R26 rears, chaff spreader, SN: AGCO670B0AHC07166 – 2007 Massey Ferguson 9790 Fieldstar II, RWA, 1460 engine hours, 1002 sep hours, 520/85R42 duals, 480/80R26 rears, factory hopper ext, SN: 9790-H536242 – International 1440 Combine, SN: 010800, 3,927 hours, radio, Hiniker grain tank extension, extra lights, air conditioning, 23.1x26 fronts, 11:00x16 rears, one owner, always shedded

FARM EQUIPMENT2013 Sunflower 4412-05 5 Shank Disk Ripper, used one season, auto reset on shanks, 12’6” cutting width, very nice shape, SN:

D2400013X05 – Minneapolis Moline Model D Corn Sheller, good shape, runs good, 540 PTO, SN: 38400258 – John Deere #44 2 Bottom Pull Type Plow, (2) 16” – International Field Cultivator w/fold up wings, 18’

AUGERS/GRAIN EQUIPMENTNew 2013 Brandt 8”x62’ Super Charged Auger, 540 PTO, direct drive – New 2009 Brandt 10”x35’ Supercharged Auger, 540 PTO, direct drive – Northland 500 bu Batch Dryer, PTO drive, ran good in 2015, belt drive on bottom (no gearbox)

LIVESTOCK EQUIPMENTVermeer 605 Super M Cornstalk Special, net and twine wrap, 21.5L-16.1 tires, scale, chain oilers, moisture testing, good belts, Bale Expert monitor, approx 15,000 bales, SN: 1002037, excellent shape – 2014 Massey Ferguson DM1361 Disc Mower w/ tine conditioner, 540 PTO, SN: GZAET00189, used on 50 acres, nice shape – Meyers 3700 Manure Spreader, slope gate, horizontal dual beaters, HD updated gear box conversion for floor chain, newer beater fingers, poly sides, 1000 PTO, 4.25/65R22.5 rubber, poly floor – 3 pt Bale Fork, 3 point or put on a loader – (8) New Packages of Net Wrap, 64”x7000’ – (10) Free Standing Corral Panels, 24’ long x 5’ high, 2 7/8” pipe frame, 7/8” rod cross bars, arched feet, chain and latch on ends, approx 600lb each, new – (40) 20’ x 6-bar Continuous Fence Panels w/ clips and connectors, new – (8) Osborn Big Wheel Fiberglass Feeders – Lots of Misc Gates, (2) 6’, (3) 8’, (1) 10’, (4) 14’, (4) 16’, (2) 3-bar x 14’ and (4) 5-bar x 14’ gates – Radco Cattle Head Gate – Steel Round Bale Feeder – (2) 10’ Poly Lined Feeders – 8’ Wood Feeder w/ adjustable feed gates w/ poly floor – Portable Loading Ramp Chute, no jacks, poor rubber – Foremost Headgate Work Chute on wheels – Smidley Steer Stuffer Self Feeder, approx 2.5 ton, 7’ long

MISC. FARM EQUIPMENTSet of 32” Metal Tracks that work w/ John Deere 9500 and 9550 combines (that they know for sure, probably more), has plate, extensions, and brackets so weight is on combine frame and not the final drives, made by Crawler Rebuilders, has D-4 CAT tracks and

CAT mid rollers, also comes with 18.4-26 rears to level out the ma-chine, on 8-bolt rims – FMC Brake Lathe, will do drums and rotors – Kubota 3 Cylinder Diesel w/ radiator, air cleaner, muffler and con-necting drive shaft, glow plugs, out of a Toro reel mower, runs good – Hubs off Minneapolis Moline tractor, 2 3/4 axle hubs – Hydrostat Trans Axle off of Toro reel master, 71” wide, 4 1/2 and 5-bolt patter on wheels, aux 3 stage pump on rear – Murry 10hp Rider Lawn Mower w/ manual, 30” cut – Falls Stainless Steel Sander for snow plow truck, Model #: 1ASD9SS, SN: 0351579 – McL-1000 Hydraulic Power Pack, McLaughlin MFG Co – (3) Large Pickup Loads of Mixed Wood – Salt Brine Poly Tank w/ inner plumbing, approx 10’ long, made by Varitech Industries Inc, Garfield, MN, 119”x62”x62” – 8’ Feterl Dual Stage Snow Blower w/ hyd spout – 500 gallon Waste Oil Storage Tank w/ 3’x7’ portable transport tank on wheels with pump – Candy Vending Machine, w/ $1.00 bill exchanger – (2) 265 gallon Fuel Barrels – Misc Shelving – John Deere 158 Loader w/ quick attach standard brackets, joystick control, 78” bucket

