Opterna datasheets 1

Americas:(703) [email protected]

Europe:+44(0)2031 301 [email protected]

Middle East:+971 4 299 [email protected]

Asia Pacific:+91(0) 484 2104 [email protected]

OpternaROpternaR

DSAH1rev1Visit: Opterna.com

TurnOpt™ 1000 FDH

The Opterna® TurnOpt 1000 FDH is a compact Fiber Distribution Hub designed for low-density FTTx deployments. Supporting up to 72 subscribers, the TurnOpt 1000 FDH is housed in a small form-factor enclosure ideally suited for pole-mount installation, as well as wall-mount applications where space is limited. A pedestal version is also available.

Housed within the TurnOpt 1000 FDH is Opterna’s exclusive Rotating Frame Assembly, providing 180° access to subscriber ports, the splitter module compartment, splitter lead storage and cable management. A variety of high performance splitter modules are available from Opterna for use in the TurnOpt 1000 FDH.

Introduction

• Service distribution for 48 or 72 subscribers • 4 splitter module capacity• Storage for up to 32 splitter outputs • Optional MPO connectivity to Opterna FDT • Compact size: approx. 12” x 24” x 10”

• NEMA 4-rated OSP enclosure • Approx. 28 lbs. • Pedestal version available

Features Exclusive Rotating Frame Assembly

OSP Solutions

1/4





OpternaROpternaR


TurnOpt™ 1000 FDH

• Rural Service

• Small to mid-sized MDU’s

• Distributed or midspan architectures

• Fill gaps in service deployment

Applications:

FDH SpecificationsConnector Insertion Loss 0.3 dB maximumConnector Return Loss >65 dBSplitter Module Capacity 4Splitter Lead Storage Capacity 32Maximum Number of Splice Trays 4Stub Cable Indoor/Outdoor rated, G.657.A1 fiberCable entry ports 2 ports, 0.59” (15mm) max. dia.Door lock 216 style with latch and padlock holeEnclosure Color BeigeEnclosure Material AluminumWeight (stubless) 28 lbs.Enclosure Dimensions 24.5 x 12 x 10 inches

622 x 295 x 252 mm

OSP Solutions

12 or 24 feeder fiber ports are available for connection to the Splitter Module inputs, or for direct connection to individual subscribers. The FDH can be ordered with splice trays or stubs for the Feeder fiber cable.

MPO connectivity is also available on the distribution side for connection to Opterna Fiber Distribution Termi-nals. 12f ribbon stubs or splice trays are also supported; contact Opterna for details.

The TurnOpt 1000 FDH features a NEMA 4-rated metal enclosure for indoor or OSP applications, with integral wall-mount flanges. An optional pole-mount conversion kit is available.

Contact Opterna today for more information on the TurnOpt 1000 FDH and other Opterna FTTx products.

2/4





OpternaROpternaR

DSAH1rev1Visit: Opterna.comVisit: Opterna.com

• Available splitter modules include 1x32, 1x16, 1x8,

2x1x16, and 2x1x8

• Snap-in, finger release – no tools needed

• Ships with output leads loaded into storage trays

• Telcordia GR 1209 and 1221

Splitter Specifications 1x8 1x16 1x32Operating Wavelength 1260 – 1650 nmInsertion Loss, Max. 10.40 dB 13.9 dB 17.2 dBIL Uniformity, Max. 0.50 dB 1.4 dB 1.6 dBPolarization Dependent Loss, Max.

0.3 dB

Return Loss, Min. 55 dBOperating Temperature -40 to 85 C

TurnOpt™ 1000 FDH

Pedestal Dimensions:

TurnOpt Splitter Modules:

OSP Solutions

A B C D E45” 30” 35” 14.5” 11.5”

3/42/4





OpternaROpternaR


Ordering Info:

TurnOpt™ 1000 FDH

FDH Ordering Information Example: AH1W48-BTL00-SL20-SCA

Enclosure Type

Feeder Fiber Count

Feeder Fiber Connection

Feeder Fiber Stub Length

Output Fiber Connection

Distribution Fiber Stub Length

Adapter Type

AH1W48 pole/wall 48 ports

A 12f TL Splice tray with pigtails

00 splice tray MP MPO panel 00 MPO panel SCA SC/APC

AH1W72 pole/wall 72 ports

B 24f SL Stub, loose tube I/O cable

10 33 ft (10m) SL Stub, loose tube I/O

cable

10 33 ft (10m) LCA LC/APC

AH1E48 pedestal 48 ports

20 66 ft (20m) 20 66 ft (20m)

AH1E72 pedestal 72 ports

31 100 ft (31m) 31 100 ft (31m)

TurnOpt Splitter Module Ordering Information:

Splitter count Splitter type Splitter grade Termination

TSM1 Single 108 1x8 S Standard SCA SC/APC

TSM2 Dual 116 1x16 P Premium LCA LC/APC

132 1x32

Pole-mount kit: AH1W1-PMK

Notes: 1) All stubs and pigtails contain G.657.A1 bend-insensitive fiber.2) 12f Ribbon stubs available; contact Opterna for details.

Note: TSM2-132x-xxx is not a valid configuration.

Splitter grade:Premium: Telcordia certified, extended warranty, r=5mm ultra bend insensitive fiberStandard: 3-year warranty

Copyright 2014, Opterna International Corp. All rights reserved. The information contained herein is subject to change without notice. The Opterna name and logo are registered trademarks of Opterna Technology Limited.

OSP Solutions

4/4

Email: [email protected] Phone: +1 703 653 1130 Website: opterna.com Opterna R

Outdoor Demarc Unit™

Opterna’s DOpt unit is a unique outdoor enclosure that allows for the use of a variety of hardened simplex, duplex and multi-fiber connectors. DOpt can either be attached to a pole for aerial net-works or placed inside pedestals for buried networks.

Introduction

• Designed for cell tower applications • IP rated plastic enclosure • Integral tower • “Hardwire” or detachable cable entry option

Features “Outdoor Demarc Unit”

OSP Solutions


Parameter Specification

Enclosure • Dimensions: 254 High x 163 Wide x 97 Deep mm • Material: UV Resistant Polycarbonate• Color: RAL 7016 Anthracite Grey• Suitable for:-45°C to +75°C.

Input Cable • Number of fibers: 12 fiber• Input Adapter: Outdoor rated 12 fiber MTP• Input Connector: Outdoor rated 12 fiber MTP

Output Cable • Six, two fiber cable with outdoor rated LC Duplex Connector

Mounting • Stainless Steel Polemount Brackets• Built-in Wallmount feature with four mounting slots

Ingress Protecting • Per IP66

Compliance • Per GR771

Outdoor Demarc Unit™ OSP Solutions


Optical Distribution Box™

Opterna’s Optical Distribution Box (ODB) product line is a robust series of outdoor-rated enclosures designed for FTTx networks. The ODB features an internal swing-out panel design with an intergrated splice area that accommodates a PLC splitter, splicing and excess fiber storage. The swing-out panel also features a front face with a removable adapter plate holding SC duplex or LC quad adapters.*

Introduction

• Indoor and outdoor applications • IP 55 rated • Compact and light, made of UV resistant polycarbonate • Swing-out panel and removable adapter plate for easy installation and maintenance • Integrated holder for one PLC splitter • Integrated splice tray and fiber management • Distribution cables can be pre-terminated or spliced to pigtails • Lock with protective cap • Available in different sizes with up to 48 distribution ports

Features “Optical Distibution Box”

MTU, SFU Solutions


Parameter ODB 1A ODB 1B Dimensions(HxWxD) 8.9 x 6.3 x 3.2 inches 8.9 x 7.8 x 3.2 inches

Feeder cable port(s) 1 PG13.5 (5 to 9mm dia.) 2 PG16 (10 to 14mm dia.)

