Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]

  Modified 07-FEB-2011     Type BULLETIN     Status PUBLISHED  

Oracle® E-Business Suite Installation and Upgrade Notes

Release 12 (12.1.1) for Linux x86

February 2011

See Change Record

This document updates the following documentation with Linux x86-specific information for Oracle E-Business Suite Release 12 (12.1.1). Refer to the information contained here and to the appropriate manual when you install or upgrade your system.

Oracle E-Business Suite Installation Guide: Using Rapid Install (which is supplemented by Oracle Applications Release Notes and Oracle Applications NLS Release Notes)

Oracle E-Business Suite Upgrade Guide: Release 11i to Release 12.1.1

Oracle E-Business Suite Maintenance Pack (MP) Installation instructions

These documents respectively correspond to the following install/upgrade scenarios:

New Installations of Release 12.1.1 using the EBS Rapid Install wizard Upgrades of EBS from versions 11i to 12.1.1 using the EBS Rapid Install wizard

Upgrades of EBS from versions 12.0 (including 12.0 RUPs) to 12.1.1 using the Maintenance Pack (MP)

For Linux x86 installation and upgrade notes corresponding to the older Release 12.0.4 version, please see the My Oracle Support Document 402310.1.

Specific steps in this document may be conditional depending on the scenario and will be highlighted as such.

This document applies to 32-bit Linux operating systems on both the x86 and x86-64 hardware architectures. For Linux x86-64 (64-bit) operating systems on the x86-64 hardware architecture, see Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 (My Oracle Support Doc 761566.1) - please note that there are separate distributions of Release 12.1.1 for the Linux x86 (32-bit) and Linux x86-64 (64-bit) platforms.

Complete all operating system requirements, software requirements, and other requirements before installing or upgrading Oracle E-Business Suite

This document may be updated on a regular basis. Currently, it contains the following sections:

Certification Information Operating Systems Requirements

Software Requirements

Other Requirements

Before Installing or Upgrading

Installing or Upgrading

After Installing or Upgrading

Change Record

Documentation Accessibility

Certification Information

The latest certification information for Oracle E-Business Suite Release 12 is available on My Oracle Support's Certification tab:

http://support.oracle.com

Operating Systems Requirements

Oracle E-Business Suite is supported on various Linux 32-bit operating systems running on the x86 and x86-64 hardware architectures.

Operating System Supported Versions

The following table lists the supported operating system versions.

Operating System Name Supported Version

Oracle Linux 4 - Update 4 or higher (32-bit)

Oracle Linux 5 - Update 1 or higher (32-bit)

Red Hat Enterprise Linux 3 - Update 4 or higher (32-bit)*

Red Hat Enterprise Linux 4 - Update 4 or higher (32-bit)

Red Hat Enterprise Linux 5 - Update 1 or hgiher (32-bit)

SUSE Linux Enterprise Server 9 - SP3 or higher (32-bit)*

SUSE Linux Enterprise Server 10 - GA, SP1 or higher (32-bit)

*: only supported on the application (or middle) tier for upgrade customers in a multi-node system, or for both application and database tiers if the customer is on 10gR2. These OS'es are not supported for a new installation of 12.1.1 because version 11gR1 of the Database is delivered with Rapid Install and is not supported on these OS'es.

Kernel Requirements

The following table lists the required minimum kernel versions (to determine version, enter: $ uname -r): Operating System Kernel

Oracle Linux 4 2.6.9-42.0.0.0.1.EL

Oracle Linux 5 2.6.18-8.el5PAE

Red Hat Enterprise Linux AS/ES 3 2.4.21-27.EL

Red Hat Enterprise Linux AS/ES 4 2.6.9-42.EL

Red Hat Enterprise Linux 5 2.6.18-8.el5PAE

SUSE Linux Enterprise Server 9 2.6.5-7.244

SUSE Linux Enterprise Server 10 2.6.16.21-0.8

Required Packages

The following table lists the required packages and the minimum required versions for Linux (32-bit).