CONSTRUCTION1996 Case 821B Payloader, 9,119 hours, ACS quick tach coupler and bucket, bucket is set-up with grapple brackets, machine has 3rd valve, Red Dot air conditioning, 4x4 is working order, 8.3 Cummins diesel, 4 speed trans, 23.5-25 Firestone rubber @ 60%, 24 to 12 volt converter in cab, set up for a Loup scale (minus the display) – Clark Forklift, 16’ lift, 43” forks, Interstate battery was new in 2015, re-built pump, 5,000lb lift, works good – New Tebben 3-point Forklift, 70” lift height, 46” forks, 4,000lb lift – HD17000BD Heavy Duty Power Systems 7000 watt Diesel Generator, 10 horsepower Yanmar diesel engine, only 24 hours of use, electric start, 120/240 volts, 40 amps of power, on wheels, Paid $4,500 two years ago – 18’ Bumper Pull Flat Bed Trailer, 2 5/16” ball, tandem axle, heavy duty, good tires and hideaway ramps

SKID STEER ATTACHMENTSHawz Attachments Heavy Duty Brush Mower, 72” wide, HD Omni gearbox, standard 15-25 GPM flow, HD push bar, HD welded bottom runners, HD stump jumper, 1/2” twin blades, attachable safety chains, comes complete w/ hoses, fittings and flat faced couplers, new – Hawz Attachments Heavy Duty Skeleton Rock and Brush Grapple, 74” and 84”, 3” spacing between HD tines, hardened cutting edges, dual cylinder grapples, will open and close together, but close to different levels for uneven loads, comes complete with hoses, fittings, and flat faced couplers, new – Hawz Attachments Heavy Duty Skeleton Rock Buckets, 68” and 78”, 3” spacing be-tween HD tines, hardened cutting edge, new – Hawz Attachments Elite Industrial Tree and Fence Puller w/ push bar, rated for up to 8” trees, HD 2500 PSI cylinder, hardened teeth for longevity, weld on push bar option, 3”x3” tubing frame, new – Tree/Post Puller,

universal quick attach plate, powder coated finish, 2” hydraulic cylinder w/ 3,000lbs of clamping force, hoses and flat face couplers, teeth are 1” thick, new – 2” Stout Material/Brush Bucket, universal quick attach plate, high strength steel, 3/8” sides, 1/4” bucket, 3045 PSI lines with 1/2” cap, grapple opening 32”, grapple width 18”, includes flat face couplers, new – Bale Spear, universal quick attach plate, 3000lb capacity, 43” main spear, (2) 17” stabilizer spears, new – Skid Steer Backhoe, 6’ digging depth, greaseable pins and bushings, 8” bucket, includes hoses and flat face couplers – Mount Plate Attachment w/ receiver, 3,000lb rating, safety chain holes, gusseted for extra strength, grade 50 steel – Pallet Fork/Bale Spear/Receiver Hitch Combination, universal quick attach, 42” pallet forks (4,000lb), 49” bale spear (3,000lb) w/ (2) 17” stabilizer spears, receiver hitch

VEHICLES/TRAILERS/EQUIP.2005 Dodge BraunAbility Conversion Van, 51,000 miles – 2004 Road Boss Gooseneck Flatbed Trailer, (2) 7,000lb axles, dovetail and fold up ramps – ’00 Ford F-250 XLT Super Duty, V-10, 4x4, PS, PW, PL, PM, radio/cassette, 167,732 miles, club cab, 4-door, very minimal rust, floor boards, bed rails – 1995 Ford F-350 XL Service Truck, 4-door, 280 gal fuel tank w/ baffle, newer front rubber, rear duals, side compartments, 2wd, auto trans, 460 V-8 engine, brake controller, 12 volt pump, VIN: 58260 – Flo Brand Versa Tility Pro Aluminum Trailer, 9’x5’8” with ramp, 5.30x12 tires, tilting bed – (4) GMC Tires on rims, fit 2002 to 2007 GMC or Chevrolet 2500 and 3500 8-bolt, 6.5” bolt pattern, comes with hub caps and lug nuts – (4) BF Goodrich 275/80R24.5 Radials, approx 20-30% – (4) 205/75R14 Radial Tires, new – (4) Rims for 205-14 tires, 5-bolt, new – GMC Rront Bumper, will fit 2002-2007 GMC 3/4 ton, chrome, no dents or dings – Unicover Pickup Topper off older Ford pickup with 8’ box

