Upload
truongthuy
View
234
Download
2
Embed Size (px)
Citation preview
© Electrical Safety Authority 2011 E-Tech marketing Forum
Ontario Electrical Safety Code 25th Edition/ 2012
Ted Olechna
Director, Codes and Standard
Chief Engineer
1
© Electrical Safety Authority 2011 E-Tech marketing Forum
What I Will Cover
• ESA’s role is as the regulator
• Highlight of 2012 Code changes
• The Code and new Green technology
• Ontario differences
2
© Electrical Safety Authority 2011 E-Tech marketing Forum
For Your Safety
Electrical Safety Authority Bill 35, the Electricity Act, 1998
Section 113 (1) The Electrical Safety Authority, subject to the approval of the Lieutenant Governor in Council, may make regulations,
- prescribing the design, construction, installation, protection, use, maintenance, repair, extension, alteration, connection and disconnection of all works and matters used or to be used in the generation, transmission, distribution, retail or use of Electricity in Ontario;
© Electrical Safety Authority 2011 E-Tech marketing Forum
For Your Safety
Electrical Safety Authority
Mission and Vision
• Our Mission: To Improve electrical safety for the well
being of the people of Ontario.
• Long Term Vision: An Ontario free of electrical fatalities and
serious injury, damage or loss.
© Electrical Safety Authority 2011 E-Tech marketing Forum
For Your Safety
Regulations
• OESC is mandatory • The OESC is passed into law by
the Provincial Government
• Utility Regulations 2004
• Contractor Licensing 2005
• Product Safety 2007
© Electrical Safety Authority 2011 E-Tech marketing Forum
© Electrical Safety Authority 2011 E-Tech marketing Forum
OESC 2012 Major changes
7
CEC CODE changes
273 proposals were submitted to the CSA
• 175 proposals
• 10 new interpretations
are approved and in the new edition
Ontario amendments
• 11* Ontario amendments are changed; plus
• Rule 2-005, An application for inspection not required is amended (to be finalized in Fall 2011)
© Electrical Safety Authority 2011 E-Tech marketing Forum
Basic Exemption - proposed
The following are the changes under consideration:
• Modify the existing Rule to include owner occupied dwelling unit when the work is performed by a licensed electrical contractor;
• New amendment to allow unit owners to replace certain light fixtures & switches within an Owner-Occupied Single Dwelling;
• New amendment to permit wiring from approved class 2 extra low voltage power supply within an Owner-Occupied Dwelling Unit;
• New amendment to allow the replacement or connection of specific listed appliances by specific trades, in accordance to their designation, within an owner-occupied dwelling; and
• New amendment to allow the repair of utilization equipment by specific trades, in accordance to their designation, within an owner-occupied dwelling.
8
© Electrical Safety Authority 2011 E-Tech marketing Forum
OESC 2012 Major changes
9
General
• Cable Ampacity – Tables 1 to 4
• Temperature Limitations
• Overcurrent protection for No. 14, 12 and 10AWG conductors
• Grounding conductor size for AC systems
• Cablebus installation
• Tamper resistant receptacles
• Receptacle(s) on a roof top for equipment maintenance
• Receptacles exposed to the weather
© Electrical Safety Authority 2011 E-Tech marketing Forum
OESC 2012 Major changes
10
Green Energy Installations
• Renewable energy systems – New Section 64
• Solar photovoltaic systems – Section 50 changes
• Electric vehicle charging infrastructure
© Electrical Safety Authority 2011 E-Tech marketing Forum
Electric Vehicle Charging
Systems Code Sections 2,8,26 and 86
11
© Electrical Safety Authority 2011 E-Tech marketing Forum
Ontario Amendment Appendix B note to Rule 2-000(h)
• New Appendix B note to Rule 2-000(h)
For electrical vehicles;
This Code applies to electrical vehicle supply equipment and requires it to be approved and installed in accordance with applicable Code requirements.
