ORIGINAL SAMPLE Intertek India Private Ltd.5NM-eBIL.pdf · 290, Udyog Vihar, Phase-II, Gurgaon, Haryana -122016. Tel : 0124-4503400, Fax : 0124-4303592. Registered Office : E-20,

TEST REPORT NUMBER : DELY18002471

DATE : 13TH JULY, 2018

Page 1 of 10

Intertek India Private Ltd. 290, Udyog Vihar, Phase-II, Gurgaon, Haryana -122016.

Tel : 0124-4503400, Fax : 0124-4303592. Registered Office : E-20, Block B-1, Mohan Co-Operative Industrial Area, Mathura Road, New Delhi -110044. Web site : www.intertek-labtest.com.

ORIGINAL SAMPLE

http://ww.intertek-labtest.com./



Page 2 of 10



TESTED COMPONENTS




Page 3 of 10



APPLICANT: GRASPER GLOBAL PRIVATE LIMITED 222A PODAR CHAMBERS, 109 S.A. BRELVI ROAD, FORT, MUMBAI – 400001, MAHARASHTRA, INDIA. ATT.: Mr. DHVANIL SHETH

SAMPLE DESCRIPTION : THE SUBMITTED SAMPLE SAID TO BE- 1) ALPHABET BIG AND SMALL 2) BOREDOM

BUSTER 3) PRESCHOOL CHAMPION 4) BRAIN GAMES 5) DOODLE AND DRAW 6) SPACE EXPLORERS 7) TIMES TABLES 8) TRANSPORT OFF WE GO 9) ANIMAL KINGDOM 10) PRE MATH AND NUMBERS 11) TIME AND MONEY 12) SKILL GAMES 13) SHAPES & PATTERNS 14) BOREDOM BUSTER SENIOR 15) ART SMART 16) MATH MASTER 17) I CAN WRITE 18) DOTS AND MAZES 19) INTERACTIVE STORIES 20) ENGLISH EXPRESS 21) MIND CHALLENGE 22) PLACES AROUND US 23) EVERYDAY INVENTIONS 24) INCREDIBLE INDIA 25) ALPHABET AND NUMBERS 26) HINDI CHAMPION. DATE RECEIVED : 26th JUNE, 2018 AGE GRADE LABELLED : (6-99 YEARS) - (4); (12); (21). (6-9 YEARS) - (5); (6); (7); (11); (14); (16); (20); (23); (24). (3-6 YEARS) - (1); (2); (3); (8); (9); (10); (13); (15); (17); (18); (19); (22); (25). (5-8 YEARS) - (26) TESTED AGE GRADE : 3 YEARS + BUYER NAME : -- COLOR : MULTI STYLE NO. : 1) SKILL01ABB; 2) SKILL02BBS; 3) SKILL03PCB; 4) SKILL04BGS; 5) SKILL05DDB;

6) SKILL06SEB; 7) SKILL07TTS; 8) SKILL08TOS; 9) SKILL09AKB; 10) SKILL10PNB; 11) SKILL11TMB; 12) SKILL12SGB; 13) SKILL13SPS; 14) SKILL14BBS; 15) SKILL15ASB; 16) SKILL16MMB; 17) SKILL17CWB; 18) SKILL18DMS; 19) SKILL19ISB; 20) SKILL20EEB; 21) SKILL21MCS; 22) SKILL22PAB; 23) SKILL23EIB; 24) SKILL24IIB; 25) SKILL25ANB 26) SKILL26HCB.

END USE : TOYS AND GAMES (EDUCATIONAL) MANUFACTURES NAME : PARKSONS PACKAGING LIMITED. PLACE OF MANUFACTURING : DAMAN, INDIA. DATE OF MANUFACTURING : DECEMBER 2017

TEST CONDUCTED: AS PER THE REQUEST OF THE APPLICANT. FOR FURTHER DETAILS, SEE ATTACHED PAGES.