Additional Information: Refer to your vendor's operating system installation manual or the operating system media for information on obtaining and applying packages.

Operating System Required Packages

Oracle Linux 4* glibc-2.3.4-2.25

glibc-common-2.3.4-2.25

binutils-2.15.92.0.2-21

compat-libstdc++-296-2.96-132.7.2

gcc-3.4.6-3

gcc-c++-3.4.6-3

libgcc-3.4.6-3

libstdc++-3.4.6-3

libstdc++-devel-3.4.6-3

openmotif21-2.1.30-11.RHEL4.6**

pdksh-5.2.14-30.3

setarch-1.6-1

make-3.80-6.EL4

gnome-libs-1.4.1.2.90-44.1

sysstat-5.0.5-11.rhel4

compat-db-4.1.25-9

control-center-2.8.0-12.rhel4.5

xscreensaver-4.18-5.rhel4.11

libaio-0.3.105-2

libaio-devel-0.3.105

Oracle Linux 5*

Red Hat Enterprise Linux 5* (base and Advanced Platform)

Update 1 (5.1) or higher of Oracle Linux 5 is required

Update 1 (5.1) or higher of Red Hat Enterprise Linux (RHEL) 5 is required

The following i386 packages are not part of the OS distribution media and must be downloaded separately (from http://oss.oracle.com/projects/compat-oracle/files/Enterprise_Linux for both Oracle Linux 5 and RHEL 5) and installed manually:

openmotif21-2.1.30-11.EL5.i3861

xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386

For Update 1 or 2:

o binutils-2.17.50.0.6-6.0.1.i3862

For Update 3:

o binutils-2.17.50.0.6-9.0.1.i3862

For Update 4 (5.4) or higher, see workaround listed below in the 'After Installing or Upgrading' section.

The following i386 packages must be installed from the Oracle Linux 5 or RHEL 5 distribution media:

compat-glibc-2.3.4-2.26 compat-glibc-headers-2.3.4-2.26

gcc-4.1.2-14.el5

gcc-c++-4.1.2-14.el5

glibc-2.5-123

glibc-common-2.5-123

glibc-devel-2.5-12

glibc-headers-2.5-12

kernel-headers-2.6.18-128.el5

libgcc-4.1.2-14.el53

libstdc++-devel-4.1.2-14.el5

libstdc++-4.1.2-14.el53

make-3.81-1.13

gdbm-1.8.0-26.2.13

libXp-1.0.0-8.1.el5

libaio-0.3.106-3.23

libgomp-4.1.2-14.el5

sysstat-7.0.0-3.el5

compat-libstdc++-296-2.96-138

compat-libstdc++-33-3.2.3-61

Additionally, the following RPMs are required for an 11gR1 Database (which is bundled with the 12.1.1 release) on the database tier:

elfutils-libelf-devel-0.125 elfutils-libelf-devel-static-0.125

libaio-devel-0.3.106

unixODBC-2.2.11

unixODBC-devel-2.2.11

kernel-headers-2.6

Note:

1: The openmotif package version must be 2.1.30 (for example, openmotif-2.2.3-10.RHEL4.5 is not supported).2: This GNU linker (ld) version 2.17 provided by Oracle is required for relinking the modules in Advanced Planning & Scheduling (MSC, MSO, MSR) and Profitability Manager (FEMCCE) 3: This rpm is distributed as part of the 'default' installation of Enterprise Linux

