OTIS Technology's Ripcord - One Pass Cleaning System

Embed Size (px)

Citation preview

  • 7/27/2019 OTIS Technology's Ripcord - One Pass Cleaning System

    1/2

    FOG HORN 2013Twobirds Flying Publication

    Copyright 2013, Towbirds Flying Publication. All Rights Reserved.

    OTIS Technology Ripcord One

    pass to a clean bore

    By: Sal Palma

    As a former NG NCO one of the more difficult

    tasks on my plate was to inculcate the need for

    weapon cleanliness. For some ungodly reason,

    it was easier to motivate a troop to take a hill

    than it was to clean his weapon. I think part of

    the problem rests with the integral complexities

    of the Stoner design; there are simply a lot of

    things to deal with, especially when youre

    exhausted. But, stepping away from the military

    application for a moment, most shooters dont

    relish cleaning their weapons. If designers

    would include a self-cleaning feature, like and

    oven, theyd have a hit on their hands.

    However, the inescapable truth is that weapons

    function reliably only when they are afforded a

    reasonable level of maintenance.

    Through the travail of ages, weapon cleaning

    systems have evolved to a point where an

    operator now has at his disposal a complete

    multi-caliber cleaning system that he can carry

    in a pouch that is 2 to 3 inches in diameter.

    Weve also seen the rehash of an old concept,

    the bore snake.

    The bore snakes popularity stems from its ease

    of use, run it through the bore 5 or so passes

    and youve cleaned your weapon sufficiently to

    make you feel good about yourself. Tell me this

    is not so? I am guilty of that too, what can one

    say!

    Well, you can take that bore snake of yours and

    make a pair of shoes out of it because OTIS

    Technology, the big dog of weapon cleaning

    systems, has introduced a product they market

    as the RIPCORD.

    OTIS recognizes there are times in the field

    when you just cant perform thorough

    maintenance on your weapon system, and your

    needs are best served with a quick and effective

    way to clean your rifle or pistol. So, theyve

    created the RIPCORD to provide you with a tool

    that you can quickly access to clean your

    weapon. Like all ofOTIS cleaning systems, this

    one too adheres to the well-established Breech-

    to-Muzzle cleaning methodology. The

    RIPCORD is designed to accomplish the task in

    one pass. Thats right one pass!

    OTIS manufactures this cleaning tool on a

    molded rubberized core, which is then covered

  • 7/27/2019 OTIS Technology's Ripcord - One Pass Cleaning System

    2/2

    OTIS Technology Ripcord One pass to a clean bore 2013

    Copyright 2013, Twobirds Flying Publication, All Rights Reserved

    in Nomex fibers to form a semi rigid1 tool that

    is stiff enough to dislodge an obstruction in

    either bore or chamber. It provides 10 inches of

    cleaning surface. The NOMEX fibers are heat

    resistant to 700F, and stiff enough to act as

    both a brush and patch. RIPCORDs NOMEX

    cover is laid out in a helix pattern so it contacts

    lands and grooves efficiently.

    Lastly, the tool is terminated on both ends with

    8-32 threaded ends to fit all Otis cleaning

    components. Now, that really rocks, and

    uniquely differentiates OTIS product from all

    others.

    OTIS was gracious enough to provide us with a

    pistol caliber and rifle caliber sample, which I

    tried on a SIG I had sitting around with about

    200 rounds fired since the last cleaning.

    RIPCORD handled it like a BOSS.

    Using the OTIS RIPCORD is best done

    immediately after firing your weapon. As

    always, clear and make your weapon safe. You

    should then lock your bolt or slide open and

    pass the thin end of the cleaning tool through

    the bore breech-to-muzzle; pulling it through

    with one smooth motion.

    The bottom line? It works astoundingly well,

    and more importantly you can get back to

    shooting sooner!

    The RIPCORD is available in the following

    calibers .223/5.56mm, .30 cal, 9mm, .40 cal &

    .45 cal. At an M.S.R.P. of $14.99 you cant beatit with a stick and you/re getting OTIS quality in

    the process. I Love it and you will too.

    -SP

    1Please keep your mind out of the gutter.

    To purchase, visitOTIS Technology.

    http://www.otistec.com/pc_product_detail.asp?key=D02CEE2434924B0487AC6F36B4372810http://www.otistec.com/pc_product_detail.asp?key=D02CEE2434924B0487AC6F36B4372810http://www.otistec.com/pc_product_detail.asp?key=D02CEE2434924B0487AC6F36B4372810http://www.otistec.com/pc_product_detail.asp?key=D02CEE2434924B0487AC6F36B4372810