CONCLUSION:

TEST STANDARD

RESULT

1) ALPHABET BIG AND SMALL 2) BOREDOM

BUSTER 3) PRESCHOOL CHAMPION 4) BRAIN GAMES 5) DOODLE AND DRAW 6) SPACE

EXPLORERS 7) TIMES TABLES 8) TRANSPORT OFF WE GO 9) ANIMAL KINGDOM 10) PRE

MATH AND NUMBERS 11) TIME AND MONEY 12) SKILL GAMES 13) SHAPES &

PATTERNS 14) BOREDOM BUSTER SENIOR 15) ART SMART 16) MATH MASTER

17) I CAN WRITE 18) DOTS AND MAZES

ASTM F963 - 17 (STANDARD CONSUMER SAFETY SPECIFICATION

FOR TOY SAFETY) M

TRACKING LABEL EVLAUATION AS PER CPSIA SEC-103

M

TOTAL LEAD CONTENT (CPSIA) (CPSC-CH-E1002-08.1)

M




Page 4 of 10



19) INTERACTIVE STORIES 20) ENGLISH EXPRESS 21) MIND CHALLENGE 22) PLACES

AROUND US 23) EVERYDAY INVENTIONS 24) INCREDIBLE INDIA 25) ALPHABET AND

NUMBERS 26) HINDI CHAMPION.

PHTHALATE (CPSIA) (CPSC-CH-C1001-09.3)

M

NOTE: M = MEET REQUIREMENT, NM/ F = DOES NOT MEET REQUIREMENT # = NO SPECIFIC REQUIREMENT, NA = NOT APPLICABLE REMARK:

1. TESTING HAS BEEN CONDUCTED AS PER THE CLIENT’S REQUEST. 2. THE TEST HAS BEEN PERFORMED ON STYLE NO. SKILL25ANB (ALPHABET AND NUMBERS) AND STYLE NO.

SKILL02BBS (BOREDOM BUSTER)

PREPARED BY FOR INTERTEK INDIA PVT. LTD

ASHISH ASST.MANAGER – TOYS & HARDLINES

CHECKED BY FOR INTERTEK INDIA PVT. LTD

SANJAY SADANA

MANAGER – TOYS & HARDLINES




Page 5 of 10



TESTS CONDUCTED: Note-1 AS SPECIFIED IN ASTM F963 - 17: STANDARD CONSUMER SAFETY SPECIFICATION ON TOYS SAFETY. Tested Age Grade: 3 years +