Red Hat Enterprise Linux AS/ES 3*

glibc-2.3.2-95.27

glibc-common-2.3.2-95.27

binutils-2.14.90.0.4-35

compat-libstdc++-7.3-2.96.128

gcc-3.2.3-42

gcc-c++-3.2.3-42

libgcc-3.2.3-42

compat-gcc-7.3-2.96.128

compat-gcc-c++-7.3-2.96.128

libstdc++-3.2.3-42

libstdc++-devel-3.2.3-42

openmotif21-2.1.30-8**

pdksh-5.2.14-21

setarch-1.3-1

make-3.79.1-17

gnome-libs-1.4.1.2.90-34.1

sysstat-4.0.7-4.EL3.3

compat-db-4.0.14-5

libaio-0.3.96-5

libaio-devel-0.3.96-5

Red Hat Enterprise Linux AS/ES 4*

glibc-2.3.4-2.25

glibc-common-2.3.4-2.25

binutils-2.15.92.0.2-21

compat-libstdc++-296-2.96-132.7.2

gcc-3.4.6-3

gcc-c++-3.4.6-3

libgcc-3.4.6-3

libstdc++-3.4.6-3

libstdc++-devel-3.4.6-3

openmotif21-2.1.30-11.RHEL4.6**

pdksh-5.2.14-30.3

setarch-1.6-1

make-3.80-6.EL4

gnome-libs-1.4.1.2.90-44.1

sysstat-5.0.5-11.rhel4

compat-db-4.1.25-9

control-center-2.8.0-12.rhel4.5

xscreensaver-4.18-5.rhel4.11

libaio-0.3.105-2

libaio-devel-0.3.105-2

SUSE Linux Enterprise Server 9 glibc-2.3.3-98.61

gcc-3.3.3-43.24

gcc-c++-3.3.3-43.24

libgcc-3.3.3-43.41

libstdc++-3.3.3-43.24

libstdc++-devel-3.3.3-43.24

openmotif21-libs-2.1.30MLI4-119.1**

pdksh-5.2.14-780.7

make-3.80-184.1

gnome-libs-1.4.1.7-671.1

gnome-libs-devel-1.4.1.7-671.1

sysstat-5.0.1-35.1

binutils-2.15.90.0.1.1-32.10

db1-1.85-89

compat-2004.7.1-1.2

xscreensaver-4.16-2.6

libaio-0.3.102-1.2

libaio-devel-0.3.102-1.2

SUSE Linux Enterprise Server 10 Generaly Availability (GA) version of SLES 10 (10.0), or SLES 10 Service Pack 1 (10.1) or higher is required. The following 32-bit rpm packages must be installed from the SLES 10 distribution media:

binutils-2.16.91.0.5-23.4 compat-2006.1.25-11.2

compat-libstdc++-5.0.7-22.21

libstdc++-33.3.3.32

db1-1.85-101.2

gcc-4.1.0-28.4

gcc-c++-4.1.0-28.4

glibc-2.4-31.2

glibc-devel-2.4-31.2

libaio-0.3.104-14.2

libaio-devel-0.3.104-14.2

libgcc-4.1.0-28.4

libstdc++-4.1.0-28.4

libstdc++-devel-4.1.0-28.4

make-3.80-202.2

openmotif21-libs-2.1.30MLI4-143.2

Additionally, the following RPMs are required for an 11gR1 Database (which is bundled with the 12.1.1 release) on the database tier:

libelf-0.8.5

unixODBC-2.2.11

unixODBC-devel-2.2.11

Note:

1: GA (10.0), SP1 (10.1) and SP2 (10.2) only. Starting in SP3, the compat-libstdc++-5.0.7 package has been replaced by libstdc++-33.3 2: SP3 (10.3) and higher only

Footnotes:

*After installing these patches, run ldconfig -v.

**The openmotif package version numbering must be 2.1.30. For example, openmotif-2.2.3-10.RHEL4.5 is not supported.

JDK 6 Requirements

JDK 6 is bundled with Oracle E-Business Suite version 12.1.1.

Additional Information: Check the Sun Web site for any updates to the JDK 6 requirements for Linux (32-bit): http://java.sun.com/javase/6/webnotes/install/jdk/install-linux.html#requirements

Software Requirements

The following maintenance tools must be installed on all machines, and their locations specified both in the PATH of the account that runs Rapid Install and in the PATH of the accounts that will own the database tier and application tier file systems.

ar gcc

g++

ld

ksh

make

X Display Server

Other Requirements

The following are other requirements for Linux (32-bit).

