Embed Size (px)
Citation preview
Dishwasher DFI654BOPERATING INSTRUCTIONS
Contents
2Front panel3Safety instructions4Before washing for the first time5Loading the dishwasher8Using the dishwasher
12Settings14Care and cleaning
16Troubleshooting19Technical information20Installation21ASKO Service22Information for test institute23Your notes24Quick guide
Dear Customer,Thank you for choosing this quality product from ASKO.
We hope it will meet your expectations and fulfil your needs for many years to come. Scandinavian design combines cleanlines, everyday functionality and high quality. These are key characteristics of all our products and the reason they aregreatly appreciated throughout the world.
To get the most out of your new dishwasher, we recommend that you read the Operating Instructions before using the dish-washer. The last page also includes a Quick guide.
Front panel
To switch on the dishwasher, press and hold the main power switch until the display lights up.
"Welcome to your new ASKO. This is a first time set up." is shown on the display the first time the dishwasher is switched on. Itis important that you choose the right settings to ensure good dishwashing results. See page 4.
EcoSpeed mode
2:00STARTSTOP
Display Start/Stop
Program mode selector
Navigation buttons for selecting a program
Option Delayed Start
Option Extra Dry
Main power switch
2
Safety instructions
• Read the operating instructions and keepthem in a safe place!
• Number of place settings: 15• Never use the dishwasher for any purpose
other than that specified in these operatinginstructions.
• Do not load the dishwasher door or dishwash-er baskets with anything other than dishes.
• Never leave the dishwasher door open assomeone may trip on it.
• Use only dishwasher detergent!• This appliance is not intended for use by
persons (including children) with reducedphysical, sensory or mental capabilities, orlack of experience and knowledge, unlessthey have been given supervision or instruc-tion concerning use of the appliance by aperson responsible for their safety.
• If the supply cord is damaged, it must be re-placed by a special cord or assembly avail-able from the manufacturer or its serviceagent.
• Damaged mains cables must only be re-placed by a qualified electrician.
• Only use the dishwasher in domestic house-hold environments for dishwashing householddishes. All other use is prohibited.
• Never place dishes with solvent residues inthe dishwasher due to the risk of explosion.Nor may dishes that contain ash, wax or lubri-cants be washed in the dishwasher.
WARNING!
Knives and other pointed items must be placedwith the points down in the cutlery basket orhorizontally in other baskets.
InstallationSee the chapter Installation.
Child safety• Always start the dishwasher immediately after
adding detergent.• Keep children away from the dishwasher when
the door is open. Some detergent may remaininside!
• Do not allow children to use or play with thedishwasher. Be especially vigilant when thedoor is open.
WARNING!
Dishwasher detergents are strongly alkaline.They can be extremely dangerous if swallowed.Avoid contact with skin and eyes and keepchildren away from the dishwasher when thedoor is open. Seek medical attention if swal-lowed.
Check that the detergent compartment isempty after completion of the wash cycle.
Activate child lock (Kid Safe™)You can activate the child lock (button lock) to prevent children fromstarting the dishwasher. See the chapter Settings.
Winter storage/Transport• Store the dishwasher where the temperature remains above freezing.• Avoid long transport distances in very cold weather.• Transport the dishwasher upright or laying on its back.
Overflow guard functionThe overflow protection starts pumping out the machine and turns offthe water supply if the water level in the dishwasher exceeds the normallevel. If the overflow protection is triggered, turn off the water supplyand call the service department.
Packing materialThe packaging protects the product during transport. The packagingmaterial is recyclable. Separate the different packaging materials tohelp reduce raw material use and waste. Your dealer can take thepackaging for recycling or direct you to the nearest recycling centre.The packaging is comprised of:
• Corrugated cardboard made from up to 100% recycled material.• Expanded polystyrene (EPS) with no added chlorine or fluorine.• Supports made from untreated wood.• Protective plastic made from polyethylene (PE).
Disposal• When the dishwasher has reached the end of its service life and is
to be disposed of, it should immediately be made unusable. Pullout the power cable and cut it as short as possible.
• The dishwasher is manufactured and labelled for recycling.• Contact your local authority for information about where and how
your dishwasher should be correctly recycled.
3
Before washing for thefirst time
1. Checking water hardnessContact the local water utility to check the water hardness in your area.This is important with regard to how much detergent and rinse aid touse.
2. Basic settingsTo switch on the dishwasher, press and hold the main power switchuntil the display lights up.
"Welcome to your new ASKO. This is a first time set up." is shownon the display. It is important that you choose the right settings to en-sure good dishwashing results.
Confirm setting
Select setting
Main power switch
Settings
Language1
Select the language to be shown on the display.
Rinse aid 0/1/2/3/4/52
By using rinse aid you will improve your drying result. You will alsoachieve a better dishwashing result with glassware and dishes.
Select rinse aid dosage. The rinse aid dispenser can be adjustedbetween 0 (Off) and 5 (High dosage).