Distribution cable ports 8 (2 to 7mm dia.) 8 (2 to 7mm dia.)

Number of adapters 2 SC duplex or LC quad 4 SC duplex or LC quad

Splice capacity 10 12

Splitter capacity 1 2

Water and dust resistance IEC 60529 (IPX5, IP5X)

Impact resistance IEC 60529 (IK08)

Operating temperature -20 to +65°C

Enclosure material Polycarbonate

Color RAL 7016 (anthracite grey)

Dimensions 11.4”w x 11.4”h x 5.7”d

Optical Distribution Box™ MTU, SFU Solutions


MT Fanout Cable Assemblies™

The Opterna MT hydra fanout assemblies are used to connect active equipment directly to high fiber count backbone MT cables and MT cassettes in data centers and other high density environments. Manufactured in our state- of-the-art facilities, they offer rapid deployment, high density and maximum space utilization combined with significant time and cost savings. The Opterna MT fanout cable assemblies are available in a wide range of multimode and single mode fiber types and connectors. The compact micro tube cables greatly reduce the total volume of cables and help to optimize the cable management.

Introduction

• Standard 12 and 24 fiber cable and MT connectors • Available in all fiber types - SM and MM • 100 % factory terminated and tested - saves times and guarantees high performance • Standard LSZH outer sheath, PE and OFNP available on request • Standard Polarity A, all other types available on request • Optimized performance using highest quality connectivity components MTP Standard and MTP Elite connectors • 40 & 100G ready • 12 or 24 fibers in one compact MT connector • Standard 2.0mm fanout with SC and LC connectors, 0.9mm and other types of connectors available on request

Features “Data Center Connectivity MT Fanout Cables”

Central OfficeSolutions

Email: [email protected] Email: [email protected]: +1 703 653 1130 Phone: +1 703 653 1130Website: opterna.com Website: opterna.comOpterna Opterna R R

• Data center and telecommunication networks • High density connection between active equipment and distribution architectures• Gigabit Ethernet, Local Area Networks, Wide Area Networks, Storage Area Networks• Backbone links CATV and video telecommunication networks• High density FTTX applicationsv

Parameter SpecificationMT Connectors Female 12 or 24F MTP® or MTP Elite® (MPO on request)Fanout connectors SC or LC others available on requestCable type Micro fiber indoor cable with micro tubeFiber types G652D, OM3, OM4 (Others on request)Cable diameter (mm) 12F - 3.5 24F - 4.6Cable weight (kg/ km) 12.5 14.6Bending radius 20 x cable diameter (10 x cable diameter without load)Operating temperature °C 0 to +60Compliance ISO/IEC 60793, ISO/IEC 60794, IEC 60332, TIA-604-5, IEC 61754-7, IEC

61754-4, IEC 61754-20, ISO/IEC 11801, EIA/TIA-5267 &14A, RoHS


Connector type Average IL (dB)* Max IL (dB)* Return loss (dB)MTP Elite (MM) 0.10 0.35 N/AMTP (MM) 0.20 0.60 N/ALC/ SC (MM) 0.20 0.30 N/AMTP Elite (SM) 0.10 0.35 >60MTP (SM) 0.25 0.75 >60LC/ SC (SM) 0.15 0.30 >55(UPC)/60(APC)

*Per Mated Pair

Central Office Solutions

ODCF ODCF ODCF ODCF ODCF ODCF ODCF ODCFMT Connector Type

MT Connector Type

Fan-out connector Type(APC /UPC/ PC)

Length excluding Fanout

Shortest branch length

Fiber Type Connector color

Polarity

ME MTP Elite

A 12F SCA SC/APC SX 010 1 Meter

01 0.1 Meter

OM3 OM3 GN Green A A

MT MTP B 24F SCU SC/UPC SX 015 1.5 Meter

05 0.5 Meter

OM4 OM4 BL Blue B B

SCP SC MM SX 150 15 Meter

10 1.0 Meter

OS2 G652D BG Beige X Other

LCA LC/ APC SX

7A1 G657A1 HV HV

LCU LC/ UPC SX

7A2 G657A2 AQ Aqua

LCP LC MM SX

SDA SC/APC DX

SDU SC/UPC DX

SDP SC MM DX

LDA LC/ APC DX

LDU LC/ UPC DX

LDP LC MM DX


Ordering Information


Introduction

Email: [email protected] Phone: +1 703 653 1130 Website: opterna.com OpternaR

Mt Array Trunk Cable Assemblies™

The Opterna MT trunk cable assemblies are used for high density backbone cabling in data centers and other environments with high fiber density. Manufactured in our state-of-the-art facilities, they offer rapid deployment, high density and maximum space utilization combined with significant time and cost savings. The Opterna MT trunk cable assemblies are available in a wide range of multimode and single mode fiber types. The compact micro tube cables greatly reduce the total volume of cables and help to optimize the cable management.

Introduction

• Standard fiber counts of 12, 24, 48, 72 and 144 fibers, others available on request • Available in all fiber types - SM and MM • 100 % factory terminated and tested - saves times and guarantees high performance • Standard LSZH outer sheath, PE and OFNP available on request • Standard Polarity A, all other types available on request • Optimized performance using highest quality connectivity components MTP® Standard and MTP® Elite connectors • 40 & 100G ready • 12 or 24 fibers in one compact MT connector

Features “Data Center Conectivity MT Array Trunk Cable Assemblies”


Email: [email protected] Email: [email protected]: +1 703 653 1130 Phone: +1 703 653 1130Website: opterna.com Website: opterna.comOpterna OpternaR R

Mt Array Trunk Cable Assemblies™

• Data center and telecommunication networks

• High density connection between active equipment and distribution architectures

• Gigabit Ethernet, Local Area Networks, Wide Area Networks, Storage Area Networks

• Backbone links for CATV and video transmission

• High density FTTX applications

Parameter Table Fiber count 12F 24F 48F 72F 144FConnectors Female 12 or 24F MTP® or MTP Elite® (MPO on request)Cable type Micro fiber indoor cable with micro tubeFiber types G652D, OM3, OM4 (Others on request)Cable diameter (mm) 3.5 4.6* 10.6* 12.6* 19.5*Cable weight (kg/ km) 12.5 14.6 105 155 336Bending radius 20 x cable diameter (10 x cable diameter without load)

Operating temperature °C 0 to +60Compliance ISO/IEC 60793, ISO/IEC 60794, IEC 60332, TIA-604-5, IEC 61754-7, ISO/IEC 11801,