Kernel Settings

Edit the /etc/sysctl.conf file to configure your kernel settings. After editing the file, use the "sysctl -p" command or restart the system to invoke the new settings.

Note: If the current value for any parameter is higher than the value listed in the following table, then do not change the value of that parameter.

The following table lists the kernel settings for Oracle Enterprise Linux 4 and 5, Red Hat Enterprise Linux AS/ES 3, 4, and 5 and SUSE Linux Enterprise Server 9 and 10:

Parameter Value

kernel.semmsl 2561

kernel.semmns 320001

kernel.semopm 1001

kernel.semmni 1421

kernel.shmall 2097152

kernel.shmmax Half the size of the physical memory (in bytes), and at least 21474836482

kernel.shmmni 4096

kernel.msgmax 8192

kernel.msgmnb 65535

kernel.msgmni 2878

fs.file-max 131072

net.ipv4.ip_local_port_range 10000 650003

net.core.rmem_default 262144

net.core.rmem_max 4194304

net.core.wmem_default 262144

net.core.wmem_max 262144

1: set using the following entry in the /etc/sysctl.conf file: kernel.sem = 256 32000 100 142 2: On the server running the EBS Database, this kernel parameter must be the lesser of half the size of the physical memory (in bytes) and 42949672953: values recommended for the local port range may need to be adjusted according to the specific needs of the user's environment in order to avoid port conflicts.

Domain Name System (DNS) Resolver Parameters

Two Domain Name System (DNS) resolver parameters (timeout and attempts) are set by default to low values when the operating system is installed. These low values may cause attempted network connections to an Oracle database to fail. If this happens, add or update the following entries to these minimum settings in the /etc/resolv.conf file on each server node:

options attempts:5options timeout:15

Verifying Host Names

Use the following to verify host name settings:

For Oracle Linux 4 and 5, and Red Hat Enterprise Linux AS/ES 3, 4 and 5:

1. Verify that the /etc/hosts file is formatted as follows: 2. 127.0.0.1 localhost.localdomain localhost

[ip_address] [node_name].[domain_name] [node_name]3. Verify that the /etc/sysconfig/network file is formatted as follows:

HOSTNAME=[node_name].[domain_name]4. If the /etc/sysconfig/networking/profiles/default/network file exists, remove it. 5. If you changed any files in the previous steps, restart the system.

For SUSE Linux SLES 9 and 10:

1. Verify that the /etc/hosts file is formatted as follows: 2. 127.0.0.1 localhost.localdomain localhost

[ip_address] [node_name].[domain_name] [node_name]3. If you changed any files in the previous step, restart the system.

Modifying the Number of Open File Descriptors

Open the /etc/security/limits.conf file and change the existing values for "hard" and "soft" parameters as follows. Restart the system after making changes.

Note: If the current value for any parameter is higher than the value listed in this document, then do not change the value of that parameter.

* hard nofile 65535 * soft nofile 4096 * hard nproc 16384 * soft nproc 2047

OS Library Patch for Oracle HTTP Server (on Oracle Linux 5 and RHEL 5 only)

Download and apply the patch 6078836 from My Oracle Support to fix an issue with the Oracle HTTP Server (missing libdb.so.2) bundled with the E-Business Suite technology stack. Note that this patch (which includes a required operating system library) must be applied before installing Oracle E-Business Suite.

Link to Motif library for Oracle Application Server 10.1.2 (on Oracle Linux 5 and RHEL 5 only)

Perform the following command (as root on your system) to update a required link to a Motif library prior to relinking or patching the 10.1.2 Application Server Oracle Home:

# unlink /usr/lib/libXtst.so.6# ln -s /usr/X11R6/lib/libXtst.so.6.1 /usr/lib/libXtst.so.6

Without this updated link, you may see the following errors during a relink of the 10.1.2 Oracle Home:

/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'

Since the ldconfig command overrides this link, the above link command (ln) will have to be re-issued after running the ldconfig command.