Pre-selected at factory: 5
To change the chosen setting, see the chapter Settings.
4
3. Top up with rinse aidBy using rinse aid you will improve your drying result. You will alsoachieve a better dishwashing result with glassware and dishes.
Press to open
1 Open the rinse aid compartment lid.
2 Carefully top up with rinse aid. Only add rinse aid to the level markedmax.
3 Wipe up any splashes of rinse aid around the compartment.
4 Close the lid firmly.
Top up rinse aidWhen the rinse aid needs topping up, the above symbol lights on thedisplay.
After topping up, it may take a while before the symbol goes out.
NOTE!Increase the rinse aid dosage:• If the dishes have water marks.Decrease the rinse aid dosage:• If the dishes have a sticky white/blue film.• If the dishes are streaked.• Build-up of foam. If you have very soft water, the rinse aid can be
diluted 50:50 with water.
NOTE!For water with a hardness greater than 10–12 °dH, you ought to userinse aid with citric acid (known as acid rinse aid).
Loading the dishwasher
Energy-efficient dishwashingRun programs only with a full loadWait to run a program until the dishwasher is full. This way you saveenergy. Use the Rinse and hold program to rinse the dishes if thereare any unpleasant odours while you wait for the dishwasher to becomefully loaded.
Run programs at a lower temperatureIf the dishes are only slightly dirty, you can select a program with a lowtemperature.
Select Green modeThe dishwasher has different program modes. To save energy andwater, use Green mode.
Better drying results are achieved if you open the door a little once theprogram has ended. (If the dishwasher is built-in, the surroundingcabinets must be resistant to any condensation from the dishwasher.)
Do not rinse under running waterSimply scrape off large food particles before loading the dishwasher.
Choose a green detergentRead the environmental declaration on the packaging!
Connect to cold waterConnect the dishwasher to the cold water supply if the building isheated using oil, electricity or gas.
Connection to hot water supplyConnect the dishwasher to the hot water supply (max. 70 °C) if thebuilding is heated using an energy-efficient means such as districtheating, solar power or geothermal power. Choosing a hot water con-nection cuts dishwashing times and reduces the dishwasher's energyconsumption.
NOTE!Do not exceed the permitted water supply temperature. Certain ma-terials used in some cookware cannot withstand high heat.
5
Fragile dishesSome cookware is not dishwasher safe. This can be for several reasons.Some materials cannot withstand strong heat, others can be damagedby dishwashing detergent.
Exercise caution with, for example, handmade items, fragile decoration,crystal/glassware, silver, copper, tin, aluminium, wood and plastic.Look for the "Dishwasher safe" marking.
Fragile decorationPorcelain with decoration on top of the glazing (the items feel rough)should not be washed in a dishwasher.
Crystal/GlassWash fragile items made of crystal/glass, such as crystal glass fromOrrefors, using the gentle dishwashing program Crystal glass. Remem-ber to use only a small amount of detergent and to place items so thatthey do not touch each other during the wash.
By using rinse aid you will improve your drying result. You will alsoachieve a better dishwashing result with glassware and dishes.
Hand-painted glassware, as well as antique and very fragile items,should not be washed in a dishwasher.
SilverSilver and stainless steel items should not come into contact, as thesilver can become discoloured.
AluminiumAluminium can lose its shine if washed in a dishwasher. However, goodquality aluminium pans can be washed in a dishwasher, even if someof the shine will be lost.
Cutlery with glued handlesSome types of glue are not dishwasher safe. In such cases, the handlesmay loosen.
Points to consider• All dirty surfaces should face inwards and downwards!• Dishes should not be placed in or on each other.• Angle dishes with hollows, such as cups, so that the rinse water
will run off. This is also important for plastic items.• Make sure small items cannot fall through the dishwasher basket;
place them in the top cutlery tray.
NOTE!Check that the spray arms can rotate freely.
The dishwasher's basketsThe dishwasher is equipped with a top cutlery tray, an upper basketand a lower basket with a cutlery basket.
The appearance of the baskets may differ depending on the dishwashersetup.
Top cutlery trayThe top cutlery tray has space for cutlery, ladles, whisks, serving cutleryand similar items.
Raising the top cutlery tray1 Pull out the top cutlery tray.
2 Pull the two locking handles on either side forward to raise the topcutlery tray.
Lowering the top cutlery tray1 Make sure the upper basket is in the lowest position.
2 Pull out the top cutlery tray.
3 Slide the two locking handles on either side downwards and back-wards to lower the top cutlery tray.
Upper basketPlace glasses, cups, bowls, side plates and saucers in the upperbasket. All dirty surfaces should face inwards and downwards! Wineglasses are placed on the wine glass shelf and knives are placed inthe knife stand on the right (if fitted).
6
Raising the upper basket1 Pull out the upper basket.
2 Grab the sides of the upper basket with both hands and lift it up.
Lowering the upper basket1 Pull out the upper basket.
