Optimization of air flow control process with the help of software and new measurement devices

Paper author: Mg.sc.ing. Dmitry IvancovScientific supervisor: Dr.sc.ing., professor Arturs Lesinskis

Riga, Latvia. 2012.

IntroductionNowadays construction rates are constantly increasing.

New technologies are always developing and presence of engineering technologies in the field of construction gradually overweights construction technologies.

Engineering networks and automatization systems

become more complex. To install and set them up additional testings and check-ups of system operations are required.

2

• Modern buildings incorporate more than 50 engineering systems. • Technical facilities of buildings increase constantly.

ES СТES

СТ

ES – engineering systems CT – construction technologies

SummaryKey idea of this proposal is launching software

based on algorithm developed by me. This software is designed for checking, testing, inspection, installation and regulation of aerodynamic systems.

Main part of data entries and analytical tasks solutions will be done by using resources of personal computer and software, and measuring equipment should work as sensor to read off main information and as wireless data transfer device.

3

The existing instruments

Wireless measuring

microclimate

4

Wireless measuring

5

ventilation systems

6

Wireless measuringTemperature Humidity

General opportunities of the program

program

The measurementsummary

Optimization of the instrument• Key aspects of instruments’ optimization:• division of analytical and measurement blocs,• connecting equipment with software.

8

Advantages: Easier and faster entering of data. Data is registered electronically. Number of errors is decreased. Only basic parameters are needed

to conduct measurements (Pa, m/s, °C, %RH).

New method of successive approximation

9

Thank you for your attention!

10