TIA-568-C, EIA/TIA-526-7&14A, RoHS* Or over sheathed individual 3.5mm 12F cables

Connector type Average IL (dB)* Max IL (dB)* Return loss (dB)MTP Elite (MM) 0.10 0.35 N/AMTP (MM) 0.20 0.60 N/A

0.10 0.35 >60MTP (SM) 0.25 0.75 >60

* Per mated pair


ODCF ODCF ODCF ODCF ODCF ODCF ODCF

Both Sides Connector

MT Connector Type

Fiber Count Length Excluding Branches (Equal to Total Length If No Branches)

Shortest Branch Length

Fiber Type Polarity

ME MTP Elite

A 12F 012 12 001 1 Meter

01 0.1 Meter OM3 OM3 A A

MT MTP B 24F 024 24 010 10Meters

05 0.5 Meter OM4 OM4 B B

048 48 100 100Meters

10 1.0 Meter OS2 G652D X Other

072 72 00 No Branches XXX Other

144 144

XXX Other

Ordering Info:

Mt Array Trunk Cable Assemblies™Central Office

Solutions

Applications:

Email us at: [email protected] Call us at: +1 703 653 1130 Visit our website at: opterna.com

Intergrated Collector/Terminal Plate Assembly™

The MultiOpt Collector/Terminal Plate (CTP) combines the functionality of a Collector Plate and a Terminal Plate in one assembly. Two models are available; 72-fiber and a 144-fiber. Both models feature a terminal section that accommodates cables drop with diameters of up to 4.8mm. The 72-fiber model features 6 MT ports and 12 SC/APC ports. One MT port is dedicated to the adjacent 12 SC/APC ports thereby allowing the flexibility of the remaining MTs to be utilized for connecting up to 5 additional TPA’s. The 144-fiber model features 12 MT ports and 24 SC/APC ports. Two MT ports are dedicated to the adjacent 24 SC/APC ports thereby allowing the flexibility of the remaining MTs to be utilized for connecting up to 10 additional TPA’s.

Introduction

• Designed for MDU applications

• Integrated Collector and Terminal functionality

• 50’, 100’, 200’ and 350’ stub lengths

• Riser and Indoor/Outdoor cable stub options

• Low insertion/return loss connectors

• Enclosureless design

• Grounding connection included

Features “MultiOpt Integrated Collector/ Terminal” Plate Assembly

MDU Solutions

Email us at: [email protected] Call us at: +1 703 653 1130 Visit our website at: opterna.com

Parameter 72-fiber model 144-fiber modelConnector type 6 MT (12 fiber) 12 MT (12 fiber)Connector count 12 SC/APC 24 SC/APCMT ports available for connection to other terminals

6 12

Plate dimensions 14.25 diameter x 5.25 in. heightDimensions 11.4”w x 11.4”h x

5.7”d

Intergrated Collector/Terminal Plate Assembly™ MDU Solutions


Fiber Sentinel System™

Opterna’s Fiber Sentinel System (FSS) is the answer to the security threats of your optical communication infrastructure. Optical communications systems are generally insensitive to anomalies below a certain level due to its wide optical budget considerations during network designing. Even a very well designed optical communication system will come across undetectable/ unnoticeable signal variations which if not identified instantly can pose a threat to your data protection and information security. Opterna’s Fiber Sentinel System uses WaveSense TechnologyTM to monitor such optical anomalies and provides continuous, real-time, protocol independent physical layer monitoring of a fiber optic communication system. It detects any signal variations (including tapping or signal injections), shuts down instantly and isolates affected path in milliseconds, re-routes the traffic to a back-up fiber path (which will also be monitored) and notifies the network administrator. Fiber Sentinal System thus offers security, network integrity, reliability and redundancy to your optical network.

Introduction

• Automatically identifies, differentiates, and characterizes nine distinct optical event types like intrusions, optical signal injection by an intruder, cable breaks, transients, receiver overloads, low optical signal levels, loss of data signal, FSS power off conditions and fiber degradation. • Fiber Sentinel System is non-evasive • Monitors the optical carrier • Does not decode the data on the optical carrier • Optical path redirected by photon switching • Fully passive - data remains in its optical state and is not regenerated • Available in two SNMP versions • Provided with Fiber Sentinel user interface.

Features “Fiber Sentinel System”

MonitoringSolutions



• Telecommunications networks • CATV networks • Secure data processing networks • Government Communications and military infrastructure• Communication infrastructure for Law Enforcement, Banking and Intelligence


Electrical

Power input interface IEC 320, 3 positions

Input Voltage 100 – 240V, 60/50Hz

Dimensions & Approvals

Dimensions 19” rack mountable, 1U 17” x 13” x 1.75”

Approvals FCC Part 15J Class A,CE, UL 1950 - third edition

Monitoring Solutions

Environmental

Operating Temp erature 0 C to 550C (32 F to 130 F)

Storage Temperature -10 C to 65 C (14 F to 150 F)

Humidity (operational) 0% - 90%, non condensing

Humidity (stroage) 0% - 95%, non condensing

Diagnostic LEDs Power status, Tx & Rx status Primary and backup paths Link/Activity, Ethernet SNMP Port


General

Operating wavelength 1310nm

Protocols supported Protocol independent

Insertion loss 1.5dB typical, 2.4dB maximum

Minimum Channel strength -45dBm

Maximum Channel strength +5dBm

Monitoring resolution 0.02dB

Intrusion shutdown time 25ms typical

Backup Path switching time < 4ms

Data channel cable type Singlemode

Data channel connector type SC duplex, FC (optional), ST (optional)

Network management SNMP via Ethernet interface, RS232c console port

Monitoring Solutions

Applications:


Distribution Terminal Plate Assembly™

The MultiOptTM Terminal Plate (TPA) is an innovative solution for fiber distribution to living units in a Multi-Family Dwelling Unit environment. The MultiOpt TPA features a plate-mounted rotating spool, on which the fiber tail is stored and fiber cable slack is stored. After mounting the TPA, the installer simply unlocks the spool and pays out the desired length of fiber tail utilizing the supplied pulling eye. The pre-terminated tail can then connect to an Opterna Collector Plate or Collector/Terminal Plate. The TPA may also connect directly to Opterna’s TurnOpt FDH. TPA models are available with one or two fiber tails, with standard stub lengths of 50’, 100’, 200’ and 350’. Each tail is terminated with 12-fiber low loss MT connectors. TPA is available in either 12 fiber or 24 fiber options. Drop cables up to up to 4.8mm in size are supported.