This Code does not apply to the inlet or on-board charging equipment as defined by Rule 86-100 that does not provide bi-directional power feed, as specified by Rule 86-308.
12
© Electrical Safety Authority 2011 E-Tech marketing Forum
Demand factors for EV equipment Rule 8-200(1)(a) and (3)
When determining the minimum ampacity of service or feeders conductors supplying:
• a single dwelling, any electric vehicle charging equipment loads shall be considered with a demand factor of 100%. – New Rule 8-200(1)(a)(vi)
• in apartment and similar building shall be added with a demand factor of 100% – New Rule 8-202(3)(d)
• As required by the Building Code
• The electric vehicle charging equipment loads shall not exceed 80% of the rating of the overcurrent device, Rule 8-104(5).
13
© Electrical Safety Authority 2011 E-Tech marketing Forum
A typical single family dwelling with 2000 ft² (186 m²) of living area:
14
Demand factors for EV equipment Rule 8-200(1)(a) and (3) Demand factors in a single dwelling
© Electrical Safety Authority 2011 E-Tech marketing Forum
Electric vehicle systems Rule 86-306 Receptacles for charging equipment
• Amended Rule 86-306(1)(a)
(1) Each receptacle for the purpose of electric vehicle charging shall be labeled in a conspicuous, legible, and permanent manner identifying it as an electric vehicle charging receptacle and shall be
(a) a single receptacle of CSA configuration 5-20R supplied from a 125 V branch circuit rated not less than 20 A; or
(b) of the appropriate CSA configuration in accordance with Diagram 1 or 2 when supplied from a branch circuit rated at more than 125V or more than 20 A.
15
© Electrical Safety Authority 2011 E-Tech marketing Forum
Electric vehicle systems Rule 86-400(3) EV charging sites in commercial garages
• New Rule 86-400(3) (similar to new Rule 86-308(4))
Charging equipment installed in commercial garages or on premises of flammable liquid and gas dispensing and service facilities described in Section 20 shall comply with Rule 20-114 and shall not be located in the hazardous area as described in Rule 20-102.
16
© Electrical Safety Authority 2011 E-Tech marketing Forum
Electric vehicle systems Rule 86-404 Height of vehicle charging equipment
• New Rule 86-404
The height of the electric vehicle charging equipment shall be located at a height of not less than 450mm and not more than 1.2m above the floor level.
17
© Electrical Safety Authority 2011 E-Tech marketing Forum
Solar Photovoltaic installations Section 50
18
© Electrical Safety Authority 2011 E-Tech marketing Forum
Agenda
• Changes/additions to existing Rules
– Marking
– PV source and output circuit voltage
– PV circuit current rating
– Overcurrent protection
– Wiring methods
– Attachment plug
19
© Electrical Safety Authority 2011 E-Tech marketing Forum
Agenda
• New Rules and requirements:
– Voltage drop
– AFCI protection for DC circuits
– Grounding
– Inverter
20
© Electrical Safety Authority 2011 E-Tech marketing Forum
Rule 50-014
Photovoltaic dc arc-fault circuit protection
It is the direction in Ontario that DC AFCI will not be required until May 1st, 2013
21
© Electrical Safety Authority 2011 E-Tech marketing Forum
Rule 50-018 – Wiring methods (Amended)
Newly developed Solar cables type RPV & RPVU – in Part II Standard
A new standard CSA C22.2 No. 271 (published May 2011), Photovoltaic Cables specifies the requirements for photovoltaic single-conductor and multi-conductor thermoset-insulated wires and cables rated 600 V, 1000 V and 2000 V.
The standard applies to conductors installed between
22
solar panels and from solar panels to the inverter or combiner box or from combiner box to inverter.