RECREATIONAL EQUIPMENT1983 Alumacraft 16’ Lunker 16SS, 40 hp Evinrude engine, livewell, auto start, pedestal seats, 7-person capacity, bulge pump, depth finder, livewell pump, tarp, sitting on a Spartan trailer with rollers – 26” Schwinn Bicycle – Murray 22”Walk Behind Snow Blower, 5 hp Techumseh engine, electric start, self propelled

ITEMS LOCATED IN MONTEVIDEO, MNOPEN HOUSE — THURSDAY, OCTOBER 12 , 2017 — 2:00- 4:00 P.M.

Located on 7, across the road from Walmart, next to American Surplus

TRUCKS2007 Freightliner Day Cab Semi, pre-emission, no def, 631,000 actual miles, 10-speed transmission, 450 hp, air slide 5th wheel, no rust, frame has been sand blasted and painted, good rubber, runs and drives great – 2005 Mack Vision Day Cab Semi Tractor, VIN: 1M1AE06YN021805, single line wet kit, 427hp, 10-speed, 50% rubber, shows 588,603 miles, nice truck – 2005 Mack Vision

Day Cab Semi Tractor, VIN: 1M1AE06YN45N021804, single line wet kit, 427hp, 10-speed, 50% rubber, shows 746,698 miles, nice truck

CONSTRUCTION1995 Caterpillar D4-H LGP Dozer, 95% UC, cab, heat, recent engine and transmission overhaul, 6-way blade, 3 shank ripper, more than $31,000 spent in repairs in last 800 hours, work ready, clean – 1987 Komatsu PC200LC-3, heavy duty manual thumb, 60% UC, aux hydraulics, 11,000 hours, 40” tooth bucket, runs and operates as it should – Hough 90 Payloader, 4-4-1/2 yard machine, 3-speed power shift, IHC engine, good rubber, clean good running and op-erating machine – Sellic SD60 Forklift, 6,000lb lift, SN: 3098707632, 16’9” max fork height, up/down, tilt, and side to side, 7,579 hours, 16.9x24 fronts, 14x7.5 rears, 6’ spread on forks – Case/Drott 35 Excavator, good under carriage, Detroit engine, new seals in boom cylinder, runs and operates well – 1998 Readi Haul, pintle hitch, (2) 9,000lb axles, tandem axle dually, new hardwood bed,new brakes, 22’ bed w/ 5’ beaver tail and fold downramps, good rubber, single jack – 1985 Pierce Fire

Truck, pumper, 1,200 gallon, Detroit Diesel, 24,150 miles, 11R20 tires in good shape, clean truck, everything worked when taken out of service

MISCELLANEOUS70’ Semi Truck Scale, came out of Cargill elevator, working when taken out, all parts are believed to be there, but buying as is, buyer is responsible to check over, loading assistance will be provided

FUEL TANKSAll have hole cut in from cleaning out. When sold, they willhave a plate welded in by a certified welder and guaranteednot to leak20,000 gallonFuel Barrel –

12,000 gallon Fuel Barrel – (4) 10,000 gallon Fuel Barrel – 2,000 gallon Fuel Barrel – 1,000 gallon Fuel Barrel

RECREATION2016 Ice Castle 6.5’x10’ Toy Hauler, new, 4 hole, furnace, manual crank, (2) 30lb LP tanks, double bunk, four rattle reels, CD/USB/Aux radio with four speakers, CO alarm, roof top antenna, extra power cord – 2016 Ice Castle 6.5’x8’ Grandpas Hideout, 4 hole, crank down, furnace w/ (2) 30lb tanks, DualMirror Bluetooth DVD/Aux player w/ speakers and antenna hookups, hole lights, one bunk and one fold out couch, new

ONLINE ONLYAUCTION

All bidding takes place onwww.fragodtauctions.com

Bidding ends

MONDAY, OCT. 16

20176:00 P.M.

EQUIPMENT CONSIGNMENT AUCTIONFirst Lot Closes Monday, October 16 — 6:00 p.m.

For more information, please email [email protected] or call 320.734.4408.Auctioneers: Randy — 320.808.8731 Nathan — 320.297.0578 Jacob — 320.760.3652 Jami — 320.424.0557& R E A L E S T A T EMN 76-12 SD 17048