Introduction


• Innovative rotating fiber storage spool

• One or two 12-fiber MT connector tails, supports 12 or 24 drops • 50’, 100’, 200’ and 350’ stub lengths

• Supports up to 4.8mm cables and splice on connectors

• Wall-mount design

• Convenient pulling-eye included with each MT-connector

Features “MultiOpt Distribution Terminal Plate Assembly”

MDU Solutions


Parameter Specification

Tail connector type MT (12 fiber)Fiber drop connector type SC/APCFiber drop cable diameter Up to 4.8mmDimensions 11.4”w x 11.4”h x 5.7”d

Distribution Terminal Plate Assembly™MDU Solutions


Collector Plate Assembly™

The MultiOptTM Collector Plate Assembly (CPA) is an integral component of Opterna’s fiber connectivity system for Multi- Family Dwelling Unit applications. The MultiOpt CPA provides an intergration point between the FDH and the MultiOpt Terminal Plate, enabling a “Zone” or distribution network design for MDUs. Two models are available, a 72-fiber Collector Plate that serves up to six 12- port Terminals, and a 144-fiber model that serves twelve 12- port or six 24-port Terminals. The CPA features a bend-insensitive fiber cable stub that is pre- terminated with six or twelve 12-fiber MT connectors. Riser- rated or Indoor/Outdoor cable stubs options are available in 50’, 100’, 200’ and 350’ lengths. The MultiOpt Collector Plate is designed to give installers flexibility in selecting mounting/installation options in MDUs, such as walls, panels or exisiting/brownfield enclosures. The Collector Plate includes a ground connection, four mounting holes, and a mounting template/installation guide.

Introduction


• Six or Twelve Pre-terminated 12-fiber MT connections

• 50’, 100’, 200’ and 350’ stub lengths


• Low insertion/return loss connectors

• Small foot print enclosureless/wall mount design

Features “MultiOpt Collector Plate Assembly”

MDU Solutions


Parameter 72-fiber model 144-fiber model

Connector type MT (12 fiber) MT (12 fiber)

Connector count 6 12

Stub cable diameter 0.52 in. 0.59 in.

Plate dimensions 10.5 x 9 x 4 in.

Dimensions 11.4”w x 11.4”h x 5.7”d

Collector Plate Assembly™ MDU Solutions





OpternaROpternaR

Visit: Opterna.comDSODCTrev1

Fiber Optic Multi Loose Tube Cable

Opterna fiber optic dielectric single jacket multi loose tube cable is a UV-stabilized, fully water blocked cable for Indoor & Outdoor duct applications.

The loose tube design provides stable and highly reliable transmission parameters for a variety of voice, data, video and imaging applications.

This lightweight cable offers durability and flexibility required for many outside plant uses.

RoHS (Restriction of the use of Certain Hazardous Substances Directive) Complied

Introduction

• Multi loose tube construction

• Lightweight

• Each fiber is color coded for easy identification

• Color coded loose tubes for easy identification

• LSZH jacket for Indoor/outdoor applications

Features: All Dielectric Single Jacket Non Armor Multi Loose Tube

OSP Solutions

Optical FiberFilling Compound

Loose Buffer TubesCore Wrapping TapesBlack PE/LSZH Jacket

Water Blocking Yarn or Jelly

Outer strength MemberRipcordCentral strength Member

36-Fiber Cable

1/3





OpternaROpternaR

Visit: Opterna.comDSODCTrev1


• Building Interconnections (Campus LAN)

• FTTx applications

• CCTV applications

• Telcordia GR-20-CORE

• IEC 60793 / IEC 60794

• IEC 60332-1,3

• IEEE 383

• Fiber - Singlemode OS2 - G.652.D, 62.5μm (OM1), 50μm (OM2, OM3 & OM4) multimode available

Applications:

Standards:

Options:

Color of Buffer:

Transmission Performance:

OSP Solutions

Optical Fiber 62.5/125 μmOM1

(850/1300)

50/125 μmOM2

(850/1300)

50/125 μmOM3

(850/1300)

50/125 μmOM4

(850/1300)

9/125 μmOS2

(1310/1550)

Attenuation (dB/km) Typical values 3.5/1.0 3.0/1.0 3.0/1.0 3.0/1.0 0.40/0.30

Minimum Bandwidth (MHz •km) 200/500 500/500 1500/500 3500/500 -

Ethernet Link Distance (m)

10Gbps - - 300 550 -

1Gbps 275/550 550/550 - - -

01 - Blue 05 - Slate 09 - Yellow

02 - Orange 06 - White 10 - Violet

03 - Green 07 - Red 11 - Pink

04 - Brown 08 - Black 12 - Aqua

2/3





OpternaROpternaR

DSODCTrev1Visit: Opterna.comVisit: Opterna.com


OSP Solutions


Mechanical & Environmental:

Ordering Info:

Shipping Information:

FiberCount

NominalDiameter

NominalWeight

Maximum Tensile Load Crush Load Minimum Bend Radius

Short Term Long Term Short Term Long Term Loaded Installed

[mm] [kg/km] [N] [N] [N/cm] [N/cm] [mm] [mm]

6 10.5/11.2 86/115 2,700 1000 110 55 210/224 105/112

12 10.5/11.2 86/115 2,700 1000 110 55 210/224 105/112

24 10.5/11.2 86/115 2,700 1000 110 55 210/224 105/112

36 10.5/11.2 86/115 2,700 1000 110 55 210/224 105/112

48 11.0/11.7 92/130 2,700 1000 110 55 220/234 110/117

72 11.0/11.7 92/130 2,700 1000 110 55 220/234 110/117

96 12.1/13.7 113/167 2,700 1000 110 55 240/274 121/137

120 13.6 139 2,700 1000 110 55 270 136

144 15.0 167 2,700 1000 110 55 300 150

228 15.8 178 2,700 1000 110 55 320 158

276 17.0 212 2,700 1000 110 55 340 170

300 17.7 228 2,700 1000 110 55 350 177

Storage Temperature : -40 to + 75°C / Operating Temperature : -20 to + 70°C

*Denotes norminal value for PE / LSZH Jacketed Cable.

XXX : OS1, OS2, 7A1, 7A2, 7B2, 7B3, 655, OM1, OM2, OM3, OM4YYY : Number Of cores

*Other Cable lengths may be available upon request

FC-XXX-MLT-NA-YYY-PE Fiber Optic Single Jacket Non Armor Multi Loose Tube, PE jacket

FC-XXX-MLT-NA-YYY-LZ Fiber Optic Single Jacket Non Armor Multi Loose Tube, LSZH jacket

Standard Reel Length 4000m

3/32/3





OpternaROpternaR

Visit: Opterna.comDSAMCPrev1 1/2

BuildOpt™ Collector Plate Assembly (CPA)

The Opterna® BuildOpt CPA is a collection point for plug-and-play fiber distribution terminals, enabling a complete fiber distribution system for MDU and other FTTx applications.

Two models are available: a 72-fiber CPA with six MPO ports (12 fibers per MPO port), and a 144-fiber model with twelve MPO ports. The 12-fiber cable tails from BuildOpt Terminals plug into the CPA MPO ports.

The CPA cable stub consists of bend-insensitive single mode fiber arranged in 12-fiber ribbons. Riser-rated and Indoor/Outdoor cable stubs are available in 100’, 200’ and 350’ lengths.

The BuildOpt CPA is designed for enclosureless or 3rd-party enclosure applications. The metal mounting plate includes a ground connection and four mounting holes.

Contact Opterna today for more information on the BuildOpt Series and other innovative FTTx solutions.