Before Installing or Upgrading

If the Release 12.1.1 installation or upgrade is performed with the Rapid Install wizard (either a new R12 installation or upgrade from 11i to R12), ensure you have the latest Rapid Install patch as described in Oracle Applications Release Notes, Release 12.1.1 (My Oracle Support Doc 798258.1) before you begin your installation or upgrade.

Complete all operating system requirements, software requirements, and other requirements before installing or upgrading Oracle E-Business Suite.

OPMN port conflict

Attention: By default, the OPMN service of the Application Server technology stack listens on port 6000 when started up during Rapid Install. This can conflict with the X11 port used for the graphics console on Linux servers and prevent Rapid Install from completing.

To address this issue, perform the following steps before installing or upgrading:

Check if the port 6000 is being used ("netstat -a | grep 6000") If so, you should disable the graphics console login process on the Linux server. This can be accomplished by logging in as root and

issuing the following commands:

o Find the process that uses port 6000 by the command "lsof -i TCP:6000".

o Use "kill -9" to abort the process found in the previous step

o Confirm that nothing is listening at port 6000 ("netstat -a | grep 6000")

o Modify /etc/inittab by changing "id:5:initdefault:" to "id:3:initdefault:"

o Run "/sbin/init 3" to restart dtlogin

Unset environment variable before installing (for SLES 10 only)

Unset the ENV environment variable prior to installing (to avoid failure of the registration of the 10.1.2 Oracle Home during install):

$ unset ENV

Installing or Upgrading

Perform the installation or upgrade following the documentation (Oracle E-Business Suite Installation Guide: Using Rapid Install, Oracle E-Business Suite Upgrade Guide: Release 11i to Release 12.1.1 or Oracle E-Business Suite Release 12.1.1 Maintenance Pack instructions) relevant to the specific installation or upgrade scenario described above.

After Installing or Upgrading

Perform the following steps after installing or upgrading to Release 12.1.1 and before allowing users to access the system.

Relink Advanced Supply Chain Planning executables (for SLES 10 and Oracle Linux/RHEL 5.4 or higher only)

During the relink phase of the installation of EBS Release 12 (12.1.1) on SLES 10 or Oracle Linux/RHEL 5.4 (Update 4 or higher), failures will result while relinking the Advanced Supply Chain Planning (ASCP) executables. To fix this problem, users are required to replace the following line under the Linux section of the $AD_TOP/bin/adrelinknew.sh:

CPP_LDFLAGS=' -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -lclntsh'

with

CPP_LDFLAGS=' -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -lclntsh -Wl,--noinhibit-exec'

After making this change, users are then required to run the adadmin utility and relink application executables.

Additional Information: The application of an EBS Release Update Pack (RUP) or AD family pack could over-write the adrelinknew.sh file - users must then re-edit and make changes to the above file in order to avoid relinking failures.

 

LD_LIBRARY_PATH Environment Variable

Dynamic libraries are used as part of the relinking and execution processes. The LD_LIBRARY_PATH environment variable is used by Oracle E-Business Suite to locate the required dynamic libraries at runtime - this variable is set by the Rapid Install wizard during the installation of EBS as well as by the Rapid Clone script (adcfgclone) when configuring the target system.

If you need to change these values, use the Edit Parameters function of the OAM AutoConfig tool (by logging in as 'System Administrator' responsibility, clicking on 'System Administrator', selecting 'AutoConfig' under 'Oracle Applications Manager', and clicking on the 'Environments' tab):

On each application tier server node:

LD_LIBRARY_PATH is set in three places:

$APPL_TOP/admin/adovars.env $ORA_CONFIG_HOME/10.1.2/[CONTEXT_NAME].env, in the 10.1.2 Oracle home directory

$ORA_CONFIG_HOME/10.1.3/[CONTEXT_NAME].env, in the 10.1.3 Oracle home directory

In the AutoConfig interface, this corresponds to:

Location Parameter

adovars LD_LIBRARY_PATH

tools_home (10.1.2) LD_LIBRARY_PATH

web_home (10.1.3) LD_LIBRARY_PATH

On the database server node:

LD_LIBRARY_PATH is set in $ORACLE_HOME/[CONTEXT_NAME].env which corresponds in the AutoConfig interface to:

Location Parameter

db_home LD_LIBRARY_PATH

After making these changes, run AutoConfig (adautocfg.sh) to implement the changes on the application and database tiers.