2 Pull out the two locking handles on either side to lower the upperbasket.
Lower basketPlace plates, side plates, serving dishes, pots and cutlery (in the cutlerybasket) in the lower basket.
Place pots and pans in the rear right part of the lower basket to achievethe best dishwashing results from the rear of the two spray nozzles(WideSpray™), which are intended for these types of dishes.
Foldable tinesLower the foldable tines (plate supports) when washing pots and pans.Release the foldable tines by pressing the catch inwards before adjust-ing their position.
Washing large platesMove the foldable tines and their mounts to widen the distance betweenthe tine rows to adapt the lower basket to plates with a diameter greaterthan 25 cm.
Cutlery basketPlace cutlery with the handles facing down, except for knives, andspread them out as much as possible. Ensure that spoons do not stackinside each other.
The cutlery basket is best placed in the middle at the front of the lowerbasket to achieve the best dishwashing performance from the uniquespray nozzle (Power Zone Cutlery™), which is intended for the cutlerybasket.
WARNING!Knives and other pointed items must be placed with the points downin the cutlery basket or horizontally in other baskets.
Fold-down section for small itemsThe cutlery basket has a fold-down section in the middle for smallitems, or small shafts, such as electric whisk attachments.
7
Cutlery basket with lid
The cutlery basket lid can be removed and used, for example, as anextra cutlery basket in the upper basket (see below).
AccessoryBuy an extra cutlery basket. The extra cutlery basket is flexible andcan be dismantled and attached to the lower basket or the large cutlerybasket to make an extra large cutlery basket. This accessory is avail-able where you purchased your dishwasher.
2
1
Using the dishwasher
Add detergentPress to open
1 Prewash detergent compartment
2 Main wash detergent compartment
Detergent is added according to water hardness.
Follow the instructions on the detergent packaging.
Too much detergent can result in less effective dishwashing and alsoentails greater environmental impact.
The detergent compartment must be dry when adding detergent. Thereis one compartment for the prewash and one for the main wash. Ifpowder or liquid dishwasher detergent is used, add a small amountof the detergent to the prewash compartment. Contact the detergentmanufacturer if you have questions about the detergent.
NOTE!Use only dishwasher detergent! Washing up liquid must not be usedas the foam that forms prevents the dishwasher from operating effec-tively.
Dishwasher tabletsHalve the tablet if it is difficult to close the dispenser lid. There is a riskthat the detergent will not be released properly if the lid is tight andwill not open correctly.
NOTE!Dishwasher tablets are not recommended for short programs (lessthan 75 minutes). Use powder or liquid dishwasher detergent instead.
All-in-one detergentThere are many types of all-in-one detergents on the market. Read thedirections for these products carefully.
NOTE!Optimal washing and drying results are achieved by using regulardishwashing powder or liquid detergent with separately dispensedrinse aid.
8
EcoSpeed mode
2:00STARTSTOP
Select a program mode Select any options
Press and hold the main power switch until the display lights up.
Select the program
Starting the dishwasher
The main power switchPress and hold the main power switch until the display turns on. Alsocheck that the water tap is on.
Select a programTo select a program, press the Navigation button or until the desiredprogram is shown on the display.
Choose a programme to suit the type of dishes and how dirty they are.
ECO washUse when you want to save water and energy. For normally soiled load,such as plates, serving dishes, cups, glasses and so on.
Heavy washUse to wash normally soiled load, such as plates, serving dishes, cups,glasses and so on.
Auto washThe dishwasher can measure how dirty the dishes are and adjust waterconsumption and temperature accordingly. When newly installed, theprogram needs to be run five times before it is fully adapted and canprovide the best results.
Sanitation washProgram for very dirty dishes, such as pans, casserole dishes andoven dishes. If these dishes do not completely fill the dishwasher, youcan add plates and the like.
Time programThe program adapts to the specified running time or finish time. Withthis program it is important to choose a time suited to how dirty thedishes are.
Slightly dirty dishes0:15-0:45
Normally dirty dishes1:00-1:30
Very dirty dishes2:00-2:30
– To set the desired program time, press and hold the optionbutton.
Rinse and holdUsed to rinse dishes while you wait for the dishwasher to become fullyloaded.
Plastic washA program intended for washing plastic items that are dishwasher safe.This program has an extra long drying cycle. Porcelain and glassescan also be washed.
Hygiene washThis program is designed to meet strict hygiene demands.
Crystal glassA gentle dishwashing program with a low temperature for washingfragile items made of crystal/glass, such as crystal glass from Orrefors.
Remember to use only a small amount of detergent and to place itemsso that they do not touch each other during the wash. See also Fragiledishes in the chapter Loading the dishwasher. Porcelain that has justbeen used without dried-on leftovers can also be washed using thisprogram.
Quick Pro washShorten the dishwashing program by preheating the water. This pro-gram is not intended for dried-on leftovers. Remember to scrape offlarger food particles before loading the dishwasher.
1 To prepare the program, press and hold Start/Stop until the displayshows "Preheating". Close the door. Wait until the display shows"Preheating ready".
