Upload
ngodung
View
219
Download
0
Embed Size (px)
Citation preview
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.comPage 12 08/17
ORDIC FIBERGLASS, INC.
Features:• Rust free fiberglass construction and stainless steel hardware.• The exterior Munsell green coating which contains UV stabilizer and
provides superior weather-ability and resistance to ultraviolet attack.• P-107 stainless steel locking system with a silicon bronze penta-
head bolt provides double locking.• Stainless steel self locking cam arm holds lid open.• Optional copper grounding is available.• Typically installed as a one piece unit, the customer can unbolt
the cabinet from the ground sleeve thus enabling the ground sleeve to be installed during construction without subjecting the cabinet to accidental damage. After construction is over, the cabinet can be installed on the ground sleeve.
• Meets ANSI C57.12.28 Pad-Mounted Enclosure Integrity Standard.
ND-22022 Series:• Two-piece design: Cabinet is produced of SMC, (Sheet Molding
Compound). • Ground sleeve is produced of fire-retardant resin and a combina-
tion of chopped glass spray-up and hand lay-up using woven roving glass reinforcement, which adds greatly to their strength.
• Hot-dipped galvanized MP-125 mounting plate accommodates a 2, 3, or 4 pt., 15/25 kV, 200/600Amp junction with U-straps, except Cooper 35kV.
• Does not accommodate 200A taps off of the 600A junction. • Below parking allows for stand-offs or feed throughs to be installed.
ND-23222 Series:• Two-piece design: Cabinet and ground sleeve are produced of fire-
retardant resin and a combination of chopped glass spray-up and hand lay-up using woven roving glass reinforcement, which adds greatly to their strength.
• Hot-dipped galvanized MP-112 mounting plate accommodates a 2, 3, or 4 pt., 15/25 kV, 200/600Amp junction with U-straps, except Cooper 35kV.
• In-line parking allows for stand-offs or feed throughs to be installed.
Cabinets, 1 Phase Sectionalizing
15/25kV 200Amp Single Phase Sectionalizing Cabinets
15/25kV 200Amp Single Phase Sectionalizing Cabinets
Parking Top Width
Top Depth
Cabinet Height
Hot Stick Operating
Depth
Recommended Burial Depth
ND-2202248-MG-125-X-X Below 21” 21” 48” 22Finish grade approximately 6” below locking system.
ND-2322248-MG-112-X-X In-Line 32.5” 32.5” 48” 20.5”
ND-2202248-MG-125-X-X
ND-2322248-MG-112-X-X
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.com Page 1308/17
ORDIC FIBERGLASS, INC.
ND-322864-MG-PA38-X-X
15/25/35kV 600Amp Single Phase Sectionalizing Cabinet Features: ND-322864-MG-PA38-X-X• Rust free fiberglass construction and stainless steel hardware.• Nordic cabinets are produced of fire-retardant resin and a combination
of chopped glass spray-up and hand lay-up using woven roving glass reinforcement, which adds greatly to their strength.
• The exterior is applied with a Munsell green gel-coat, which contains UV stabilizer and provides superior weather-ability and resistance to ultraviolet attack.
• P-107 stainless steel locking system with a silicon bronze penta-head bolt provides double locking.
• Optional copper grounding is available.• Meets ANSI C57.12.28 Pad-Mounted Enclosure Integrity Standard.• One-piece design, ground sleeve is part of the cabinet.• Aluminum PA/PB 38 mounting plate accommodates a single
15/25/35kV 200/600Amp junction with U-straps, (accommodates 200A taps), including Cooper 35kV 200A/600A junctions.
• The sliding rail on the PA38 or PB38 allows for stand-offs or feed throughs to be installed on the stainless steel parking stands either above or below.
Benefits:• Pulling elbows with a hot stick is made easier with the adjustable
12°-20° mounting bracket found on the PA or PB38 mounting plates.• Rotational lid rotates on pivot bolts creating a lower center of gravity
that reduces the force required to open the cabinet.• The wide open lid allows cable pulling equipment to be used inside
of the cabinet with no interference.• Hot-stick operators have open access to elbows with no lid
interference from the top, front, or sides.• The cabinet’s four eyebolts allow the lineperson to simply hook-up
the cabinet, position it over the cables, and place it in the excavated area.
15/25/35kV 600Amp Single Phase Sectionalizing Cabinet
Parking Top Width
Top Depth
Cabinet Height
Hot Stick Operating
Depth
Recommended Burial Depth
ND-322864-MG-PA38-X-X Above 38” 29.5” 64” 25.5”
Finish grade approximately
6” below locking system.
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.comPage 14 08/17
ORDIC FIBERGLASS, INC.
ND-301830-MG-102A-X-X
Features: ND-301830-MG-102A-X-X
• Rust free fiberglass construction and stainless steel hardware.• Nordic cabinets are produced of fire-retardant resin and a
combination of chopped glass spray-up and hand lay-up using woven roving glass reinforcement, which adds greatly to their strength.
• The exterior is applied with a Munsell green gel-coat, which contains UV stabilizer and provides superior weather-ability and resistance to ultraviolet attack.
• P-107 stainless steel locking system with a silicon bronze penta-head bolt provides double locking.