Introduction

• Designed for MDU and other FTTx applications

• Six or Twelve 12-fiber MPO connections

• Extremely low connector insertion loss and return loss



• 100’, 200’ and 350’ stub lengths

Features Collection Point for MPO Terminations

MDU Solutions





OpternaROpternaR


BuildOpt™ Collector Plate Assembly (CPA)

• Multi-Family Dwelling Units

• Multi-Tenant

• Commercial/Industrial fiber networks

Applications:

Specifications:

Ordering Info:

MDU Solutions


72-fiber model 144-fiber model

Cable type 12-fiber ribbon, Riser or Indoor/Outdoor

Fiber type G.657.A bend insensitive single mode

Cable jacket diameter 0.52 inches 0.60 inches

12-fiber MPO Ports 6 12

Connector Insertion Loss 0.3 dB

Return Loss > 65dB

Plate Material Metal

Dimensions 10.5 x 9 x 3.5 inches

265 x 227 x 89 mm

Listings UL, cUL (or cETL)

Part Number Fiber Count Cable Type Cable Length (ft)AMCP6-1MMNC-100 72 riser 100

AMCP6-1MMNC-200 72 riser 200


AMCP6-2MMNC-100 72 Indoor/Outdoor 100













OpternaROpternaR

Visit: Opterna.comDSACTPrev1 1/3

BuildOpt™ Collector/Terminal Plate (CTP)

The Opterna® BuildOpt Collector/Terminal Plate combines the functionality of a Collector and Terminal in one assembly, providing integrated fiber distribution in a high-rise building and other FTTx applications.

The 72-fiber CTP consists of 6 MPO and 12 SC/APC ports. One MPO port is dedicated to the 12 SC/APC ports; the remaining 5 MPO’s are available for connection to BuildOpt Terminals. A 144-fiber model features 12 MPO and 24 SC/APC ports; 2 MPO ports are dedicated to the 24 SC/APC ports and 10 are free for Terminal connections.

The bend-insensitive ribbon fiber stub is available in riser-rated and Indoor/Outdoor cable, with stub lengths of 100’, 200 and 300’. The cable management features of the Terminal section accommodate up to 4.8mm diameter drop cables.

The BuildOpt CTP is designed for enclosureless or 3rd-party enclosure applications. The metal mounting plate includes a ground connection and four mounting holes.


Introduction

• Designed for MDU and other FTTx applications

• 72 or 144 fiber channels, 12 or 24 terminal ports

• Extremely low connector insertion loss and return loss



• 100’, 200’ and 300’ stub lengths

Features Integrated Collector and Terminal

MDU Solutions





OpternaROpternaR




• Multi-Tenant


Applications:

Specifications:

MDU Solutions

72-fiber model 144-fiber model

Cable type 12-fiber ribbon, Riser or Indoor/Outdoor

Fiber type G.657.A bend insensitive single mode

Cable jacket diameter 0.52 inches 0.60 inches

SC/APC Terminal Ports 12 24

12-fiber MPO Ports Available for connection to other terminals

5 10


Return Loss > 65dB


Dimensions 14.25 dia x 5 inches

362 dia x 130 mm

Listings UL, cUL (or cETL)





OpternaROpternaR


Visit: Opterna.com

Ordering Info:


Part Number Fiber Count Cable Type Cable Length (ft)

ACTP6-1MMNC-100 72 riser 100



ACTP6-2MMNC-100 72 Indoor/Outdoor 100









MDU Solutions






OpternaROpternaR

Visit: Opterna.com

BuildOpt™ Terminal Plate Assembly (TPA)

The Opterna® BuildOpt TPA is an innovative solution for plug-and-play fiber distribution to living units in a Multi-Family Dwelling Unit environment and other FTTx applications.

Ideal for surface-mount applications where an enclosure is not needed, the BuildOpt TPA features a plate-mounted rotating spool, on which the fiber cable tail is stored during shipment. After mounting the TPA on the wall, the installer simply unlocks the spool and pays out the desired length of cable tail. The installer then reels in the excess cable for safe storage and locks the spool.

The MPO-terminated tail can connect to an Opterna BuildOpt Collector, Collector/Terminal Plate (CTP) or a TurnOpt™ FDH.


Introduction


• One or two 12-fiber MPO connector tails

• 12 or 24 SC/APC subscriber ports

• 100’, 200’ and 350’ tail lengths

• Supports up to 4.8mm drop cables

Features Rotating Fiber Storage Spool

MDU Solutions

DSADTPrev1 1/2





OpternaROpternaR

Visit: Opterna.com

BuildOpt™ Terminal Plate Assembly (TPA)


• Multi-Tenant


Applications:

Specifications:

Ordering Info:

MDU Solutions


Cable 12f flat ribbon riser

Fiber G.657.B3 bend insensitive single mode


Return Loss > 65dB


Dimensions 11.4 x 11.4 x 5.7 inches

290 x 290 x 145 mm

Safety UL, cUL

Parameter Subscriber Ports Cable Tail length

ADTPA-1SAFM-100 12 100



ADTPB-1SAFM-100 24 100



DSADTPrev1 2/2





OpternaROpternaR

Visit: Opterna.comDSATNrev1 1/3

Build-Out Attenuators

Opterna Build-out Attenuators (BOA) are used in communication systems to reduce optical power, launched onto photo detectors. These high performance devices are designed to give accurate attenuation over a wide range of wavelengths. The plug type design allows to use directly on the ends of the fiber jumpers and to insert directly in to the adapter.

Available in ST, FC, SC, LC, & MU styles with SPC, UPC & APC finish, BOA have high return loss and superior performance.

Opterna BOA comply strictly to the international standards and all fully compatible with other standard products

Introduction

• All passive technology

• Available in ST, SC, FC, LC, & MU versions

• Higher performance SPC, UPC & APC options

• Metal ion doped fiber

• Extreme stability in thermal variations

• GR-910-CORE COMPLIANT

• Broadband performance, Flat Spectral response

• Environmentally stable

• High Power Endurance

• Mating Durability: <0.2sB over 1000 cycles

Features Build-Out Attenuators

Fiber Interconnect & Passives





OpternaROpternaR


Build-Out Attenuators

• DWDMs

• Overpowered fiber optic systems

• Long-haul telecommunications

• Telecoms, CATV, LAN & WAN

• Fiber in the loop (FITL)

• PON & Fiber Optic Communications Systems

• Test & Measurement set up


Applications:

Specifications:

Package type SC, ST, FC, LC & MU

Available Range of attenuation 1 to 30 dB with 1dB increments (or custom attenuation within this range)

Operating Wavelength 1310nm and 1550nm (Or single wavelength)

Operating Band pass

Digital Band (Telcordia Spec.) 1260-1360nm and 1430-1580nm

S + C + L Band 1480-1610nm

Special Band pass 1310±25nm and 1470-1610nm

Single Window 1280-1340nm or 1510-1590nm

Dual Window 1310 and 1550nm (±25nm)