Clause Test Item Results

4.1 Material quality P

4.2 Flammability P (See Note 3)

4.3.5 Heavy Elements P

4.3.5.1 Paint and Similar Surface-Coating Materials NA

4.3.5.2 Heavy Metal in Substrate Material P (See Note 4)

4.3.7 Stuffing materials NA

4.4 Electrical /Thermal Energy NA

4.5 Sound producing toys NA

4.6 Small Part NA

4.7 Accessible edges P

4.8 Projections NA

4.9 Accessible points P

4.10 Wires or rods NA

4.11 Nails and fasteners NA

4.12 Plastic film NA

4.13 Folding mechanisms and hinges NA

4.14 Cords, straps, and elastics NA

4.15 Stability and overload requirement NA

4.16 Confined spaces NA

4.17 Wheels, tires, and axles NA

4.18 Holes, clearance, and accessibility of mechanisms NA

4.19 Simulated protective devices NA

4.20 Pacifiers NA

4.21 Projectile toys NA

4.22 Teethers and teething toys NA

4.23 Rattles NA

4.24 Squeeze toys NA

4.25 Battery operated toys NA

4.26 Toys intended to be attached to a crib or playpen NA




Page 6 of 10




4.27 Stuffed and beanbag type toys NA

4.28 Stroller and carriage toys NA

4.29 Art materials NA

4.30 Toy Gun Marking NA

4.31 Balloons NA

4.32 Certain toys with nearly spherical ends NA

4.33 Marbles NA

4.34 Balls NA

4.35 Pompoms NA

4.36 Hemispherical shaped objects NA

4.37 Yo Yo elastic tether toys NA

4.38 Magnets NA

4.39 Jaw Entrapment in Handles and Steering Wheels NA

4.40 Expanding material NA

4.41 Toy Chest NA

5 LABELLING REQUIREMENTS

5.2 Age grade Labeling Present

5.3 Safety Labeling Requirements Present

5.4 Aquatic toys NA

5.5 Crib and playpen toys NA

5.6 Mobile NA

5.7 Stroller and carriage toys NA

5.8 Toys intended to be assembled by an adult NA

5.9 Simulated protective devices NA

5.10 Toys with functional sharp edges or points NA

5.11 Small objects, small balls, marbles, and balloons NA

5.12 Toy caps NA

5.13 Art materials NA

5.14 Electric toys NA


5.16 Promotional materials NA

5.17 Magnets NA




Page 7 of 10




6 INSTRUCTIONAL LITERATURE

6.1 Definition and description P

6.2 Crib and playpen toys NA

6.3 Mobiles NA

6.4 Toys intended to be assembled by an adult NA


6.6 Battery Powered Ride-on Toys NA

6.7 Toys in Contact with Food NA

6.8 Toy Chests NA

7 PRODUCER’S MARKING

7.1 Name (TOY) Address (TOY)

Present Present

7.2 Battery-Powered Ride-on Toys NA

7.3 TOY CHEST NA

Remark – 1. It is drawn to your attention that either a principal component of a toy or the package of a toy shall be marked with the name and address of the producer or the distributor. 2. Toy or Package should be Labeled to indicate the Minimum Age grade for intended Use. 3. The submitted samples were undergone the tests in accordance with section 8.5 on normal use, abuse and specific tests for different types of toys whichever is applicable. P: PASS, F: Fail, NA: Not Applicable, NT: Not Tested.

Note-2 TRACKING LABEL EVLAUATION AS PER CPSIA SEC-103 Tracking Label was found on the Packaging Tracking label is a Permanent Distinguish mark for identification of below information’s Name of Manufacturer/Importer/Private Labeler: Present Location of Production: Present Date Code: Present Made In country: Present

Packaging is the Part of product as Packaging is retainable confirmed by vendor and also shown in package. All required information are mentioned as per Tracking Label evaluation with ref to CPSIA sec-103 Note : The Tracking Label assessment was based on the Submitted sample and the Information Provided by the applicant. There was no Verification on the Validity of such information.




Page 8 of 10



Note 3 FLAMMABILITY TEST (Clause 4.2) Flammability Test on solid (AS PER ASTM F963 -17)

Sample Burning Rate (inch/sec)

Mats < 0.1

Sketch Pen < 0.1

(Remark- A material is considered “flammable” if it ignites and burns with a self-sustained flame at a rate greater than 0.1 inch/sec. along its major axis) IBE=Ignite But Self-Extinguished, DNI: Did Not Ignite

Note-4 ASTM F963-17, Clause 4.3.5.2/4.3.5.1 – Heavy Elements in Toys Substrate/coating Materials 1. Heavy Metals

Test Method: Sections 8.3.5/8.3.4 of the ASTM Standard Consumer Safety Specification for Toy Safety F963-17, acid extraction and analyzed by Inductively Coupled Argon Plasma Spectrometry.

Elements Pb Sb As Ba Cd Cr Hg Se

Results Migration Limit (ppm)-Other Than Modeling Clays

90 60 25 1000 75 60 60 500

Component Total Result(s) (ppm)

(1) <5 <5 <2.5 <5 <5 <5 <5 <5 Pass

(2) <5 <5 <2.5 <5 <5 <5 <5 <5 Pass

(3) <5 <5 <2.5 <5 <5 <5 <5 <5 Pass

(4) <5 <5 <2.5 <5 <5 <5 <5 <5 Pass

(5) <5 <5 <2.5 <5 <5 <5 <5 <5 Pass

(6) <5 <5 <2.5 <5 <5 <5 <5 <5 Pass

(7) <5 <5 <2.5 <5 <5 <5 <5 <5 Pass

(8) <5 <5 <2.5 <5 <5 <5 <5 <5 Pass

(9) <5 <5 <2.5 <5 <5 <5 <5 <5 Pass

(10) <5 <5 <2.5 <5 <5 <5 <5 <5 Pass

(11) <5 <5 <2.5 <5 <5 <5 <5 <5 Pass

(12) <5 <5 <2.5 <5 <5 <5 <5 <5 Pass

(13) <5 <5 <2.5 <5 <5 <5 <5 <5 Pass




Page 9 of 10



Tested Components:

1. Yellow Pen Cap Plastic 2. Black Body Plastic 3. Blue Body Plastic 4. Green Body Plastic 5. Mats 6. Red Body Plastic 7. Fabric with Printing 8. Instruction Sheet 9. Black Nib 10. Black Duster 11. Blue Nib 12. Green Nib 13. Red Nib

Note-5 Total Lead (Pb) Content As test method CPSC-CH-E1001-08.1, CPSC-CH-E1002-08.1 or/and CPSC-CH-E1003-09.1 was/were used and total Lead content was determined by Inductively Coupled Plasma Optical Emission Spectrometer.

Tested Component Result in ppm Limit (ppm)

(1) <10 100

(2) <10 100

(3) <10 100

(4) <10 100

ppm = parts per million = mg/kg Tested Component:

1. Yellow Plastic Cap 2. (Black + Blue) Body Plastic 3. (Green + Red) Body Plastic 4. Mats

Remark:1 The above limit was quoted according to US Consumer Product Safety Improvement Act 2008 for prohibition on sale of certain products containing specified lead




Page 10 of 10



Note-6 Phthalate Content Test As per Standard Operating Procedure for Determining Phthalates, test method CPSC-CH-C1001-09.3 was used and phthalate content was determined by Gas Chromatographic-Mass Spectrometric (GC-MS) analysis.

Compound

Result (%, w/w) Limit (%, w/w)

(max.) (1) (2) (3) (4) (5)

Dibutyl phthalate (DBP) <0.005 <0.005 <0.005 <0.005 <0.005 0.1

Diethylhexyl phthalate (DEHP) <0.005 <0.005 <0.005 <0.005 <0.005 0.1

Benzylbutyl phthalate (BBP) <0.005 <0.005 <0.005 <0.005 <0.005 0.1

Diisononyl phthalate (DINP) <0.005 <0.005 <0.005 <0.005 <0.005 0.1

Diisodecyl phthalate (DIDP) <0.005 <0.005 <0.005 <0.005 <0.005 0.1

di-n-hexyl phthalate (DHEXP/. DnHP) <0.005 <0.005 <0.005 <0.005 <0.005 0.1

Di-n-Octyl phthalate (DNOP) <0.005 <0.005 <0.005 <0.005 <0.005 0.1

Diisobutyl phthalate (DIBP) <0.005 <0.005 <0.005 <0.005 <0.005 0.1

Dicyclohexyl phthalate (DCHP) <0.005 <0.005 <0.005 <0.005 <0.005 0.1

Di-n-pentyl phthalate (DPENP) <0.005 <0.005 <0.005 <0.005 <0.005 0.1

Remark:3 The above limit was quoted according to US Consumer Product Safety Improvement Act 2008 for prohibition on sale of certain products containing specified phthalates. < = Less than Tested Component:

1. Yellow Pen Cap Plastic + Black Body Plastic + Blue Body Plastic 2. Green Body Plastic + Red Body Plastic + Mats 3. Black Nib + Blue Nib + Green Nib 4. Black Duster 5. Red Nib

******************************************************************************************* *END OF REPORT*

This report is made solely on the basis of your instructions and/or information and materials supplied by you. It is not intended to be a recommendation for any particular course of action. Intertek does not accept a duty of care or any other responsibility to any person other than the Client in respect of this report and only accepts liability to the Client insofar as is expressly contained in the terms and conditions governing Intertek's provision of services to you. Intertek makes no warranties or representations either express or implied with respect to this report save as provided for in those terms and conditions. We have aimed to conduct the Review on a diligent and careful basis and we do not accept any liability to you for any loss arising out of or in connection with this report, in contract, tort, by statute or otherwise, except in the event of our gross negligence or duct.


Documents

ORIGINAL SAMPLE Intertek India Private Ltd.5NM-eBIL.pdf · 290, Udyog Vihar, Phase-II, Gurgaon, Haryana -122016. Tel : 0124-4503400, Fax : 0124-4303592. Registered Office : E-20,