© Electrical Safety Authority 2011 E-Tech marketing Forum
New cables type RPV and RPVU are also recognized in Tables 6, 10B and 19
23
Rule 50-018 – Wiring methods (Amended)
Newly developed Solar cables type RPV & RPVU – Part I Standard tables
© Electrical Safety Authority 2011 E-Tech marketing Forum
Rule 50-020 – Attachment Plugs (Amended)
• Used to be 50-016, renumbered to fit.
• New Subrule (2) added to require the attachment plugs to be of a type that requires the use of a tool to open, when:
• Readily accessible; and
• Used in circuits operating at over 30V
24
© Electrical Safety Authority 2011 E-Tech marketing Forum
Only inverters and AC modules approved and identified as interactive shall be permitted in interactive systems.
25
Rule 50-028 – Power Conditioning Unit (New rule) – Utility Interactive systems, Inverters approved for the purpose
This is existing direction in Ontario as per current Bulletin 84-1-*
64-108 Connection to other sources
© Electrical Safety Authority 2011 E-Tech marketing Forum
64-112 Unbalanced interconnection
1) Single-phase inverters and AC modules in interactive renewable energy systems shall not be connected to 3-phase systems, unless the interconnected system:
26
a) Is designed to provide balanced 3-phase output;
b) Complies with Rules 84-008 and 84-018; and
c) Complies with the supply authority requirements
Rule 50-028 – Power Conditioning Unit (New rule) – Multiple 1-phase inverters form 3-phase interactive system
This is existing direction in Ontario as per current Bulletin 84-1-*
© Electrical Safety Authority 2011 E-Tech marketing Forum
Renewable energy systems Code Sections 64
© Electrical Safety Authority 2011 E-Tech marketing Forum
Special terminology
Rule 64-002
• Renewable Energy.
• energy derived from resources that are naturally replenished, such as sunlight, wind, water, tides, and geothermal heat.
© Electrical Safety Authority 2011 E-Tech marketing Forum
Special terminology. Rule 64-002
Renewable Energy System
• a complete system enabling a renewable energy source to be connected to a utilization load.
© Electrical Safety Authority 2011 E-Tech marketing Forum
Small wind systems Rule 64-002 Special Terminology
• Small wind system. A system consisting of one or more wind turbines with a rated output up to and including 100 kW.
© Electrical Safety Authority 2011 E-Tech marketing Forum
Large wind systems Rule 64-002 Special
Terminology
• a system consisting of one or more wind turbines with rated power output exceeding 100 KW rated power output.
© Electrical Safety Authority 2011 E-Tech marketing Forum
Stationary Fuel Cell
© Electrical Safety Authority 2011 E-Tech marketing Forum
MICRO-HYDROPOWER SYSTEMS
33
© Electrical Safety Authority 2011 E-Tech marketing Forum
Hydrokinetic system • a system operating as an interconnected or stand-alone
system and consisting of one or more hydrokinetic turbines that convert the kinetic energy of flowing water into electrical energy with a rated output of up to and including100 kW.
© Electrical Safety Authority 2011 E-Tech marketing Forum
STORAGE BATTERIES RULE 64-700 – 64-714
35
© Electrical Safety Authority 2011 E-Tech marketing Forum
General
Rule 64-010 Overcurrent protection
• Where a circuit breaker is backfed (“LOAD” to “LINE” rather than “LINE” to “LOAD”) it shall be approved for the purpose.
• Circuit breakers labelled “LINE” and “LOAD” are not approved to be backfed.
© Electrical Safety Authority 2011 E-Tech marketing Forum
General
© Electrical Safety Authority 2011 E-Tech marketing Forum
General Rule 64-028 Interconnections to other circuits Where the renewable energy system is not intended to be interconnected with the supply authority the system shall be designed so that it is impossible to have both systems connected at the same time.
© Electrical Safety Authority 2011 E-Tech marketing Forum
General Rule 64-030 Interconnected system connections (1) The output from a utility-interactive inverter or power
conditioner shall be connected to the line side of the service disconnecting means in accordance with Section 84, except as permitted in Subrule (3).