Attenuation ToleranceGrade

Premium Standard

Attenuators upto 5dB ± 0.5 dB ± 0.75 dB

Attenuators, 6 to 10dB ± 10% of attenuation ± 15% of attenuation

Attenuators,11dB to 19dB ± 10% of attenuation ± 15% of attenuation

Attenuators, 20dB to 30dB ± 10% of attenuation ± 15% of attenuation

Reflectance, SPC =50 dB

Reflectance UPC =55 dB

Reflectance, APC = 60 dB

Operating Temperature -40 to +75°C

Storage Temperature -40 to +85°C





OpternaROpternaR


Visit: Opterna.com

ATN

Attenuation Grade Package Style

Endface Finish Operating Wavelength

Band Pass

01 1 dB P Premium FC FC Style SPC SPC Finish, RL >50dB 1310 1310nm FC Single Window

02 2 dB S Standard SC SC Style UPC UPC Finish, RL >55dB 1550 1550nm SC Dual Window

03 3 dB and so on

ST ST Style APC APC Finish, RL >60dB 1315 1310 and 1550nm

ST S+ C+ L Band

30 Upto 30dB LC LC Style 1214 1260-1360 & 1430-1580nm

LC Special Band Pass

MU MU Style MU Digital Band(Telcordia)

Size & Dimensions:

Ordering Info:

Build-Out AttenuatorsFiber Interconnect

& Passives


FC Type MU Type

SC Type LC Type

(All dimensions in mm)





OpternaROpternaR

Visit: Opterna.comDSADrev1 1/3

Fiber Optic Adaptors

Opterna adaptors are manufactured using high quality, resilient sleeves which provide precise interconnectivity of connector ferrules resulting in low insertion and return loss. The sleeves are enclosed in high quality engineering plastic designed for all fiber optic connector types ensuring the corresponding connector parts dock well and are securely held.

Opterna adaptors are available in simplex, duplex and quad options which cater to the intermateabilityrequirements of any fiber network such as WAN, LAN, CATV, FTTx and testing. The adaptors are available in standard colors to distinguish between singlemode PC/APC and multimode PC types. Opterna adaptors conform strictly to international standards and are compatible with other manufacturers’ standard connectors and interface products.

Introduction

• Available for all Multimode and Singlemode types

• Available in plastic and metal housing

• Available in symmetrical and hybrid types

• High quality resilient ceramic and metal sleeves

• Easy installation with simple clamping mechanism

• Color coded for easy identification

• Mating Durability: 1000 cycles; <0.2 dB change

• Temperature range: -40 to +80°C

• IEC, EIA/TIA and GR-326-CORE compliant

Features Fiber Optic Adaptors






OpternaROpternaR



• Patchpanel and wall box connection interface

• FTTX deployments

• Pre-terminated assembly interconnection

• Telecoms, Data Centers, CATV, LAN & WAN

• Testing and inspection


Applications:

Size & Dimensions:

SC SIMPLEX ADAPTOR LC DUPLEX ADAPTOR

FC ADAPTOR ST ADAPTOR

LC QUAD ADAPTOR MPO ADAPTOR

Note: Other adaptor drawings available on request





OpternaROpternaR


Visit: Opterna.com

Ordering Info:


AD

Adapter Configuration

Connector Finish

Sleeve Type Configuration Housing Color

ST ST P PC P Phosphor Bronze

S Simplex BG Beige

SC SC flanged A APC C Zirconia D Duplex BL Blue

SF SC non-flanged X Adapterswithout sleeves

Q Quad GR Green

FC FC Single D type N NA AQ Aqua

FD FC Double D type HV Heather violet

FS FC Square type BK Black

LC LC on SCfootprint flanged

ME Metal

LF LC on SCfootprint non- flanged

LR LC on RJ 45footprint flanged

LN LC on RJ 45footprint non- flanged

MU MU

ME MTP ELITE

MX MPO PREMIUM

MT MTP

MP MPO

MJ MTRJ

SA SMA







OpternaROpternaR

DSFC1rev1Visit: Opterna.com

Fiber Optic Breakout Cable

Opterna fiber optic breakout cables are rugged, high performance optical communication cables suitable for inside plant installations. Fiber optic breakout cable contains multiple individual fibers each with its own aramid strength member and jacket which makes the cable more reliable and rugged for critical applications.

Breakout Cable is designed for routing cables to different locations and direct termination of fibers in the field. The cable is also suitable for pre-terminated cable assemblies.

Introduction

• Short and moderate distance links within a building, where multiple termination points are needed

• OFNR (riser rated), OFNP (plenum rated) or LSZH (low smoke zero halogen rated)

• Direct Termination on 2.0 mm Sub-Units

• RoHS (Restriction of the use of Certain Hazardous Substances Directive) complied

Features: ONFR (rated), OFNP (Plenum rated) or LSZH rated

OSP Solutions

Optical Fiber2.0mm Sub-Unit

Central atrengthMemberRipcordPVC Outer jacket

Sub-unit Jacket

Aramid Yarns0.9mm buffered Fiber

1/3





OpternaROpternaR



• Backbone & Computer Room Cabling

• CCTV, Factory automation, Utility segments

• Pre-terminated cable ass

• ISO/IEC 11801


• ANSI/ ICEA S-83-596

• Fiber - Single mode, 50, 62.5μm multi mode available

• Higher fiber counts available upon request

• Other Sub-Unit Diameters Available (1.8mm, 2.4 mm, 2.9mm etc.)

• Buffered fiber : Natural (white)

• For Sub-unit & Outer Jacket color

- Single Mode 9/125 : Yellow

- 62.5/125 OM1 1Gbe : Orange

- 50/125 OM2 1Gbe : Orange

- 50/125 OM3 10Gbe : Aqua

- 50/125 OM4 10Gbe : Heather Violet

The identification code & number is printed on the sub-unit

jacket every 10 cm (eg. 62.5MM#1, 62.5MM#2)

Applications:

Specifications:

Options:

Subunit Identifications:

OSP Solutions

2/3





OpternaROpternaR

DSFC1rev1Visit: Opterna.comVisit: Opterna.com


OSP Solutions



(850/1300)

50/125 μmOM2

(850/1300)

50/125 μmOM3

(850/1300)

50/125 μmOM4

(850/1300)

9/125 μmOS2

(1310/1550)




10Gbps - - 300 550 -

1Gbps 275/550 550/550 - - -


Mechanical Characteristics:

Ordering Info:

FiberCount

NominalDiameter

NominalWeight




2 7.5 50 660 300 35 13 150 75

4 7.7 55 660 300 35 13 154 77

6 8 65 660 300 35 13 160 80

8 9.5 85 660 300 35 13 190 95

12 10.5 95 1320 660 35 13 210 105

Storage Temperature : -20 to + 70 / Operating Temperature : -10 to +60 °C

XXX : OS1, OS2, 7A1, 7A2, 7B2, 7B3, 655, OM1, OM2, OM3, OM4YYY : Number of CoresZZ : YL, OR, AQ, HV

FC-XXX-BTC-NA-YYY-LZ-ZZ

FC-XXX-BTC-NA-YYY-NR-ZZ

FC-XXX-BTC-NA-YYY-NP-ZZ

3/32/3





OpternaROpternaR


Fiber Optic Central Loose Tube Cable

Opterna single jacket single armored central loose tube cable is a UV-stabilized, fully water blocked cable for outdoor duct and direct burial applications.

The loose tube design provides stable and highly reliable transmission parameters for a variety of voice, data, video and imaging applications.