Additional Information: See AutoConfig in Oracle E-Business Suite Maintenance Utilities for more information on AutoConfig.

Net Service Listeners in Multi-user Installations

Net Service Listeners use the /var/tmp.oracle directory to store temporary files. To give all users in a multi-user installation write privileges, update /var/tmp/.oracle with 777 permissions:

$ chmod 777 /var/tmp/.oracle

Change Record

The following sections were changed in this document.

Date Summary of Changes

07-Feb-2011

Added compat-glibc-headers-2.3.4-2.26, glibc-headers-2.5-12 and kernel-headers-2.6.18-128.el5

20-Jan-2011

Added note about the need to re-edit the adrelinknew.sh file if it is overwritten during the application of a RUP or AD family pack.

15-Oct-2010

Added opmn port conflict workaround

14-Sep-2010

Added clarification of shmmax kernel parameter on the db tier

16-Jul-2010

Added Profitability Manager as a product requiring ld version 2.17 for OEL/RHEL 5

1-Jul-2010 Clarified that LD_LIBRARY_PATH is also set by Rapid Clone when configuring the target system.

25-Jun-2010

Added note that SLES 10 SP3 replaced compat-libstdc++ with libstdc++; cleaned up references of 'Oracle Applications' to 'Oracle E-Business Suite'; cleaned up description of LD_LIBRARY_PATH setting

23-Mar-2010

Added clarification that the HTTP Server patch from AS must be applied before installing EBS.

13-Oct-2009

Added workaround for OEL/RHEL 5 Update 4 (5.4) to relink ASCP

03-Aug-2009

Added binutil version requirement for RHEL5/OEL5 Update 3 (5.3)

27-Apr-2009

Initial publication of 12.1.1 IUN - for the older 12.0.4 IUN changes, please see My Oracle Support Doc 402310.1

Documentation Accessibility

Our goal is to make Oracle products, services, and supporting documentation accessible, with good usability, to the disabled community. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For additional information, visit the Oracle Accessibility Program Web site at:

http://www.oracle.com/accessibility/

Accessibility of Code Examples in Documentation

JAWS, a Windows screen reader, may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, JAWS may not always read a line of text that consists solely of a bracket or brace.

Accessibility of Links to External Web Sites in Documentation

This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.

TTY Access to Oracle Support Services

Oracle provides dedicated Text Telephone (TTY) access to Oracle Support Services within the United States of America 24 hours a day, 7 days a week. For TTY support, call 800.446.2398. Outside the United States, call +1.407.458.2479.

Oracle E-Business Suite Installation and Upgrade Notes, Release 12 (12.1.1) for Linux (32-bit)

Copyright © 2009, Oracle. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this software or related documentation is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT RIGHTS

Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065.

This software is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications which may create a risk of personal injury. If you use this software in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy and other measures to ensure the safe use of this software. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software in dangerous applications.

This software and documentation may provide access to or information on content, products and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third party content, products and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third party content, products or services.

Related

Products

Oracle E-Business Suite > Applications Technology > Lifecycle Management > Oracle Application Install

Errors

XP-1

Back to top

Rate this document  

Article Rating Rate this document

Excellent

Good

Poor

Did this document help you?

Yes

No

Just browsing

How easy was it to find this document?

Very easy

Somewhat easy

Not easy

Comments

Important Note: this feedback may be anonymously visible to other customers until processed by Oracle Support.

Cancel