OPERATION MANUAL

• Power ON• Front End operation• TILT sensor• Power OFF• Remote assistance with Teamviewer

For all information please contact:pino.convertino@yahoo.it

mailto:pino.convertino@yahoo.it

POWER ON PROCEDURE

1. Plug the power cord (220V.)2. Switch ON3. Push the "POWER" button

1 2

3

Now wait until the system starts...

After about a minute the PinBall software will run

1. Select the table with the lateral switch (left / right)

2. Then push the "PLAY" button

Wait until the table is loading... if you see a black screen, don't worry, wait...

1. Now press the "COIN" button, one coin for each press2. Press "PLAY"

2

3. Press "LAUNCH" button to play the ball

To exit from the current table press "EXIT" on the rear of the cabinet

Now you go to the frontend and you can change the table (see procedure before)

1

2

3

TILT SENSOR

The TILT sensor is activated when you move the cabinet like a real one.

POWER OFF PROCEDURE

1. Just press the "POWER" button and wait until the LCD's monitor turns off2. Switch off the power button

1

REMOTE SUPPORT WITH TEAMVIEWER

1. Plug a keyboard and mouse in the USB socket on the back of cabinet (use a USB hub or wireless keyboard and mouse)

2. Press ESC key on keyboard3. select "EXIT" with the lateral switch on the cabinet4. Push "PLAY" button

2

1

Double click on "TeamViewer" icon on desktop

2

3 4

The software generates the ID and PASSWORD.