ANALYSIS AND DESIGN OF A BRIDGE I-SECTION BEAM

Original Research Paper

B.K. Vishwanath Assistant professor, Department of Civil engineering, Dr K.V. Subba Reddy institute of Technology, Kurnool AP, India

X 645GJRA - GLOBAL JOURNAL FOR RESEARCH ANALYSIS

IF : 4.547 | IC Value 80.26 Volume : 3 | Issue : 11 | November 2014 • ISSN No 2277 - 8179VOLUME-6, ISSUE-8, AUGUST-2017 • ISSN No 2277 - 8160

Composite bridge is a structure with a combination two different materials reinforced concrete and Steel. In the composite bridge is designed by T beams are 2m I sections. on the I sections lateral girders are placed and on that

RCC slab is laid. The shear connectors are connected between I sections and the RCC slab. These shear connectors will act as a mediator and control the shear between them. In this we considered IRC class AA tracked loading. The review of a design is given below. We follow the code book of IRC 6-2000 for Road loading standards.

KEYWORDS :

ABSTRACT

Engineering

IF : 4.547 | IC Value 80.26Volume : 3 | Issue : 11 | November 2014 • ISSN No 2277 - 8179VOLUME-6, ISSUE-8, AUGUST-2017 • ISSN No 2277 - 8160

646 X GJRA - GLOBAL JOURNAL FOR RESEARCH ANALYSIS

IF : 4.547 | IC Value 80.26 Volume : 3 | Issue : 11 | November 2014 • ISSN No 2277 - 8179VOLUME-6, ISSUE-8, AUGUST-2017 • ISSN No 2277 - 8160

X 647GJRA - GLOBAL JOURNAL FOR RESEARCH ANALYSIS

IF : 4.547 | IC Value 80.26Volume : 3 | Issue : 11 | November 2014 • ISSN No 2277 - 8179VOLUME-6, ISSUE-8, AUGUST-2017 • ISSN No 2277 - 8160

648 X GJRA - GLOBAL JOURNAL FOR RESEARCH ANALYSIS

IF : 4.547 | IC Value 80.26 Volume : 3 | Issue : 11 | November 2014 • ISSN No 2277 - 8179VOLUME-6, ISSUE-8, AUGUST-2017 • ISSN No 2277 - 8160

X 649GJRA - GLOBAL JOURNAL FOR RESEARCH ANALYSIS

IF : 4.547 | IC Value 80.26Volume : 3 | Issue : 11 | November 2014 • ISSN No 2277 - 8179VOLUME-6, ISSUE-8, AUGUST-2017 • ISSN No 2277 - 8160

650 X GJRA - GLOBAL JOURNAL FOR RESEARCH ANALYSIS