You can load the dishes while the water is being preheated.
2 To start the program, press and hold Start/Stop until the displayshows "Program started, close door". This indicates that the dish-washer is ready to start. Close the door properly, otherwise thedishwasher will not start.
Self-cleaningSelf-cleaning programme for hygienic cleaning of the dishwasher tub,spray arms and spray pipes.
This programme can be run (with no dishes in the machine) usingnormal dishwasher detergent or citric acid. Special dishwashercleaners are also available on the market. For the removal of limescaledeposits, see The dishwasher tub in the chapter Care and cleaning.
Upper half washYou can use this program if you only have cups and glasses that needwashing in the upper basket. Slightly dirty dishes can also be placedin the lower basket.
Lower half washYou can use this program when you only want to wash plates andcutlery in the lower basket. Slightly dirty dishes can also be placed inthe upper basket.
Select a program modeTo select a program mode, press the program mode selector until thedesired mode is shown on the display. The available program modesvary between programs.
For a brief description, press and hold the program mode button.
Green modeThe dishwasher uses less energy and water. The program time is ex-tended.
Speed modeThe program time is shortened, but the dishwasher uses more energyand water.
Night modeLower noise level during the dishwashing program. The program timeis extended.
9
Intensive modeImproves the dishwashing results, but the dishwasher uses more energyand water. The program time is extended.
Select an OptionTo select an option, press the option button until the desired option isshown on the display. The available options vary between programs.
Extra DryA higher temperature in the final rinse and a longer drying cycle im-prove the drying results if you activate this option. Energy consumptionis slightly increased.
For a brief description, press and hold the button for Extra Dry.
Delayed StartWhen you select Delayed Start, the dishwasher will start in 1-24 hoursafter you have pressed the button Start/Stop and closed the door.
1 Press the button once to activate Delayed Start. Press the buttonseveral times – or hold it in – to set the desired number of hours.
2 Press Start/Stop and close the door. The timer counts down andthe dishwasher starts after the selected delay.
If you want to cancel the Delayed Start option, open the door and pressand hold the main power switch until the display turns off.
TIP!Activate the setting High temperature to improve the dishwashingresults. Energy consumption is slightly increased.
STARTSTOP Starting the dishwasher
Press and hold Start/Stop until the display shows “Program started,close door”. This indicates that the dishwasher is ready to start. Closethe door properly, or the dishwasher will not start.
If the dishwasher is not started or the door is not closed within 2 minutesof the last button press, the machine switches off.
Time remainingOnce you have chosen a program, a program mode and options, thetime the program took when last used is displayed.
Stopping or changing a programIf you want to change program after starting the dishwasher, open thedoor then press and hold Start/Stop for three seconds. Add more de-tergent if the lid of the detergent dispenser has opened. Then choosea new program, press Start/Stop and close the door.
If you want to load more dishesOpen the door. The dishwasher stops automatically. Add the dishesand close the door. After a while, the dishwasher continues the pro-gram.
If the dishwasher is turned off due to apower failureIf the dishwashing program was not finished, the interrupted programcontinues when power is restored.
NOTE!During drying, the program is interrupted if the power is cut or thedoor is open for more than 2 minutes.
Once the program has finishedOnce the program has finished and the door is opened "Ready" appearson the display.
At the end of the program, you will hear a short beep. Chapter Settingsdescribes how to change this function.
The dishwasher switches off automatically after the program ends.Turn off the water tap after each use.
How to get the best drying results• Fully load the dishwasher.• Angle dishes with hollows, such as cups, so that the rinse water
will run off. This is also important for plastic items.• Top up with rinse aid or increase the rinse aid dosage level.• Activate the Extra Dry option.• Open the door a little once the program has finished.• Allow the dishes to cool before unloading the dishwasher.
Unloading the dishwasherHot porcelain is more fragile. Leave the dishes to cool in the dishwasherbefore unloading them.
Unload the lower basket first to avoid any water drops from the upperbasket falling onto the dishes in the lower basket.
10
Prog
ram
char
tC
on
sum
pti
on
valu
es1)
Fin
alri
nse
Nu
mb
ero
fri
ns-
esM
ain
was
hP
rew
ash
esD
eter
gen
t,co
m-
par
tmen
t2
(ml)
Pro
gra
m
Wat
erco
ns.
(lit
er)
Ho
tw
ater
3)C
old
wat
er2)
En
erg
y(a
pp
rox.
kWh
)D
ish
was
hin
gti
me
(ap
pro
x.h
rs:m
in)
En
erg
y(a
pp
rox.
kWh
)D
ish
was
hin
gti
me
(ap
pro
x.h
rs:m
in)
12.2
0.5
2:30
0.8
2:50
48°C
348
°C2
25EC
Ow
ash
4)
130.
62:
051.
22:
2565
°C2
60°C
225
Hea
vyw
ash
11-2
00.
5-1.
02:
20-3
:00
0.9-
1.5
2:40
-3:2
065
°C2-
350
-65
°C1-
325
Aut
ow
ash
150.