This lightweight cable offers durability and flexibility required for many outside plant application.

Compact design for limited conduit space, the cables are well suited for campus-type environments in and between buildings without building entry joints.

RoHS (Restriction of the use of Certain Hazardous Substances Directive) complied.

Introduction

• Central loose tube construction

• Lightweight

• Compact design for limited conduit space


• LSZH jacket for Indoor/outdoor applications

Features: Single Jacket Single Armor Central Loose Tube Cable

OSP Solutions

Optical FiberFilling Compound

Loose Buffer Tubes

Steel Tape Armor

Outer PE/LSZH JacketRipcord

Steel Wires12-Fiber Cable

Water Swellable Tape

1/3





OpternaROpternaR



• Building Interconnections (Campus LAN)

• FTTx & Telecommunications Networks


• IEC 60793 / IEC 60794

• IEC 60332-1,3

• Fiber - Singlemode OS2 - G.652.D, 62.5μm (OM1),50μm (OM2, OM3 & OM4) multimode available

Applications:

Standards:

Options:

Color of Buffer:


OSP Solutions


(850/1300)

50/125 μmOM2

(850/1300)

50/125 μmOM3

(850/1300)

50/125 μmOM4

(850/1300)

9/125 μmOS2

(1310/1550)




10Gbps - - 300 550 -

1Gbps 275/550 550/550 - - -

01 - Blue 07 - Red 13 - Blue / Single stripe 19 - Red / Single stripe

02 - Orange 08 - Black 14 - Orange / Single stripe 20 - Natural

03 - Green 09 - Yellow 15 - Green / Single stripe 21 - Yellow / Single stripe

04 - Brown 10 - Violet 16 - Brown / Single stripe 22 - Violet / Single stripe

05 - Slate 11 - Rose 17 - Slate / Single stripe 23 - Rose / Single stripe

06 - White 12 - Aqua 18 - White / Single stripe 24 - Aqua / Single stripe

2/3





OpternaROpternaR



OSP Solutions



Ordering Info:


Construction FiberCount

NominalDiameter

NominalWeight




Single Jacket/

Single Tube

2 10.4 130 1500 600 220 110 208 104

4 10.4 130 1500 600 220 110 208 104

6 10.4 130 1500 600 220 110 208 104

8 10.4 130 1500 600 220 110 208 104

10 10.4 130 1500 600 220 110 208 104

12 10.4 130 1500 600 220 110 208 104

16 10.4 130 1500 600 220 110 208 104

18 10.4 130 1500 600 220 110 208 104

24 10.4 130 1500 600 220 110 208 104


*Denotes norminal value for PE / LSZH Jacketed Cable.

XXX : OS1, OS2, 7A1, 7A2, 7B2, 7B3, 655, OM1, OM2, OM3, OM4YYY : Number of Cores


FC-XXX-CLT-SA-YYY-LZ Fiber Optic Single Jacket Single Armor Central Loose Tube, glass yarn, LSZH jacket

FC-XXX-CLT-SA-YYY-PE Fiber Optic Single Jacket Single Armor Central Loose Tube, glass yarn, PE jacket


3/32/3

OpternaROpternaR






Fiber Optic Connectors

Opterna fiber optic connectors are made with precision and high quality ceramic ferrules and provide a highly reliable connection when used with the various adapters. All standard fiber optic connector such as SC, ST, FC which use 2.5mm ferrule and small form factor connectors such as LC & MU which use 1.25mm ferrule are available. Opterna fiber connector series also has multi-fiber connectors like MTRJ and MTP/ MPO as well. They are available in single-piece option which provides ease of installation in field application and multi-piece options that are generally applicable for use in termination houses. Available in Duplex, Simplex, MM and SM options with PC, UPC and APC finishes with standard color coding for ease of identification.

These connectors are suitable for 900μm and 2-3mm cable. They strictly conform to international standards and provide consistent long-term mechanical and optical performance.

Introduction

• Options for Multimode and Singlemode

• Higher performance Ultra and Angled PC connector options

• Pre-radiused ferrule for PC (physical contact) or SPC (super physical contact) polishers

• Plastic and metallic housing

• Complies with Telcordia GR-326-CORE

• Insertion loss: <0.3dB (connector related)

• Return loss: >50 dB (UPC)

• Return loss: >60 dB (APC)

• Mating Durability: 1000 cycles; <0.2 dB

• Temperature range: -40 + 80°C (cable temperature performance may impose limitations)

Features: Fiber Optic Connectors

OSP Solutions

OpternaROpternaR







• All fiber interconnection

• Telecom Distribution and Local Area Networks

• Data Communication Systems

¹All connectors other than listed to the right

Applications:

Optical Performance:

Dimensional

Environmental & Mechanical:

OSP Solutions

Parameters

Parameters MM (1300nm) SM (1310nm &/or 1550nm)

All¹ SMA & MTRJ All¹ ¹All APC E-2000/ APC

Insertion Loss 0.30 0.50 0.30 0.30 0.30

Back reflection NA NA -50.0 -60.0 -70.0

Capillary Diameter (MM) 126 -0/ +3μm

(SM) 126 -0/ +1 μm

Ferrule Diameter 2.499mm ± 0.001

Temperature Cycling Test (IEC 874-1 clause 4.5.22) -40°C to +70°C, 20 cycles Change in attenuation ≤ 0.2dB

Mating Durability (IEC 874-1 clause 4.5.32) 500 mating cycles Change in attenuation ≤ 0.2dB

Axial Cable Retention Test (TIA/EIA-455-6B) 100N for 30 seconds retained at fully loaded condition; Change in attenuation ≤ 0.2dB

Impact Test (IEC 794-1-E4) Radial free fall at radius of 0.5m; 8 impacts Change in attenuation ≤ 0.2dB

Drop Test (IEC 874-1 clause 4.5.14) 25 drops from a drop height of 1.5m Change in attenuation≤ 0.2dB

Operating Temperature -40°C to 80°C (check cable temperature performance)

OpternaROpternaR






Visit: Opterna.com

Ordering Info:

OSP Solutions


Assembly type Channel Connector Type ConnectorFinish

Fiber Type Back Shell Dia./ Type

Connector Color Code

SCN Single piece SX Simplex ST ST connector P PC MM Multimode 28 2.8mm dia. BG Beige

MCN Multi-piece DX Duplex SC SC connector U UPC SM Singlemode 20 2.0mm dia. BL Blue

MF Multi-fiber SD SC duplex A APC 09 900um GR Green

FC FC connector XX Custom YL Yellow

LC LC connector RD Round BK Black

LD LC duplex RB Ribbon AQ Aqua

MU MU connector HV Heather Violet

MD MU duplex

E2 E-2000 connector

MJ MTRJ connector

FD FDDI connector

MP MPO

MT MTP

SA SMA


OpternaROpternaR






Fiber Optic Distribution Cable

Opterna fiber optic tight buffered distribution cables are rugged, high performance optical communication cables suitable for inside plant installations.

Ideally used in backbone or computer room cabling.

