Operations & Installation Guide: ATC-AMFM2 .Crestron, the Crestron logo, Adagio, Crestron Toolbox,

  • View
    214

  • Download
    0

Embed Size (px)

Text of Operations & Installation Guide: ATC-AMFM2 .Crestron, the Crestron logo, Adagio, Crestron Toolbox,

  • Crestron ATC-AMFM2 Dual AM/FM Radio Tuner Card Operations & Installation Guide

  • This document was prepared and written by the Technical Documentation department at:

    Crestron Electronics, Inc.

    15 Volvo Drive Rockleigh, NJ 07647

    1-888-CRESTRON

    Regulatory Compliance

    Federal Communications Commission (FCC) Compliance Statement

    Operation is subject to the following two conditions:

    Industry Canada (IC) Compliance Statement

    This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:(1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

    CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment.

    NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

    1. This device may not cause interference, and2. This device must accept any interference, including interference that may cause undesired operation of the device.

    Reorient or relocate the receiving antennaIncrease the separation between the equipment and receiverConnect the equipment into an outlet on a circuit different from that to which the receiver is connectedConsult the dealer or an experienced radio/TV technician for help

    As of the date of manufacture, the ATC-AMFM2 has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling.

    Crestron, the Crestron logo, Adagio, Crestron Toolbox, and SystemBuilder are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. Windows is a trademark or registered trademark of Microsoft Corporation in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron

    disclaims any proprietary interest in the marks and names of others. Crestron disclaims any proprietary interest in the marks and names of others. 2011 Crestron Electronics, Inc.

  • Crestron ATC-AMFM2 Dual AM/FM Radio Tuner Card

    Contents

    Dual AM/FM Radio Tuner Card: ATC-AMFM2 1 Introduction ...............................................................................................................................1

    Features and Functions ................................................................................................1 Specifications ..............................................................................................................2 Physical Description....................................................................................................3

    Setup ..........................................................................................................................................5 Installation...................................................................................................................5 Regional Configuration ...............................................................................................6 Hardware Hookup .......................................................................................................6 Antenna Orientation ....................................................................................................7

    Programming Software..............................................................................................................8 Earliest Version Software Requirements for the PC ...................................................8 Programming with SystemBuilder ..............................................................................8 Programming with SIMPL Windows ..........................................................................8 Out of the Box Programming ....................................................................................10

    Uploading and Upgrading........................................................................................................11 Establishing Communication.....................................................................................11 Firmware ...................................................................................................................11

    Operation .................................................................................................................................12 Problem Solving ......................................................................................................................13

    Troubleshooting.........................................................................................................13 Reference Documents................................................................................................13 Further Inquiries ........................................................................................................13 Future Updates ..........................................................................................................14

    Appendix: RDS/RBDS Function Support ...............................................................................15 Return and Warranty Policies ..................................................................................................17

    Merchandise Returns / Repair Service ......................................................................17 CRESTRON Limited Warranty.................................................................................17

    Operations & Installation Guide DOC. 7216A Contents i

  • Crestron ATC-AMFM2 Dual AM/FM Radio Tuner Card

    Dual AM/FM Radio Tuner Card: ATC-AMFM2

    Introduction The ATC-AMFM2 tuner card is designed for use with the Crestron CEN-TRACK TunerRack Modular Multi-Tuner, and with Adagio systems that feature tuner card slots. The ATC-AMFM2 provides two fully independent AM/FM tuners on a single card.

    Features and Functions

    Two independent AM/FM radios on a single plug-in card Plug in compatibility with Crestron host systems (CEN-TRACK,

    AES, AMS and AMS-AIP, all sold separately) RDS/RBDS compatible.*

    * The Radio Data System (RDS), a European standard, and Radio Broadcast Data System (RBDS), a

    North American standard, permit broadcasters to use a sub-carrier frequency to transmit inaudible digital data along with their regular FM programming to receivers equipped to process the data. Refer to Appendix: RDS/RBDS Function Support on page 15 for more information.

    Operations & Installation Guide DOC. 7216A Dual AM/FM Radio Tuner Card: ATC-AMFM2 1

  • Dual AM/FM Radio Tuner Card Crestron ATC-AMFM2

    Specifications Specifications for the ATC-AMFM2 are listed in the following table.

    ATC-AMFM2 Specifications

    SPECIFICATION DETAILS Audio Maximum Output

    1 Vrms @ 1kHz

    FM Tuner (Typical of 2) Frequency Range Usable Sensitivity S/N Ratio IF Rejection AM Rejection Stereo Separation

    87.50 to 108 MHz (50 or 100 kHz steps) 11 dBf mono; 60 dBf stereo 64 dB @ 65 dBf mono; 56 dB @ 65 dBf stereo 100 dB 55 dB 27 dB

    AM Tuner (Typical of 2) Frequency Range Sensitivity Selectivity Alternate Channel Selectivity Image Rejection IF Rejection

    530 to 1710 kHz (9 or 10 kHz steps) 3.5 V (RF input level 10 dB S+N/N) 10 kHz 55 dB 35 dB 60 dB

    Environmental Temperature 32 to 140 F (0 to 60 C) Humidity 10% to 90% RH (non-condensing) Dimensions Height 1.38 in (35 mm) Width 4.91 in (125 mm) Depth 6.19 in (158 mm) Weight 10 oz (279 g)

    2 Dual AM/FM Radio Tuner Card: ATC-AMFM2 Operations & Installation Guide DOC. 7216A

  • Crestron ATC-AMFM2 Dual AM/FM Radio Tuner Card

    Physical Description This section provides information on the connections, controls and indicators available on the ATC-AMFM2.

    ATC-AMFM2 Physical View

    ATC-AMFM2 Overall Dimensions

    6.19 in(158 mm)

    4.91 in(125 mm)

    6.64 in(169 mm)

    1.38 in(35 mm)

    1 2 3 4

    Operations & Installation Guide DOC. 7216A Dual AM/FM Radio Tuner Card: ATC-AMFM2 3

  • Dual AM/FM Radio Tuner Card Crestron ATC-AMFM2

    Connectors, Controls & Indicators

    # CONNECTORS, CONTROLS & INDICATORS

    DESCRIPTION

    1 AM ANT

    2-pin spring-loaded terminal; AM shielded loop antenna included; Impedance: 50 Ohms

    2 FM ANT

    IEC 169-2 coaxial (IEC-to-F adapter included); FM wire antenna included; Impedance: 75 Ohms

    3 AM ANT

    2-pin spring-loaded terminal; AM shielded loop antenna included; Impedance: 50 Ohms

    4 FM ANT

    IEC 169-2 coaxial (IEC-to-F adapter included); FM wire antenna included; Impedance: 75 Ohms

    4 Dual AM/FM Radio Tuner Card: ATC-AMFM2 Operations & Installation Guide DOC. 7216A

  • Crestron ATC-AMFM