61:
351.
21:
5565
°C2
60°C
225
Sani
tatio
nw
ash
11-1
90.
4-1.
20:
15-2
:30
0.5-
1.6
0:15
-2:3
0<
65°C
2-3
<65
°C0-
225
Tim
epr
ogra
m
30.
010:
070.
010:
07--
-°C
1R
inse
and
hold
120.
62:
251.
12:
4568
°C2
50°C
125
Plas
ticw
ash
100.
91:
001.
41:
1070
°C2
70°C
25H
ygie
new
ash
90.
51:
200.
81:
4050
°C2
45°C
20C
ryst
algl
ass
100.
60:
20+
0:20
0.9
0:30
+0:
2055
°C2
60°C
20Q
uick
Pro
was
h
120.
61:
501.
02:
1060
°C2
60°C
120
Upp
erha
lfw
ash
120.
61:
501.
02:
1060
°C2
60°C
120
Low
erha
lfw
ash
1)Consumptionvalues
varyde
pend
ingon
thetempe
rature
oftheinco
mingwater,roo
mtempe
rature,loa
dsize,selec
tedad
ditiona
lfun
ctions
andmore.
2)Connectiontocoldwater,a
pprox.20
°C.
3)Connectiontohotw
ater,a
pprox.60
°C.
4)Th
een
ergy
labe
lper
form
ance
figur
esar
eba
sed
onth
ispr
ogra
mw
hich
isre
com
men
ded
forn
orm
ally
soile
dlo
ad(n
oop
tions
).
11
Settings
Open the dishwasher's Settings menuTo open the dishwasher's Settings menu, press the Navigation button or until Settings menu is shown on the display and confirm your selectionusing the mode selector .
To exit the dishwasher's Settings menu, select Exit and confirm your selection using the mode selector .
STARTSTOP1� Language English
Mode selector to confirm current setting
Settings Current setting
Navigation buttons for choosing setting
OptionsSettings
You can choose the language used for the display.English GB/English AU/English US/Svenska/Dansk/Norsk/Suomi/Deutsch/Italiano/Nederlands/Français/Español
Language1.
Programs can be shown or hidden in the menu. Choose betweenOn and Off.
Heavy wash On/OffECO wash On/OffAuto wash On/OffSanitation wash On/OffTime program On/OffRinse and hold On/OffPlastic wash On/OffHygiene wash On/OffCrystal glass On/OffQuick Pro wash On/OffSelf-cleaning On/OffLower half wash On/OffUpper half wash On/Off
Select programs2.
You can activate the child lock (button lock) to prevent childrenfrom starting the dishwasher.
On/OffChild lock3.
To temporarily deactivate or activate the child lock, press andhold the left Navigation button and the option button Delayed Startfor 3 seconds.
For adjusting the contrast of the display.Contrast top display1/2/3/4Display settings4.
Setting to hide the logo shown on the display.Logo in top display On/Off
This sound is used to confirm each button press.0/1/2/3Feedback sound5.
The buzzer indicates when a dishwashing program has ended.0/1/2/3Buzzer volume6.
Error messages are always indicated by a loud buzzer.
Setting for rinse aid dosage. The rinse aid dispenser can be adjust-ed between 0 (Off) and 5 (High dosage).
0/1/2/3/4/5Rinse aid7.
Increase the rinse aid dosage:• If the dishes have water marks.
Decrease the rinse aid dosage:• If the dishes have a sticky white/blue film.
• If the dishes are streaked.
• Build-up of foam. If you have very soft water, the rinse aid canbe diluted 50:50 with water.
12
OptionsSettings
Super rinse adds two extra rinses.On/OffSuper rinse8.
Activated in the following programs:
Heavy washECO washSanitation washPlastic washLower half washUpper half wash
Activate the setting High temperature to improve the dishwashingresults. Energy consumption is slightly increased.
On/OffHigh temperature9.
Activated in the following programs:
Heavy washECO washSanitation washPlastic washQuick Pro washLower half washUpper half wash
13
Care and cleaning
Coarse filterThe coarse filter traps larger food particles, which cannot get past thedrainage pump. Empty the coarse filter as necessary.
Coarse filter
1 Lift the coarse filter by the handle.
2 Empty the coarse filter. Remember to replace it!
Fine filterDebris that collects on the fine filter is automatically rinsed away duringeach wash. Clean the fine filter when necessary.
Fine filter
1 Turn the handle anticlockwise.
2 Lift the filter straight up using the handle. Free the coarse filter toclean the fine filter.
3 Replace in reverse order. Check that the edges seal properly whenreplacing the fine filter.
4 Lock the filter in place by turning the handle clockwise to the stopposition. The handle should point straight out from the dishwasher.
NOTE!The dishwasher must not be used without the filter in place!
Diswashing efficiency can be affected if the course filter is incorrectlyfitted. After cleaning ensure that filter handle is fully locked with thehandle pointing out of the dishwasher.