Introduction

• Tight buffered construction

• 900um buffered design for easy termination


• Compact design for limited conduit space

• RoHS compliant

Features: 900um tight buered glass yarn strength member

OSP Solutions

Coated CentralStrength Member

Ripcord

Outer Jacket

Sub-unit Jacket

Ripcord

Sub-Unit Construction Single Unit Construction

Optical Fiber

0.9mm Buffered Fiber

Glass Yarns

1/4

OpternaROpternaR







• Data centers• Indoor riser backbone applications

• TIA/EIA-568-C.3• ISO/IEC 11801 • Telcordia GR-409-CORE• ANSI/ICEA S-83-596

•IEC 60332-1, IEC 60754-2 & IEC 61034

• Fiber - Singlemode OS2 - G.652.D, 62.5 μm (OM1), 50μm (OM2,OM3, OM4) multimode available• For indoor/outdoor applications, outer cable jacket shall be black• For Sub-unit & Outer Jacket color- Single Mode 9/125 : Yellow- 62.5/125 1Gbe : Orange- 50/125 1Gbe : Orange

- 50/125 10Gbe : Aqua

- 50/125 10Gbe : Heather Violet

• The identification code & number is printed on the sub-unit jacket every 10 cm (eg. SM#1, SM#2)

• Outer jacket : PVC or LSZH (Low Smoke Zero Halogen)

Applications:

Standards:

Options

Color of Buffer:

OSP Solutions

01 - Blue 07 - Red 13 - Blue / Black dash 19 - Red / Black dash

02 - Orange 08 - Black 14 - Orange / Black dash 20 - Black / White dash

03 - Green 09 - Yellow 15 - Green / Black dash 21 - Yellow / Black dash

04 - Brown 10 - Violet 16 - Brown / Black dash 22 - Violet / Black dash

05 - Grey 11 - Pink 17 - Grey / Black dash 23 - Pink / Black dash

06 - White 12 - Aqua 18 - White / Black dash 24 - Aqua / Black dash

2/4

OpternaROpternaR







(850/1300)

50/125 μmOM2

(850/1300)

50/125 μmOM3

(850/1300)

50/125 μmOM4

(850/1300)

9/125 μmOS2

(1310/1550)




10Gbps - - 300 550 -

1Gbps 275/550 550/550 - - -


Cable Construction:

Construction of the Single-unit Cable

Number of Fibers 2 ~ 24

Type of fiber Single Mode* 9/125 μm (OS2 G.652.D),Multimode 62.5/125 μm (OM1),50 /125 μm (OM2,OM3, OM4)

Tight Buffer Coating Outer diameter: 900±50 μm

Dielectric Strength Member Glass yarn

Ripcord One ripcord (For 6 ~ 24 fiber cable)

Outer Jacket Material LSZH Compound

Construction of the Multi-unit Cable

Number of Fibers 18~144

Type of fiber Single Mode* 9/125 μm (OS2 G.652.D),Multimode 62.5/125 μm (OM1),50 /125 μm (OM2,OM3, OM4)

Tight Buffer Coating Outer diameter: 900±50 μm

Sub-unitNo. of the TightBuffered Fibers

6: For 18~36 Fiber Cable12 : For 48~144 Fiber Cables

DielectricStrength Member

Glass yarn

Sub-unit Jacket LSZH Compound

Dielectric CSM FRP or FRP with LSZH Coating

Ripcord Two ripcords

Outer Jacket Material LSZH Compound

OSP Solutions


3/42/4

OpternaROpternaR







OSP Solutions



Ordering Info:


Construction FiberCount

NominalDiameter

NominalWeight




Single Unit

2 4.5 25 660 300 50 13 70 45

6 5.3 30 660 300 50 13 90 60

8 5.7 35 660 300 50 13 90 60

10 6.0 40 660 300 50 13 105 70

12 6.7 50 660 300 50 13 105 70

16 8.4 70 1320 660 50 13 130 85

18 8.9 72 1320 660 50 25 130 85

24 9.8 75 1320 660 100 25 150 10

6 Fiber Subunits

24 14.8 155 1550 750 100 25 220 150


XXX : OS1, OS2, OM1, OM2, OM3, OM4YYY : Number of CoresZZ : YL, OR, AQ, HV


FC-XXX-TBC-NA-YYY-LZ-ZZ Fiber Optic Distribution Cable, 900um tight buffered glass yarn strength member, LSZH

FC-XXX-TBC-NA-YYY-NR-ZZ Fiber Optic Distribution Cable, 900um tight buffered glass yarn strength member, Riser

FC-XXX-TBC-NA-YYY-NP-ZZ Fiber Optic Distribution Cable, 900um tight buffered glass yarn strength member, Plenum


4/4





OpternaROpternaR


Fiber Optic Indoor Drop Cable

Opterna flat drop indoor cable is constructed with one or two single mode fiber protected by dielectric strength member made of fiberglass reinforced plastic (FRP) and a LSZH outer jacket.

Ideal for use in FTTx applications between the building’s main telecommunications room and the apartment/office consolidation point.

Utilizing a 250mm fiber, the cable unit is suitable for use with industry standard connector.

Introduction

• Robust and lightweight

• Colour coded fibers for easy identification

• LSZH jacket for internal use

• Standard cable length of 1 Km

Features: Fiber Optic Indoor Drop Cable

OSP Solutions

Outer Jacket

FRP Strength Member

Optical Fiber

1/32/3





OpternaROpternaR



• FTTx applications

• MDU / SDU

• ITU.T G.652D / G.657A

Applications:

Standards:

Cable Construction:

Color of Buffer:


OSP Solutions

Parameter Value

Primary Coating Color Layer 250 ± 15 μm

Dielectric Strength Member FRPØ 0.58 ± 0.05mm

Outer Jacket LSZH

1 core Drop Cable 01 Blue -

2 core Drop Cable 01 Blue 02 Orange

Fiber Types Maximum Attenuation: Value

G.652D/G.657A1 @1310nm@1550nm

0.4dB/km0.3dB/km

Maximum Dispersion ps/nm/km ≤3.5@1285~1339nm≤18@1550nm

Cutoff Wavelength nm <1260

Mode Field Diameter μm 9.2 ± [email protected] ± 0.8@1550nm

Core Clad Concentricity μm ≤0.5

Cladding Diameter μm 125 ± 1

2/3





OpternaROpternaR


Visit: Opterna.com


OSP Solutions



Cable Properties:

Ordering Info:

XXX : OS1, OS2, 7A1, 7B2, 7B3YYY : 001, 002

Temperature Range -40⁰C to +60⁰C

Fire Performance IEC 60332-1, IEC 60754-2 & IEC 61034

FC-XXX-DRPA-NA-YYY-LZ Fiber Optic Singlemode Indoor Drop Cable, LSZH

SheathColor

FiberCount

NominalDiameter

[mm]

NominalWeight

[Kg/Km]

Maximum Tensile Load Minimum Bend Radius Crush Resistance

Short Term

[N]

Long Term

[N]

Loaded[mm]

Installed[mm]

Short Term

[N]

Long Term

[N]652D 657A 652D 657A

White 1 or 2 2.0×3.0 ± 0.2mm 8 80 40 60 50 30 25 1000 500

3/32/3

Documents

Opterna datasheets 1