THE FIRST INTELLIGENT & HUMANISING EMERGENCY SHELTER

OPTIONS

www.hut.hutchinson.com

®

®

Ballast

Heating

Stanit

Sanikit

Tent: - Type of wall (window / full) - Options (double zip, vents, connection sleeve, ballast skirt,

hooking poin ts, drip hanging net) - Markings (wall, roof, removable section) - Colours (roof, wall, framework) - Accessories (cover, junction)

CONTENTS

®

TENT - Type of wall*

WALL WITH WINDOW

White polyester wall with a clear PVC zone centred on the top of the wall.Zips in to replace a standard wall.

Clear window dimensions = 2.40m wide x 0.60m high in the central section (half-moon shape).

FULL WALL

Full white polyester wall, replaces the standard "door" wall.

Dimensions:Max. height in the = 2.60 m.Max. width at the base = 4.40 m.

(Customised marking optional)

* the Hut’ is delivered as standard with 4 central opening and closing system doors.

®

The presence of a double zip on the canvas means that it may be fitted with a wall and a junction at the same time.

Wall and junction sold separately.Option to be selected with the initial Hut'® order.

DOUBLE ZIP FOR WALL AND JUNCTION

TENT - Options

4 vents at the top of the roof to reduce wind load.

NB: Option to be selected with the initial Hut'® order.

VENTS AT THE TOP OF THE ROOF

300mm diameter connection sleeve, enables the insertion of a flexible blowing duct for a hot or cold air generator placed outside (not supplied).

Option to be selected with the initial Hut'® order.

CONNECTION SLEEVE FOR HEATING

®

Addition of 3 additional hooking points on each of the inflatable framework's 4 rolls.

May be used to hook on additional equipment (Net, etc.)

Option to be selected with the initial Hut'® order.NB: Suspension net optional.

Knitted black polypropylene net with 4 PVC hooks at each end. This net hooks between 2 inflatable Hut’® structures and enables drips to be suspended from it.

Assembled net dimensions:Width = 4.50 m approx.Stretched height = 1m approx.

NB: the additional hooking points (optional) must be ordered to be able to hook the net in the Hut’®.

ADDITIONAL HOOKING POINTS ON THE INFLATABLE FRAMEWORK

SUSPENSION NET FOR DRIPS OR OTHER ACCESSORIES

®

Wall with 10 cm skirt to increase the ground anchor for the walls.

Colour identical to the wall: White, blue, black or red.

Option to be selected with the initial Hut'® order.

BALLAST SKIRT ON WALL

®

Sublimation marking on a zone or the whole wall.

Option to be selected with the initial Hut'® or wall order*.

CUSTOMISED MARKING ON THE WALL

Sublimation marking on a zone or the whole roof.

Option to be selected with the initial Hut'® order*.

CUSTOMISED WALL MARKING

CUSTOMISED REMOVABLE MARKING

TENT - Markings

Removable, customised marking, to be attached with self-adhesive tape system.

Dimensions = 100 x 50 cm.

Option to be determined during an initial Hut'® order*.

* A Print Proof will be sent for signature to validate the marking launch.

®

Roof in different colour from the basic colour (white). It may be fully black, blue, red, grey, green, yellow or orange.

Option to be selected with the initial Hut'® order.

DIFFERENT-COLOURED ROOF

804C012 C368 C429 C200 C285 C6 C

200 C285 C6 C

- Roof / Cover:

- Doors / Rolls:Standard colours:

Inflatable framework in different colour from the basic colour proposed (red).

Colours available: Black, blue, white.

Option to be selected with the initial Hut'® order.

OPTIONAL COLOURED INFLATABLE FRAMEWORK

DIFFERENT-COLOURED WALL

Wall in different colour from the basic colour (white). It may be fully black, blue or red.

Option to be selected with the initial Hut'® order.

TENT - Colours

®

Technical characteristics:• White colour.• Forward width = 1.50m.• Double zip attachment.• Inflatable roll.• Stiffeners.• Optional banner with logo.

COVER FOR SHELTER WITH INFLATABLE FRAMEWORK

Polyester cover positioned in place of a standard wall and which enables the original wall to be kept thanks to its double zip.

TENT - Accessories

Polyester junction for shelters.

Enables 2 Hut’s® to be linked to each other.Zip in to replace 2 walls.

Dimensions:Max. width = 1m30.

HUT’® JUNCTION

Polyethylene ground mat.Dimensions = 6m x 6m.

Colours: black or white.

GROUND MAT

®

To be filled with water and hooked to the tent to provide ballast.

Kit with 4 PVC O-rings, with diameter 60cm and height 20cm once filled.

• Ballast weight = 20kg.• 2 black textile loops to move the ballast.• 3 straps to hook it to the inflatable

framework structure.

KIT WITH 4 O-RING SHAPED BLACK BALLASTS

Customisable.

To be filled with water and air hooked to the tent's pillars to provide ballast.

Kit with 4 PVC barrels, with diameter 42cm and height 60cm (approx.) once filled, comprising a filling valve (air or water) and a drainage valve.

- Ballast weight = 50kg.- 4 black textile loops to move the barrel.- 1 stainless steel hook for connection to the

inflatable framework.- 1 customisation cover.

KIT WITH 4 BARREL SHAPED BLACK BALLASTS

Ballast

®

RADIATING HEATING SYSTEM

Technical characteristics:

This heating must be connected to a generator or a 220v / 16A socket and enables the interior of the Hut’® to be heated in a few seconds.

- Dimensions = 48x24x20 cm.- Net weight = 5kg.- Delivered with 2 hooking straps.- Handle to transport the appliance.- Power = 2000 watts.- Voltage = 220/240v 50/60hz.- Special 3m orange T90 resistance anti-cutting cable with IP68 industrial schuko

plug.- IP protection index.- No air or dust movement.- Special dish that provides diffuse and even heat in a few seconds.- Enables a surface of around 14m2 to be heated.

Heating

®

• Gloss white• 25 precut electrostatic sheets• Format 60 x 80 cm

STANIT ROLL: VELLEDA ELECTROSTATIC SHEETS

The Stan‘It is a roll of white electrostatic sheets which grip to most smooth surfaces (windows, walls, totem, tables, vehicles, etc.) and so provide a instant writing space when on the move.It is a magnificent communication and action tool in the field.

®

• 1 cover Diameter= 60cm / h= 15cm.• 1 khaki-coloured cabin, open cabin dimensions =1.90 x 1.20 x 1.20m• 1 folding cardboard WC, dimensions 27x27x46 cm.• 12 absorbent hygienic sacks.• 1 roll of toilet paper.• 1 assembly plan (assembly time < 5 minutes).

KIT composition:

SANIKIT: QUICK ASSEMBLY CABIN WITH SANITARY KIT

The complete SANIKIT is delivered in a cover 60cm in diameter and 15cm high, weighing 3.4kg.

Febr

uary

201

9 D

ocum

enta

tion

non

con

trac

tual

. Hut

chin

son

rese

rves

the

rig

ht t

o m

odif

y in

form

atio

n. D

esig

n: H

utch

inso

n. P

hoto

cre

dits

: Die

dre

Des

ign

& H

utch

inso

n.

®

www.hut.hutchinson.com

Rue Gustave Nourry45120 Châlette-sur-Loing - FRANCE

Contact : hut@hutchinson.com+33 2 38 94 49 91