Spray armsHoles and bearings can sometimes become blocked. Remove anydebris using a pin or something similar. The spray arms also haveholes on their undersides.
To facilitate cleaning, you can remove the spray arms. Remember tofit them firmly back into place after cleaning.
Top spray arm• The upper basket must be removed before the top spray arm can
be released. Pull out the upper basket and turn the basket catchon each runner outwards (see illustration). The basket can now beremoved.
• Pull out the top cutlery tray. Press the top spray arm up and unscrewthe spray arm bearings counter-clockwise to remove the spray arm.
Upper spray arm1 Pull out the upper basket.
2 Unscrew the spray arm bearings counterclockwise to remove thespray arm from the upper basket.
Lower spray arm• Pull the lower spray arm straight up to release it.
The door and the door sealRegularly clean the sides of the door and the door seal. Use a slightlydamp cloth (with a little cleaner if necessary).
Front panelKeep the buttons clean and free from grease. Wipe them clean with adry or slightly damp cloth. Never use cleaners – they can scratch thesurface. Use the main power switch to turn off the dishwasher beforecleaning the buttons to avoid activating any buttons unintentionally.
The dishwasher tubThe dishwasher tub is made of stainless steel and is kept clean throughnormal use.
Limescale depositsIf you have hard water, limescale deposits may build up in the dish-washer. If this happens, run the Self-cleaning program with two table-spoons of citric acid in the detergent compartment (with no dishes inthe machine). Special dishwasher cleaners are also available on themarket.
14
Unblocking the drainage pumpIf the dishwasher still contains water after the programme has finished,something may be blocking the drainage pump. Such items are easilyremoved.
1 Turn off the machine using the main power switch and unplug itfrom the wall socket.
2 Remove the coarse filter and the fine filter.
3 Scoop out the water from the dishwasher tub.
4 In order to inspect the drainage pump, remove the coloured stopon the right in the bottom drain.
5 Turn the pump wheel located behind the drainage pump stop byhand. Carefully remove any items.
6 Replace the drainage pump stop along with the fine and coarsefilters.
7 Plug the machine in again.
If the dishwasher still does not start and a whirring sound is heard,the overflow protection has been activated.
• Shut off the water.• Remove the plug from the wall socket.• Call the service department.
Drainage pump stop
NOTE!Do not forget to replace the drainage pump stop.
Unblocking the inlet hose filterIf the water supply contains small particles, the outer filter on the inlethose may become blocked, which results in Water inlet fault.
1 Turn off the machine using the main power switch and unplug itfrom the wall socket.
2 Turn off the water tap.
3 Unscrew the inlet hose.
4 Carefully remove the outer filter from the inlet hose and clean it.
5 Replace the filter and check that the gasket is correctly positioned.
6 Screw the inlet hose firmly into place.
7 Plug the machine into the wall socket and turn on the water tap.Allow the pressure to settle for a while and check that the connectionis watertight.
Outer filter on inlethose
Gasket
15
Troubleshooting
ActionType of fault on the display
Clear the drainage pump. See the chapter Care and cleaning. If the problem persists, call theservice department.
Overfilling water 1F10
See “Water remains in the dishwasher” in the table “Problem” below. If the problem persists, callthe service department.
Water outlet faultF11
Check whether dishwasher inlet hose is connected to a pressure limiting valve (some pressurelimiting valves may restrict the supply of water to the dishwasher).
Water inlet faultF12
Check that the water tap is on. Check that the outer filter on the inlet hose is not blocked. SeeUnblocking the inlet hose filter in the chapter Care and cleaning. If the problem persists, call forservice.
Check that the water tap is on. If the problem persists, call the service department.
Turn off the water tap and call the service department.Inlet valve leakageF40
Call the service department.Water level faultF52
Turn off the water tap and call the service department.Overfilling water 2F54
Call the service department.Circ. pump faultF56
Press any button to clear the error message.
ActionPossible causesProblem
Wait a moment then try again.You have pressed the buttons too soon afteropening the door.
The buttons do not react when pressed.
See the chapter Settings.Child lock (button lock) activated.
Open the door. The buttons only react to usewhen the door is open.
The door is closed.
Clean with a dry or slightly damp cloth.The buttons are dirty.
Check that the baskets are correctly positionedhorizontally.
The baskets are not correctly positioned.Cannot close door.
Check that the dishes are not blocking the bas-kets from sliding properly into place.
Press and hold Start/Stop until the display shows"Program started, close door".
The Start/Stop start button has not been pressedfor long enough.
The dishwasher does not start.
Check.The door is not properly closed.
Close the door and wait. After a while, the dish-washer continues the program.
You have opened the dishwasher to add moredishes while a program is in progress.
Check.A fuse/circuit breaker has been tripped.
Check.The plug is not plugged into the wall socket.
Check.The water tap is turned off.
Check.Overflow/leaks
Turn off the water tap. Pull out the plug and callthe service department.