• Optional copper grounding is available.• Meets ANSI C57.12.28 Pad-Mounted Enclosure Integrity
Standard.• Two-piece design: ND-301830-MG-102A-X-X requires a ground
sleeve.• Cabinet and ground sleeve are shipped separately and require
assembly upon receipt (hardware included).• Optional Ground Sleeves:
• CGS-30-18-18-MG-21x10• GS-30-18-24-MG-20x9 • GS-30-18-30-MG-21x10
• Hot-dipped galvanized MP-102A mounting plate (also avail-able in stainless steel) accommodates a 2, 3, or 4 pt., 15/25 kV, 200/600Amp junction with U-straps, except Cooper 35kV. In-line parking allows for stand-offs or feed throughs to be installed.
• Does not accommodate 200A taps off of the 600A junction. • ND-301830-MG-102A-X-X includes a lid, this lid is attached to the
top flange of the cabinet with an interlocking stainless steel channel.
15/25kV 200Amp Pad or GS Mount Cabinet
Parking Top Width
Top Depth
Cabinet Height
Hot Stick Operating
Depth
Recommended Burial Depth
ND-301830-MG-102A-X-X In-Line 30” 19.5” 31” 19” GS Required
15/25kV 200Amp GS Mount Single Phase Sectionalizing Cabinet
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.com Page 1508/17
ORDIC FIBERGLASS, INC.
ND-130-MG-101-X-X
ND-150-MG-101-X-X
ND-120-MG-101-X-X
15/25kV 200Amp Pad Mount & Direct Bury Sectionalizing CabinetsFeatures:
• Rust free fiberglass construction and stainless steel hardware.• One-piece design, ground sleeve is part of the cabinet.• Nordic cabinets are produced of fire-retardant resin and a
combination of chopped glass spray-up and hand lay-up using woven roving glass reinforcement, which adds greatly to their strength.
• The exterior is applied with a Munsell green gel-coat, which contains UV stabilizer and provides superior weather-ability and resistance to ultraviolet attack.
• Hot-dipped galvanized MP-101 mounting plate (also available in stainless steel) accommodates a 2, 3, or 4 pt., 15/25 kV, 200/600Amp junction with U-straps, except Cooper 35k. Below parking allows for stand-offs or feed throughs to be installed.
• Does not accommodate 200A taps off of the 600A junction.• P-107 stainless steel locking system with a silicon bronze
penta-head bolt provides double locking.• Stainless steel self locking cam arm holds lid open.• Stainless steel continuous hinge connects the lid to the
cabinet.• Optional copper grounding is available.• Meets ANSI C57.12.28 Pad-Mounted Enclosure Integrity Standard.
ND-120-MG-101-X-X:• ND-120-MG-101-X-X is used for pad-mount installations.• Cabinet anchor brackets (4x) are shipped attached to the
mounting plate for pad mounting.• Concrete anchoring hardware is not included.
ND-130-MG-101-X-X & ND-150-MG-101-X-X:• ND-130 and ND-150 cabinets are used for direct bury
installations.• The cabinet’s four eyebolts allow the lineperson to simply
hook-up the cabinet, position it over the cables, and place it in the excavated area.
15/25kV 200Amp Pad & Single Sectionalizing Cabinets (Direct Bury)
Parking Top Width
Top Depth
Cabinet Height
Hot Stick Operating
Depth
Recommended Burial Depth
ND-120-MG-101-X-X Below 23.5” 25.5” 35” 22” Pad Mount
ND-130-MG-101-X-X Below 24” 24.5” 37.5” 20.5” Finish grade approximately 6” below lock-ing system.
ND-150-MG-101-X-X Below 23.5” 25.5” 50” 22”
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.comPage 16 08/17
ORDIC FIBERGLASS, INC.
ND-362436-MG-110-X-X
ND-362442-MG-110-X-X
ND-362454-MG-110-X-X
Features:ND-3624 Series:
• Rust free fiberglass construction.• One-piece design, ground sleeve is part of the
cabinet.• Nordic cabinets are produced of fire-retardant resin and a com-
bination of chopped glass spray-up and hand lay-up using woven roving glass reinforcement, which adds greatly to their strength.
• The exterior is applied with a Munsell green gel-coat, which contains UV stabilizer and provides superior weather-ability and resistance to ultraviolet attack.
• Hot-dipped galvanized MP-110 mounting plate accommodates a 2, 3, or 4 pt., 15/25 kV, 200/600Amp junction with U-straps, except Cooper 35kV. In-line parking to allow for stand-offs or feed throughs to be installed.
• Does not accommodate 200A taps off of the 600A junction.• P-107 stainless steel locking system with a silicon bronze
penta-head bolt provides double locking.• Optional copper grounding is available.• ND-362436-MG-110 X-X can be used for pad-mount or direct
bury installations.• Concrete anchoring hardware is not included.• Meets ANSI C57.12.28 Pad-Mounted Enclosure Integrity
Standard.Benefits:
• Rotational lid rotates on pivot bolts creating a lower center of gravity that reduces the force required to open the cabinet.
• The wide open lid allows cable pulling equipment to be used inside of the cabinet with no interference.
• Hot-stick operators have open access to elbows with no lid interference from the top, front, or sides.
• The cabinet’s four eyebolts allow the lineperson to simply hook-up the cabinet, position it over the cables, and place it in the excavated area.
15/25kV 200Amp Single Phase Sectionalizing Cabinets
15/25kV 200Amp Single Phase Sectionalizing Cabinets
Parking Top Width Top Depth Cabinet Height Hot Stick Operating Depth
Recommended Burial Depth
ND-362436-MG-110-X-X In-Line 36.5” 23” 36.5” 23” Pad
ND-362442-MG-110-X-X In-Line 36.5” 23” 42.5” 23” Finish grade approximately 6” below
locking system.ND-362454-MG-110-X-X In-Line 36.5” 23” 55” 23”