© Electrical Safety Authority 2011 E-Tech marketing Forum
General Rule 64-030 Interconnected system
connections Cont’d
© Electrical Safety Authority 2011 E-Tech marketing Forum
General
Rule 64-034 Systems in access of 750 V dc Where the maximum system voltage of a renewable energy source exceeds 750 V dc it shall comply with the requirements of Section 36 and any other requirements applicable to these installations.
© Electrical Safety Authority 2011 E-Tech marketing Forum
Other Code changes
42
© Electrical Safety Authority 2011 E-Tech marketing Forum
Receptacles “General”
26-700 Tamper resistant requirements
New Subrule 26-700 (12)
Tamper resistant receptacles now required in “child care facilities”
© Electrical Safety Authority 2011 E-Tech marketing Forum
Rule 26-702 is amended to require 15A and 20A (125V and 240V) receptacles exposed to weather to be provided with cover plates suitable for “wet locations” that will provide shielding with and without a plug inserted into the receptacle.
Receptacles “General”
26-702 Receptacles exposed to weather
© Electrical Safety Authority 2011 E-Tech marketing Forum
Rule 26-702 (1) & (2)
Receptacles “General”
26-702 Receptacles exposed to weather
As per Rule 26-702(2) Requires to be marked “WET Locations” whether or not a plug is inserted into it.
As per Rule 26-702(1) Requires to be marked “Wet Location Only When Cover Closed”
© Electrical Safety Authority 2011 E-Tech marketing Forum
Installation of lighting equipment
30-308 Circuit connections Amended Subrule 30-308(4)
Fluorescent luminaire disconnect means.
(4) The connection of branch circuit conductors exceeding 150 volts-to-ground to the conductors of each fluorescent luminaire utilizing double-ended lamps shall be made by one of the following ways;
© Electrical Safety Authority 2011 E-Tech marketing Forum
Administrative Rule 2-022(3) Approval of LED luminaires
• New Rule 2-022(3)(c)(ii)
Luminaires with LED lamps supplied from a class 2 powers supply are required to be approved.
47
© Electrical Safety Authority 2011 E-Tech marketing Forum
Administrative Rule 2-022 Approval of LED luminaries
• New Appendix B note to Rule 2-022(3)(c)
Decorative light strings, signs or displays with LED lamps other than LED luminaries that are connected to approved class 2 power supplies are not required to be approved.
48
© Electrical Safety Authority 2011 E-Tech marketing Forum
Wiring methods Rule 32-102(1) Use of rigid non-metallic conduit in fire alarm systems
• Amended Rule 32-102(1)
Conductors of a fire alarm systems are now permitted to be installed in rigid non-metallic conduit without being embedded in 50mm of masonry (as per current ESA Bulletin 32-3-*)
49
© Electrical Safety Authority 2011 E-Tech marketing Forum
• Amended Rule 46-108(1)
Conductors described in Rule 46-108 (Life Safety, Emergency etc.) are now permitted to be installed in rigid non-metallic conduit without being embedded in 50mm of masonry (as per current ESA Bulletin 46-4-*).
50
Wiring methods Rule 46-108(1) Use of rigid non-metallic conduit in life safety systems
© Electrical Safety Authority 2011 E-Tech marketing Forum
New Cable types in Tables 11, 12 and 19 Table 19, Armoured cable types ACG & ACGWU
• ACG90— a 14 AWG to 6 AWG multi-conductor aluminum interlocked armoured cable with aluminum bonding conductor in intimate contact with armour designed for applications permitting the use of the armour as a means of equipment bonding.
• ACGWU90 — Same construction as the ACG90 with the addition of the overall jacket.
© Electrical Safety Authority 2011 E-Tech marketing Forum
New Cable types in Tables 11, 12 and 19 Table 19, Cable Type ACG & ACGWU
The construction of ACG & ACGWU cables incorporates a full size aluminum bond conductor in direct intimate contact with the interlocked armour.