A whirring sound (the drainage pump) is heardfrom the dishwasher and does not stop when themain power switch is turned off.
Press and hold Start/Stop for three seconds ifyou want to cancel the Delayed Start option.
Check that the Delayed Start option has not beenselected.
16
ActionPossible causesProblem
Check that the dishes are not blocking the sprayarms.
The spray arms do not rotate.The dishes are not clean.
Clean the spray arms. See Chapter Care andcleaning.
Spray arm holes or bearings blocked.
Choose a longer programme.Unsuitable dishwashing program.
Dose according to water hardness. Far too muchor far too little detergent results in poorer dish-washing results.
Incorrect detergent dosage.
Avoid large packages.Old detergent. Detergent is a perishable product.
Do not cover porcelain with large bowls or thelike. Avoid placing very tall glasses in the cornersof the baskets.
Dishes loaded incorrectly.
Place dishes to sit steady.Glasses and cups have toppled over during theprogram.
Check that the filter handle is locked in the stopposition. The handle should point towards theback of the dishwasher.
The filters are not fitted correctly.
Rinse off these types of foodstuffs if not startingthe dishwasher immediately. Use the Rinse andhold program.
Some foodstuffs, such as mustard, mayonnaise,lemon, vinegar, salt and dressings, can markstainless steel if left for too long.
Spots on stainless steel or silver.
In order to avoid marks and tarnishing, separatedishes made from different metals, such as silver,stainless steel and aluminium.
All stainless steel can cause spots on silver ifthey come into contact during dishwashing.Aluminium can also cause spots on dishes.
See the chapter Settings.Incorrect rinse aid dosage setting.Spots or films on the dishes.
Wash crystal at a low temperature and with aconservative amount of detergent. Contact thedetergent manufacturer.
Too high temperature and/or too much detergentcan cause etching on crystal. Unfortunately, thiscannot be repaired, only prevented.
Reduce the dosage. See the chapter Settings.If you have very soft water, you may want to dilutethe rinse aid 50:50 with water.
Rinse aid dosage setting too high.The dishes have a sticky white/blue film.
Use a detergent with a bleaching agent.Lipstick and tea can be difficult to wash off.Spots left after washing.
The detergent compartment must be dry whenadding detergent.
The detergent compartment was damp whenadding detergent.
Detergent residue in the detergent compartmentafter dishwashing.
Check that the dishes are not preventing thedetergent compartment from opening.
The detergent compartment is blocked.
Check that the dishes are placed securely. Spinthe spray arms to make sure they can rotate.
The dishes are not correctly placed or the sprayarms are not rotating.
Rattling sound when dishwashing.
17
ActionPossible causesProblem
Clean the coarse and fine filters.The filters are blocked.Water remains in the dishwasher.
Check that the filter handle is locked in the stopposition. The handle should point towards theback of the dishwasher.
The filters are not fitted correctly.
Clean the drainage pump. See the chapter Careand cleaning.
Debris in the drainage pump.
Check that the hose is free from kinks and sharpbends.
Kink in drainage hose.
Disconnect the drainage hose where it connectsto the sink unit's water trap. Check that no debrishas fastened and that the connection has an in-ner diameter of at least 14 mm.
Blocked drainage hose.
Clean with washing-up brush and low foamingcleaner.
Dirt around the seals and in corners.Bad odour in dishwasher.
Run a program with a higher temperature onceor twice a month. Or run a self-cleaning program.See Self-cleaning in Chapter Using the dishwash-er.
Low temperature programs have been selectedfor a prolonged period.
Activate the Extra Dry option.Depending on the load, the programme's dryingcycle may be insufficient.
The dishes are not dry enough.
Fully load the dishwasher.The dishwasher is not fully loaded.
Top up with rinse aid or increase the rinse aiddosage level. See the chapter Settings.
Rinse aid needs topping up or dosage is set toolow.
Open the door a little once the program has fin-ished.
18
Technical information
Information on energy labellingEnergy labelling
AS/NZS 2007Australian standard:
15Number of place settings:
ECO wash 1) , no optionsDishwashing programs:
2:50 hours:minutesProgram time:
Cold water 20 °CConnection:
IEC 60704-2-3Test method for noise measurement:
1) This dishwashing program is the standard cleaning cycle used to compile the energy labelling information. It is intended for washing normallydirty dishes and is the most effective program in terms of combined energy and water consumption.
Technical data819-872 mmHeight:
596 mmWidth:
559 mmDepth:
45 kg 1)Weight:
0.03–1.0 MPaWater pressure:
See compliance plateElectrical connection:
See compliance plateRated power:
1) Weight can vary due to different specifications.
19
Installation
819*
- 872
559
680-
760*
*
5219
344
2
573596
131-
186
50 30-94
1198
700
[mm]
*Remove locking nuts for an installed height of 820-821 mm.
**Door length.
Nominal dimensions. Actual measurements may vary.
It is important that you read through and follow the instructions anddirections below. Conduct installation and connection in accordancewith the separate installation instructions.
Safety instructions• Connections to electricity, water and drainage must be performed
by a qualified professional.• Always follow applicable regulations for water, drainage and elec-
tricity.• Take care during installation! Wear protective gloves! There must
always be two people!• Before screwing the dishwasher into place, test the dishwasher by
running the Rinse and hold program. Check that the dishwasherfills with water and drains. Check also that none of the connectionsleak.
WARNING!Turn off the water supply when installing the dishwasher!
The plug must be disconnected or power to the socket turned offwhile the work is carried out!
Setup• The dimensions and connection information are included in the
separate installation instructions. Check that all dimensions andconnections are correct before commencing the installation. Notethat the height of the exterior panel can be adjusted to match otherfittings.
• Make sure the area on which the dishwasher is to be installed isfirm. Adjust the adjustable feet so that the dishwasher is level.Tighten the lock nuts.
Drainage connectionSee the separate installation instructions for necessary information.
This dishwasher is suitable for installing in a raised recess (to attainan ergonomic working height). This means that the dishwasher can beplaced so that the drainage hose runs to a lower level than the bottomof the dishwasher, such as by routing it directly to a floor drain. Thedishwasher is fitted with an integrated anti-siphon device to preventthe machine from being emptied of water during the wash cycle.
The drainage hose can also be connected to a connection nipple onthe sink unit’s water trap. The connection nipple must have an internaldiameter of at least 14 mm.
The drainage hose may be extended by a maximum of 2.5 m (the totallength of the drainage hose must not exceed 4.5 m). Any joins andconnecting pipes must have an internal diameter of at least 14 mm.However, the drainage hose should ideally be replaced with a newhose without joins.
No part of the drainage hose may be more than 950 mm above thebottom of the dishwasher.
Ensure that the drainage hose has no kinks.
Connection to water supplyUse only the inlet hose supplied with the dishwasher. Do not re-useold or other spare hoses.
The supply pipe must be fitted with a water tap (stopcock). The watertap must be easily accessible, so that the water can be shut off if thedishwasher has to be moved.
Once the installation is complete, turn on the water tap and allow thepressure to settle for a while. Check that all connections are watertight.
Connection to cold water supplyConnect the dishwasher to the cold water supply if the building isheated using oil, electricity or gas.
Connection to hot water supplyConnect the dishwasher to the hot water supply (max. 70 °C) if thebuilding is heated using an energy-efficient means such as district
20
heating, solar power or geothermal power. Choosing a hot water con-nection cuts dishwashing times and reduces the dishwasher's energyconsumption.
NOTE!Do not exceed the permitted water supply temperature. Certain ma-terials used in some cookware cannot withstand high heat. SeeFragile dishes in the chapter Loading the dishwasher.
NOTE!Connecting a dishwasher to the water supply via certain types ofpressure limiting valves may restrict the water supply!
This may cause the error message Water inlet fault to be displayed.
Electrical connectionInformation about the electrical connection can be found on the com-pliance plate. This specification must match the electricity supply.
The dishwasher must be connected to an earthed wall socket.
The electric wall socket must be placed outside of the installation areato be easily accessible after installing the dishwasher. Do not use anextension cord!
NOTE!Repairs and maintenance must be carried out by a qualified profes-sional.
ASKO Service
Information about your productThere is a QR code on the compliance plate. Scan the code to viewinformation about your product.
Contact the service departmentRead the chapter Troubleshooting before contacting the service de-partment. If you have encountered a problem that you cannot resolve,please contact your nearest dealer, see www.asko.com.
When making contact, provide the details on the serial number plate.Include the article number (1) and the serial number (2).
SERIAL NO.:ART. NO.:1
2
QR code
21
Information for testinstitute
Request test institute information via e-mail [email protected].
The request should include the details on the product’s serial numberplate. Include the article number (1) and the serial number (2).
SERIAL NO.:ART. NO.:1
2
22
Your notes
23
Quick guide
Load the baskets
1. (See page 5.)
Do not rinse dishes under running water before loading them in the dishwasher. Simply scrape offlarge food particles before loading the dishwasher.
Check that the spray arms can rotate freely
2. Check also that the water tap is on.
Don't forget! Empty the coarse filter and clean the fine filter when necessary. (See page 14.)
Add detergent
3. The detergent compartment has one smaller compartment for the prewash and one for the mainwash. (See page 8.)
Press and hold the main power switch until the displaylights up4.
Check/Add rinse aid
5. Use rinse aid to achieve good washing and drying results. (See page 4.)
Refill rinse aid indicator.
Select a program, a program mode and any options
6. (See page 9.)
Press Start/Stop, close the doorSTARTSTOP
7.
Art.
No.
:663
407.
Rev
.02.
We
rese
rve
the
right
tom
ake
chan
ges.
ASKO APPLIANCES • SOCKERBRUKSGATAN 3, SE-531 40 LIDKÖPING, SWEDEN • WWW.ASKO.COM24
en (0
9-17
)
